- 01 Apr, 2020 40 commits
-
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 4ddf8ab8 upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes commit a2c60d42 ("Add files for new driver - part 16"). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.netSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 499c405b upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes: a2c60d42 ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 8099f58f upstream. Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else. Such a request was added by commit a4f55d8b ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports). The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed. Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably. The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened. One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does. (Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.) Reported-and-tested-by:
Paul Zimmerman <pauldzim@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann <heinzelmann.david@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.orgSigned-off-by:
-
Richard Dodd authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit b692056d upstream. Currently, the SourceControl will stay in power-down mode after resuming from suspend. This patch resets the device after suspend to power it up. Signed-off-by:
Richard Dodd <richard.o.dodd@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200212142220.36892-1-richard.o.dodd@gmail.comSigned-off-by:
-
EJ Hsu authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 3e99862c upstream. When a uas disk is plugged into an external hub, uas_probe() will be called by the hub thread to do the probe. It will first create a SCSI host and then do the scan for this host. During the scan, it will probe the LUN using SCSI INQUERY command which will be packed in the URB and submitted to uas disk. There might be a chance that this external hub with uas disk attached is unplugged during the scan. In this case, uas driver will fail to submit the URB (due to the NOTATTACHED state of uas device) and try to put this SCSI command back to request queue waiting for next chance to run. In normal case, this cycle will terminate when hub thread gets disconnection event and calls into uas_disconnect() accordingly. But in this case, uas_disconnect() will not be called because hub thread of external hub gets stuck waiting for the completion of this SCSI command. A deadlock happened. In this fix, uas will call scsi_scan_host() asynchronously to avoid the blocking of hub thread. Signed-off-by:
EJ Hsu <ejh@nvidia.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200130092506.102760-1-ejh@nvidia.comSigned-off-by:
-
Malcolm Priestley authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 93134df5 upstream. bb_pre_ed_rssi is an u8 rx_dm always returns negative signed values add minus operator to always yield positive. fixes issue where rx sensitivity is always set to maximum because the unsigned numbers were always greater then 100. Fixes: 63b9907f ("staging: vt6656: mac80211 conversion: create rx function.") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/aceac98c-6e69-3ce1-dfec-2bf27b980221@gmail.comSigned-off-by:
-
Suren Baghdasaryan authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 6d67b029 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Suren Baghdasaryan <surenb@google.com> Cc: stable <stable@vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4 Signed-off-by:
Todd Kjos <tkjos@google.com> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.comSigned-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 2e90ca68 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by:
Jordy Zomer <jordy@simplyhacker.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Firo Yang authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 0f905225 ] Recent months, our customer reported several kernel crashes all preceding with following message: NETDEV WATCHDOG: eth2 (enic): transmit queue 0 timed out Error message of one of those crashes: BUG: unable to handle kernel paging request at ffffffffa007e090 After analyzing severl vmcores, I found that most of crashes are caused by memory corruption. And all the corrupted memory areas are overwritten by data of network packets. Moreover, I also found that the tx queues were enabled over watchdog reset. After going through the source code, I found that in enic_stop(), the tx queues stopped by netif_tx_disable() could be woken up over a small time window between netif_tx_disable() and the napi_disable() by the following code path: napi_poll-> enic_poll_msix_wq-> vnic_cq_service-> enic_wq_service-> netif_wake_subqueue(enic->netdev, q_number)-> test_and_clear_bit(__QUEUE_STATE_DRV_XOFF, &txq->state) In turn, upper netowrk stack could queue skb to ENIC NIC though enic_hard_start_xmit(). And this might introduce some race condition. Our customer comfirmed that this kind of kernel crash doesn't occur over 90 days since they applied this patch. Signed-off-by:
Firo Yang <firo.yang@suse.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jaihind Yadav authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 030b995a ] In AVC update we don't call avc_node_kill() when avc_xperms_populate() fails, resulting in the avc->avc_cache.active_nodes counter having a false value. In last patch this changes was missed , so correcting it. Fixes: fa1aa143 ("selinux: extended permissions for ioctls") Signed-off-by:
Jaihind Yadav <jaihindyadav@codeaurora.org> Signed-off-by:
Ravi Kumar Siddojigari <rsiddoji@codeaurora.org> [PM: merge fuzz, minor description cleanup] Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Zhiqiang Liu authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit c8ab4225 ] In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Shubhrajyoti Datta authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 061d2c1d ] In case the start + cache size is more than the max int the start overflows. Prevent the same. Signed-off-by:
Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Zenghui Yu authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 10794522 ] It looks like an obvious mistake to use its_mapc_cmd descriptor when building the INVALL command block. It so far worked by luck because both its_mapc_cmd.col and its_invall_cmd.col sit at the same offset of the ITS command descriptor, but we should not rely on it. Fixes: cc2d3216 ("irqchip: GICv3: ITS command queue") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20191202071021.1251-1-yuzenghui@huawei.comSigned-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 7c02b005 ] In bset.h, macro bset_bkey_last() is defined as, bkey_idx((struct bkey *) (i)->d, (i)->keys) Parameter i can be variable type of data structure, the macro always works once the type of struct i has member 'd' and 'keys'. bset_bkey_last() is also used in macro csum_set() to calculate the checksum of a on-disk data structure. When csum_set() is used to calculate checksum of on-disk bcache super block, the parameter 'i' data type is struct cache_sb_disk. Inside struct cache_sb_disk (also in struct cache_sb) the member keys is __u16 type. But bkey_idx() expects unsigned int (a 32bit width), so there is problem when sending parameters via stack to call bkey_idx(). Sparse tool from Intel 0day kbuild system reports this incompatible problem. bkey_idx() is part of user space API, so the simplest fix is to cast the (i)->keys to unsigned int type in macro bset_bkey_last(). Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Yunfeng Ye authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit aacee544 ] The variable inode may be NULL in reiserfs_insert_item(), but there is no check before accessing the member of inode. Fix this by adding NULL pointer check before calling reiserfs_debug(). Link: http://lkml.kernel.org/r/79c5135d-ff25-1cc9-4e99-9f572b88cc00@huawei.comSigned-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Cc: zhengbin <zhengbin13@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 4e456fee ] Clang warns: ../lib/scatterlist.c:314:5: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] return -ENOMEM; ^ ../lib/scatterlist.c:311:4: note: previous statement is here if (prv) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Link: http://lkml.kernel.org/r/20191218033606.11942-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/830 Fixes: edce6820 ("scatterlist: prevent invalid free when alloc fails") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
