btf__parse() is repeated after successful setup, leaving the first
instance leaked. Remove redundant and premature call.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-8-andrii@kernel.org

Free up used resources at the end and on error. Also make it more
obvious that there is btf__parse() call that creates struct btf
instance.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-7-andrii@kernel.org

Inner array of allocated strings wasn't freed on success. Now it's
always freed.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-6-andrii@kernel.org

Array holding per-cpu values wasn't freed. Fix that.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211107165521.9240-5-andrii@kernel.org

Free up memory and resources used by temporary allocated memstream and
btf_dump instance.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-4-andrii@kernel.org

It's not enough to just free(map->inner_map), as inner_map itself can
have extra memory allocated, like map name.

Fixes: 646f02ff ("libbpf: Add BTF-defined map-in-map support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-3-andrii@kernel.org

When adding -fsanitize=address to SAN_CFLAGS, it has to be passed both
to compiler through CFLAGS as well as linker through LDFLAGS. Add
SAN_CFLAGS into LDFLAGS to allow building selftests with ASAN.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-2-andrii@kernel.org

Andrii Nakryiko says:

====================

This patch set adds unified OPTS-based low-level bpf_prog_load() API for
loading BPF programs directly into kernel without utilizing libbpf's
bpf_object abstractions. This OPTS-based interface allows for future
extensions without breaking backwards or forward API and ABI compatibility.
Similar approach will be used for other low-level APIs that require extensive
sets of parameters, like BPF_MAP_CREATE command.

First half of the patch set adds libbpf API, cleans up internal usage of
to-be-deprecated APIs, etc. Second half cleans up and converts selftests away
from using deprecated APIs. See individual patches for more details.

v1->v2:
  - dropped exposing sys_bpf() into public API (Alexei, Daniel);
  - also dropped bpftool/cgroup.c fix for unistd.h include because it's not
    necessary due to sys_bpf() staying as is.

Cc: Hengqi Chen <hengqi.chen@gmail.com>
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Remove the second part of prog loading testing helper re-definition:

  -Dbpf_load_program=bpf_test_load_program

This completes the clean up of deprecated libbpf program loading APIs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-13-andrii@kernel.org

-Dbpf_prog_load_deprecated=bpf_prog_test_load trick is both ugly and
breaks when deprecation goes into effect due to macro magic. Convert all
the uses to explicit bpf_prog_test_load() calls which avoid deprecation
errors and makes everything less magical.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-12-andrii@kernel.org

Move testing prog and object load wrappers (bpf_prog_test_load and
bpf_test_load_program) into testing_helpers.{c,h} and get rid of
otherwise useless test_stub.c. Make testing_helpers.c available to
non-test_progs binaries as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-11-andrii@kernel.org

Convert all the uses of legacy low-level BPF program loading APIs
(mostly bpf_load_program_xattr(), but also some bpf_verify_program()) to
bpf_prog_load() uses.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-10-andrii@kernel.org

Fix few more SEC() definitions that were previously missed.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-9-andrii@kernel.org

This deprecation annotation has no effect because for struct deprecation
attribute has to be declared after struct definition. But instead of
moving it to the end of struct definition, remove it. When deprecation
will go in effect at libbpf v0.7, this deprecation attribute will cause
libbpf's own source code compilation to trigger deprecation warnings,
which is unavoidable because libbpf still has to support that API.

So keep deprecation of APIs, but don't mark structs used in API as
deprecated.

Fixes: e21d585c ("libbpf: Deprecate multi-instance bpf_program APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-8-andrii@kernel.org

Switch to bpf_prog_load() instead.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-7-andrii@kernel.org

Remove all the internal uses of libbpf APIs that are slated to be
deprecated in v0.7.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-6-andrii@kernel.org

Remove all the internal uses of bpf_load_program_xattr(), which is
slated for deprecation in v0.7.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-5-andrii@kernel.org

Add a new unified OPTS-based low-level API for program loading,
bpf_prog_load() ([0]).  bpf_prog_load() accepts few "mandatory"
parameters as input arguments (program type, name, license,
instructions) and all the other optional (as in not required to specify
for all types of BPF programs) fields into struct bpf_prog_load_opts.

This makes all the other non-extensible APIs variant for BPF_PROG_LOAD
obsolete and they are slated for deprecation in libbpf v0.7:
  - bpf_load_program();
  - bpf_load_program_xattr();
  - bpf_verify_program().

