1. 01 Mar, 2015 5 commits
  2. 28 Feb, 2015 7 commits
    • Eric Dumazet's avatar
      tcp: cleanup static functions · 74abc20c
      Eric Dumazet authored
      tcp_fastopen_create_child() is static and should not be exported.
      
      tcp4_gso_segment() and tcp6_gso_segment() should be static.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      74abc20c
    • Andrew Schwartzmeyer's avatar
      hyperv: Implement netvsc_get_channels() ethool op · 59995370
      Andrew Schwartzmeyer authored
      This adds support for reporting the actual and maximum combined channels
      count of the hv_netvsc driver via 'ethtool --show-channels'.
      
      This required adding 'max_chn' to 'struct netvsc_device', and assigning
      it 'rsscap.num_recv_que' in 'rndis_filter_device_add'. Now we can access
      the combined maximum channel count via 'struct netvsc_device' in the
      ethtool callback.
      Signed-off-by: default avatarAndrew Schwartzmeyer <andrew@schwartzmeyer.com>
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      59995370
    • David S. Miller's avatar
      Merge branch 'tcp-tso' · f9c7ce18
      David S. Miller authored
      Eric Dumazet says:
      
      ====================
      tcp: tso improvements
      
      This patch serie reworks tcp_tso_should_defer() a bit
      to get less bursts, and better ECN behavior.
      
      We also removed tso_deferred field in tcp socket.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9c7ce18
    • Eric Dumazet's avatar
      tcp: tso: allow CA_CWR state in tcp_tso_should_defer() · a0ea700e
      Eric Dumazet authored
      Another TCP issue is triggered by ECN.
      
      Under pressure, receiver gets ECN marks, and send back ACK packets
      with ECE TCP flag. Senders enter CA_CWR state.
      
      In this state, tcp_tso_should_defer() is short cut :
      
      if (icsk->icsk_ca_state != TCP_CA_Open)
          goto send_now;
      
      This means that about all ACK packets we receive are triggering
      a partial send, and because cwnd is kept small, we can only send
      a small amount of data for each incoming ACK,
      which in return generate more ACK packets.
      
      Allowing CA_Open and CA_CWR states to enable TSO defer in
      tcp_tso_should_defer() brings performance back :
      TSO autodefer has more chance to defer under pressure.
      
      This patch increases TSO and LRO/GRO efficiency back to normal levels,
      and does not impact overall ECN behavior.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a0ea700e
    • Eric Dumazet's avatar
      tcp: tso: restore IW10 after TSO autosizing · 50c8339e
      Eric Dumazet authored
      With sysctl_tcp_min_tso_segs being 4, it is very possible
      that tcp_tso_should_defer() decides not sending last 2 MSS
      of initial window of 10 packets. This also applies if
      autosizing decides to send X MSS per GSO packet, and cwnd
      is not a multiple of X.
      
      This patch implements an heuristic based on age of first
      skb in write queue : If it was sent very recently (less than half srtt),
      we can predict that no ACK packet will come in less than half rtt,
      so deferring might cause an under utilization of our window.
      
      This is visible on initial send (IW10) on web servers,
      but more generally on some RPC, as the last part of the message
      might need an extra RTT to get delivered.
      
      Tested:
      
      Ran following packetdrill test
      // A simple server-side test that sends exactly an initial window (IW10)
      // worth of packets.
      
      `sysctl -e -q net.ipv4.tcp_min_tso_segs=4`
      
      0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
      +0    setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
      +0    bind(3, ..., ...) = 0
      +0    listen(3, 1) = 0
      
      +.1   < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
      +0    > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 6>
      +.1   < . 1:1(0) ack 1 win 257
      +0    accept(3, ..., ...) = 4
      
      +0    write(4, ..., 14600) = 14600
      +0    > . 1:5841(5840) ack 1 win 457
      +0    > . 5841:11681(5840) ack 1 win 457
      // Following packet should be sent right now.
      +0    > P. 11681:14601(2920) ack 1 win 457
      
      +.1   < . 1:1(0) ack 14601 win 257
      
      +0    close(4) = 0
      +0    > F. 14601:14601(0) ack 1
      +.1   < F. 1:1(0) ack 14602 win 257
      +0    > . 14602:14602(0) ack 2
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      50c8339e
    • Eric Dumazet's avatar
      tcp: tso: remove tp->tso_deferred · 5f852eb5
      Eric Dumazet authored
      TSO relies on ability to defer sending a small amount of packets.
      Heuristic is to wait for future ACKS in hope to send more packets at once.
      Current algorithm uses a per socket tso_deferred field as a pseudo timer.
      
