- 28 Oct, 2021 14 commits
-
-
Peter Zijlstra authored
Currently Linux prevents usage of retpoline,amd on !AMD hardware, this is unfriendly and gets in the way of testing. Remove this restriction. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.487348118@infradead.org
-
Peter Zijlstra authored
Make sure we can see the text changes when booting with 'debug-alternative'. Example output: [ ] SMP alternatives: retpoline at: __traceiter_initcall_level+0x1f/0x30 (ffffffff8100066f) len: 5 to: __x86_indirect_thunk_rax+0x0/0x20 [ ] SMP alternatives: ffffffff82603e58: [2:5) optimized NOPs: ff d0 0f 1f 00 [ ] SMP alternatives: ffffffff8100066f: orig: e8 cc 30 00 01 [ ] SMP alternatives: ffffffff8100066f: repl: ff d0 0f 1f 00 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.422273830@infradead.org
-
Peter Zijlstra authored
Try and replace retpoline thunk calls with: LFENCE CALL *%\reg for spectre_v2=retpoline,amd. Specifically, the sequence above is 5 bytes for the low 8 registers, but 6 bytes for the high 8 registers. This means that unless the compilers prefix stuff the call with higher registers this replacement will fail. Luckily GCC strongly favours RAX for the indirect calls and most (95%+ for defconfig-x86_64) will be converted. OTOH clang strongly favours R11 and almost nothing gets converted. Note: it will also generate a correct replacement for the Jcc.d32 case, except unless the compilers start to prefix stuff that, it'll never fit. Specifically: Jncc.d8 1f LFENCE JMP *%\reg 1: is 7-8 bytes long, where the original instruction in unpadded form is only 6 bytes. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.359986601@infradead.org
-
Peter Zijlstra authored
Handle the rare cases where the compiler (clang) does an indirect conditional tail-call using: Jcc __x86_indirect_thunk_\reg For the !RETPOLINE case this can be rewritten to fit the original (6 byte) instruction like: Jncc.d8 1f JMP *%\reg NOP 1: Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.296470217@infradead.org
-
Peter Zijlstra authored
Rewrite retpoline thunk call sites to be indirect calls for spectre_v2=off. This ensures spectre_v2=off is as near to a RETPOLINE=n build as possible. This is the replacement for objtool writing alternative entries to ensure the same and achieves feature-parity with the previous approach. One noteworthy feature is that it relies on the thunks to be in machine order to compute the register index. Specifically, this does not yet address the Jcc __x86_indirect_thunk_* calls generated by clang, a future patch will add this. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.232495794@infradead.org
-
Peter Zijlstra authored
Stick all the retpolines in a single symbol and have the individual thunks as inner labels, this should guarantee thunk order and layout. Previously there were 16 (or rather 15 without rsp) separate symbols and a toolchain might reasonably expect it could displace them however it liked, with disregard for their relative position. However, now they're part of a larger symbol. Any change to their relative position would disrupt this larger _array symbol and thus not be sound. This is the same reasoning used for data symbols. On their own there is no guarantee about their relative position wrt to one aonther, but we're still able to do arrays because an array as a whole is a single larger symbol. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.169659320@infradead.org
-
Peter Zijlstra authored
Because it makes no sense to split the retpoline gunk over multiple headers. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.106290934@infradead.org
-
Peter Zijlstra authored
Currently GEN-for-each-reg.h usage leaves GEN defined, relying on any subsequent usage to start with #undef, which is rude. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120310.041792350@infradead.org
-
Peter Zijlstra authored
Ensure the register order is correct; this allows for easy translation between register number and trampoline and vice-versa. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.978573921@infradead.org
-
Peter Zijlstra authored
Now that objtool no longer creates alternatives, these replacement symbols are no longer needed, remove them. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.915051744@infradead.org
-
Peter Zijlstra authored
Instead of writing complete alternatives, simply provide a list of all the retpoline thunk calls. Then the kernel is free to do with them as it pleases. Simpler code all-round. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.850007165@infradead.org
-
Peter Zijlstra authored
Any one instruction can only ever call a single function, therefore insn->mcount_loc_node is superfluous and can use insn->call_node. This shrinks struct instruction, which is by far the most numerous structure objtool creates. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.785456706@infradead.org
-
Peter Zijlstra authored
Assume ALTERNATIVE()s know what they're doing and do not change, or cause to change, instructions in .altinstr_replacement sections. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.722511775@infradead.org
-
Peter Zijlstra authored