Implementation-wise, internal helper libbpf__bpf_prog_load is refactored
to become a public bpf_prog_load() API. struct bpf_prog_load_params used
internally is replaced by public struct bpf_prog_load_opts.

Unfortunately, while conceptually all this is pretty straightforward,
the biggest complication comes from the already existing bpf_prog_load()
*high-level* API, which has nothing to do with BPF_PROG_LOAD command.

We try really hard to have a new API named bpf_prog_load(), though,
because it maps naturally to BPF_PROG_LOAD command.

For that, we rename old bpf_prog_load() into bpf_prog_load_deprecated()
and mark it as COMPAT_VERSION() for shared library users compiled
against old version of libbpf. Statically linked users and shared lib
users compiled against new version of libbpf headers will get "rerouted"
to bpf_prog_deprecated() through a macro helper that decides whether to
use new or old bpf_prog_load() based on number of input arguments (see
___libbpf_overload in libbpf_common.h).

To test that existing
bpf_prog_load()-using code compiles and works as expected, I've compiled
and ran selftests as is. I had to remove (locally) selftest/bpf/Makefile
-Dbpf_prog_load=bpf_prog_test_load hack because it was conflicting with
the macro-based overload approach. I don't expect anyone else to do
something like this in practice, though. This is testing-specific way to
replace bpf_prog_load() calls with special testing variant of it, which
adds extra prog_flags value. After testing I kept this selftests hack,
but ensured that we use a new bpf_prog_load_deprecated name for this.

This patch also marks bpf_prog_load() and bpf_prog_load_xattr() as deprecated.
bpf_object interface has to be used for working with struct bpf_program.
Libbpf doesn't support loading just a bpf_program.

The silver lining is that when we get to libbpf 1.0 all these
complication will be gone and we'll have one clean bpf_prog_load()
low-level API with no backwards compatibility hackery surrounding it.

  [0] Closes: https://github.com/libbpf/libbpf/issues/284Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-4-andrii@kernel.org

Allow to control number of BPF_PROG_LOAD attempts from outside the
sys_bpf_prog_load() helper.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-3-andrii@kernel.org

It's confusing that libbpf-provided helper macro doesn't start with
LIBBPF. Also "declare" vs "define" is confusing terminology, I can never
remember and always have to look up previous examples.

Bypass both issues by renaming DECLARE_LIBBPF_OPTS into a short and
clean LIBBPF_OPTS. To avoid breaking existing code, provide:

  #define DECLARE_LIBBPF_OPTS LIBBPF_OPTS

in libbpf_legacy.h. We can decide later if we ever want to remove it or
we'll keep it forever because it doesn't add any maintainability burden.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/bpf/20211103220845.2676888-2-andrii@kernel.org

Fix the `int i` declaration inside the for statement. This is non-C89
compliant. See [0] for user report breaking BCC build.

  [0] https://github.com/libbpf/libbpf/issues/403

Fixes: 18f4fccb ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20211105191055.3324874-1-andrii@kernel.org

Mark bpf_program__load() as deprecated ([0]) since v0.6. Also rename few
internal program loading bpf_object helper functions to have more
consistent naming.

  [0] Closes: https://github.com/libbpf/libbpf/issues/301Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211103051449.1884903-1-andrii@kernel.org

Andrii Nakryiko says:

====================

Few patches fixing various issues discovered by oss-fuzz project fuzzing
bpf_object__open() call. Fixes are mostly focused around additional simple
sanity checks of ELF format: symbols, relos, etc.

v1->v2:
  - address Yonghong's feedback.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add few sanity checks for relocations to prevent div-by-zero and
out-of-bounds array accesses in libbpf.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-6-andrii@kernel.org

e_shnum does include section #0 and as such is exactly the number of ELF
sections that we need to allocate memory for to use section indices as
array indices. Fix the off-by-one error.

This is purely accounting fix, previously we were overallocating one
too many array items. But no correctness errors otherwise.

Fixes: 25bbbd7a ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-5-andrii@kernel.org

.BTF and .BTF.ext ELF sections should have SHT_PROGBITS type and contain
data. If they are not, ELF is invalid or corrupted, so bail out.
Otherwise this can lead to data->d_buf being NULL and SIGSEGV later on.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-4-andrii@kernel.org

If BTF is corrupted DATASEC's variable type ID might be incorrect.
Prevent this easy to detect situation with extra NULL check.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-3-andrii@kernel.org

Prevent divide-by-zero if ELF is corrupted and has zero sh_entsize.
Reported by oss-fuzz project.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211103173213.1376990-2-andrii@kernel.org

Dave Marchevsky says:

====================

bpf_program__get_prog_info_linear is a helper which wraps the
bpf_obj_get_info_by_fd BPF syscall with some niceties that put
all dynamic-length bpf_prog_info in one buffer contiguous with struct
bpf_prog_info, and simplify the selection of which dynamic data to grab.

