Pull io_uring fixes from Jens Axboe:
 "Here's a set of fixes that should go into 5.5-rc3 for io_uring.

  This is bigger than I'd like it to be, mainly because we're fixing the
  case where an application reuses sqe data right after issue. This
  really must work, or it's confusing. With 5.5 we're flagging us as
  submit stable for the actual data, this must also be the case for
  SQEs.

  Honestly, I'd really like to add another series on top of this, since
  it cleans it up considerable and prevents any SQE reuse by design. I
  posted that here:

    https://lore.kernel.org/io-uring/20191220174742.7449-1-axboe@kernel.dk/T/#u

  and may still send it your way early next week once it's been looked
  at and had some more soak time (does pass all regression tests). With
  that series, we've unified the prep+issue handling, and only the prep
  phase even has access to the SQE.

  Anyway, outside of that, fixes in here for a few other issues that
  have been hit in testing or production"

* tag 'io_uring-5.5-20191220' of git://git.kernel.dk/linux-block:
  io_uring: io_wq_submit_work() should not touch req->rw
  io_uring: don't wait when under-submitting
  io_uring: warn about unhandled opcode
  io_uring: read opcode and user_data from SQE exactly once
  io_uring: make IORING_OP_TIMEOUT_REMOVE deferrable
  io_uring: make IORING_OP_CANCEL_ASYNC deferrable
  io_uring: make IORING_POLL_ADD and IORING_POLL_REMOVE deferrable
  io_uring: make HARDLINK imply LINK
  io_uring: any deferred command must have stable sqe data
  io_uring: remove 'sqe' parameter to the OP helpers that take it
  io_uring: fix pre-prepped issue with force_nonblock == true
  io-wq: re-add io_wq_current_is_worker()
  io_uring: fix sporadic -EFAULT from IORING_OP_RECVMSG
  io_uring: fix stale comment and a few typos

Pull iommu fixes from Joerg Roedel:

 - Fix kmemleak warning in IOVA code

 - Fix compile warnings on ARM32/64 in dma-iommu code due to dma_mask
   type mismatches

 - Make ISA reserved regions relaxable, so that VFIO can assign devices
   which have such regions defined

 - Fix mapping errors resulting in IO page-faults in the VT-d driver

 - Make sure direct mappings for a domain are created after the default
   domain is updated

 - Map ISA reserved regions in the VT-d driver with correct permissions

 - Remove unneeded check for PSI capability in the IOTLB flush code of
   the VT-d driver

 - Lockdep fix iommu_dma_prepare_msi()

* tag 'iommu-fixes-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/dma: Relax locking in iommu_dma_prepare_msi()
  iommu/vt-d: Remove incorrect PSI capability check
  iommu/vt-d: Allocate reserved region for ISA with correct permission
  iommu: set group default domain before creating direct mappings
  iommu/vt-d: Fix dmar pte read access not set error
  iommu/vt-d: Set ISA bridge reserved region as relaxable
  iommu/dma: Rationalise types for DMA masks
  iommu/iova: Init the struct iova to fix the possible memleak

Pull x86 platform driver fixes from Andy Shevchenko:
 "Bucket of fixes for PDx86. Note, that there is no ABI breakage in
  Mellanox driver because it has been introduced in v5.5-rc1, so we can
  change it.

  Summary:

   - Add support of APUv4 and fix an assignment of simswap GPIO

   - Add Siemens CONNECT X300 to DMI table to avoid stuck during boot

   - Correct arguments of WMI call on HP Envy x360 15-cp0xxx model

   - Fix the mlx-bootctl sysfs attributes to be device related"

* tag 'platform-drivers-x86-v5.5-2' of git://git.infradead.org/linux-platform-drivers-x86:
  platform/x86: pcengines-apuv2: Spelling fixes in the driver
  platform/x86: pcengines-apuv2: detect apuv4 board
  platform/x86: pcengines-apuv2: fix simswap GPIO assignment
  platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table
  platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes
  platform/mellanox: fix the mlx-bootctl sysfs

Pull MMC host fixes from Ulf Hansson:

 - mtk-sd: Fix tuning for MT8173 HS200/HS400 mode

 - sdhci: Revert a fix for incorrect switch to HS mode

 - sdhci-msm: Fixup accesses to the DDR_CONFIG register

 - sdhci-of-esdhc: Revert a bad fix for erratum A-009204

 - sdhci-of-esdhc: Re-implement fix for erratum A-009204

 - sdhci-of-esdhc: Fixup P2020 errata handling

 - sdhci-pci: Disable broken CMDQ on Intel GLK based Lenovo systems

* tag 'mmc-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaround
  mmc: sdhci: Add a quirk for broken command queuing
  mmc: sdhci: Workaround broken command queuing on Intel GLK
  mmc: sdhci-of-esdhc: fix P2020 errata handling
  mmc: sdhci: Update the tuning failed messages to pr_debug level
  mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support"
  mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode
  mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register
  Revert "mmc: sdhci: Fix incorrect switch to HS mode"

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and other driver fixes for 5.5-rc3.