In order to avoid calling str*cmp() on symbol names, over and over, do them all once upfront and store the result. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/r/20211026120309.658539311@infradead.org
-
- 06 Oct, 2021 1 commit
-
-
Peter Zijlstra authored
Fixup conflicts. # Conflicts: # tools/objtool/check.c
-
- 05 Oct, 2021 3 commits
-
-
Joe Lawrence authored
The section structure already contains sh_size, so just remove the extra 'len' member that requires extra mirroring and potential confusion. Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20210822225037.54620-3-joe.lawrence@redhat.com Cc: Andy Lavr <andy.lavr@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org
-
Joe Lawrence authored
Commit e31694e0 ("objtool: Don't make .altinstructions writable") aligned objtool-created and kernel-created .altinstructions section flags, but there remains a minor discrepency in their use of a section entry size: objtool sets one while the kernel build does not. While sh_entsize of sizeof(struct alt_instr) seems intuitive, this small deviation can cause failures with external tooling (kpatch-build). Fix this by creating new .altinstructions sections with sh_entsize of 0 and then later updating sec->sh_size as alternatives are added to the section. An added benefit is avoiding the data descriptor and buffer created by elf_create_section(), but previously unused by elf_add_alternative(). Fixes: 9bc0bb50 ("objtool/x86: Rewrite retpoline thunk calls") Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20210822225037.54620-2-joe.lawrence@redhat.com Cc: Andy Lavr <andy.lavr@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: linux-kernel@vger.kernel.org
-
Josh Poimboeuf authored
Converting a special section's relocation reference to a symbol is straightforward. No need for objtool to complain that it doesn't know how to handle it. Just handle it. This fixes the following warning: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/feadbc3dfb3440d973580fad8d3db873cbfe1694.1633367242.git.jpoimboe@redhat.com Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Cc: Miroslav Benes <mbenes@suse.cz> Cc: linux-kernel@vger.kernel.org
-
- 03 Oct, 2021 12 commits
-
-
Linus Torvalds authored
-
Chen Jingwen authored
In commit b212921b ("elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings") we still leave MAP_FIXED_NOREPLACE in place for load_elf_interp. Unfortunately, this will cause kernel to fail to start with: 1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already Failed to execute /init (error -17) The reason is that the elf interpreter (ld.so) has overlapping segments. readelf -l ld-2.31.so Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000002c94c 0x000000000002c94c R E 0x10000 LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0 0x00000000000021e8 0x0000000000002320 RW 0x10000 LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00 0x00000000000011ac 0x0000000000001328 RW 0x10000 The reason for this problem is the same as described in commit ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments"). Not only executable binaries, elf interpreters (e.g. ld.so) can have overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go back to MAP_FIXED in load_elf_interp. Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: <stable@vger.kernel.org> # v4.19 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a number of ext4 bugs in fast_commit, inline data, and delayed allocation. Also fix error handling code paths in ext4_dx_readdir() and ext4_fill_super(). Finally, avoid a grabbing a journal head in the delayed allocation write in the common cases where we are overwriting a pre-existing block or appending to an inode" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: recheck buffer uptodate bit under buffer lock ext4: fix potential infinite loop in ext4_dx_readdir() ext4: flush s_error_work before journal destroy in ext4_fill_super ext4: fix loff_t overflow in ext4_max_bitmap_size() ext4: fix reserved space counter leakage ext4: limit the number of blocks in one ADD_RANGE TLV ext4: enforce buffer head state assertion in ext4_da_map_blocks ext4: remove extent cache entries when truncating inline data ext4: drop unnecessary journal handle in delalloc write ext4: factor out write end code of inline file ext4: correct the error path of ext4_write_inline_data_end() ext4: check and update i_disksize properly ext4: add error checking to ext4_ext_replay_set_iblocks()
-
Linus Torvalds authored
The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The recent change to make objtool aware of more symbol relocation types (commit 24ff6525: "objtool: Teach get_alt_entry() about more relocation types") also added another check, and resulted in this objtool warning when building kvm on x86: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception The reason seems to be that kvm_fastop_exception() is marked as a global symbol, which causes the relocation to ke kept around for objtool. And at the same time, the kvm_fastop_exception definition (which is done as an inline asm statement) doesn't actually set the type of the global, which then makes objtool unhappy. The minimal fix is to just not mark kvm_fastop_exception as being a global symbol. It's only used in that one compilation unit anyway, so it was always pointless. That's how all the other local exception table labels are done. I'm not entirely happy about the kinds of games that the kvm code plays with doing its own exception handling, and the fact that it confused objtool is most definitely a symptom of the code being a bit too subtle and ad-hoc. But at least this trivial one-liner makes objtool no longer upset about what is going on. Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Cc: Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.15-rc4. They are in two "groups": - ipack driver fixes for issues found by Johan Hovold - interconnect driver fixes for reported problems All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ipack: ipoctal: fix module reference leak ipack: ipoctal: fix missing allocation-failure check ipack: ipoctal: fix tty-registration error handling ipack: ipoctal: fix tty registration race ipack: ipoctal: fix stack information leak interconnect: qcom: sdm660: Add missing a2noc qos clocks dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg
-
Linus Torvalds authored
Merge tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core and kernfs fixes for reported issues for 5.15-rc4. These fixes include: - kernfs positive dentry bugfix - debugfs_create_file_size error path fix - cpumask sysfs file bugfix to preserve the user/kernel abi (has been reported multiple times.) - devlink fixes for mdiobus devices as reported by the subsystem maintainers. Also included in here are some devlink debugging changes to make it easier for people to report problems when asked. They have already helped with the mdiobus and other subsystems reporting issues. All of these have been linux-next for a while with no reported issues" * tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: also call kernfs_set_rev() for positive dentry driver core: Add debug logs when fwnode links are added/deleted driver core: Create __fwnode_link_del() helper function driver core: Set deferred probe reason when deferred by driver core net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD driver core: fw_devlink: Improve handling of cyclic dependencies cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf debugfs: debugfs_create_file_size(): use IS_ERR to check for error
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: - Tell the compiler to always inline is_percpu_thread() - Make sure tunable_scaling buffer is null-terminated after an update in sysfs - Fix LTP named regression due to cgroup list ordering * tag 'sched_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Always inline is_percpu_thread() sched/fair: Null terminate buffer when updating tunable_scaling sched/fair: Add ancestors of unthrottled undecayed cfs_rq
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Make sure the destroy callback is reset when a event initialization fails - Update the event constraints for Icelake - Make sure the active time of an event is updated even for inactive events * tag 'perf_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: fix userpage->time_enabled of inactive events perf/x86/intel: Update event constraints for ICX perf/x86: Reset destroy callback on event init failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Borislav Petkov: - Handle symbol relocations properly due to changes in the toolchains which remove section symbols now * tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Teach get_alt_entry() about more relocation types
-
Linus Torvalds authored
Merge tag 'hwmon-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fixed various potential NULL pointer accesses in w8379* drivers - Improved error handling, fault reporting, and fixed rounding in thmp421 driver - Fixed error handling in ltc2947 driver - Added missing attribute to pmbus/mp2975 driver - Fixed attribute values in pbus/ibm-cffps, occ, and mlxreg-fan drivers - Removed unused residual code from k10temp driver * tag 'hwmon-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller hwmon: (pmbus/ibm-cffps) max_power_out swap changes hwmon: (occ) Fix P10 VRM temp sensors hwmon: (ltc2947) Properly handle errors when looking for the external clock hwmon: (tmp421) fix rounding for negative values hwmon: (tmp421) report /PVLD condition as fault hwmon: (tmp421) handle I2C errors hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs hwmon: (k10temp) Remove residues of current and voltage
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: "Eleven fixes for the ksmbd kernel server, mostly security related: - an important fix for disabling weak NTLMv1 authentication - seven security (improved buffer overflow checks) fixes - fix for wrong infolevel struct used in some getattr/setattr paths - two small documentation fixes" * tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd: ksmbd: missing check for NULL in convert_to_nt_pathname() ksmbd: fix transform header validation ksmbd: add buffer validation for SMB2_CREATE_CONTEXT ksmbd: add validation in smb2 negotiate ksmbd: add request buffer validation in smb2_set_info ksmbd: use correct basic info level in set_file_basic_info() ksmbd: remove NTLMv1 authentication ksmbd: fix documentation for 2 functions MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entry ksmbd: fix invalid request buffer access in compound ksmbd: remove RFC1002 check in smb2 request
-
