- 22 Sep, 2022 38 commits
-
-
Horatiu Vultur authored
Inside the function lan8814_config_intr, there are double spaces when assigning the return value of phy_write to err. Suggested-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220921065444.637067-1-horatiu.vultur@microchip.comSigned-off-by:
-
Alexandru Tachici authored
MII_BUS_ID_SIZE is larger than MAX_PHYS_ITEM_ID_LEN so we use the former here to set the parent port id. Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Alexandru Tachici <alexandru.tachici@analog.com> Link: https://lore.kernel.org/r/20220922063049.10388-1-alexandru.tachici@analog.comSigned-off-by:
-
Paolo Abeni authored
Lorenzo Bianconi says: ==================== Add WED support for MT7986 chipset Similar to MT7622, introduce Wireless Ethernet Dispatch (WED) support for MT7986 chipset in order to offload to the hw packet engine traffic received from LAN/WAN device to WLAN nic (MT7915E). ==================== Link: https://lore.kernel.org/r/cover.1663668203.git.lorenzo@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lorenzo Bianconi authored
Introduce hw flow offload support for mt7986 chipset. PPE is not enabled yet in mt7986 since mt76 support is not available yet. Tested-by:
Daniel Golle <daniel@makrotopia.org> Co-developed-by:
Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by:
Sujuan Chen <sujuan.chen@mediatek.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Other than pcie bus, introduce support for axi bus to mtk wed driver. Axi bus is used to connect mt7986-wmac soc chip available on mt7986 device. Tested-by:
-
Lorenzo Bianconi authored
Introduce Wireless Etherne Dispatcher support on transmission side for mt7986 chipset Tested-by:
-
Lorenzo Bianconi authored
Introduce mtk_wed_configure_irq, mtk_wed_dma_enable and mtk_wed_dma_disable utility routines. This is a preliminary patch to introduce mt7986 wed support. Tested-by:
-
Lorenzo Bianconi authored
Introduce foe_entry_size to mtk_eth_soc data structure since mt7986 relies on a bigger mtk_foe_entry data structure. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 wed support. Tested-by:
-
Lorenzo Bianconi authored
mt7986 chipset support multiple packet engines for wlan <-> eth packet forwarding. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to introduce mt7986 hw packet engine. Tested-by:
-
Lorenzo Bianconi authored
Document the binding for the Wireless Ethernet Dispatch core on the MT7986 ethernet driver Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce wed0 and wed1 nodes in order to enable offloading forwarding between ethernet and wireless devices on the mt7986 chipset. Co-developed-by:
-
Paolo Abeni authored
Wen Gu says: ==================== Separate SMC parameter settings from TCP sysctls SMC shares some sysctls with TCP, but considering the difference between these two protocols, it may not be very suitable for SMC to reuse TCP parameter settings in some cases, such as keepalive time or buffer size. So this patch set aims to introduce some SMC specific sysctls to independently and flexibly set the parameters that suit SMC. ==================== Link: https://lore.kernel.org/r/1663667542-119851-1-git-send-email-guwen@linux.alibaba.comSigned-off-by:
-
Tony Lu authored
Currently, SMC uses smc->sk.sk_{rcv|snd}buf to create buffers for send buffer and RMB. And the values of buffer size are from tcp_{w|r}mem in clcsock. The buffer size from TCP socket doesn't fit SMC well. Generally, buffers are usually larger than TCP for SMC-R/-D to get higher performance, for they are different underlay devices and paths. So this patch unbinds buffer size from TCP, and introduces two sysctl knobs to tune them independently. Also, these knobs are per net namespace and work for containers. Signed-off-by:Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
Wen Gu authored
SMC-R tests the viability of link by sending out TEST_LINK LLC messages over RoCE fabric when connections on link have been idle for a time longer than keepalive interval (testlink time). But using tcp_keepalive_time as testlink time maybe not quite suitable because it is default no less than two hours[1], which is too long for single link to find peer dead. The active host will still use peer-dead link (QP) sending messages, and can't find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally. So this patch introduces a independent sysctl for SMC-R to set link keepalive time, in order to detect link down in time. The default value is 30 seconds. [1] https://www.rfc-editor.org/rfc/rfc1122#page-101Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Sun Ke authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: fef29982 ("net: altera: tse: convert to phylink") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sun Ke <sunke32@huawei.com> Link: https://lore.kernel.org/r/20220920020041.2685948-1-sunke32@huawei.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Florian Westphal says: ==================== netfilter patches for net-next Remove GPL license copypastry in uapi files, those have SPDX tags. From Christophe Jaillet. Remove unused variable in rpfilter, from Guillaume Nault. Rework gc resched delay computation in conntrack, from Antoine Tenart. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: rpfilter: Remove unused variable 'ret'. headers: Remove some left-over license text in include/uapi/linux/netfilter/ netfilter: conntrack: revisit the gc initial rescheduling bias netfilter: conntrack: fix the gc rescheduling delay ==================== Link: https://lore.kernel.org/r/20220921095000.29569-1-fw@strlen.deSigned-off-by:
-
Uwe Kleine-König authored
