- 20 Apr, 2019 40 commits
-
-
Chao Yu authored
[ Upstream commit 7d20c8ab ] https://bugzilla.kernel.org/show_bug.cgi?id=200951 These is a NULL pointer dereference issue reported in bugzilla: Hi, in the setup there is a SATA SSD connected to a SATA-to-USB bridge. The disc is "Samsung SSD 850 PRO 256G" which supports TRIM. There are four partitions: sda1: FAT /boot sda2: F2FS / sda3: F2FS /home sda4: F2FS The bridge is ASMT1153e which uses the "uas" driver. There is no TRIM pass-through, so, when mounting it reports: mounting with "discard" option, but the device does not support discard The USB host is USB3.0 and UASP capable. It is the one on RK3399. Given this everything works fine, except there is no TRIM support. In order to enable TRIM a new UDEV rule is added [1]: /etc/udev/rules.d/10-sata-bridge-trim.rules: ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap" After reboot any F2FS write hangs forever and dmesg reports: Unable to handle kernel NULL pointer dereference Also tested on a x86_64 system: works fine even with TRIM enabled. same disc same bridge different usb host controller different cpu architecture not root filesystem Regards, Vicenç. [1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280 Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122 [000000000000003e] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1 Hardware name: Sapphire-RK3399 Board (DT) pstate: 00000005 (nzcv daif -PAN -UAO) pc : update_sit_entry+0x304/0x4b0 lr : update_sit_entry+0x108/0x4b0 sp : ffff00000ca13bd0 x29: ffff00000ca13bd0 x28: 000000000000003e x27: 0000000000000020 x26: 0000000000080000 x25: 0000000000000048 x24: ffff8000ebb85cf8 x23: 0000000000000253 x22: 00000000ffffffff x21: 00000000000535f2 x20: 00000000ffffffdf x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8 x17: 0000000007ce6926 x16: 000000001c83ffa8 x15: 0000000000000000 x14: ffff8000f602df90 x13: 0000000000000006 x12: 0000000000000040 x11: 0000000000000228 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 00000000000535f2 x6 : ffff8000ebff3440 x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8 x3 : 00000000ffffffff x2 : 0000000000000020 x1 : 0000000000000000 x0 : ffff8000eb9e5800 Process nvim (pid: 957, stack limit = 0x0000000063a78320) Call trace: update_sit_entry+0x304/0x4b0 f2fs_invalidate_blocks+0x98/0x140 truncate_node+0x90/0x400 f2fs_remove_inode_page+0xe8/0x340 f2fs_evict_inode+0x2b0/0x408 evict+0xe0/0x1e0 iput+0x160/0x260 do_unlinkat+0x214/0x298 __arm64_sys_unlinkat+0x3c/0x68 el0_svc_handler+0x94/0x118 el0_svc+0x8/0xc Code: f9400800 b9488400 36080140 f9400f01 (387c4820) ---[ end trace a0f21a307118c477 ]--- The reason is it is possible to enable discard flag on block queue via UDEV, but during mount, f2fs will initialize se->discard_map only if this flag is set, once the flag is set after mount, f2fs may dereference NULL pointer on se->discard_map. So this patch does below changes to fix this issue: - initialize and update se->discard_map all the time. - don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag during mount. - don't issue small discard on zoned block device. - introduce some functions to enhance the readability. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Tested-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Siva Rebbagondla authored
[ Upstream commit 4c62764d ] While running regressions, observed below kernel panic when sdio disconnect called. This is because of, kthread_stop() is taking care of wait_for_completion() by default. When wait_for_completion triggered in kthread_stop and as it was done already, giving kernel panic. Hence, removing redundant wait_for_completion() from rsi_kill_thread(). ... skipping ... BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a63df>] exit_creds+0x1f/0x50 PGD 0 Oops: 0002 [#1] SMP CPU: 0 PID: 6502 Comm: rmmod Tainted: G OE 4.15.9-Generic #154-Ubuntu Hardware name: Dell Inc. Edge Gateway 3003/ , BIOS 01.00.00 04/17/2017 Stack: ffff88007392e600 ffff880075847dc0 ffffffff8108160a 0000000000000000 ffff88007392e600 ffff880075847de8 ffffffff810a484b ffff880076127000 ffff88003cd3a800 ffff880074f12a00 ffff880075847e28 ffffffffc09bed15 Call Trace: [<ffffffff8108160a>] __put_task_struct+0x5a/0x140 [<ffffffff810a484b>] kthread_stop+0x10b/0x110 [<ffffffffc09bed15>] rsi_disconnect+0x2f5/0x300 [ven_rsi_sdio] [<ffffffff81578bcb>] ? __pm_runtime_resume+0x5b/0x80 [<ffffffff816f0918>] sdio_bus_remove+0x38/0x100 [<ffffffff8156cc64>] __device_release_driver+0xa4/0x150 [<ffffffff8156d7a5>] driver_detach+0xb5/0xc0 [<ffffffff8156c6c5>] bus_remove_driver+0x55/0xd0 [<ffffffff8156dfbc>] driver_unregister+0x2c/0x50 [<ffffffff816f0b8a>] sdio_unregister_driver+0x1a/0x20 [<ffffffffc09bf0f5>] rsi_module_exit+0x15/0x30 [ven_rsi_sdio] [<ffffffff8110cad8>] SyS_delete_module+0x1b8/0x210 [<ffffffff81851dc8>] entry_SYSCALL_64_fastpath+0x1c/0xbb Signed-off-by:
Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Robert Jarzmik authored
[ Upstream commit 9ce3ebe9 ] In the corner case where the gpio driver probe fails, for whatever reason, the suspend and resume handlers will still be called as they have to be registered as syscore operations. This applies as well when no probe was called while the driver has been built in the kernel. Nicolas tracked this in : https://bugzilla.kernel.org/show_bug.cgi?id=200905 Therefore, add a failsafe in these function, and test if a proper probe succeeded and the driver is functional. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Reported-by:
Nicolas Chauvet <kwizart@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
[ Upstream commit abf7b30d ] In the Cirrus driver, the regular clean-up code also performs the clean-up of a failed initialization. If the fbdev's framebuffer was not initialized, the clean-up will fail within drm_framebuffer_unregister_private. Booting with cirrus.bpp=16 triggers this bug. The framebuffer is currently stored directly within struct cirrus_fbdev. To fix the bug, we turn it into a pointer that is only set for initialized framebuffers. The fbdev's clean-up code skips uninitialized framebuffers. The memory for struct drm_framebuffer is allocated dynamically. This requires additional error handling within cirrusfb_create. The framebuffer clean-up is now performed by drm_framebuffer_put, which also frees the data strcuture's memory. Link: https://bugzilla.suse.com/show_bug.cgi?id=1101822Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20180720112743.27159-1-tzimmermann@suse.deSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Darrick J. Wong authored
[ Upstream commit 18915b58 ] The ext4 fstrim implementation uses the block bitmaps to find free space that can be discarded. If we haven't replayed the journal, the bitmaps will be stale and we absolutely *cannot* use stale metadata to zap the underlying storage. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Kairui Song authored
[ Upstream commit ffc8599a ] On machines where the GART aperture is mapped over physical RAM, /proc/kcore contains the GART aperture range. Accessing the GART range via /proc/kcore results in a kernel crash. vmcore used to have the same issue, until it was fixed with commit 2a3e83c6 ("x86/gart: Exclude GART aperture from vmcore")', leveraging existing hook infrastructure in vmcore to let /proc/vmcore return zeroes when attempting to read the aperture region, and so it won't read from the actual memory. Apply the same workaround for kcore. First implement the same hook infrastructure for kcore, then reuse the hook functions introduced in the previous vmcore fix. Just with some minor adjustment, rename some functions for more general usage, and simplify the hook infrastructure a bit as there is no module usage yet. Suggested-by:
Baoquan He <bhe@redhat.com> Signed-off-by:
Kairui Song <kasong@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Jiri Bohac <jbohac@suse.cz> Acked-by:
-
Steve French authored
[ Upstream commit 85f9987b ] It was mapped to EIO which can be confusing when user space queries for an object GUID for an object for which the server file system doesn't support (or hasn't saved one). As Amir Goldstein suggested this is similar to ENOATTR (equivalently ENODATA in Linux errno definitions) so changing NT STATUS code mapping for OBJECTID_NOT_FOUND to ENODATA. Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Amir Goldstein <amir73il@gmail.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit e898e69d ] When building with -Wsometimes-uninitialized, Clang warns: arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used uninitialized whenever switch default is taken [-Wsometimes-uninitialized] The default cannot be reached because arch_build_bp_info() initializes hw->len to one of the specified cases. Nevertheless the warning is valid and returning -EINVAL makes sure that this cannot be broken by future modifications. Suggested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Lu Baolu authored
[ Upstream commit 5bb71fc7 ] The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by:
Ashok Raj <ashok.raj@intel.com> Fixes: f8bab735 ("intel-iommu: PMEN support") Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 909e9c9c ] pm_runtime_get_sync returns negative on failure. Fixes: eaeb9010 ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Matthew Whitehead authored
[ Upstream commit 18fb053f ] There are comments in processor-cyrix.h advising you to _not_ make calls using the deprecated macros in this style: setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80); This is because it expands the macro into a non-functioning calling sequence. The calling order must be: outb(CX86_CCR2, 0x22); inb(0x23); From the comments: * When using the old macros a line like * setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88); * gets expanded to: * do { * outb((CX86_CCR2), 0x22); * outb((({ * outb((CX86_CCR2), 0x22); * inb(0x23); * }) | 0x88), 0x23); * } while (0); The new macros fix this problem, so use them instead. Tested on an actual Geode processor. Signed-off-by:
Matthew Whitehead <tedheadster@gmail.com> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 534c89c2 ] The page allocation in hv_cpu_init() can fail, but the code does not have a check for that. Add a check and return -ENOMEM when the allocation fails. [ tglx: Massaged changelog ] Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org> Acked-by:
"K. Y. Srinivasan" <kys@microsoft.com> Cc: pakki001@umn.edu Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sasha Levin <sashal@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: linux-hyperv@vger.kernel.org Link: https://lkml.kernel.org/r/20190314054651.1315-1-kjlu@umn.eduSigned-off-by:
-
Aditya Pakki authored
[ Upstream commit 2e84f116 ] hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks a check. Add a check to prevent NULL pointer dereference. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Jianguo Chen authored
[ Upstream commit fca269f2 ] mbigen_write_msg clears eventid bits of a mbigen register when free a interrupt, because msi_domain_deactivate memset struct msg to zero. Then multiple mbigen pins with zero eventid will report the same interrupt number. The eventid clear call trace: free_irq __free_irq irq_shutdown irq_domain_deactivate_irq __irq_domain_deactivate_irq __irq_domain_deactivate_irq msi_domain_deactivate platform_msi_write_msg mbigen_write_msg Signed-off-by:
Jianguo Chen <chenjianguo3@huawei.com> [maz: massaged subject] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Fabien Dessenne authored
[ Upstream commit 0dda0966 ] Falling and rising configuration and status registers are not banked. As they are shared with M4 co-processor, they should not be cleared at probe time, else M4 co-processor configuration will be lost. Fixes: f9fc1745 ("irqchip/stm32: Add host and driver data structures") Signed-off-by:
Loic Pallardy <loic.pallardy@st.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
-
Andrzej Hajda authored
[ Upstream commit 6a3b45ad ] MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4 to update internal state (shadow registers). Apparently the driver implements it incorrectly. The rule should be as follows: - do not request updating registers until previous request was finished, ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0. - before setting registers synchronisation on VSYNC should be turned off, ie. MXR_STATUS_SYNC_ENABLE should be reset, - after finishing MXR_STATUS_SYNC_ENABLE should be set again. The patch hopefully implements it correctly. Below sample kernel log from page fault caused by the bug: [ 25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800 [ 25.677888] ------------[ cut here ]------------ [ 25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450! [ 25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 25.693778] Modules linked in: [ 25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136 [ 25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264 [ 25.716470] LR is at lock_is_held_type+0x44/0x64 v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync Reported-by:
Marian Mihailescu <mihailescu2m@gmail.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit 373e915c ] This patch avoids that the following warning is reported when building with W=1: block/blk-iolatency.c:734:5: warning: no previous prototype for 'blk_iolatency_init' [-Wmissing-prototypes] Cc: Josef Bacik <jbacik@fb.com> Fixes: d7067512 ("block: introduce blk-iolatency io controller") # v4.19 Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jiada Wang authored