      This pseudo timer relies on future ACK, but there is no guarantee
      we receive them in time.
      
      Fix would be to use a real timer, but cost of such timer is probably too
      expensive for typical cases.
      
      This patch changes the logic to test the time of last transmit,
      because we should not add bursts of more than 1ms for any given flow.
      
      We've used this patch for about two years at Google, before FQ/pacing
      as it would reduce a fair amount of bursts.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5f852eb5
    • Ben Hutchings's avatar
      usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME drivers · 6588af61
      Ben Hutchings authored
      Currently the usbnet core does not update the tx_packets statistic for
      drivers with FLAG_MULTI_PACKET and there is no hook in the TX
      completion path where they could do this.
      
      cdc_ncm and dependent drivers are bumping tx_packets stat on the
      transmit path while asix and sr9800 aren't updating it at all.
      
      Add a packet count in struct skb_data so these drivers can fill it
      in, initialise it to 1 for other drivers, and add the packet count
      to the tx_packets statistic on completion.
      Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
      Tested-by: default avatarBjørn Mork <bjorn@mork.no>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6588af61
  3. 27 Feb, 2015 16 commits
    • David S. Miller's avatar
      Merge branch 'tipc-next' · 721a57a0
      David S. Miller authored
      Erik Hugne says:
      
      ====================
      tipc: bug fix and some improvements
      
      Most important is a fix for a nullptr exception that would occur when
      name table subscriptions fail. The remaining patches are performance
      improvements and cosmetic changes.
      
      v2: remove unnecessary whitespace in patch #2
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      721a57a0
    • Erik Hugne's avatar
      tipc: make media address offset a common define · d76a436d
      Erik Hugne authored
      With the exception of infiniband media which does not use media
      offsets, the media address is always located at offset 4 in the
      media info field as defined by the protocol, so we move the
      definition to the generic bearer.h
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d76a436d
    • Erik Hugne's avatar
      tipc: rename media/msg related definitions · 91e2eb56
      Erik Hugne authored
      The TIPC_MEDIA_ADDR_SIZE and TIPC_MEDIA_ADDR_OFFSET names
      are misleading, as they actually define the size and offset of
      the whole media info field and not the address part. This patch
      does not have any functional changes.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      91e2eb56
    • Erik Hugne's avatar
      tipc: purge links when bearer is disabled · afaa3f65
      Erik Hugne authored
      If a bearer is disabled by manual intervention, all links over that
      bearer should be purged, indicated with the 'shutting_down' flag.
      Otherwise tipc will get confused if a new bearer is enabled using
      a different media type.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      afaa3f65
    • Erik Hugne's avatar
      tipc: fix nullpointer bug when subscribing to events · 7fe8097c
      Erik Hugne authored
      If a subscription request is sent to a topology server
      connection, and any error occurs (malformed request, oom
      or limit reached) while processing this request, TIPC should
      terminate the subscriber connection. While doing so, it tries
      to access fields in an already freed (or never allocated)
      subscription element leading to a nullpointer exception.
      We fix this by removing the subscr_terminate function and
      terminate the connection immediately upon any subscription
      failure.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7fe8097c
    • Erik Hugne's avatar
      tipc: only create header copy for name distr messages · 3622c36f
      Erik Hugne authored
      The TIPC name distributor pushes topology updates to the cluster
      neighbors. Currently this is done in a unicast manner, and the
      skb holding the update is cloned for each cluster member. This
      is unnecessary, as we only modify the destnode field in the header
      so we change it to do pskb_copy instead.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3622c36f
    • Jiri Pirko's avatar
      team: allow TSO being set on master · 247f6d0f
      Jiri Pirko authored
      This patch allows TSO being set/unset on the master, so that GSO
      segmentation is done after team layer.
      