wangyan authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 9f16ca48 ] I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(), handle->h_transaction may be NULL in this situation: ocfs2_file_write_iter ->__generic_file_write_iter ->generic_perform_write ->ocfs2_write_begin ->ocfs2_write_begin_nolock ->ocfs2_write_cluster_by_desc ->ocfs2_write_cluster ->ocfs2_mark_extent_written ->ocfs2_change_extent_flag ->ocfs2_split_extent ->ocfs2_try_to_merge_extent ->ocfs2_extend_rotate_transaction ->ocfs2_extend_trans ->jbd2_journal_restart ->jbd2__journal_restart // handle->h_transaction is NULL here ->handle->h_transaction = NULL; ->start_this_handle /* journal aborted due to storage network disconnection, return error */ ->return -EROFS; /* line 3806 in ocfs2_try_to_merge_extent (), it will ignore ret error. */ ->ret = 0; ->... ->ocfs2_write_end ->ocfs2_write_end_nolock ->ocfs2_update_inode_fsync_trans // NULL pointer dereference ->oi->i_sync_tid = handle->h_transaction->t_tid; The information of NULL pointer dereference as follows: JBD2: Detected IO errors while flushing file data on dm-11-45 Aborting journal on device dm-11-45. JBD2: Error -5 detected when updating journal superblock for dm-11-45. (dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30 (dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e74e1338 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Process dd (pid: 22081, stack limit = 0x00000000584f35a9) CPU: 3 PID: 22081 Comm: dd Kdump: loaded Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 pstate: 60400009 (nZCv daif +PAN -UAO) pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2] sp : ffff0000459fba70 x29: ffff0000459fba70 x28: 0000000000000000 x27: ffff807ccf7f1000 x26: 0000000000000001 x25: ffff807bdff57970 x24: ffff807caf1d4000 x23: ffff807cc79e9000 x22: 0000000000001000 x21: 000000006c6cd000 x20: ffff0000091d9000 x19: ffff807ccb239db0 x18: ffffffffffffffff x17: 000000000000000e x16: 0000000000000007 x15: ffff807c5e15bd78 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000228 x8 : 000000000000000c x7 : 0000000000000fff x6 : ffff807a308ed6b0 x5 : ffff7e01f10967c0 x4 : 0000000000000018 x3 : d0bc661572445600 x2 : 0000000000000000 x1 : 000000001b2e0200 x0 : 0000000000000000 Call trace: ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] ocfs2_write_end+0x4c/0x80 [ocfs2] generic_perform_write+0x108/0x1a8 __generic_file_write_iter+0x158/0x1c8 ocfs2_file_write_iter+0x668/0x950 [ocfs2] __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc To prevent NULL pointer dereference in this situation, we use is_handle_aborted() before using handle->h_transaction->t_tid. Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.comSigned-off-by:
Yan Wang <wangyan122@huawei.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Signed-off-by:
-
Daniel Vetter authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit ec3d6508 ] Per at least one tester this is enough magic to recover the regression introduced for some people (but not all) in commit b8e2b019 Author: Peter Rosin <peda@axentia.se> Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette which for radeon had the side-effect of refactoring out a seemingly redudant writing of the color palette. 10ms in a fairly slow modeset path feels like an acceptable form of duct-tape, so maybe worth a shot and see what sticks. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=198123Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Vasily Averin authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 6722b23e ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s Notice the printing of "# Available triggers:..." after the line. With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s It only prints the end of the file, and does not restart. Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Ben Skeggs authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 0e6176c6 ] The implementations for most channel types contains a map of methods to priv registers in order to provide debugging info when a disp exception has been raised. This info is missing from the implementation of PIO channels as they're rather simplistic already, however, if an exception is raised by one of them, we'd end up triggering a NULL-pointer deref. Not ideal... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206299Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit c2f9a4e4 ] The loop counter addr is a u16 where as the upper limit of the loop is an int. In the unlikely event that the il->cfg->eeprom_size is greater than 64K then we end up with an infinite loop since addr will wrap around an never reach upper loop limit. Fix this by making addr an int. Addresses-Coverity: ("Infinite loop") Fixes: be663ab6 ("iwlwifi: split the drivers for agn and legacy devices 3945/4965") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit b61156fb ] Clang warns: ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2511:3: warning: misleading indentation; statement is not part of the previous 