- 16 Nov, 2016 3 commits
-
-
Michael Weiser authored
The stmmac driver does not take into account the processor may be big endian when writing the DMA descriptors. This causes the ethernet interface not to be initialised correctly when running a big-endian kernel. Change the descriptors for DMA to use __le32 and ensure they are suitably swapped before writing. Tested successfully on the Cubieboard2. Signed-off-by:
Michael Weiser <michael.weiser@gmx.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Westphal authored
draft-ietf-tcpm-dctcp-02 says: ... when the sender receives an indication of congestion (ECE), the sender SHOULD update cwnd as follows: cwnd = cwnd * (1 - DCTCP.Alpha / 2) So, lets do this and reduce cwnd more smoothly (and faster), as per current congestion estimate. Cc: Lawrence Brakmo <brakmo@fb.com> Cc: Andrew Shewmaker <agshew@gmail.com> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Fainelli authored
Introduced a typo making the driver no longer build, *sigh*. Fixes: 42469bf5 ("net: bcm63xx_enet: Utilize phy_ethtool_nway_reset") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
- 15 Nov, 2016 35 commits
-
-
Philippe Reynes authored
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by:Philippe Reynes <tremyfr@gmail.com> Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: phy: Centralize auto-negotation restart This patch series centralizes how ethtool::nway_reset is implemented by providing a PHYLIB function which calls into genphy_restart_aneg(). All drivers below are converted to use this new helper function. Some other have specific requirements that make them not quite suitable for a straight forward conversion. There is another patch series which implements ethtool::nway_reset using the helper function introduced that depends on this patch series. ==================== Signed-off-by: -
Florian Fainelli authored
Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
Thomas Langer <Thomas.langer@intel.com> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
Signed-off-by:
-
Florian Fainelli authored
This function just calls into genphy_restart_aneg() to perform an autonegotation restart. Signed-off-by:
-
David S. Miller authored
drivers/net/vxlan.c: In function ‘vxlan_xmit_one’: drivers/net/vxlan.c:2141:10: warning: ‘err’ may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by: -
David S. Miller authored
Pravin B Shelar says: ==================== vxlan: xmit improvements. Following patch series improves vxlan fast path, removes duplicate code and simplifies vxlan xmit code path. v2-v3: Removed unrelated warning fix from patch 2. rearranged error handling from patch 3 Fixed stats updates in vxlan route lookup in patch 4 v1-v2: Fix compilation error when IPv6 support is not enabled. ==================== Signed-off-by: -
pravin shelar authored
Signed-off-by:
Pravin B Shelar <pshelar@ovn.org> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
pravin shelar authored
Existing vxlan xmit function handles two distinct cases. 1. vxlan net device 2. vxlan lwt device. By seperating initialization these two cases the egress path looks better. Signed-off-by:
-
pravin shelar authored
Avoid code duplicate code for handling RTF_LOCAL routes. Signed-off-by:
-
pravin shelar authored
Move route sanity check to respective vxlan[4/6]_get_route functions. This allows us to perform all sanity checks before caching the dst so that we can avoid these checks on subsequent packets. This give move accurate metadata information for packet from fill_metadata_dst(). Signed-off-by:
-
pravin shelar authored
vxlan egress path error handling has became complicated, it need to handle IPv4 and IPv6 tunnel cases. Earlier patch removes vlan handling from vxlan_build_skb(), so vxlan_build_skb does not need to free skb and we can simplify the xmit path by having single error handling for both type of tunnels. Signed-off-by:
-
pravin shelar authored
Check the vxlan socket in vxlan6_getroute(). Signed-off-by:
-
pravin shelar authored
VxLan device does not have special handling for vlan taging on egress. Therefore it does not make sense to expose vlan offloading feature. This patch does not change vxlan functinality. Signed-off-by:
-
Paolo Abeni authored
The commit 850cbadd ("udp: use it's own memory accounting schema") assumes that the socket proto has memory accounting enabled, but this is not the case for UDPLITE. Fix it enabling memory accounting for UDPLITE and performing fwd allocated memory reclaiming on socket shutdown. UDP and UDPLITE share now the same memory accounting limits. Also drop the backlog receive operation, since is no more needed. Fixes: 850cbadd ("udp: use it's own memory accounting schema") Reported-by:
Andrei Vagin <avagin@gmail.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
David S. Miller authored
Martin KaFai Lau says: ==================== bpf: LRU map This patch set adds LRU map implementation to the existing BPF map family. The first few patches introduce the basic BPF LRU list implementation. The later patches introduce the LRU versions of the existing BPF_MAP_TYPE_LRU_[PERCPU_]HASH maps by leveraging the BPF LRU list. v2: - Added a percpu LRU list option which can be specified as a map attribute. [Note: percpu LRU list has nothing to do with the map's value] - Removed the cpu variable from the struct bpf_lru_locallist since it is not needed. - Changed the __bpf_lru_node_move_out to __bpf_lru_node_move_to_free in patch 1 to prepare the percpu LRU list in patch 2. - Moved the test_lru_map under selftests - Refactored a few things in the test codes ==================== Signed-off-by: -
Martin KaFai Lau authored
This patch has some unit tests and a test_lru_dist. The test_lru_dist reads in the numeric keys from a file. The files used here are generated by a modified fio-genzipf tool originated from the fio test suit. The sample data file can be found here: https://github.com/iamkafai/bpf-lru The zipf.* data files have 100k numeric keys and the key is also ranged from 1 to 100k. The test_lru_dist outputs the number of unique keys (nr_unique). F.e. The following means, 61239 of them is unique out of 100k keys. nr_misses means it cannot be found in the LRU map, so nr_misses must be >= nr_unique. test_lru_dist also simulates a perfect LRU map as a comparison: [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a1_01.out 4000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31603(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) .... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:23093(/100000) nr_misses:31710(/100000) task:0 Perfect LRU: nr_unique:23093(/100000 nr_misses:34328(/100000) [root@arch-fb-vm1 ~]# ~/devshare/fb-kernel/linux/samples/bpf/test_lru_dist \ /root/zipf.100k.a0_01.out 40000 1 ... test_parallel_lru_dist (map_type:9 map_flags:0x0): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67054(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) ... test_parallel_lru_dist (map_type:9 map_flags:0x2): task:0 BPF LRU: nr_unique:61239(/100000) nr_misses:67068(/100000) task:0 Perfect LRU: nr_unique:61239(/100000 nr_misses:66993(/100000) LRU map has also been added to map_perf_test: /* Global LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates /* Percpu LRU */ [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Martin KaFai Lau authored
Provide a LRU version of the existing BPF_MAP_TYPE_PERCPU_HASH Signed-off-by:
-
Martin KaFai Lau authored
Provide a LRU version of the existing BPF_MAP_TYPE_HASH. Signed-off-by:
-
Martin KaFai Lau authored
Refactor the codes that populate the value of a htab_elem in a BPF_MAP_TYPE_PERCPU_HASH typed bpf_map. Signed-off-by:
-
Martin KaFai Lau authored
Instead of having a common LRU list, this patch allows a percpu LRU list which can be selected by specifying a map attribute. The map attribute will be added in the later patch. While the common use case for LRU is #reads >> #updates, percpu LRU list allows bpf prog to absorb unusual #updates under pathological case (e.g. external traffic facing machine which could be under attack). Each percpu LRU is isolated from each other. The LRU nodes (including free nodes) cannot be moved across different LRU Lists. Here are the update performance comparison between common LRU list and percpu LRU list (the test code is at the last patch): [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 16 $i | awk '{r += $3}END{print r " updates"}'; done 1 cpus: 2934082 updates 4 cpus: 7391434 updates 8 cpus: 6500576 updates [root@kerneltest003.31.prn1 ~]# for i in 1 4 8; do echo -n "$i cpus: "; \ ./map_perf_test 32 $i | awk '{r += $3}END{printr " updates"}'; done 1 cpus: 2896553 updates 4 cpus: 9766395 updates 8 cpus: 17460553 updates Signed-off-by: -
Martin KaFai Lau authored