      Similar patch is present for bonding:
      	b0ce3508 ("bonding: allow TSO being set on bonding master")
      and bridge:
      	f902e881 ("bridge: Add ability to enable TSO")
      Suggested-by: default avatarJiri Prochazka <jprochaz@redhat.com>
      Signed-off-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      247f6d0f
    • David S. Miller's avatar
      Merge branch 'fib_trie_remove_leaf_info' · 7eb60345
      David S. Miller authored
      Alexander Duyck says:
      
      ====================
      fib_trie: Remove leaf_info structure
      
      This patch set removes the leaf_info structure from the IPv4 fib_trie.  The
      general idea is that the leaf_info structure itself only held about 6
      actual bits of data, beyond that it was mostly just waste.  As such we can
      drop the structure, move the 1 byte representing the prefix/suffix length
      into the fib_alias and just link it all into one list.
      
      My testing shows that this saves somewhere between 4 to 10ns depending on
      the type of test performed.  I'm suspecting that this represents 1 to 2 L1
      cache misses saved per look-up.
      
      One side effect of this change is that semantic_match_miss will now only
      increment once per leaf instead of once per leaf_info miss.  However the
      stat is already skewed now that we perform a preliminary check on the leaf
      as a part of the look-up.
      
      I also have gone through and addressed a number of ordering issues in the
      first patch since I had misread the behavior of list_add_tail.
      
      I have since run some additional testing and verified the resulting lists
      are in the same order when combining multiple prefix length and tos values
      in a single leaf.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7eb60345
    • Alexander Duyck's avatar
      fib_trie: Remove leaf_info · 79e5ad2c
      Alexander Duyck authored
      At this point the leaf_info hash is redundant.  By adding the suffix length
      to the fib_alias hash list we no longer have need of leaf_info as we can
      determine the prefix length from fa_slen.  So we can compress things by
      dropping the leaf_info structure from fib_trie and instead directly connect
      the leaves to the fib_alias hash list.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      79e5ad2c
    • Alexander Duyck's avatar
      fib_trie: Add slen to fib alias · 9b6ebad5
      Alexander Duyck authored
      Make use of an empty spot in the alias to store the suffix length so that
      we don't need to pull that information from the leaf_info structure.
      
      This patch also makes a slight change to the user statistics.  Instead of
      incrementing semantic_match_miss once per leaf_info miss we now just
      increment it once per leaf if a match was not found.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9b6ebad5
    • Alexander Duyck's avatar
      fib_trie: Replace plen with slen in leaf_info · 5786ec60
      Alexander Duyck authored
      This replaces the prefix length variable in the leaf_info structure with a
      suffix length value, or host identifier length in bits.  By doing this it
      makes it easier to sort out since the tnodes and leaf are carrying this
      value as well since it is compatible with the ->pos field in tnodes.
      
      I also cleaned up one spot that had some list manipulation that could be
      simplified.  I basically updated it so that we just use hlist_add_head_rcu
      instead of calling hlist_add_before_rcu on the first node in the list.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5786ec60
    • Alexander Duyck's avatar
      fib_trie: Convert fib_alias to hlist from list · 56315f9e
      Alexander Duyck authored
      There isn't any advantage to having it as a list and by making it an hlist
      we make the fib_alias more compatible with the list_info in terms of the
      type of list used.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      56315f9e
    • David S. Miller's avatar
      Merge branch 'ip_level_multicast_join_leave' · 7705f730
      David S. Miller authored
      Madhu Challa says:
      
      ====================
      Multicast group join/leave at ip level
      
      This series enables configuring multicast group join/leave at ip level
      by extending the "ip address" command.
      
      It adds a new control socket mc_autojoin_sock and ifa_flag IFA_F_MCAUTOJOIN
      to invoke the corresponding igmp group join/leave api.
      
      Since the igmp group join/leave api takes the rtnl_lock the code had to
      be refactored by adding a shim layer prefixed by __ that can be invoked
      by code that already has the rtnl_lock. This way we avoid proliferation of
      work queues.
      
      The first patch in this series does the refactoring for igmp v6.
      Its based on igmp v4 changes that were added by Eric Dumazet.
      