[ Upstream commit 2071ac98 ] Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by:
Jiada Wang <jiada_wang@mentor.com> Reviewed-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Andy Shevchenko authored
[ Upstream commit 54e3aca8 ] When commit 8661423e ("ACPI / utils: Add new acpi_dev_present helper") introduced acpi_dev_present(), it missed the fact that bus_find_device() took a reference on the device found by it and the callers of acpi_dev_present() don't drop that reference. Drop the reference on the device in acpi_dev_present(). Fixes: 8661423e ("ACPI / utils: Add new acpi_dev_present helper") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Changbin Du authored
[ Upstream commit d982b331 ] ================================================================= ==20875==ERROR: LeakSanitizer: detected memory leaks Direct leak of 1160 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc84138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x55bd50005599 in zalloc util/util.h:23 #2 0x55bd500068f5 in perf_evsel__newtp_idx util/evsel.c:327 #3 0x55bd4ff810fc in perf_evsel__newtp /home/work/linux/tools/perf/util/evsel.h:216 #4 0x55bd4ff81608 in test__perf_evsel__tp_sched_test tests/evsel-tp-sched.c:69 #5 0x55bd4ff528e6 in run_test tests/builtin-test.c:358 #6 0x55bd4ff52baf in test_and_print tests/builtin-test.c:388 #7 0x55bd4ff543fe in __cmd_test tests/builtin-test.c:583 #8 0x55bd4ff5572f in cmd_test tests/builtin-test.c:722 #9 0x55bd4ffc4087 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #10 0x55bd4ffc45c6 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #11 0x55bd4ffc49ca in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #12 0x55bd4ffc5138 in main /home/changbin/work/linux/tools/perf/perf.c:520 #13 0x7f1b6e34809a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 19 byte(s) in 1 object(s) allocated from: #0 0x7f1b6fc83f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x7f1b6e3ac30f in vasprintf (/lib/x86_64-linux-gnu/libc.so.6+0x8830f) Signed-off-by:
Changbin Du <changbin.du@gmail.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Fixes: 6a6cd11d ("perf test: Add test for the sched tracepoint format fields") Link: http://lkml.kernel.org/r/20190316080556.3075-17-changbin.du@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Changbin Du authored
[ Upstream commit f97a8991 ] ================================================================= ==7506==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13 byte(s) in 3 object(s) allocated from: #0 0x7f03339d6070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x5625e53aaef0 in expr__find_other util/expr.y:221 #2 0x5625e51bcd3f in test__expr tests/expr.c:52 #3 0x5625e51528e6 in run_test tests/builtin-test.c:358 #4 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #5 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #6 0x5625e515572f in cmd_test tests/builtin-test.c:722 #7 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #8 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #9 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #10 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #11 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
Changbin Du authored
[ Upstream commit 93faa52e ] ================================================================= ==7497==ERROR: LeakSanitizer: detected memory leaks Direct leak of 40 byte(s) in 1 object(s) allocated from: #0 0x7f0333a88f30 in __interceptor_malloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xedf30) #1 0x5625e5326213 in cpu_map__trim_new util/cpumap.c:45 #2 0x5625e5326703 in cpu_map__read util/cpumap.c:103 #3 0x5625e53267ef in cpu_map__read_all_cpu_map util/cpumap.c:120 #4 0x5625e5326915 in cpu_map__new util/cpumap.c:135 #5 0x5625e517b355 in test__openat_syscall_event_on_all_cpus tests/openat-syscall-all-cpus.c:36 #6 0x5625e51528e6 in run_test tests/builtin-test.c:358 #7 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #8 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #9 0x5625e515572f in cmd_test tests/builtin-test.c:722 #10 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #11 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #12 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #13 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #14 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 42dfa451 ] Using gcc's ASan, Changbin reports: ================================================================= ==7494==ERROR: LeakSanitizer: detected memory leaks Direct leak of 48 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e5330a5e in zalloc util/util.h:23 #2 0x5625e5330a9b in perf_counts__new util/counts.c:10 #3 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #4 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #5 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #6 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #7 0x5625e51528e6 in run_test tests/builtin-test.c:358 #8 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #9 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #10 0x5625e515572f in cmd_test tests/builtin-test.c:722 #11 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #12 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #13 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #14 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #15 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Indirect leak of 72 byte(s) in 1 object(s) allocated from: #0 0x7f0333a89138 in calloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee138) #1 0x5625e532560d in zalloc util/util.h:23 #2 0x5625e532566b in xyarray__new util/xyarray.c:10 #3 0x5625e5330aba in perf_counts__new util/counts.c:15 #4 0x5625e5330ca0 in perf_evsel__alloc_counts util/counts.c:47 #5 0x5625e520d8e5 in __perf_evsel__read_on_cpu util/evsel.c:1505 #6 0x5625e517a985 in perf_evsel__read_on_cpu /home/work/linux/tools/perf/util/evsel.h:347 #7 0x5625e517ad1a in test__openat_syscall_event tests/openat-syscall.c:47 #8 0x5625e51528e6 in run_test tests/builtin-test.c:358 #9 0x5625e5152baf in test_and_print tests/builtin-test.c:388 #10 0x5625e51543fe in __cmd_test tests/builtin-test.c:583 #11 0x5625e515572f in cmd_test tests/builtin-test.c:722 #12 0x5625e51c3fb8 in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #13 0x5625e51c44f7 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #14 0x5625e51c48fb in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #15 0x5625e51c5069 in main /home/changbin/work/linux/tools/perf/perf.c:520 #16 0x7f033214d09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) His patch took care of evsel->prev_raw_counts, but the above backtraces are about evsel->counts, so fix that instead. Reported-by:
-
Changbin Du authored
[ Upstream commit cb6186ae ] We need to map__put() before returning from failure of sample__resolve_callchain(). Detected with gcc's ASan. Signed-off-by:
-
Changbin Du authored
[ Upstream commit 70c819e4 ] We should go to the cleanup path, to avoid leaks, detected using gcc's ASan. Signed-off-by:
-
Changbin Du authored
[ Upstream commit 8bde8516 ] Detected with gcc's ASan: Direct leak of 4356 byte(s) in 120 object(s) allocated from: #0 0x7ff1a2b5a070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x55719aef4814 in build_id_cache__origname util/build-id.c:215 #2 0x55719af649b6 in print_sdt_events util/parse-events.c:2339 #3 0x55719af66272 in print_events util/parse-events.c:2542 #4 0x55719ad1ecaa in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 #5 0x55719aec745d in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 #6 0x55719aec7d1a in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 #7 0x55719aec8184 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 #8 0x55719aeca41a in main /home/changbin/work/linux/tools/perf/perf.c:520 #9 0x7ff1a07ae09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
Changbin Du authored
[ Upstream commit 54569ba4 ] Detected with gcc's ASan: Direct leak of 66 byte(s) in 5 object(s) allocated from: #0 0x7ff3b1f32070 in __interceptor_strdup (/usr/lib/x86_64-linux-gnu/libasan.so.5+0x3b070) #1 0x560c8761034d in collect_config util/config.c:597 #2 0x560c8760d9cb in get_value util/config.c:169 #3 0x560c8760dfd7 in perf_parse_file util/config.c:285 #4 0x560c8760e0d2 in perf_config_from_file util/config.c:476 #5 0x560c876108fd in perf_config_set__init util/config.c:661 #6 0x560c87610c72 in perf_config_set__new util/config.c:709 #7 0x560c87610d2f in perf_config__init util/config.c:718 #8 0x560c87610e5d in perf_config util/config.c:730 #9 0x560c875ddea0 in main /home/changbin/work/linux/tools/perf/perf.c:442 #10 0x7ff3afb8609a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
Changbin Du authored
[ Upstream commit 9b40dff7 ] The option 'sort-order' should be 'sort_order'. Signed-off-by:
-
Changbin Du authored