The resultant combined struct, bpf_prog_info_linear, is persisted to
file by 'perf' to enable later annotation of BPF prog data. libbpf
includes some vaddr <-> offset conversion helpers for
struct bpf_prog_info_linear to simplify this.

This functionality is heavily tailored to perf's usecase, so its use as
a general prog info API should be deemphasized in favor of just calling
bpf_obj_get_info_by_fd, which can be more easily fit to purpose. Some
examples from caller migrations in this series:

  * Some callers weren't requesting or using dynamic-sized prog info and
    are well served by a simple get_info_by_fd call (e.g.
    dump_prog_id_as_func_ptr in bpftool)
  * Some callers were requesting all of a specific dynamic info type but
    only using the first record, so can avoid unnecessary malloc by
    only requesting 1 (e.g. profile_target_name in bpftool)
  * bpftool's do_dump saves some malloc/free by growing and reusing its
    dynamic prog_info buf as it loops over progs to grab info and dump.

Perf does need the full functionality of
bpf_program__get_prog_info_linear and its accompanying structs +
helpers, so copy the code to its codebase, migrate all other uses in the
tree, and deprecate the helper in libbpf.

Since the deprecated symbols continue to be included in perf some
renaming was necessary in perf's copy, otherwise functionality is
unchanged.

This work was previously discussed in libbpf's issue tracker [0].

[0]: https://github.com/libbpf/libbpf/issues/313

v2->v3:
  * Remove v2's patch 1 ("libbpf: Migrate internal use of
    bpf_program__get_prog_info_linear"), which was applied [Andrii]
  * Add new patch 1 migrating error checking of libbpf calls to
    new scheme [Andrii, Quentin]
  * In patch 2, fix != -1 error check of libbpf call, improper realloc
    handling, and get rid of confusing macros [Andrii]
  * In patch 4, deprecate starting from 0.6 instead of 0.7 [Andrii]

v1->v2: fix bpftool do_dump changes to clear bpf_prog_info after use and
correctly pass realloc'd ptr back (patch 2)
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

As part of the road to libbpf 1.0, and discussed in libbpf issue tracker
[0], bpf_program__get_prog_info_linear and its associated structs and
helper functions should be deprecated. The functionality is too specific
to the needs of 'perf', and there's little/no out-of-tree usage to
preclude introduction of a more general helper in the future.

  [0] Closes: https://github.com/libbpf/libbpf/issues/313Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-5-davemarchevsky@fb.com

To prepare for impending deprecation of libbpf's
bpf_program__get_prog_info_linear, pull in the function and associated
helpers into the perf codebase and migrate existing uses to the perf
copy.

Since libbpf's deprecated definitions will still be visible to perf, it
is necessary to rename perf's definitions.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-4-davemarchevsky@fb.com

To prepare for impending deprecation of libbpf's
bpf_program__get_prog_info_linear, migrate uses of this function to use
bpf_obj_get_info_by_fd.

Since the profile_target_name and dump_prog_id_as_func_ptr helpers were
only looking at the first func_info, avoid grabbing the rest to save a
malloc. For do_dump, add a more full-featured helper, but avoid
free/realloc of buffer when possible for multi-prog dumps.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-3-davemarchevsky@fb.com

Per [0], callers of libbpf functions with LIBBPF_STRICT_DIRECT_ERRS set
should handle negative error codes of various values (e.g. -EINVAL).
Migrate two callsites which were explicitly checking for -1 only to
handle the new scheme.

  [0]: https://github.com/libbpf/libbpf/wiki/Libbpf-1.0-migration-guide#direct-error-code-returning-libbpf_strict_direct_errsSigned-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211101224357.2651181-2-davemarchevsky@fb.com

Pull x86 core updates from Borislav Petkov:

 - Do not #GP on userspace use of CLI/STI but pretend it was a NOP to
   keep old userspace from breaking. Adjust the corresponding iopl
   selftest to that.

 - Improve stack overflow warnings to say which stack got overflowed and
   raise the exception stack sizes to 2 pages since overflowing the
   single page of exception stack is very easy to do nowadays with all
   the tracing machinery enabled. With that, rip out the custom mapping
   of AMD SEV's too.