      The second patch in this series does the group join/leave based on the
      setting of the IFA_F_MCAUTOJOIN flag.
      
      v5:
      - addressed comments from Daniel Borkmann.
       - removed blank line in patch 1/2
       - removed unused variable, const arg in patch 2/2
      v4:
      - addressed comments from Yoshifuji Hideaki.
       - Remove WARN_ON not needed because we return a value from v2.
      - addressed comments from Daniel Borkmann.
       - rename sock to mc_autojoin_sk
       - ip_mc_config() pass ifa so it needs one less argument.
       - igmp_net_{init|destroy}() use inet_ctl_sock_{create|destroy}
       - inet_rtm_newaddr() change scope of ret.
       - igmp_net_init() no need to initialize sock to NULL.
      v3:
      - addressed comments from David Miller.
       - fixed indentation and local variable order.
      v2:
      - addressed comments from Eric Dumazet.
       - removed workqueue and call __ip_mc_{join|leave}_group or
         __ipv6_sock_mc_{join|drop}
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7705f730
    • Madhu Challa's avatar
      multicast: Extend ip address command to enable multicast group join/leave on · 93a714d6
      Madhu Challa authored
      Joining multicast group on ethernet level via "ip maddr" command would
      not work if we have an Ethernet switch that does igmp snooping since
      the switch would not replicate multicast packets on ports that did not
      have IGMP reports for the multicast addresses.
      
      Linux vxlan interfaces created via "ip link add vxlan" have the group option
      that enables then to do the required join.
      
      By extending ip address command with option "autojoin" we can get similar
      functionality for openvswitch vxlan interfaces as well as other tunneling
      mechanisms that need to receive multicast traffic. The kernel code is
      structured similar to how the vxlan driver does a group join / leave.
      
      example:
      ip address add 224.1.1.10/24 dev eth5 autojoin
      ip address del 224.1.1.10/24 dev eth5
      Signed-off-by: default avatarMadhu Challa <challa@noironetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      93a714d6
    • Madhu Challa's avatar
      igmp v6: add __ipv6_sock_mc_join and __ipv6_sock_mc_drop · 46a4dee0
      Madhu Challa authored
      Based on the igmp v4 changes from Eric Dumazet.
      959d10f6("igmp: add __ip_mc_{join|leave}_group()")
      
      These changes are needed to perform igmp v6 join/leave while
      RTNL is held.
      
      Make ipv6_sock_mc_join and ipv6_sock_mc_drop wrappers around
      __ipv6_sock_mc_join and  __ipv6_sock_mc_drop to avoid
      proliferation of work queues.
      Signed-off-by: default avatarMadhu Challa <challa@noironetworks.com>
      Acked-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      46a4dee0
    • Tom Herbert's avatar
      udp: In udp_flow_src_port use random hash value if skb_get_hash fails · 723b8e46
      Tom Herbert authored
      In the unlikely event that skb_get_hash is unable to deduce a hash
      in udp_flow_src_port we use a consistent random value instead.
      This is specified in GRE/UDP draft section 3.2.1:
      https://tools.ietf.org/html/draft-ietf-tsvwg-gre-in-udp-encap-04Signed-off-by: default avatarTom Herbert <therbert@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      723b8e46
  4. 26 Feb, 2015 5 commits
    • Roopa Prabhu's avatar
      bridge: fix link notification skb size calculation to include vlan ranges · fed0a159
      Roopa Prabhu authored
      my previous patch skipped vlan range optimizations during skb size
      calculations for simplicity.
      
      This incremental patch considers vlan ranges during
      skb size calculations. This leads to a bit of code duplication
      in the fill and size calculation functions. But, I could not find a
      prettier way to do this. will take any suggestions.
      
      Previously, I had reused the existing br_get_link_af_size size calculation
      function to calculate skb size for notifications. Reusing it this time
      around creates some change in behaviour issues for the usual
      .get_link_af_size callback.
      
      This patch adds a new br_get_link_af_size_filtered() function to
      base the size calculation on the incoming filter flag and include
      vlan ranges.
      Signed-off-by: default avatarRoopa Prabhu <roopa@cumulusnetworks.com>
      Reviewed-by: default avatarScott Feldman <sfeldma@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fed0a159
    • David S. Miller's avatar
      Merge branch 'rocker-next' · 90030191
      David S. Miller authored
      Scott Feldman says:
      
