- 30 May, 2014 16 commits
-
-
Alexander Graf authored
When we expose a POWER8 CPU into the guest, it will start accessing PMU SPRs that we don't emulate. Just ignore accesses to them. Signed-off-by:Alexander Graf <agraf@suse.de>
-
Alexander Graf authored
With the previous patches applied, we can now successfully use PR KVM on little endian hosts which means we can now allow users to select it. However, HV KVM still needs some work, so let's keep the kconfig conflict on that one. Signed-off-by: -
Alexander Graf authored
When the host CPU we're running on doesn't support dcbz32 itself, but the guest wants to have dcbz only clear 32 bytes of data, we loop through every executable mapped page to search for dcbz instructions and patch them with a special privileged instruction that we emulate as dcbz32. The only guests that want to see dcbz act as 32byte are book3s_32 guests, so we don't have to worry about little endian instruction ordering. So let's just always search for big endian dcbz instructions, also when we're on a little endian host. Signed-off-by: -
Alexander Graf authored
The shared (magic) page is a data structure that contains often used supervisor privileged SPRs accessible via memory to the user to reduce the number of exits we have to take to read/write them. When we actually share this structure with the guest we have to maintain it in guest endianness, because some of the patch tricks only work with native endian load/store operations. Since we only share the structure with either host or guest in little endian on book3s_64 pr mode, we don't have to worry about booke or book3s hv. For booke, the shared struct stays big endian. For book3s_64 hv we maintain the struct in host native endian, since it never gets shared with the guest. For book3s_64 pr we introduce a variable that tells us which endianness the shared struct is in and route every access to it through helper inline functions that evaluate this variable. Signed-off-by: -
Alexander Graf authored
We expose a blob of hypercall instructions to user space that it gives to the guest via device tree again. That blob should contain a stream of instructions necessary to do a hypercall in big endian, as it just gets passed into the guest and old guests use them straight away. Signed-off-by: -
Alexander Graf authored
When the guest does an RTAS hypercall it keeps all RTAS variables inside a big endian data structure. To make sure we don't have to bother about endianness inside the actual RTAS handlers, let's just convert the whole structure to host endian before we call our RTAS handlers and back to big endian when we return to the guest. Signed-off-by: -
Alexander Graf authored
The HTAB on PPC is always in big endian. When we access it via hypercalls on behalf of the guest and we're running on a little endian host, we need to make sure we swap the bits accordingly. Signed-off-by: -
Alexander Graf authored
The default MSR when user space does not define anything should be identical on little and big endian hosts, so remove MSR_LE from it. Signed-off-by: -
Alexander Graf authored
The "shadow SLB" in the PACA is shared with the hypervisor, so it has to be big endian. We access the shadow SLB during world switch, so let's make sure we access it in big endian even when we're on a little endian host. Signed-off-by: -
Alexander Graf authored
The HTAB is always big endian. We access the guest's HTAB using copy_from/to_user, but don't yet take care of the fact that we might be running on an LE host. Wrap all accesses to the guest HTAB with big endian accessors. Signed-off-by: -
Alexander Graf authored
The HTAB is always big endian. We access the guest's HTAB using copy_from/to_user, but don't yet take care of the fact that we might be running on an LE host. Wrap all accesses to the guest HTAB with big endian accessors. Signed-off-by: -
Alexander Graf authored
Commit 9308ab8e made C/R HTAB updates go byte-wise into the target HTAB. However, it didn't update the guest's copy of the HTAB, but instead the host local copy of it. Write to the guest's HTAB instead. Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Aneesh Kumar K.V authored