  The most noticable one is a much-reported fix for a random driver
  issue that came up from 5.5-rc1 compat_ioctl cleanups. The others are
  a chunk of habanalab driver fixes and intel_th driver fixes and new
  device ids.

  All have been in linux-next with no reported issues"

* tag 'char-misc-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  random: don't forget compat_ioctl on urandom
  intel_th: msu: Fix window switching without windows
  intel_th: Fix freeing IRQs
  intel_th: pci: Add Elkhart Lake SOC support
  intel_th: pci: Add Comet Lake PCH-V support
  habanalabs: remove variable 'val' set but not used
  habanalabs: rate limit error msg on waiting for CS

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for a number of reported
  issues.

  The majority here are some fixes for the wfx driver, but also in here
  is a comedi driver fix found during some code review, and an axis-fifo
  build dependancy issue to resolve some reported testing problems.

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: wfx: fix wrong error message
  staging: wfx: fix hif_set_mfp() with big endian hosts
  staging: wfx: detect race condition in WEP authentication
  staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1Mbps
  staging: wfx: fix rate control handling
  staging: wfx: firmware does not support more than 32 total retries
  staging: wfx: use boolean appropriately
  staging: wfx: fix counter overflow
  staging: wfx: fix case of lack of tx_retry_policies
  staging: wfx: fix the cache of rate policies on interface reset
  staging: axis-fifo: add unspecified HAS_IOMEM dependency
  staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 5.5-rc3.

  Only four small patches here:

   - atmel serial driver fix

   - msm_serial driver fix

   - sprd serial driver fix

   - tty core port fix

  The last tty core fix should resolve a long-standing bug with a race
  at port creation time that some people would see, and Sudip finally
  tracked down.

  All of these have been in linux-next with no reported issues"

* tag 'tty-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty/serial: atmel: fix out of range clock divider handling
  tty: link tty and port before configuring it as console
  serial: sprd: Add clearing break interrupt operation
  tty: serial: msm_serial: Fix lockup for sysrq and oops

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for some reported issues.

  Included in here are:

   - xhci build warning fix

   - ehci disconnect warning fix

   - usbip lockup fix and error cleanup fix

   - typec build fix

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: xhci: Fix build warning seen with CONFIG_PM=n
  usbip: Fix error path of vhci_recv_ret_submit()
  usbip: Fix receive error in vhci-hcd when using scatter-gather
  USB: EHCI: Do not return -EPIPE when hub is disconnected
  usb: typec: fusb302: Fix an undefined reference to 'extcon_get_state'

Pull pin control fixes from Linus Walleij:
 "Sorry that this fixes pull request took a while. Too much christmas
  business going on.

  This contains a few really important Intel fixes and some odd fixes:

   - A host of fixes for the Intel baytrail and cherryview: properly
     serialize all register accesses and add the irqchip with the
     gpiochip as we need to, fix some pin lists and initialize the
     hardware in the right order.

   - Fix the Aspeed G6 LPC configuration.

   - Handle a possible NULL pointer exception in the core.

   - Fix the Kconfig dependencies for the Equilibrium driver"

* tag 'pinctrl-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT config
  pinctrl: Modify Kconfig to fix linker error
  pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpio
  pinctrl: aspeed-g6: Fix LPC/eSPI mux configuration
  pinctrl: cherryview: Pass irqchip when adding gpiochip
  pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callback
  pinctrl: cherryview: Split out irq hw-init into a separate helper function
  pinctrl: baytrail: Pass irqchip when adding gpiochip
  pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Update North Community pin list
  pinctrl: baytrail: Really serialize all register accesses

Mainly does:
 - capitalize gpio and bios to GPIO and BIOS
 - capitalize beginning of comments
 - add periods in multi-line comments
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

GPIO stuff on APUv4 seems to be the same as on APUv2, so we just
need to match on DMI data.
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The mapping entry has to hold the GPIO line index instead of
controller's register number.

Fixes: 5037d4dd ("platform/x86: pcengines-apuv2: wire up simswitch gpio as led")
Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.

Fixes: 648e9218 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):

Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5

We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.

This commits bumps the buffer size, fixing the error.