Usually it's not necessary to declare static functions if the symbols are in the right order. Moving the definition of tsi_eth_driver down in the compilation unit allows to drop two such declarations. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220919131515.885361-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Qingqing Yang authored
We've met the problem that when there is a vlan tag inside GRE encapsulation, the match of num_of_vlans fails. It is caused by the vlan tag inside GRE payload has been counted into num_of_vlans, which is not expected. One example packet is like this: Ethernet II, Src: Broadcom_68:56:07 (00:10:18:68:56:07) Dst: Broadcom_68:56:08 (00:10:18:68:56:08) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 100 Internet Protocol Version 4, Src: 192.168.1.4, Dst: 192.168.1.200 Generic Routing Encapsulation (Transparent Ethernet bridging) Ethernet II, Src: Broadcom_68:58:07 (00:10:18:68:58:07) Dst: Broadcom_68:58:08 (00:10:18:68:58:08) 802.1Q Virtual LAN, PRI: 0, DEI: 0, ID: 200 ... It should match the (num_of_vlans 1) rule, but it matches the (num_of_vlans 2) rule. The vlan tags inside the GRE or other tunnel encapsulated payload should not be taken into num_of_vlans. The fix is to stop counting the vlan number when the encapsulation bit is set. Fixes: 34951fcf ("flow_dissector: Add number of vlan tags dissector") Signed-off-by:Qingqing Yang <qingqing.yang@broadcom.com> Reviewed-by:
Boris Sukholitko <boris.sukholitko@broadcom.com> Link: https://lore.kernel.org/r/20220919074808.136640-1-qingqing.yang@broadcom.comSigned-off-by:
-
Jamal Hadi Salim authored
Added by: commit e5cf1baf ("act_mirred: use TC_ACT_REINSERT when possible") but no longer useful. Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20220919130627.3551233-1-jhs@mojatatu.comSigned-off-by:
-
Jakub Kicinski authored
Colin Foster says: ==================== clean up ocelot_reset() routine ocelot_reset() will soon be exported to a common library to be used by the ocelot_ext system. This will make error values from regmap calls possible, so they must be checked. Additionally, readx_poll_timeout() can be substituted for the custom loop, as a simple cleanup. I don't have hardware to verify this set directly, but there shouldn't be any functional changes. ==================== Link: https://lore.kernel.org/r/20220917175127.161504-1-colin.foster@in-advantage.comSigned-off-by:
-
Colin Foster authored
The ocelot_reset() function utilizes regmap_field_write() but wasn't checking return values. While this won't cause issues for the current MMIO regmaps, it could be an issue for externally controlled interfaces. Add checks for these return values. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Signed-off-by:
-
Colin Foster authored
Clean up the reset code by utilizing readx_poll_timeout instead of a custom loop. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Jakub Kicinski authored
Haoyue Xu says: ==================== net: ll_temac: Cleanup for clearing static warnings Most static warnings are detected by Checkpatch.pl, mainly about: (1) #1: About the comments. (2) #2: About function name in a string. (3) #3: About the open parenthesis. (4) #4: About the else branch. (6) #6: About trailing statements. (7) #5,#7: About blank lines and spaces. ==================== Link: https://lore.kernel.org/r/20220917103843.526877-1-xuhaoyue1@hisilicon.comSigned-off-by:
-
huangjunxian authored
Cleaning some static warnings of indent. Signed-off-by:
huangjunxian <huangjunxian6@hisilicon.com> Signed-off-by:
Haoyue Xu <xuhaoyue1@hisilicon.com> Reviewed-by:
Harini Katakam <harini.katakam@amd.com> Signed-off-by:
-
huangjunxian authored
Cleaning some static warnings of trailing statements. Signed-off-by:
-
huangjunxian authored
Cleaning some static warnings of missing spaces around '='. Signed-off-by:
-
huangjunxian authored
Cleaning some static warnings of unnecessary else branch. Signed-off-by:
-
huangjunxian authored
Cleaning some static warnings of open parenthesis. Signed-off-by:
-
Haoyue Xu authored
As Checkpatch.pl warns, prefer using '"%s...", __func__' to using 'temac_device_reset', this function's name, in a string. Signed-off-by:
-
huangjunxian authored
Cleaning some static warnings of block comments. Signed-off-by:
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by:
Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917083535.20040-1-xiujianfeng@huawei.comSigned-off-by:
-
Xiu Jianfeng authored
Add missing __init/__exit annotations to module init/exit funcs. Signed-off-by:
-
William Dean authored
such expression: if (err) return err; return 0; can simplify to: return err; Signed-off-by:
William Dean <williamsukatube@163.com> Link: https://lore.kernel.org/r/20220917063556.2673-1-williamsukatube@163.comSigned-off-by:
-
Jian Shen authored
The inptu parameter 'features' is unused now. so remove it. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/20220917020451.63417-1-huangguangbin2@huawei.comSigned-off-by:
-
Uwe Kleine-König authored
Quite a few of the functions and other symbols defined in this driver had forward declarations. They can all be dropped after reordering them. This saves a few lines of code and reduces code duplication. Signed-off-by:
-
- 21 Sep, 2022 2 commits
-
-
Jakub Kicinski authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. ==================== Link: https://lore.kernel.org/r/20220916023803.23756-1-huangguangbin2@huawei.comSigned-off-by:
-
Guangbin Huang authored
Currently, driver will always clear user defined field of flow director in uninit process and sync flow director table in periodic task. However, if hardware does not support flow director driver should not do those processes, so add fd ability judgement. The fd ability judgement in function hclge_clear_fd_rules_in_list() is redundant, so delete it. Signed-off-by:
-