      ====================
      rocker cleanups
      
      Pushing out some rocker cleanups I've had in my queue for a while.  Nothing
      major, just some sync-up with changes that already went into device code
      (hard-coding desc err return values and lport renaming).  Also fixup
      port fowarding transitions prompted by some DSA discussions about how to
      restore port state when port leaves bridge.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      90030191
    • Scott Feldman's avatar
      rocker: put port in FORWADING state after leaving bridge · e47172ab
      Scott Feldman authored
      Cleanup the port forwarding state transitions for the cases when the port
      joins or leaves a bridge, or is brought admin UP or DOWN.  When port is
      bridged, we can rely on bridge driver putting port in correct state using
      STP callback into port driver, regardless if bridge is enabled for STP or not.
      When port is not bridged, we can reuse some of the STP code to enabled or
      disable forwarding depending on UP or DOWN.
      
      Tested by trying all the transitions from bridge/not bridge, and UP/DOWN, and
      verifying port is in the correct forwarding state after each transition.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e47172ab
    • Scott Feldman's avatar
      rocker: rename lport to pport · 4a6bb6d3
      Scott Feldman authored
      This is just a rename of physical ports from "lport" to "pport".  Not a
      functional change.  OF-DPA uses logical ports (lport) for tunnels, but the
      driver (and device) were using "lport" for physical ports.  Renaming physical
      ports references to "pport", freeing up "lport" for use later with tunnels.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4a6bb6d3
    • Scott Feldman's avatar
      rocker: fix non-portable err return codes · 7eb344f8
      Scott Feldman authored
      The rocker device returns error codes if something goes wrong with descriptor
      processing.  Originally the device used standard errno codes for different
      errors, but since those errno codes aren't portable across ARCHs, the device
      now returns hard-coded error codes that stay constant across diff ARCHs.  Fix
      driver to use those same hard-coded values.
      Signed-off-by: default avatarScott Feldman <sfeldma@gmail.com>
      Acked-by: default avatarJiri Pirko <jiri@resnulli.us>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7eb344f8
  5. 25 Feb, 2015 7 commits
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next · 009f33ed
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      Intel Wired LAN Driver Updates 2015-02-24
      
      This series contains updates to i40e and i40evf only, which bumps their
      versions to i40e 1.2.9 and i40evf 1.2.3.
      
      Paul fixes i40e_debug_aq() for big endian machines by adding the
      appropriate LExx_TO_CPU wrappers.
      
      Catherine adds a requested speed variable to the link_status to store the
      last speeds we requested from the firmware and use the advertised speed
      settings in get_settings in ethtool now that we have it.  Due to the
      new code addition, she also refactors get_settings to improve readability
      and to accommodate some of the longer lines of code by adding two
      functions i40e_get_settings_link_up() and i40e_get_settings_link_down().
      
      Carolyn adds a struct to the VSI struct to keep track of RXNFC settings
      done via ethtool.  Adds more information to the interrupt vector
      names, specifically to the VF misc vector name so that we can distinguish
      between all the interrupts.
      
      Ashish enables the i40evf driver to enable debug prints via ethtool.
      
      Mitch updates i40e to enable packet split only when IOMMU is in use,
      since it shows a distinct advantage over the single-buffer path
      because it minimizes DMA mapping and unmapping.  Also adds the receive
      routine in use to the features log message to be able to print the
      receive packet split status.
      
      Greg adds the ability to get, set and commit permanently the NPAR
      partition BW configuration through configfs.  Enables an application
      to query the i40e driver's private flags to get the status of NPAR
      enablement via ethtool.
      
      Neerav adds support for bridge offload ndo_ops getlink and setlink
      to enable bridge hardware mode as per the mode set via IFLA_BRIDGE_MODE.
      The support is only enabled in the case of a PF VSI and not available for
      any other VSI type.
      
      Kevin fixes i40e by ensuring the BUF and FLAG_RD flags are set for
      indirect admin queue command.
      
      Vasu updates the driver to setup FCoE netdev device type as "fcoe", so that
      it shows up in sysfs as FCoE device.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      009f33ed
    • Guenter Roeck's avatar
      net: dsa: Introduce dsa_is_port_initialized · d79d2107
      Guenter Roeck authored
      To avoid race conditions when using the ds->ports[] array,
      we need to check if the accessed port has been initialized.
      Introduce and use helper function dsa_is_port_initialized
      for that purpose and use it where needed.
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d79d2107
    • David S. Miller's avatar
      Merge branch 'sf2_hwbridge' · bb66be1c
      David S. Miller authored
      Florian Fainelli says:
      
      ====================
      net: dsa: integration with SWITCHDEV for HW bridging
      
      This patch set provides the DSA and SWITCHDEV integration bits together and
      modifies the bcm_sf2 driver accordingly such that it works properly with HW
      bridging.
      