Introduce bpf_lru_list which will provide LRU capability to the bpf_htab in the later patch. * General Thoughts: 1. Target use case. Read is more often than update. (i.e. bpf_lookup_elem() is more often than bpf_update_elem()). If bpf_prog does a bpf_lookup_elem() first and then an in-place update, it still counts as a read operation to the LRU list concern. 2. It may be useful to think of it as a LRU cache 3. Optimize the read case 3.1 No lock in read case 3.2 The LRU maintenance is only done during bpf_update_elem() 4. If there is a percpu LRU list, it will lose the system-wise LRU property. A completely isolated percpu LRU list has the best performance but the memory utilization is not ideal considering the work load may be imbalance. 5. Hence, this patch starts the LRU implementation with a global LRU list with batched operations before accessing the global LRU list. As a LRU cache, #read >> #update/#insert operations, it will work well. 6. There is a local list (for each cpu) which is named 'struct bpf_lru_locallist'. This local list is not used to sort the LRU property. Instead, the local list is to batch enough operations before acquiring the lock of the global LRU list. More details on this later. 7. In the later patch, it allows a percpu LRU list by specifying a map-attribute for scalability reason and for use cases that need to prepare for the worst (and pathological) case like DoS attack. The percpu LRU list is completely isolated from each other and the LRU nodes (including free nodes) cannot be moved across the list. The following description is for the global LRU list but mostly applicable to the percpu LRU list also. * Global LRU List: 1. It has three sub-lists: active-list, inactive-list and free-list. 2. The two list idea, active and inactive, is borrowed from the page cache. 3. All nodes are pre-allocated and all sit at the free-list (of the global LRU list) at the beginning. The pre-allocation reasoning is similar to the existing BPF_MAP_TYPE_HASH. However, opting-out prealloc (BPF_F_NO_PREALLOC) is not supported in the LRU map. * Active/Inactive List (of the global LRU list): 1. The active list, as its name says it, maintains the active set of the nodes. We can think of it as the working set or more frequently accessed nodes. The access frequency is approximated by a ref-bit. The ref-bit is set during the bpf_lookup_elem(). 2. The inactive list, as its name also says it, maintains a less active set of nodes. They are the candidates to be removed from the bpf_htab when we are running out of free nodes. 3. The ordering of these two lists is acting as a rough clock. The tail of the inactive list is the older nodes and should be released first if the bpf_htab needs free element. * Rotating the Active/Inactive List (of the global LRU list): 1. It is the basic operation to maintain the LRU property of the global list. 2. The active list is only rotated when the inactive list is running low. This idea is similar to the current page cache. Inactive running low is currently defined as "# of inactive < # of active". 3. The active list rotation always starts from the tail. It moves node without ref-bit set to the head of the inactive list. It moves node with ref-bit set back to the head of the active list and then clears its ref-bit. 4. The inactive rotation is pretty simply. It walks the inactive list and moves the nodes back to the head of active list if its ref-bit is set. The ref-bit is cleared after moving to the active list. If the node does not have ref-bit set, it just leave it as it is because it is already in the inactive list. * Shrinking the Inactive List (of the global LRU list): 1. Shrinking is the operation to get free nodes when the bpf_htab is full. 2. It usually only shrinks the inactive list to get free nodes. 3. During shrinking, it will walk the inactive list from the tail, delete the nodes without ref-bit set from bpf_htab. 4. If no free node found after step (3), it will forcefully get one node from the tail of inactive or active list. Forcefully is in the sense that it ignores the ref-bit. * Local List: 1. Each CPU has a 'struct bpf_lru_locallist'. The purpose is to batch enough operations before acquiring the lock of the global LRU. 2. A local list has two sub-lists, free-list and pending-list. 3. During bpf_update_elem(), it will try to get from the free-list of (the current CPU local list). 4. If the local free-list is empty, it will acquire from the global LRU list. The global LRU list can either satisfy it by its global free-list or by shrinking the global inactive list. Since we have acquired the global LRU list lock, it will try to get at most LOCAL_FREE_TARGET elements to the local free list. 5. When a new element is added to the bpf_htab, it will first sit at the pending-list (of the local list) first. The pending-list will be flushed to the global LRU list when it needs to acquire free nodes from the global list next time. * Lock Consideration: The LRU list has a lock (lru_lock). Each bucket of htab has a lock (buck_lock). If both locks need to be acquired together, the lock order is always lru_lock -> buck_lock and this only happens in the bpf_lru_list.c logic. In hashtab.c, both locks are not acquired together (i.e. one lock is always released first before acquiring another lock). Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by:
-
- 14 Nov, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix off by one wrt. indexing when dumping /proc/net/route entries, from Alexander Duyck. 2) Fix lockdep splats in iwlwifi, from Johannes Berg. 3) Cure panic when inserting certain netfilter rules when NFT_SET_HASH is disabled, from Liping Zhang. 4) Memory leak when nft_expr_clone() fails, also from Liping Zhang. 5) Disable UFO when path will apply IPSEC tranformations, from Jakub Sitnicki. 6) Don't bogusly double cwnd in dctcp module, from Florian Westphal. 7) skb_checksum_help() should never actually use the value "0" for the resulting checksum, that has a special meaning, use CSUM_MANGLED_0 instead. From Eric Dumazet. 8) Per-tx/rx queue statistic strings are wrong in qed driver, fix from Yuval MIntz. 9) Fix SCTP reference counting of associations and transports in sctp_diag. From Xin Long. 10) When we hit ip6tunnel_xmit() we could have come from an ipv4 path in a previous layer or similar, so explicitly clear the ipv6 control block in the skb. From Eli Cooper. 11) Fix bogus sleeping inside of inet_wait_for_connect(), from WANG Cong. 12) Correct deivce ID of T6 adapter in cxgb4 driver, from Hariprasad Shenai. 13) Fix potential access past the end of the skb page frag array in tcp_sendmsg(). From Eric Dumazet. 14) 'skb' can legitimately be NULL in inet{,6}_exact_dif_match(). Fix from David Ahern. 15) Don't return an error in tcp_sendmsg() if we wronte any bytes successfully, from Eric Dumazet. 16) Extraneous unlocks in netlink_diag_dump(), we removed the locking but forgot to purge these unlock calls. From Eric Dumazet. 17) Fix memory leak in error path of __genl_register_family(). We leak the attrbuf, from WANG Cong. 18) cgroupstats netlink policy table is mis-sized, from WANG Cong. 19) Several XDP bug fixes in mlx5, from Saeed Mahameed. 20) Fix several device refcount leaks in network drivers, from Johan Hovold. 21) icmp6_send() should use skb dst device not skb->dev to determine L3 routing domain. From David Ahern. 22) ip_vs_genl_family sets maxattr incorrectly, from WANG Cong. 23) We leak new macvlan port in some cases of maclan_common_netlink() errors. Fix from Gao Feng. 24) Similar to the icmp6_send() fix, icmp_route_lookup() should determine L3 routing domain using skb_dst(skb)->dev not skb->dev. Also from David Ahern. 25) Several fixes for route offloading and FIB notification handling in mlxsw driver, from Jiri Pirko. 26) Properly cap __skb_flow_dissect()'s return value, from Eric Dumazet. 27) Fix long standing regression in ipv4 redirect handling, wrt. validating the new neighbour's reachability. From Stephen Suryaputra Lin. 28) If sk_filter() trims the packet excessively, handle it reasonably in tcp input instead of exploding. From Eric Dumazet. 29) Fix handling of napi hash state when copying channels in sfc driver, from Bert Kenward. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (121 commits) mlxsw: spectrum_router: Flush FIB tables during fini net: stmmac: Fix lack of link transition for fixed PHYs sctp: change sk state only when it has assocs in sctp_shutdown bnx2: Wait for in-flight DMA to complete at probe stage Revert "bnx2: Reset device during driver initialization" ps3_gelic: fix spelling mistake in debug message net: ethernet: ixp4xx_eth: fix spelling mistake in debug message ibmvnic: Fix size of debugfs name buffer ibmvnic: Unmap ibmvnic_statistics structure sfc: clear napi_hash state when copying channels mlxsw: spectrum_router: Correctly dump neighbour activity mlxsw: spectrum: Fix refcount bug on span entries bnxt_en: Fix VF virtual link state. bnxt_en: Fix ring arithmetic in bnxt_setup_tc(). Revert "include/uapi/linux/atm_zatm.h: include linux/time.h" tcp: take care of truncations done by sk_filter() ipv4: use new_gw for redirect neigh lookup r8152: Fix error path in open function net: bpqether.h: remove if_ether.h guard net: __skb_flow_dissect() must cap its return value ... -
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds authored
Pull arch/tile bugfix from Chris Metcalf: "This just fixes an incompatibility with tile __ro_after_init" * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: handle __ro_after_init like parisc does
-
