- 08 Apr, 2017 12 commits
-
-
Alexander Duyck authored
This patch is meant to improve the performance of the Rx path. Specifically by using build_skb we have several distinct advantages. In the case of small frames we were previously using a copy-break approach. This means that we were allocating a page fragment to use for skb->head, and were having to copy the packet into that region. Both of those calls are now avoided since we just build the skb around the data. In the case of large frames the gains are much more significant. Specifically we were having to allocate skb->head, and copy the headers as before. However in addition we were having to parse the header using eth_get_headlen which could be quite expensive. All of this is avoided by building the frame around the data. I have seen gains as high as 30% when using VXLAN for instance due to just header pulling overhead. Finally with all this in place it also sets us up to start looking at enabling XDP. Specifically we now have a path in which the data is in the page and the frame is built around it. So if we parse it with XDP before we call build_skb we can take care of any necessary processing there. Change-ID: Id4bdd618e94473d41f892417e5d8019639e421e3 Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This patch adds padding to the start of frames to make room for headroom for us to eventually start using build_skb. Right now we guarantee at least NET_SKB_PAD + NET_IP_ALIGN, however we allocate more space if more is available. For example on x86 the headroom should be 192 bytes. On systems that have too large of a cache line size to support storing 1.5K padding and shared info we default to using 3K buffers and reserve everything that isn't used for skb_shared_info or the data buffer for headroom. Change-ID: I33c641c9a1ea10cf7cc484c2d20985368d2d709a Signed-off-by:
-
Alexander Duyck authored
There are situations where adding padding to the front and back of an Rx buffer will require that we add additional padding. Specifically if NET_IP_ALIGN is non-zero, or the MTU size is larger than 7.5K we would need to use 2K buffers which leaves us with no room for the padding. To preemptively address these cases I am adding support for 3K buffers to the Rx path so that we can provide the additional padding needed in the event of NET_IP_ALIGN being non-zero or a cache line being greater than 64. Change-ID: I938bc1ba611285428df39a613cd66f98e60b55c7 Signed-off-by:
-
Jacob Keller authored
Since an early commit a few flags have no longer been used. Remove these definitions to reduce code clutter. Change-ID: I3589be4622574e747013cd4dc403e18b039f4965 Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Alice Michael authored
The I40E_FLAG_NEED_LINK_UPDATE was never used. Remove the flag definitions. Change-ID: If59d0c6b4af85ca27281f3183c54b055adb439a4 Signed-off-by:
-
Jacob Keller authored
We can simply check both Tx and Rx queues in a single loop, rather than repeating the loop twice. Change-ID: Ic06f26b0e3c2620e0e33c1a2999edda488e647ad Signed-off-by:
-
Jacob Keller authored
Look up the MAC address from the eth_get_platform_mac_address() function first before checking what the firmware provides. We already handle the case of re-writing the MAC-VLAN filter, so there is no need to add extra code for this. However, update the comment where we do this to indicate that it does impact the Open Firmware MAC address case. Change-ID: I73e59fbe0b0e7e6f3ee9f5170d0bd3a4d5faf4db Signed-off-by:
-
Alan Brady authored
This patch greatly reduces the unneeded complexity in the i40e_detect_recover_hung_queue code path. The previous implementation set a 'hung bit' which would then get cleared while polling. If the detection routine was called a second time with the bit already set, we would issue a software interrupt. This patch makes it such that if interrupts are disabled and we have pending TX descriptors, we trigger a software interrupt since in, the worst case, queues are already clean and we have an extra interrupt. Additionally this patch removes the workaround for lost interrupts as calling napi_reschedule in this context can cause software interrupts to fire on the wrong CPU. Change-ID: Iae108582a3ceb6229ed1d22e4ed6e69cf97aad8d Signed-off-by:
Alan Brady <alan.brady@intel.com> Tested-by:
-
Maciej Sosin authored
Previously rtnl lock was held during whole reset procedure that was stopping other PFs running their reset procedures. In the result reset was not handled properly and host reset was the only way to recover. Change-ID: I23c0771c0303caaa7bd64badbf0c667e25142954 Signed-off-by:
Maciej Sosin <maciej.sosin@intel.com> Tested-by:
-
Alexander Duyck authored
This is a minor cleanup so that we are always updating pf->flags when we make a change to the private flags instead of updating a mix of either pf->flags and/or pf->hw_disabled_flags. In addition I went through and cleaned out all the spots where we were using the X722 define in regards to this flag. Lastly since we changed the logic I went through and flushed out any redundancy and cleaned up the handling of the flags in the Tx path. Change-ID: I79ff95a7272bb2533251ff11ef91e89ccb80b610 Signed-off-by:
-
Jacob Keller authored
Re-word the error message displayed when adding a filter with an invalid flow type. Additionally, report a distinct error message when the IPv4 protocol is at fault. Change-ID: Iba3d85b87f8d383c97c8bdd180df34a6adf3ee67 Signed-off-by:
-
Mitch Williams authored
The client interface is only intended for use on devices that support iWarp. Only register with the client if this is the case. This fixes a panic when loading i40iw on X710 devices. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Reported-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
- 07 Apr, 2017 28 commits
-
-
Thanneeru Srinivasulu authored
Adding support for TSO and checksum hardware offloads for ipv6. Signed-off-by:
Thanneeru Srinivasulu <tsrinivasulu@cavium.com> Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sean Wang says: ==================== net-next: dsa: add Mediatek MT7530 support MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. The patch series integrated Mediatek MT7530 into DSA support which includes the most of the essential callbacks such as tag insertion for port distinguishing, port control, bridge offloading, STP setup and ethtool operations to allow DSA to model each user port into independently standalone netdevice as the other DSA driver had done. Changes since v1: - rebased into 4.11-rc1 - refined binding document including below five items - changed the type of mediatek,mcm into bool - used reset controller binding for MCM reset and removed "mediatek,ethsys" property from binding - reused CPU port's ethernet Phandle instead of creating new one and removed "mediatek,ethernet" property from binding - aligned naming for GPIO reset with dsa/marvell.txt - added phy-mode as required property child nodes within ports container - handled gpio reset with devm_gpiod_* API - refined comment words - removed condition for CDM setting since the setup looks both fine for all cases - allowed of_find_net_device_by_node() working with pointing the device node into real netdev instance - fixed Kbuild warnings Changes since v2: - reuse readx_poll_timeout() to poll - add proper macro instead of hard coding - treat inconsistent cpu port as warning - remove the usage for regmap-debugfs - show error message when invalid id is found - put the logic for the setup of trgmii into adjut_link() - refine and reuse logic between port_[disable,enable], and default port setup - correct typo Changes since v3: - used struct as the parameter for readx_poll_timeout() and kill extra lpriv defined - moved around function to get out of an additional declaration - fixed kbuild errors caused by missing proper include in the latest tree ==================== Signed-off-by: -
Sean Wang authored
MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N platform which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC through either the TRGMII or RGMII which could be controlled by phy-mode in the dt-bindings to specify which mode is preferred to use. And for port 5, only RGMII can be specified. However, currently, only port 6 is being supported in this DSA driver. The driver is made with the reference to qca8k and other existing DSA driver. The most of the essential callbacks of the DSA are already support in the driver, including tag insert for user port distinguishing, port control, bridge offloading, STP setup and ethtool operation to allow DSA to model each user port into a standalone netdevice as the other DSA driver had done. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Landen Chao <Landen.Chao@mediatek.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Sean Wang authored
the patch adds the setup of the corresponding device node of GMAC into the netdev instance which could allow other modules such as DSA to find the instance through the node in dt-bindings using of_find_net_device_by_node() call. Signed-off-by:
-
Sean Wang authored
The patch adds the setup for allowing CDM can recognize these packets with carrying port-distinguishing tag. Otherwise, these tagging packets will be handled incorrectly by CDM. The setup is also working out for general untag packets as well. Signed-off-by:
-
Sean Wang authored
Add the support for the 4-bytes tag for DSA port distinguishing inserted allowing receiving and transmitting the packet via the particular port. The tag is being added after the source MAC address in the ethernet header. Signed-off-by:
-
Sean Wang authored
Add device-tree binding for Mediatek MT7530 switch. Cc: devicetree@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Florian Larysch authored
inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, fib_multipath_hash ends up being called with that skb. However, as that skb contains no information beyond the protocol type, the calculated hash does not match the one we would see for a real packet. There is currently no way to fix this for layer 4 hashing, as RTM_GETROUTE doesn't have the necessary information to create layer 4 headers. To fix this for layer 3 hashing, set appropriate saddr/daddrs in the skb and also change the protocol to UDP to avoid special treatment for ICMP. Signed-off-by:
Florian Larysch <fl@n621.de> Signed-off-by:
-
David S. Miller authored
Joao Pinto says: ==================== net: stmmac: adding multiple buffers This patch adds multiple buffers to stmmac in a more fragmented way, in order to make problem debug easier. I would kindly request to people to test this patch in their HWs in order to check if everything's functional. Thank you. ==================== Tested-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
-
Joao Pinto authored
This patch adds the napi variable to the stmmac_rx_queue structure and forces that operations like netif_queue_stopped, netif_wake_queue, netif_stop_queue, netdev_reset_queue and netdev_sent_queue be made by queue. Signed-off-by:
Joao Pinto <jpinto@synopsys.com> Tested-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
Joao Pinto authored
This patch adds the structure stmmac_tx_queue which contains tx queues specific data (previously in stmmac_priv). Signed-off-by:
-
Joao Pinto authored
This patch adds the structure stmmac_rx_queue which contains rx queues specific data (previously in stmmac_priv). Signed-off-by:
-
Joao Pinto authored
This patch breaks several functions into RX and TX scopes, which will be useful when adding multiple buffers mechanism. Signed-off-by:
-
David S. Miller authored
Tobias Klauser says: ==================== Use net_device_stats from struct net_device Along the lines of previous patches, switch (almost) all remaining net drivers to use net_device_stats from net_device instead of including a copy of it in their netdev_priv struct. ==================== Signed-off-by: -
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct pegasus, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: Petko Manolov <petkan@nucleusys.com> Cc: linux-usb@vger.kernel.org Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct kaweth_device, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Cc: linux-usb@vger.kernel.org Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct typhoon, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct de_private, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct happy_meal, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct bigmac, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct w90p910_ether, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct _mace_private, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct moxart_mac_priv_t, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct macb, use stats from struct net_device. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct emac_instance, use stats from struct net_device. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct netdev_private, use stats from struct net_device. Also remove the now unnecessary .ndo_get_stats function and the #ifdef'ed increment of the collisions16 counter which doesn't exist in struct net_device_stats. Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Cc: Santosh Raspatur <santosh@chelsio.com> Signed-off-by:
-
Tobias Klauser authored
Instead of using a private copy of struct net_device_stats in struct port_info, use stats from struct net_device. Signed-off-by:
-