 - A bunch of changes in preparation for FGKASLR like supporting more
   than 64K section headers in the relocs tool, correct ORC lookup table
   size to cover the whole kernel .text and other adjustments.

* tag 'x86_core_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage
  vmlinux.lds.h: Have ORC lookup cover entire _etext - _stext
  x86/boot/compressed: Avoid duplicate malloc() implementations
  x86/boot: Allow a "silent" kaslr random byte fetch
  x86/tools/relocs: Support >64K section headers
  x86/sev: Make the #VC exception stacks part of the default stacks storage
  x86: Increase exception stack sizes
  x86/mm/64: Improve stack overflow warnings
  x86/iopl: Fake iopl(3) CLI/STI usage

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...

This reverts commit f1a456f8.

  WARNING: CPU: 1 PID: 6819 at net/core/skbuff.c:5429 skb_try_coalesce+0x78b/0x7e0
  CPU: 1 PID: 6819 Comm: xxxxxxx Kdump: loaded Tainted: G S                5.15.0-04194-gd852503f7711 #16
  RIP: 0010:skb_try_coalesce+0x78b/0x7e0
  Code: e8 2a bf 41 ff 44 8b b3 bc 00 00 00 48 8b 7c 24 30 e8 19 c0 41 ff 44 89 f0 48 03 83 c0 00 00 00 48 89 44 24 40 e9 47 fb ff ff <0f> 0b e9 ca fc ff ff 4c 8d 70 ff 48 83 c0 07 48 89 44 24 38 e9 61
  RSP: 0018:ffff88881f449688 EFLAGS: 00010282
  RAX: 00000000fffffe96 RBX: ffff8881566e4460 RCX: ffffffff82079f7e
  RDX: 0000000000000003 RSI: dffffc0000000000 RDI: ffff8881566e47b0
  RBP: ffff8881566e46e0 R08: ffffed102619235d R09: ffffed102619235d
  R10: ffff888130c91ae3 R11: ffffed102619235c R12: ffff88881f4498a0
  R13: 0000000000000056 R14: 0000000000000009 R15: ffff888130c91ac0
  FS:  00007fec2cbb9700(0000) GS:ffff88881f440000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fec1b060d80 CR3: 00000003acf94005 CR4: 00000000003706e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   <IRQ>
   tcp_try_coalesce+0xeb/0x290
   ? tcp_parse_options+0x610/0x610
   ? mark_held_locks+0x79/0xa0
   tcp_queue_rcv+0x69/0x2f0
   tcp_rcv_established+0xa49/0xd40
   ? tcp_data_queue+0x18a0/0x18a0
   tcp_v6_do_rcv+0x1c9/0x880
   ? rt6_mtu_change_route+0x100/0x100
   tcp_v6_rcv+0x1624/0x1830
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull crypto updates from Herbert Xu:
 "API:

   - Delay boot-up self-test for built-in algorithms

  Algorithms:

   - Remove fallback path on arm64 as SIMD now runs with softirq off

  Drivers:

   - Add Keem Bay OCS ECC Driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits)
  crypto: testmgr - fix wrong key length for pkcs1pad
  crypto: pcrypt - Delay write to padata->info
  crypto: ccp - Make use of the helper macro kthread_run()
  crypto: sa2ul - Use the defined variable to clean code
  crypto: s5p-sss - Add error handling in s5p_aes_probe()
  crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver
  dt-bindings: crypto: Add Keem Bay ECC bindings
  crypto: ecc - Export additional helper functions
  crypto: ecc - Move ecc.h to include/crypto/internal
  crypto: engine - Add KPP Support to Crypto Engine
  crypto: api - Do not create test larvals if manager is disabled
  crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
  hwrng: s390 - replace snprintf in show functions with sysfs_emit
  crypto: octeontx2 - set assoclen in aead_do_fallback()
  crypto: ccp - Fix whitespace in sev_cmd_buffer_len()
  hwrng: mtk - Force runtime pm ops for sleep ops
  crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
  crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c
  crypto: qat - extract send and wait from adf_vf2pf_request_version()
  crypto: qat - add VF and PF wrappers to common send function
  ...

Pull audit updates from Paul Moore:
 "Add some additional audit logging to capture the openat2() syscall
  open_how struct info.