With debug option "sleep inside atomic section checking" enabled we get the below WARN_ON during a PR KVM boot. This is because upstream now have PREEMPT_COUNT enabled even if we have preempt disabled. Fix the warning by adding preempt_disable/enable around floating point and altivec enable. WARNING: at arch/powerpc/kernel/process.c:156 Modules linked in: kvm_pr kvm CPU: 1 PID: 3990 Comm: qemu-system-ppc Tainted: G W 3.15.0-rc1+ #4 task: c0000000eb85b3a0 ti: c0000000ec59c000 task.ti: c0000000ec59c000 NIP: c000000000015c84 LR: d000000003334644 CTR: c000000000015c00 REGS: c0000000ec59f140 TRAP: 0700 Tainted: G W (3.15.0-rc1+) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 42000024 XER: 20000000 CFAR: c000000000015c24 SOFTE: 1 GPR00: d000000003334644 c0000000ec59f3c0 c000000000e2fa40 c0000000e2f80000 GPR04: 0000000000000800 0000000000002000 0000000000000001 8000000000000000 GPR08: 0000000000000001 0000000000000001 0000000000002000 c000000000015c00 GPR12: d00000000333da18 c00000000fb80900 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 00003fffce4e0fa1 GPR20: 0000000000000010 0000000000000001 0000000000000002 00000000100b9a38 GPR24: 0000000000000002 0000000000000000 0000000000000000 0000000000000013 GPR28: 0000000000000000 c0000000eb85b3a0 0000000000002000 c0000000e2f80000 NIP [c000000000015c84] .enable_kernel_fp+0x84/0x90 LR [d000000003334644] .kvmppc_handle_ext+0x134/0x190 [kvm_pr] Call Trace: [c0000000ec59f3c0] [0000000000000010] 0x10 (unreliable) [c0000000ec59f430] [d000000003334644] .kvmppc_handle_ext+0x134/0x190 [kvm_pr] [c0000000ec59f4c0] [d00000000324b380] .kvmppc_set_msr+0x30/0x50 [kvm] [c0000000ec59f530] [d000000003337cac] .kvmppc_core_emulate_op_pr+0x16c/0x5e0 [kvm_pr] [c0000000ec59f5f0] [d00000000324a944] .kvmppc_emulate_instruction+0x284/0xa80 [kvm] [c0000000ec59f6c0] [d000000003336888] .kvmppc_handle_exit_pr+0x488/0xb70 [kvm_pr] [c0000000ec59f790] [d000000003338d34] kvm_start_lightweight+0xcc/0xdc [kvm_pr] [c0000000ec59f960] [d000000003336288] .kvmppc_vcpu_run_pr+0xc8/0x190 [kvm_pr] [c0000000ec59f9f0] [d00000000324c880] .kvmppc_vcpu_run+0x30/0x50 [kvm] [c0000000ec59fa60] [d000000003249e74] .kvm_arch_vcpu_ioctl_run+0x54/0x1b0 [kvm] [c0000000ec59faf0] [d000000003244948] .kvm_vcpu_ioctl+0x478/0x760 [kvm] [c0000000ec59fcb0] [c000000000224e34] .do_vfs_ioctl+0x4d4/0x790 [c0000000ec59fd90] [c000000000225148] .SyS_ioctl+0x58/0xb0 [c0000000ec59fe30] [c00000000000a1e4] syscall_exit+0x0/0x98 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Aneesh Kumar K.V authored
This patch make sure we inherit the LE bit correctly in different case so that we can run Little Endian distro in PR mode Signed-off-by:
-
Alexander Graf authored
The dcbtls instruction is able to lock data inside the L1 cache. We don't want to give the guest actual access to hardware cache locks, as that could influence other VMs on the same system. But we can tell the guest that its locking attempt failed. By implementing the instruction we at least don't give the guest a program exception which it definitely does not expect. Signed-off-by: -
Alexander Graf authored
The L1 instruction cache control register contains bits that indicate that we're still handling a request. Mask those out when we set the SPR so that a read doesn't assume we're still doing something. Signed-off-by:
-
- 22 May, 2014 6 commits
-
-
Nadav Amit authored
The DR7 masking which is done on task switch emulation should be in hex format (clearing the local breakpoints enable bits 0,2,4 and 6). Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Dave Hansen authored
I noticed on some of my systems that page fault tracing doesn't work: cd /sys/kernel/debug/tracing echo 1 > events/exceptions/enable cat trace; # nothing shows up I eventually traced it down to CONFIG_KVM_GUEST. At least in a KVM VM, enabling that option breaks page fault tracing, and disabling fixes it. I tried on some old kernels and this does not appear to be a regression: it never worked. There are two page-fault entry functions today. One when tracing is on and another when it is off. The KVM code calls do_page_fault() directly instead of calling the traced version: > dotraplinkage void __kprobes > do_async_page_fault(struct pt_regs *regs, unsigned long > error_code) > { > enum ctx_state prev_state; > > switch (kvm_read_and_reset_pf_reason()) { > default: > do_page_fault(regs, error_code); > break; > case KVM_PV_REASON_PAGE_NOT_PRESENT: I'm also having problems with the page fault tracing on bare metal (same symptom of no trace output). I'm unsure if it's related. Steven had an alternative to this which has zero overhead when tracing is off where this includes the standard noops even when tracing is disabled. I'm unconvinced that the extra complexity of his apporach: http://lkml.kernel.org/r/20140508194508.561ed220@gandalf.local.home is worth it, expecially considering that the KVM code is already making page fault entry slower here. This solution is dirt-simple. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Gleb Natapov <gleb@redhat.com> Cc: kvm@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:Dave Hansen <dave.hansen@linux.intel.com> Acked-by:
"H. Peter Anvin" <hpa@zytor.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Paolo Bonzini authored
CS.RPL is not equal to the CPL in the few instructions between setting CR0.PE and reloading CS. And CS.DPL is also not equal to the CPL for conforming code segments. However, SS.DPL *is* always equal to the CPL except for the weird case of SYSRET on AMD processors, which sets SS.DPL=SS.RPL from the value in the STAR MSR, but force CPL=3 (Intel instead forces SS.DPL=SS.RPL=CPL=3). So this patch: - modifies SVM to update the CPL from SS.DPL rather than CS.RPL; the above case with SYSRET is not broken further, and the way to fix it would be to pass the CPL to userspace and back - modifies VMX to always return the CPL from SS.DPL (except forcing it to 0 if we are emulating real mode via vm86 mode; in vm86 mode all DPLs have to be 3, but real mode does allow privileged instructions). It also removes the CPL cache, which becomes a duplicate of the SS access rights cache. This fixes doing KVM_IOCTL_SET_SREGS exactly after setting CR0.PE=1 but before CS has been reloaded. Signed-off-by: -
Paolo Bonzini authored
Table 7-1 of the SDM mentions a check that the code segment's DPL must match the selector's RPL. This was not done by KVM, fix it. Signed-off-by: -
Paolo Bonzini authored
Not needed anymore now that the CPL is computed directly during task switch. Signed-off-by: -
Paolo Bonzini authored
During task switch, all of CS.DPL, CS.RPL, SS.DPL must match (in addition to all the other requirements) and will be the new CPL. So far this worked by carefully setting the CS selector and flag before doing the task switch; setting CS.selector will already change the CPL. However, this will not work once we get the CPL from SS.DPL, because then you will have to set the full segment descriptor cache to change the CPL. ctxt->ops->cpl(ctxt) will then return the old CPL during the task switch, and the check that SS.DPL == CPL will fail. Temporarily assume that the CPL comes from CS.RPL during task switch to a protected-mode task. This is the same approach used in QEMU's emulation code, which (until version 2.0) manually tracks the CPL. Signed-off-by:
-
- 16 May, 2014 13 commits
-
-
Paolo Bonzini authored
Merge tag 'kvm-s390-20140516' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next 1. Correct locking for lazy storage key handling A test loop with multiple CPUs triggered a race in the lazy storage key handling as introduced by commit 934bc131 (KVM: s390: Allow skeys to be enabled for the current process). This race should not happen with Linux guests, but let's fix it anyway. Patch touches !/kvm/ code, but is from the s390 maintainer. 2. Better handling of broken guests If we detect a program check loop we stop the guest instead of wasting CPU cycles. 3. Better handling on MVPG emulation The move page handling is improved to be architecturally correct. 3. Trace point rework Let's rework the kvm trace points to have a common header file (for later perf usage) and provided a table based instruction decoder. 4. Interpretive execution of SIGP external call Let the hardware handle most cases of SIGP external call (IPI) and wire up the fixup code for the corner cases. 5. Initial preparations for the IBC facility Prepare the code to handle instruction blocking
-
Michael Mueller authored
This patch splits the SIE state guest prefix at offset 4 into a prefix bit field. Additionally it provides the access functions: - kvm_s390_get_prefix() - kvm_s390_set_prefix() to access the prefix per vcpu. Signed-off-by:
Michael Mueller <mimu@linux.vnet.ibm.com> Reviewed-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by:
Christian Borntraeger <borntraeger@de.ibm.com>
-
Michael Mueller authored
The patch adds functionality to retrieve the IBC configuration by means of function sclp_get_ibc(). Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by:
-
David Hildenbrand authored
If the sigp interpretation facility is installed, most SIGP EXTERNAL CALL operations will be interpreted instead of intercepted. A partial execution interception will occurr at the sending cpu only if the target cpu is in the wait state ("W" bit in the cpuflags set). Instruction interception will only happen in error cases (e.g. cpu addr invalid). As a sending cpu might set the external call interrupt pending flags at the target cpu at every point in time, we can't handle this kind of interrupt using our kvm interrupt injection mechanism. The injection will be done automatically by the SIE when preparing the start of the target cpu. Signed-off-by:David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by:
-
Alexander Yarygin authored
