- 30 Mar, 2009 40 commits
-
-
Trent Piepho authored
The v4l2-ioctl core now only allows buffer types for which the corresponding ->vidioc_try_fmt_xxx() methods are defined to be used with vidioc_(g|s)_parm. The driver was only allowing VIDEO_CAPTURE buffers for g_parm, but since the driver defines ->vidioc_try_fmt_vid_overlay() it will now allow VIDEO_OVERLAY buffers as well. This should be fine as the fields the driver fills in, readbuffers and frame rate, aren't wrong for VIDEO_OVERLAY buffers. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Trent Piepho authored
Return EINVAL if VIDIOC_S/G_PARM is called for a buffer type that the driver doesn't define a ->vidioc_try_fmt_XXX() method for. Several other ioctls, like QUERYBUF, QBUF, and DQBUF, etc. do this too. It saves each driver from having to check if the buffer type is one that it supports. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
All drivers that use this device have been converted to v4l2_subdev, so there is no more need to support autoprobing on kernels >= 2.6.22. Signed-off-by:
-
Hans Verkuil authored
This card has the saa6752hs on 7-bit address 0x21 instead of 0x20. Add support in the card definition struct to select which address to use and update the definitions accordingly. Signed-off-by:
-
Michael Krufky authored
Drivers that don't set "config" directly in the set_type function will end up with an invalid configuration value. Check that the value is sane, otherwise initialize to 0. Thanks to James Edward Geiger & Steven Toth for reporting this bug. Cc: Steven Toth <stoth@linuxtv.org> Cc: James Edward Geiger <james.e.geiger@gmail.com> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Artem Makhutov authored
This patch removes the debug output from stb6100_cfg.h as it is flooding the syslog with tuning data during normal operation. Signed-off-by:
Artem Makhutov <artem@makhutov.org> Acked-by:
Manu Abraham <abraham.manu@linuxtv.org> Signed-off-by:
-
Janne Grunau authored
Makes the next capturing starting faster and more reliable. Signed-off-by:
Janne Grunau <j@jannau.net> Signed-off-by:
-
Janne Grunau authored
it gives us a nice and unique prefix per device Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Alan Cox authored
If the card is ejected on some systems you get a spew of messages as other shared IRQ devices interrupt between the card eject and the card IRQ disable. We don't need to spew them all out Closes #7472 Signed-off-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Alan Cox authored
The ioremap one was reported in October 2007 (Bug 9146), the kmalloc one was blindingly obvious while looking at the ioremap one The bug suggests some other configuration for lots of I/O memory (32MB per device is ioremapped) but I'll leave that to the real maintainers Signed-off-by:
-
Daniel Glöckner authored
Shared memory mappings on nommu machines require a get_unmapped_area file operation that suggests an address for the mapping. This patch adds a way for v4l2 drivers to provide this callback. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
-
Randy Dunlap authored
Fix printk format warning: drivers/media/video/zoran/zoran_driver.c:345: warning: format '%lx' expects type 'long unsigned int', but argument 5 has type 'phys_addr_t' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
klaas de waal authored
Separate tuning table for DVB-C solves tuning problem at 388MHz TechnoTrend C-1501 DVB-C card does not lock on 388MHz. I assume that existing frequency table is valid for DVB-T. This is suggested by the name of the table: tda827xa_dvbt. Added a table for DVB-C with the name tda827xa_dvbc. Added runtime selection of the DVB-C table when the tuner is type FE_QAM. This should leave the behaviour of this driver with with DVB_T tuners unchanged. This modification is in file tda827x.c The tda827x.c gives the following warning message when debug=1: tda827x: tda827x_config not defined, cannot set LNA gain! Solved this by adding a tda827x_config struct in budget-ci.c. Signed-off-by:
Klaas de Waal <klaas.de.waal@gmail.com> Signed-off-by:
-
Stoyan Gaydarov authored
Signed-off-by:
Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by:
-
Andy Walls authored
Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Janne Grunau authored
unlock io_mutex in hdpvr_stop_streaming hdpvr_disconnect to allow the streaming worker to stop before we flush the workqueue. do not return to user space with mutex held in vidioc_encoder_cmd with an unknown encoder command. Signed-off-by:
-
Janne Grunau authored
simplifies check for available data with hdpvr_get_next_buffer Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Janne Grunau authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb/dvb-usb/ce6230.c: In function ‘ce6230_i2c_xfer’: drivers/media/dvb/dvb-usb/ce6230.c:107: warning: ‘ret’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/video/usbvideo/vicam.c: In function ‘vicam_open’: drivers/media/video/usbvideo/vicam.c:194: warning: ‘fw’ may be used uninitialized in this function drivers/media/video/dabusb.c: In function ‘dabusb_probe’: drivers/media/video/dabusb.c:337: warning: ‘fw’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
Documentation/video4linux/v4lgrab.c: In function ‘main’: Documentation/video4linux/v4lgrab.c:193: warning: ‘src_depth’ is used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘b’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘g’ may be used uninitialized in this function Documentation/video4linux/v4lgrab.c:108: warning: ‘r’ may be used uninitialized in this function Signed-off-by: -
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Douglas Schilling Landgraf authored
Reported-by:
Bruna Griebeler <bruna@griebeler.com> Tested-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
-
Hans de Goede authored
Prefer the gspca sonixj driver for the Philips SPC600NC webcam instead of the sn9c102 driver. As we've got userreports that it works with the gspca driver, whereas it fails with the sn9c102 driver, see: https://bugzilla.redhat.com/show_bug.cgi?id=477111Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jean-Francois Moine authored
Tested-by:
Frank Zago <frank@zago.net> Acked-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Antti Palosaari authored
Add driver for Intel CE6230 DVB-T USB 2.0 COFDM demodulator Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Add chip IDs and configuration registers needed for Intel CE6230 and Intel CE6231. Signed-off-by:
-
Theodore Kilgore authored
The code in the new sq905c.c is based upon the structure of the code in gspca/sq905.c, and upon the code in libgphoto2/camlibs/digigr8, which supports the same set of cameras in stillcam mode. I am a co-author of gspca/sq905.c and I am the sole author of libgphoto2/camlibs/digigr8, which is licensed under the LGPL. I hereby give myself permission to use my own code from libgphoto2 in gspca/sq905c.c. Signed-off-by:
Theodore Kilgore <kilgota@auburn.edu> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Mike Isely authored
Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Mike Isely authored
Signed-off-by:
-
Mike Isely authored
Forgot to include the tda9887 component when moving to v4l2-subdev. I got fooled because its name is "tuner", the same as the tuner module. Silly me. Signed-off-by:
-