Fixes: 8a1513b4 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This is a follow-up commit for the sysfs attributes to change
from DRIVER_ATTR to DEVICE_ATTR according to some initial comments.
In such case, it's better to point the sysfs path to the device
itself instead of the driver. The ABI document is also updated.

Fixes: 79e29cb8 ("platform/mellanox: Add bootctl driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Merge fixes from Andrew Morton:
 "6 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  lib/Kconfig.debug: fix some messed up configurations
  mm: vmscan: protect shrinker idr replace with CONFIG_MEMCG
  kasan: don't assume percpu shadow allocations will succeed
  kasan: use apply_to_existing_page_range() for releasing vmalloc shadow
  mm/memory.c: add apply_to_existing_page_range() helper
  kasan: fix crashes on access to memory mapped by vm_map_ram()

Pull power management fix from Rafael Wysocki:
 "Fix a problem related to CPU offline/online and cpufreq governors that
  in some system configurations may lead to a system-wide deadlock
  during CPU online"

* tag 'pm-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Avoid leaving stale IRQ work items during CPU offline

* pm-cpufreq:
  cpufreq: Avoid leaving stale IRQ work items during CPU offline

The erratum A-009204 workaround patch was reverted because of
incorrect implementation.

8b6dc6b2 mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add
        erratum A-009204 support"

This patch is to re-implement the workaround (add a 5 ms delay
before setting SYSCTL[RSTD] to make sure all the DMA transfers
are finished).
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com
Fixes: 5dd19552 ("mmc: sdhci-of-esdhc: add erratum A-009204 support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull tpm fixes from Jarkko Sakkinen:
 "Bunch of fixes for rc3"

* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm/tpm_ftpm_tee: add shutdown call back
  tpm: selftest: cleanup after unseal with wrong auth/policy test
  tpm: selftest: add test covering async mode
  tpm: fix invalid locking in NONBLOCKING mode
  security: keys: trusted: fix lost handle flush
  tpm_tis: reserve chip for duration of tpm_tis_core_init
  KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
  KEYS: remove CONFIG_KEYS_COMPAT

Add shutdown call back to close existing session with fTPM TA
to support kexec scenario.

Add parentheses to function names in comments as specified in kdoc.
Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

I've been chasing a weird and obscure crash that was userspace stack
corruption, and finally narrowed it down to a bit flip that made a
stack address invalid. io_wq_submit_work() unconditionally flips
the req->rw.ki_flags IOCB_NOWAIT bit, but since it's a generic work
handler, this isn't valid. Normal read/write operations own that
part of the request, on other types it could be something else.

Move the IOCB_NOWAIT clear to the read/write handlers where it belongs.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The following build warning is seen if CONFIG_PM is disabled.

drivers/usb/host/xhci-pci.c:498:13: warning:
	unused function 'xhci_pci_shutdown'

Fixes: f2c710f7 ("usb: xhci: only set D3hot for pci device")
Cc: Henry Lin <henryl@nvidia.com>
Cc: stable@vger.kernel.org	# all stable releases with f2c710f7Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no reliable way to submit and wait in a single syscall, as
io_submit_sqes() may under-consume sqes (in case of an early error).
Then it will wait for not-yet-submitted requests, deadlocking the user
in most cases.

Don't wait/poll if can't submit all sqes
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull sound fixes from Takashi Iwai:
 "A slightly high amount at this time, but all good and small fixes:

   - A PCM core fix that initializes the buffer properly for avoiding
     information leaks; it is a long-standing minor problem, but good to
     fix better now

   - A few ASoC core fixes for the init / cleanup ordering issues that
     surfaced after the recent refactoring

   - Lots of SOF and topology-related fixes went in, as usual as such
     hot topics

   - Several ASoC codec and platform-specific small fixes: wm89xx,
     realtek, and max98090, AMD, Intel-SST

   - A fix for the previous incomplete regression of HD-audio, now
     hitting Nvidia HDMI

   - A few HD-audio CA0132 codec fixes"

* tag 'sound-5.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
  ALSA: hda - Downgrade error message for single-cmd fallback
  ASoC: wm8962: fix lambda value
  ALSA: hda: Fix regression by strip mask fix
  ALSA: hda/ca0132 - Fix work handling in delayed HP detection
  ALSA: hda/ca0132 - Avoid endless loop
  ALSA: hda/ca0132 - Keep power on during processing DSP response
  ALSA: pcm: Avoid possible info leaks from PCM stream buffers
  ASoC: Intel: common: work-around incorrect ACPI HID for CML boards
  ASoC: SOF: Intel: split cht and byt debug window sizes
  ASoC: SOF: loader: fix snd_sof_fw_parse_ext_data
  ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header
  ASoC: simple-card: Don't create separate link when platform is present
  ASoC: topology: Check return value for soc_tplg_pcm_create()
  ASoC: topology: Check return value for snd_soc_add_dai_link()
  ASoC: core: only flush inited work during free
  ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89
  ASoC: core: Init pcm runtime work early to avoid warnings
  ASoC: Intel: sst: Add missing include <linux/io.h>
  ASoC: max98090: fix possible race conditions
  ASoC: max98090: exit workaround earlier if PLL is locked
  ...