      Changes in v3:
      
      - add back the null pointer check in dsa_slave_br_port_mask from Guenter
      - slightly rework patch 1 commit message not to mention the function name
        we add in patch 2
      
      Changes in v2:
      
      - avoid a race condition in how DSA network devices are created, patch from
        Guenter Roeck
      - provide a consistent and work STP state once a port leaves the bridge
      - retain a bridge device pointer to properly flag port/bridge membership
      - properly flush the ARL (Address Resolution Logic) in bcm_sf2.c
      - properly retain port membership when individually bringing devices up/down
        while they are members of a bridge
      
      We discussed on the mailing-list the possibility of standardizing a "fdb_flush"
      operation for DSA switch drivers, looking at the Marvell and Broadcom switches,
      I am not convinced this is practical or diserable as the terminologies vary
      here, but there is nothing preventing us from doing it later.
      
      Many thanks to Guenter and Andrew for both testing and providing feedback.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb66be1c
    • Florian Fainelli's avatar
      net: dsa: bcm_sf2: add HW bridging support · 12f460f2
      Florian Fainelli authored
      Implement the bridge join, leave and set_stp callbacks by making that
      we do the following:
      
      - when a port joins the bridge, all existing ports in the bridge get
        their VLAN control register updated with that joining port
      - the joining port is including all existing bridge ports in its own
        VLAN control register
      
      The leave operation is fairly similar, special care must be taken to
      make sure that port leaving the bridging is not removing itself from its
      own VLAN control register.
      
      Since the various BR_* states apply directly to our HW semantics, we
      just need to translate these constants into their corresponding HW
      settings, and voila!
      
      We make sure to trigger a fast-ageing process for ports that are
      joining/leaving the bridge and transition from incompatible states, this
      is equivalent to triggering an ARL flush for that port.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      12f460f2
    • Florian Fainelli's avatar
      net: dsa: integrate with SWITCHDEV for HW bridging · b73adef6
      Florian Fainelli authored
      In order to support bridging offloads in DSA switch drivers, select
      NET_SWITCHDEV to get access to the port_stp_update and parent_get_id
      NDOs that we are required to implement.
      
      To facilitate the integratation at the DSA driver level, we implement 3
      types of operations:
      
      - port_join_bridge
      - port_leave_bridge
      - port_stp_update
      
      DSA will resolve which switch ports that are currently bridge port
      members as some Switch hardware/drivers need to know about that to limit
      the register programming to just the relevant registers (especially for
      slow MDIO buses).
      
      We also take care of setting the correct STP state when slave network
      devices are brought up/down while being bridge members.
      
      Finally, when a port is leaving the bridge, we make sure we set in
      BR_STATE_FORWARDING state, otherwise the bridge layer would leave it
      disabled as a result of having left the bridge.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Tested-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b73adef6
    • Guenter Roeck's avatar
      net: dsa: Ensure that port array elements are initialized before being used · d87d6f44
      Guenter Roeck authored
      A network device notifier can be called for one or more of the created
      slave devices before all slave devices have been registered. This can
      result in a mismatch between ds->phys_port_mask and the registered devices
      by the time the call is made, and it can result in a slave device being
      added to a bridge before its entry in ds->ports[] has been initialized.
      
      Rework the initialization code to initialize entries in ds->ports[] in
      dsa_slave_create. With this change, dsa_slave_create no longer needs
      to return slave_dev but can return an error code instead.
      Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d87d6f44
    • Sravanthi Tangeda's avatar
      i40e/i40evf: Update driver versions · 5b8eb176
      Sravanthi Tangeda authored
      Bump i40e to 1.2.9 and i40evf 1.2.3
      
      Also update the copyright year.
      
      Change-ID: I345d777e94abd0acffe6a28793f675d251a86299
      Signed-off-by: default avatarSravanthi Tangeda <sravanthi.tangeda@intel.com>
      Tested-by: default avatarJim Young <james.m.young@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      5b8eb176