- 02 Oct, 2021 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Five fairly minor fixes and spelling updates, all in drivers. Even though the ufs fix is in tracing, it's a potentially exploitable use beyond end of array bug" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: csiostor: Add module softdep on cxgb4 scsi: qla2xxx: Fix excessive messages during device logout scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported" scsi: ses: Fix unsigned comparison with less than zero scsi: ufs: Fix illegal offset in UPIU event trace
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few block fixes for this release: - Revert a BFQ commit that causes breakage for people. Unfortunately it was auto-selected for stable as well, so now 5.14.7 suffers from it too. Hopefully stable will pick up this revert quickly too, so we can remove the issue on that end as well. - Add a quirk for Apple NVMe controllers, which due to their non-compliance broke due to the introduction of command sequences (Keith) - Use shifts in nbd, fixing a __divdi3 issue (Nick)" * tag 'block-5.15-2021-10-01' of git://git.kernel.dk/linux-block: nbd: use shifts rather than multiplies Revert "block, bfq: honor already-setup queue merges" nvme: add command id quirk for apple controllers
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Two fixes in here: - The signal issue that was discussed start of this week (me). - Kill dead fasync support in io_uring. Looks like it was broken since io_uring was initially merged, and given that nobody has ever complained about it, let's just kill it (Pavel)" * tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block: io_uring: kill fasync io-wq: exclusively gate signal based exit on get_signal() return
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fixes from Dan Williams: "A fix for a regression added this cycle in the pmem driver, and for a long standing bug for failed NUMA node lookups on ARM64. This has appeared in -next for several days with no reported issues. Summary: - Fix a regression that caused the sysfs ABI for pmem block devices to not be registered. This fails the nvdimm unit tests and dax xfstests. - Fix numa node lookups for dax-kmem memory (device-dax memory assigned to the page allocator) on ARM64" * tag 'libnvdimm-fixes-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm/pmem: fix creating the dax group ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect
-
Dave Wysochanski authored
In cachefiles_mark_object_buried, the dentry in question may not have an owner, and thus our cachefiles_object pointer may be NULL when calling the tracepoint, in which case we will also not have a valid debug_id to print in the tracepoint. Check for NULL object in the tracepoint and if so, just set debug_id to MAX_UINT as was done in 2908f5e1 ("fscache: Add a cookie debug ID and use that in traces"). This fixes the following oops: FS-Cache: Cache "mycache" added (type cachefiles) CacheFiles: File cache on vdc registered ... Workqueue: fscache_object fscache_object_work_func [fscache] RIP: 0010:trace_event_raw_event_cachefiles_mark_buried+0x4e/0xa0 [cachefiles] .... Call Trace: cachefiles_mark_object_buried+0xa5/0xb0 [cachefiles] cachefiles_bury_object+0x270/0x430 [cachefiles] cachefiles_walk_to_object+0x195/0x9c0 [cachefiles] cachefiles_lookup_object+0x5a/0xc0 [cachefiles] fscache_look_up_object+0xd7/0x160 [fscache] fscache_object_work_func+0xb2/0x340 [fscache] process_one_work+0x1f1/0x390 worker_thread+0x53/0x3e0 kthread+0x127/0x150 Fixes: 2908f5e1 ("fscache: Add a cookie debug ID and use that in traces") Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-cachefs@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
5.15-rc1 crashes with blank screen when booting up on two ThinkPads using i915. Bisections converge convincingly, but arrive at different and suprising "culprits", none of them the actual culprit. netconsole (with init_netconsole() hacked to call i915_init() when logging has started, instead of by module_init()) tells the story: kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245! with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify(). I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that function needs to be 4-byte aligned. Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation") Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nadezda Lutovinova authored
If driver read tmp value sufficient for (tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignments] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Nadezda Lutovinova authored
If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multipline alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Nadezda Lutovinova authored
If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Link: https://lore.kernel.org/r/20210921155153.28098-1-lutovinova@ispras.ru [groeck: Dropped unnecessary continuation lines, fixed multi-line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-
Vadim Pasternak authored
Add missed attribute for reading POUT from page 1. It is supported by device, but has been missed in initial commit. Fixes: 2c6fcbb2 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20210927070740.2149290-1-vadimp@nvidia.comSigned-off-by: Guenter Roeck <linux@roeck-us.net>
-