Since commit ece6e6f0 ("iommu/dma-iommu: Split iommu_dma_map_msi_msg()
in two parts"), iommu_dma_prepare_msi() should no longer have to worry
about preempting itself, nor being called in atomic context at all. Thus
we can downgrade the IRQ-safe locking to a simple mutex to avoid angering
the new might_sleep() check in iommu_map().
Reported-by: Qian Cai <cai@lca.pw>
Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The PSI (Page Selective Invalidation) bit in the capability register
is only valid for second-level translation. Intel IOMMU supporting
scalable mode must support page/address selective IOTLB invalidation
for first-level translation. Remove the PSI capability check in SVA
cache invalidation code.

Fixes: 8744daf4 ("iommu/vt-d: Remove global page flush support")
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The driver checks that the number of retries made by the device is
coherent with the rate policy. However, this check make sense only if
the device has returned RETRY_EXCEEDED.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

struct hif_mib_protected_mgmt_policy is an array of u8. There is no
reason to swap its bytes.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Current code has a special case to handle association with WEP. Before
to rework the tx data handling, let's try to detect any possible misuse
of this code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-9-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When not using HT mode, minstrel always includes 1Mbps as fallback rate.
But, when using HT mode, this fallback is not included. Yet, it seems
that it could save some frames. So, this patch add it unconditionally.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-8-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A tx_retry_policy (the equivalent of a list of ieee80211_tx_rate in
hardware API) is not able to include a rate multiple time. So currently,
the driver merges the identical rates from the policy provided by
minstrel (and it try to do the best choice it can in the associated
flags) before to sent it to firmware.

Until now, when rates are merged, field "count" is set to
max(count1, count2). But, it means that the sum of retries for all rates
could be far less than initial number of retries. So, this patch changes
the value of field "count" to count1 + count2. Thus, sum of all retries
for all rates stay the same.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-7-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sum of all retries for a Tx frame cannot be superior to 32.

There are 4 rates at most. So this patch limits number of retries per
rate to 8.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-6-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The field 'uploaded' is used as a boolean, so call it a boolean.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-5-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some weird behaviors were observed when connection is really good and
packets are small. It appears that sometime, number of packets in queues
can exceed 255 and generate an overflow in field usage_count.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-4-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In some rare cases, driver may not have any available tx_retry_policies.
In this case, the driver asks to mac80211 to stop sending data. However,
it seems that a race is possible and a few frames can be sent to the
driver. In this case, driver can't wait for free tx_retry_policies since
wfx_tx() must be atomic. So, this patch fix this case by sending these
frames with the special policy number 15.

The firmware normally use policy 15 to send internal frames (PS-poll,
beacons, etc...). So, it is not a so bad fallback.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-3-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Device and driver maintain a cache of rate policies (aka.
tx_retry_policy in hardware API).

When hif_reset() is sent to hardware, device resets its cache of rate
policies. In order to keep driver in sync, it is necessary to do the
same on driver.

Note, when driver tries to use a rate policy that has not been defined
on device, data is sent at 1Mbps. So, this patch should fix abnormal
throughput observed sometime after a reset of the interface.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20191217161318.31402-2-Jerome.Pouiller@silabs.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Command queuing has been reported broken on some systems based on Intel
GLK. A separate patch disables command queuing in some cases.

This patch adds a quirk for broken command queuing, which enables users
with problems to disable command queuing using sdhci module parameters for
quirks.

Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Command queuing has been reported broken on some Lenovo systems based on
Intel GLK. This is likely a BIOS issue, so disable command queuing for
Intel GLK if the BIOS vendor string is "LENOVO".

Fixes: 8ee82bda ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Two previous patches introduced below quirks for P2020 platforms.
- SDHCI_QUIRK_RESET_AFTER_REQUEST
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL

The patches made a mistake to add them in quirks2 of sdhci_host
structure, while they were defined for quirks.
	host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
	host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

This patch is to fix them.
	host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST;
	host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;

Fixes: 05cb6b2a ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support")
Fixes: a46e4271 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support")
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>