  Previous variations of the open()/openat() syscalls allowed audit
  admins to inspect the syscall args to get the information contained in
  the new open_how struct used in openat2()"

* tag 'audit-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: return early if the filter rule has a lower priority
  audit: add OPENAT2 record to list "how" info
  audit: add support for the openat2 syscall
  audit: replace magic audit syscall class numbers with macros
  lsm_audit: avoid overloading the "key" audit field
  audit: Convert to SPDX identifier
  audit: rename struct node to struct audit_node to prevent future name collisions

Pull selinux updates from Paul Moore:

 - Add LSM/SELinux/Smack controls and auditing for io-uring.

   As usual, the individual commit descriptions have more detail, but we
   were basically missing two things which we're adding here:

      + establishment of a proper audit context so that auditing of
        io-uring ops works similarly to how it does for syscalls (with
        some io-uring additions because io-uring ops are *not* syscalls)

      + additional LSM hooks to enable access control points for some of
        the more unusual io-uring features, e.g. credential overrides.

   The additional audit callouts and LSM hooks were done in conjunction
   with the io-uring folks, based on conversations and RFC patches
   earlier in the year.

 - Fixup the binder credential handling so that the proper credentials
   are used in the LSM hooks; the commit description and the code
   comment which is removed in these patches are helpful to understand
   the background and why this is the proper fix.

 - Enable SELinux genfscon policy support for securityfs, allowing
   improved SELinux filesystem labeling for other subsystems which make
   use of securityfs, e.g. IMA.

* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  security: Return xattr name from security_dentry_init_security()
  selinux: fix a sock regression in selinux_ip_postroute_compat()
  binder: use cred instead of task for getsecid
  binder: use cred instead of task for selinux checks
  binder: use euid from cred instead of using task
  LSM: Avoid warnings about potentially unused hook variables
  selinux: fix all of the W=1 build warnings
  selinux: make better use of the nf_hook_state passed to the NF hooks
  selinux: fix race condition when computing ocontext SIDs
  selinux: remove unneeded ipv6 hook wrappers
  selinux: remove the SELinux lockdown implementation
  selinux: enable genfscon labeling for securityfs
  Smack: Brutalist io_uring support
  selinux: add support for the io_uring access controls
  lsm,io_uring: add LSM hooks to io_uring
  io_uring: convert io_uring to the secure anon inode interface
  fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
  audit: add filtering for io_uring records
  audit,io_uring,io-wq: add some basic audit support to io_uring
  audit: prepare audit_context for use in calling contexts beyond syscalls

Pull RCU updates from Paul McKenney:

 - Miscellaneous fixes

 - Torture-test updates for smp_call_function(), most notably improved
   checking of module parameters.

 - Tasks-trace RCU updates that fix a number of rare but important
   race-condition bugs.

 - Other torture-test updates, most notably better checking of module
   parameters. In addition, rcutorture may once again be run on
   CONFIG_PREEMPT_RT kernels.

 - Torture-test scripting updates, most notably specifying the new
   CONFIG_KCSAN_STRICT kconfig option rather than maintaining an
   ever-changing list of individual KCSAN kconfig options.

* tag 'rcu.2021.11.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (46 commits)
  rcu: Fix rcu_dynticks_curr_cpu_in_eqs() vs noinstr
  rcu: Always inline rcu_dynticks_task*_{enter,exit}()
  torture: Make kvm-remote.sh print size of downloaded tarball
  torture: Allot 1G of memory for scftorture runs
  tools/rcu: Add an extract-stall script
  scftorture: Warn on individual scf_torture_init() error conditions
  scftorture: Count reschedule IPIs
  scftorture: Account for weight_resched when checking for all zeroes
  scftorture: Shut down if nonsensical arguments given
  scftorture: Allow zero weight to exclude an smp_call_function*() category
  rcu: Avoid unneeded function call in rcu_read_unlock()
  rcu-tasks: Update comments to cond_resched_tasks_rcu_qs()
  rcu-tasks: Fix IPI failure handling in trc_wait_for_one_reader
  rcu-tasks: Fix read-side primitives comment for call_rcu_tasks_trace
  rcu-tasks: Clarify read side section info for rcu_tasks_rude GP primitives
  rcu-tasks: Correct comparisons for CPU numbers in show_stalled_task_trace
  rcu-tasks: Correct firstreport usage in check_all_holdout_tasks_trace
  rcu-tasks: Fix s/rcu_add_holdout/trc_add_holdout/ typo in comment
  rcu-tasks: Move RTGS_WAIT_CBS to beginning of rcu_tasks_kthread() loop
  rcu-tasks: Fix s/instruction/instructions/ typo in comment
  ...