'if' [-Wmisleading-indentation] if (sta->tx_supp_rates & WLAN_RATE_5M5) ^ ../drivers/net/wireless/intersil/hostap/hostap_ap.c:2509:2: note: previous statement is here if (sta->tx_supp_rates & WLAN_RATE_2M) ^ 1 warning generated. This warning occurs because there is a space before the tab on this line. Remove it so that the indentation is consistent with the Linux kernel coding style and clang no longer warns. Fixes: ff1d2767 ("Add HostAP wireless driver.") Link: https://github.com/ClangBuiltLinux/linux/issues/813Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Vincenzo Frascino authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 76950f71 ] To perform the reserve_crashkernel() operation kexec uses SECTION_SIZE to find a memblock in a range. SECTION_SIZE is not defined for nommu systems. Trying to compile kexec in these conditions results in a build error: linux/arch/arm/kernel/setup.c: In function ‘reserve_crashkernel’: linux/arch/arm/kernel/setup.c:1016:25: error: ‘SECTION_SIZE’ undeclared (first use in this function); did you mean ‘SECTIONS_WIDTH’? crash_size, SECTION_SIZE); ^~~~~~~~~~~~ SECTIONS_WIDTH linux/arch/arm/kernel/setup.c:1016:25: note: each undeclared identifier is reported only once for each function it appears in linux/scripts/Makefile.build:265: recipe for target 'arch/arm/kernel/setup.o' failed Make KEXEC depend on MMU to fix the compilation issue. Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit d0a186e0 ] We invoke jbd2_journal_abort() to abort the journal and record errno in the jbd2 superblock when committing journal transaction besides the failure on submitting the commit record. But there is no need for the case and we can also invoke jbd2_journal_abort() instead of __jbd2_journal_abort_hard(). Fixes: 818d276c ("ext4: Add the journal checksum feature") Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Reviewed-by:
Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-2-yi.zhang@huawei.comSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Peter Große authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit ef7d84ca ] Lenovo Thinkpad T420s uses the same codec as T420, so apply the same quirk to enable audio output on a docking station. Signed-off-by:
Peter Große <pegro@friiks.de> Link: https://lore.kernel.org/r/20200122180106.9351-1-pegro@friiks.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vasily Gorbik authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 45f7a0da ] Currently backtrace from ftraced function does not contain ftraced function itself. e.g. for "path_openat": arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Ftraced function is expected in the backtrace by ftrace kselftests, which are now failing. It would also be nice to have it for clarity reasons. "ftrace_caller" itself is called without stack frame allocated for it and does not store its caller (ftraced function). Instead it simply allocates a stack frame for "ftrace_trace_function" and sets backchain to point to ftraced function stack frame (which contains ftraced function caller in saved r14). To fix this issue make "ftrace_caller" allocate a stack frame for itself just to store ftraced function for the stack unwinder. As a result backtrace looks like the following: arch_stack_walk+0x15c/0x2d8 stack_trace_save+0x50/0x68 stack_trace_call+0x15e/0x3d8 ftrace_graph_caller+0x0/0x1c <-- ftrace code path_openat+0x6/0xd60 <-- ftraced function do_filp_open+0x7c/0xe8 <-- ftraced function caller do_open_execat+0x76/0x1b8 open_exec+0x52/0x78 load_elf_binary+0x180/0x1160 search_binary_handler+0x8e/0x288 load_script+0x2a8/0x2b8 search_binary_handler+0x8e/0x288 __do_execve_file.isra.39+0x6fa/0xb40 __s390x_sys_execve+0x56/0x68 system_call+0xdc/0x2d8 Reported-by:
Sven Schnelle <sven.schnelle@ibm.com> Tested-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Brandon Maier authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit a8f40111 ] The remoteproc_core and remoteproc drivers all initialize with module_init(). However remoteproc drivers need the rproc_class during their probe. If one of the remoteproc drivers runs init and gets through probe before remoteproc_init() runs, a NULL pointer access of rproc_class's `glue_dirs` spinlock occurs. > Unable to handle kernel NULL pointer dereference at virtual address 000000dc > pgd = c0004000 > [000000dc] *pgd=00000000 > Internal error: Oops: 5 [#1] PREEMPT ARM > Modules linked in: > CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.14.106-rt56 #1 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > task: c6050000 task.stack: c604a000 > PC is at rt_spin_lock+0x40/0x6c > LR is at rt_spin_lock+0x28/0x6c > pc : [<c0523c90>] lr : [<c0523c78>] psr: 60000013 > sp : c604bdc0 ip : 00000000 fp : 00000000 > r10: 00000000 r9 : c61c7c10 r8 : c6269c20 > r7 : c0905888 r6 : c6269c20 r5 : 00000000 r4 : 000000d4 > r3 : 000000dc r2 : c6050000 r1 : 00000002 r0 : 000000d4 > Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none ... > [<c0523c90>] (rt_spin_lock) from [<c03b65a4>] (get_device_parent+0x54/0x17c) > [<c03b65a4>] (get_device_parent) from [<c03b6bec>] (device_add+0xe0/0x5b4) > [<c03b6bec>] (device_add) from [<c042adf4>] (rproc_add+0x18/0xd8) > [<c042adf4>] (rproc_add) from [<c01110e4>] (my_rproc_probe+0x158/0x204) > [<c01110e4>] (my_rproc_probe) from [<c03bb6b8>] (platform_drv_probe+0x34/0x70) > [<c03bb6b8>] (platform_drv_probe) from [<c03b9dd4>] (driver_probe_device+0x2c8/0x420) > [<c03b9dd4>] (driver_probe_device) from [<c03ba02c>] (__driver_attach+0x100/0x11c) > [<c03ba02c>] (__driver_attach) from [<c03b7d08>] (bus_for_each_dev+0x7c/0xc0) > [<c03b7d08>] (bus_for_each_dev) from [<c03b910c>] (bus_add_driver+0x1cc/0x264) > [<c03b910c>] (bus_add_driver) from [<c03ba714>] (driver_register+0x78/0xf8) > [<c03ba714>] (driver_register) from [<c010181c>] (do_one_initcall+0x100/0x190) > [<c010181c>] (do_one_initcall) from [<c0800de8>] (kernel_init_freeable+0x130/0x1d0) > [<c0800de8>] (kernel_init_freeable) from [<c051eee8>] (kernel_init+0x8/0x114) > [<c051eee8>] (kernel_init) from [<c01175b0>] (ret_from_fork+0x14/0x24) > Code: e2843008 e3c2203f f5d3f000 e5922010 (e193cf9f) > ---[ end trace 0000000000000002 ]--- Signed-off-by:
Brandon Maier <brandon.maier@rockwellcollins.com> Link: https://lore.kernel.org/r/20190530225223.136420-1-brandon.maier@rockwellcollins.comSigned-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit ce1f31b4 ] The "drive->dn" variable is a u8 controlled by root. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 117fcc30 ] The "drive->dn" value is a u8 and it is controlled by root only, but it could be out of bounds here so let's check. Signed-off-by:
-
Nick Black authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 54155ed4 ] A faulty userspace that calls destroy_session() before destroying the connections can trigger the failure. This patch prevents the issue by refusing to destroy the session if there are outstanding connections. ------------[ cut here ]------------ kernel BUG at mm/slub.c:306! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 1224 Comm: iscsid Not tainted 5.4.0-rc2.iscsi+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:__slab_free+0x181/0x350 [...] [ 1209.686056] RSP: 0018:ffffa93d4074fae0 EFLAGS: 00010246 [ 1209.686694] RAX: ffff934efa5ad800 RBX: 000000008010000a RCX: ffff934efa5ad800 [ 1209.687651] RDX: ffff934efa5ad800 RSI: ffffeb4041e96b00 RDI: ffff934efd402c40 [ 1209.688582] RBP: ffffa93d4074fb80 R08: 0000000000000001 R09: ffffffffbb5dfa26 [ 1209.689425] R10: ffff934efa5ad800 R11: 0000000000000001 R12: ffffeb4041e96b00 [ 1209.690285] R13: ffff934efa5ad800 R14: ffff934efd402c40 R15: 0000000000000000 [ 1209.691213] FS: 00007f7945dfb540(0000) GS:ffff934efda80000(0000) knlGS:0000000000000000 [ 1209.692316] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1209.693013] CR2: 000055877fd3da80 CR3: 0000000077384000 CR4: 00000000000006e0 [ 1209.693897] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1209.694773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1209.695631] Call Trace: [ 1209.695957] ? __wake_up_common_lock+0x8a/0xc0 [ 1209.696712] iscsi_pool_free+0x26/0x40 [ 1209.697263] iscsi_session_teardown+0x2f/0xf0 [ 1209.698117] iscsi_sw_tcp_session_destroy+0x45/0x60 [ 1209.698831] iscsi_if_rx+0xd88/0x14e0 [ 1209.699370] netlink_unicast+0x16f/0x200 [ 1209.699932] netlink_sendmsg+0x21a/0x3e0 [ 1209.700446] sock_sendmsg+0x4f/0x60 [ 1209.700902] ___sys_sendmsg+0x2ae/0x320 [ 1209.701451] ? cp_new_stat+0x150/0x180 [ 1209.701922] __sys_sendmsg+0x59/0xa0 [ 1209.702357] do_syscall_64+0x52/0x160 [ 1209.702812] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1209.703419] RIP: 0033:0x7f7946433914 [...] [ 1209.706084] RSP: 002b:00007fffb99f2378 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1209.706994] RAX: ffffffffffffffda RBX: 000055bc869eac20 RCX: 00007f7946433914 [ 1209.708082] RDX: 0000000000000000 RSI: 00007fffb99f2390 RDI: 0000000000000005 [ 1209.709120] RBP: 00007fffb99f2390 R08: 000055bc84fe9320 R09: 00007fffb99f1f07 [ 1209.710110] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000038 [ 1209.711085] R13: 000055bc8502306e R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace a2d933ede7f730d8 ]--- Link: https://lore.kernel.org/r/20191226203148.2172200-1-krisman@collabora.comSigned-off-by:
Nick Black <nlb@google.com> Co-developed-by:
Salman Qazi <sqazi@google.com> Signed-off-by:
Junho Ryu <jayr@google.com> Signed-off-by:
Khazhismel Kumykov <khazhy@google.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Will Deacon authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit d71e0171 ] If, for some bizarre reason, the compiler decided to split up the write of STE DWORD 0, we could end up making a partial structure valid. Although this probably won't happen, follow the example of the context-descriptor code and use WRITE_ONCE() to ensure atomicity of the write. Reported-by:
Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Navid Emamdoost authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 40efb09a ] In vmw_cmdbuf_res_add if drm_ht_insert_item fails the allocated memory for cres should be released. Fixes: 18e4a466 ("drm/vmwgfx: Fix compat shader namespace") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 1eb01347 ] Like other cases, it should use rcu protected 'chan' rather than 'fence->channel' in nouveau_fence_wait_uevent_handler. Fixes: 0ec5f02f ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Geert Uytterhoeven authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 7c35e699 ] If a device already has devres items attached before probing, a warning backtrace is printed. However, this backtrace does not reveal the offending device, leaving the user uninformed. Furthermore, using WARN_ON() causes systems with panic-on-warn to reboot. Fix this by replacing the WARN_ON() by a dev_crit() message. Abort probing the device, to prevent doing more damage to the device's resources. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.beSigned-off-by:
-
Logan Gunthorpe authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 9db8dc6d ] Some PCI bridges implement BARs in addition to bridge windows. For example, here's a PLX switch: 04:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0, IRQ 30, NUMA node 0 Memory at 90a00000 (32-bit, non-prefetchable) [size=256K] Bus: primary=04, secondary=05, subordinate=0a, sec-latency=0 I/O behind bridge: 00002000-00003fff Memory behind bridge: 90000000-909fffff Prefetchable memory behind bridge: 0000380000800000-0000380000bfffff Previously, when the kernel assigned resource addresses (with the pci=realloc command line parameter, for example) it could clear the struct resource corresponding to the BAR. When this happened, lspci would report this BAR as "ignored": Region 0: Memory at <ignored> (32-bit, non-prefetchable) [size=256K] This is because the kernel reports a zero start address and zero flags in the corresponding sysfs resource file and in /proc/bus/pci/devices. Investigation with 'lspci -x', however, shows the BIOS-assigned address will still be programmed in the device's BAR registers. It's clearly a bug that the kernel lost track of the BAR value, but in most cases, this still won't result in a visible issue because nothing uses the memory, so nothing is affected. However, when an IOMMU is in use, it will not reserve this space in the IOVA because the kernel no longer thinks the range is valid. (See dmar_init_reserved_ranges() for the Intel implementation of this.) Without the proper reserved range, a DMA mapping may allocate an IOVA that matches a bridge BAR, which results in DMA accesses going to the BAR instead of the intended RAM. The problem was in pci_assign_unassigned_root_bus_resources(). When any resource from a bridge device fails to get assigned, the code set the resource's flags to zero. This makes sense for bridge windows, as they will be re-enabled later, but for regular BARs, it makes the kernel permanently lose track of the fact that they decode address space. Change pci_assign_unassigned_root_bus_resources() and pci_assign_unassigned_bridge_resources() so they only clear "res->flags" for bridge *windows*, not bridge BARs. Fixes: da7822e5 ("PCI: update bridge resources to get more big ranges when allocating space (again)") Link: https://lore.kernel.org/r/20200108213208.4612-1-logang@deltatee.com [bhelgaas: commit log, check for pci_is_bridge()] Reported-by:
Kit Chow <kchow@gigaio.com> Signed-off-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Chen Zhou authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 8fea7802 ] If CONFIG_SND_ATMEL_SOC_DMA=m, build error: sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': (.text+0x7cd): undefined reference to `atmel_pcm_dma_platform_register' Function atmel_pcm_dma_platform_register is defined under CONFIG SND_ATMEL_SOC_DMA, so select SND_ATMEL_SOC_DMA in CONFIG SND_ATMEL_SOC_SSC, same to CONFIG_SND_ATMEL_SOC_PDC. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Link: https://lore.kernel.org/r/20200113133242.144550-1-chenzhou10@huawei.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 504c28c8 ] Change the driver to use portable integer types to avoid warnings during compile testing: drivers/net/wan/ixp4xx_hss.c:863:21: error: cast to 'u32 *' (aka 'unsigned int *') from smaller integer type 'int' [-Werror,-Wint-to-pointer-cast] memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4); ^ drivers/net/wan/ixp4xx_hss.c:979:12: error: incompatible pointer types passing 'u32 *' (aka 'unsigned int *') to parameter of type 'dma_addr_t *' (aka 'unsigned long long *') [-Werror,-Wincompatible-pointer-types] &port->desc_tab_phys))) ^~~~~~~~~~~~~~~~~~~~ include/linux/dmapool.h:27:20: note: passing argument to parameter 'handle' here dma_addr_t *handle); ^ Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Philipp Zabel authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit e112324c ] The EP0700MLP1 returns bogus data on the first register read access (reading the threshold parameter from register 0x00): edt_ft5x06 2-0038: crc error: 0xfc expected, got 0x40 It ignores writes until then. This patch adds a dummy read after which the number of sensors and parameter read/writes work correctly. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Paul E. McKenney authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 860c8802 ] Eric Dumazet supplied a KCSAN report of a bug that forces use of hlist_unhashed_lockless() from sk_unhashed(): ------------------------------------------------------------------------ BUG: KCSAN: data-race in inet_unhash / inet_unhash write to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 1: __hlist_nulls_del include/linux/list_nulls.h:88 [inline] hlist_nulls_del_init_rcu include/linux/rculist_nulls.h:36 [inline] __sk_nulls_del_node_init_rcu include/net/sock.h:676 [inline] inet_unhash+0x38f/0x4a0 net/ipv4/inet_hashtables.c:612 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 start_secondary+0x208/0x260 arch/x86/kernel/smpboot.c:264 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 read to 0xffff8880a69a0170 of 8 bytes by interrupt on cpu 0: sk_unhashed include/net/sock.h:607 [inline] inet_unhash+0x3d/0x4a0 net/ipv4/inet_hashtables.c:592 tcp_set_state+0xfa/0x3e0 net/ipv4/tcp.c:2249 tcp_done+0x93/0x1e0 net/ipv4/tcp.c:3854 tcp_write_err+0x7e/0xc0 net/ipv4/tcp_timer.c:56 tcp_retransmit_timer+0x9b8/0x16d0 net/ipv4/tcp_timer.c:479 tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:599 tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:619 call_timer_fn+0x5f/0x2f0 kernel/time/timer.c:1404 expire_timers kernel/time/timer.c:1449 [inline] __run_timers kernel/time/timer.c:1773 [inline] __run_timers kernel/time/timer.c:1740 [inline] run_timer_softirq+0xc0c/0xcd0 kernel/time/timer.c:1786 __do_softirq+0x115/0x33f kernel/softirq.c:292 invoke_softirq kernel/softirq.c:373 [inline] irq_exit+0xbb/0xe0 kernel/softirq.c:413 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0xe6/0x280 arch/x86/kernel/apic/apic.c:1137 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830 native_safe_halt+0xe/0x10 arch/x86/kernel/paravirt.c:71 arch_cpu_idle+0x1f/0x30 arch/x86/kernel/process.c:571 default_idle_call+0x1e/0x40 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x1af/0x280 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:355 rest_init+0xec/0xf6 init/main.c:452 arch_call_rest_init+0x17/0x37 start_kernel+0x838/0x85e init/main.c:786 x86_64_start_reservations+0x29/0x2b arch/x86/kernel/head64.c:490 x86_64_start_kernel+0x72/0x76 arch/x86/kernel/head64.c:471 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ------------------------------------------------------------------------ This commit therefore replaces C-language assignments with WRITE_ONCE() in include/linux/list_nulls.h and include/linux/rculist_nulls.h. Reported-by: Eric Dumazet <edumazet@google.com> # For KCSAN Signed-off-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 2d9ea193 ] Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree. Fixes: 297c4f3d ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM") Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