The current trace definition doesn't work very well with the perf tool. Perf shows a "insn_to_mnemonic not found" message. Let's handle the decoding completely in a parseable format. Signed-off-by:
Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by:
-
Alexander Yarygin authored
This patch adds a new decoder of SIE intercepted instructions. The decoder implemented as a macro and potentially can be used in both kernelspace and userspace. Note that this simplified instruction decoder is only intended to be used with the subset of instructions that may cause a SIE intercept. Signed-off-by:
-
Alexander Yarygin authored
Use the symbolic translation tables from sie.h for decoding diag, sigp and sie exit codes. Signed-off-by:
-
Alexander Yarygin authored
This patch defines tables of reasons for exiting from SIE mode in a new sie.h header file. Tables contain SIE intercepted codes, intercepted instructions and program interruptions codes. Signed-off-by:
-
Thomas Huth authored
Use the new helper function kvm_arch_fault_in_page() for faulting-in the guest pages and only inject addressing errors when we've really hit a bad address (and return other error codes to userspace instead). Signed-off-by:
Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by:
-
Thomas Huth authored
Rework the function kvm_arch_fault_in_sync() to become a proper helper function for faulting-in a guest page. Now it takes the guest address as a parameter and does not ignore the possible error code from gmap_fault() anymore (which could cause undetected error conditions before). Signed-off-by:
-
Thomas Huth authored
If the new PSW for program interrupts is invalid, the VM ends up in an endless loop of specification exceptions. Since there is not much left we can do in this case, we should better drop to userspace instead so that the crash can be reported to the user. Signed-off-by:
-
Thomas Huth authored
As a program status word is also invalid (and thus generates an specification exception) if the instruction address is not even, we should test this in is_valid_psw(), too. This patch also exports the function so that it becomes available for other parts of the S390 KVM code as well. Signed-off-by:
-
Martin Schwidefsky authored
Use the mm semaphore to serialize multiple invocations of s390_enable_skey. The second CPU faulting on a storage key operation needs to wait for the completion of the page table update. Taking the mm semaphore writable has the positive side-effect that it prevents any host faults from taking place which does have implications on keys vs PGSTE. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
- 12 May, 2014 1 commit
-
-
Jan Kiszka authored
Regression of 346874c9: PAE is set in long mode, but that does not mean we have valid PDPTRs. Signed-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
- 08 May, 2014 1 commit
-
-
Gabriel L. Somlo authored
Treat monitor and mwait instructions as nop, which is architecturally correct (but inefficient) behavior. We do this to prevent misbehaving guests (e.g. OS X <= 10.7) from crashing after they fail to check for monitor/mwait availability via cpuid. Since mwait-based idle loops relying on these nop-emulated instructions would keep the host CPU pegged at 100%, do NOT advertise their presence via cpuid, to prevent compliant guests from using them inadvertently. Signed-off-by:
Gabriel L. Somlo <somlo@cmu.edu> Signed-off-by:
-
- 07 May, 2014 3 commits
-
-
Michael S. Tsirkin authored
It seems that it's easy to implement the EOI assist on top of the PV EOI feature: simply convert the page address to the format expected by PV EOI. Notes: -"No EOI required" is set only if interrupt injected is edge triggered; this is true because level interrupts are going through IOAPIC which disables PV EOI. In any case, if guest triggers EOI the bit will get cleared on exit. -For migration, set of HV_X64_MSR_APIC_ASSIST_PAGE sets KVM_PV_EOI_EN internally, so restoring HV_X64_MSR_APIC_ASSIST_PAGE seems sufficient In any case, bit is cleared on exit so worst case it's never re-enabled -no handling of PV EOI data is performed at HV_X64_MSR_EOI write; HV_X64_MSR_EOI is a separate optimization - it's an X2APIC replacement that lets you do EOI with an MSR and not IO. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Nadav Amit authored
In long-mode, bit 7 in the PDPTE is not reserved only if 1GB pages are supported by the CPU. Currently the bit is considered by KVM as always reserved. Signed-off-by:
-
Nadav Amit authored
The RSP register is not automatically cached, causing mov DR instruction with RSP to fail. Instead the regular register accessing interface should be used. Signed-off-by:
-