[ Upstream commit 39df730b ] Detected via gcc's ASan: Direct leak of 2048 byte(s) in 64 object(s) allocated from: 6 #0 0x7f606512e370 in __interceptor_realloc (/usr/lib/x86_64-linux-gnu/libasan.so.5+0xee370) 7 #1 0x556b0f1d7ddd in thread_map__realloc util/thread_map.c:43 8 #2 0x556b0f1d84c7 in thread_map__new_by_tid util/thread_map.c:85 9 #3 0x556b0f0e045e in is_event_supported util/parse-events.c:2250 10 #4 0x556b0f0e1aa1 in print_hwcache_events util/parse-events.c:2382 11 #5 0x556b0f0e3231 in print_events util/parse-events.c:2514 12 #6 0x556b0ee0a66e in cmd_list /home/changbin/work/linux/tools/perf/builtin-list.c:58 13 #7 0x556b0f01e0ae in run_builtin /home/changbin/work/linux/tools/perf/perf.c:302 14 #8 0x556b0f01e859 in handle_internal_command /home/changbin/work/linux/tools/perf/perf.c:354 15 #9 0x556b0f01edc8 in run_argv /home/changbin/work/linux/tools/perf/perf.c:398 16 #10 0x556b0f01f71f in main /home/changbin/work/linux/tools/perf/perf.c:520 17 #11 0x7f6062ccf09a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2409a) Signed-off-by:
-
David Arcari authored
[ Upstream commit 2a954966 ] turbostat failed to return a non-zero exit status even though the supplied command (turbostat <command>) failed. Currently when turbostat forks a command it returns zero instead of the actual exit status of the command. Modify the code to return the exit status. Signed-off-by:
David Arcari <darcari@redhat.com> Acked-by:
Len Brown <len.brown@intel.com> Signed-off-by:
-
Matteo Croce authored
[ Upstream commit a3151724 ] Since commit: ad67b74d ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of actual addresses: found SMP MP-table at [mem 0x000f5cc0-0x000f5ccf] mapped at [(____ptrval____)] Instead of changing the print to "%px", and leaking a kernel addresses, just remove the print completely, like in: 071929db ("arm64: Stop printing the virtual memory layout"). Signed-off-by:
Matteo Croce <mcroce@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 4c47acd8 ] Add limit into sscanf format string for on-stack buffer. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 0d593634 ("sched: Implement interface for cgroup unified hierarchy") Link: https://lkml.kernel.org/r/155189230232.2620.13120481613524200065.stgit@buzzSigned-off-by:
-
Peter Zijlstra authored
[ Upstream commit a23314e9 ] Vincent Wang reported that get_next_freq() has a mult overflow bug on 32-bit platforms in the IOWAIT boost case, since in that case {util,max} are in freq units instead of capacity units. Solve this by moving the IOWAIT boost to capacity units. And since this means @max is constant; simplify the code. Reported-by:
Vincent Wang <vincent.wang@unisoc.com> Tested-by:
-
Maurizio Lombardi authored
[ Upstream commit 165aa2bf ] In some cases, the iscsi_remove_session() function is called while an unbind_work operation is still running. This may cause a situation where sysfs objects are removed in an incorrect order, triggering a kernel warning. [ 605.249442] ------------[ cut here ]------------ [ 605.259180] sysfs group 'power' not found for kobject 'target2:0:0' [ 605.321371] WARNING: CPU: 1 PID: 26794 at fs/sysfs/group.c:235 sysfs_remove_group+0x76/0x80 [ 605.341266] Modules linked in: dm_service_time target_core_user target_core_pscsi target_core_file target_core_iblock iscsi_target_mod target_core_mod nls_utf8 isofs ppdev bochs_drm nfit ttm libnvdimm drm_kms_helper syscopyarea sysfillrect sysimgblt joydev pcspkr fb_sys_fops drm i2c_piix4 sg parport_pc parport xfs libcrc32c dm_multipath sr_mod sd_mod cdrom ata_generic 8021q garp mrp ata_piix stp crct10dif_pclmul crc32_pclmul llc libata crc32c_intel virtio_net net_failover ghash_clmulni_intel serio_raw failover sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi [ 605.627479] CPU: 1 PID: 26794 Comm: kworker/u32:2 Not tainted 4.18.0-60.el8.x86_64 #1 [ 605.721401] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014 [ 605.823651] Workqueue: scsi_wq_2 __iscsi_unbind_session [scsi_transport_iscsi] [ 605.830940] RIP: 0010:sysfs_remove_group+0x76/0x80 [ 605.922907] Code: 48 89 df 5b 5d 41 5c e9 38 c4 ff ff 48 89 df e8 e0 bf ff ff eb cb 49 8b 14 24 48 8b 75 00 48 c7 c7 38 73 cb a7 e8 24 77 d7 ff <0f> 0b 5b 5d 41 5c c3 0f 1f 00 0f 1f 44 00 00 41 56 41 55 41 54 55 [ 606.122304] RSP: 0018:ffffbadcc8d1bda8 EFLAGS: 00010286 [ 606.218492] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 606.326381] RDX: ffff98bdfe85eb40 RSI: ffff98bdfe856818 RDI: ffff98bdfe856818 [ 606.514498] RBP: ffffffffa7ab73e0 R08: 0000000000000268 R09: 0000000000000007 [ 606.529469] R10: 0000000000000000 R11: ffffffffa860d9ad R12: ffff98bdf978e838 [ 606.630535] R13: ffff98bdc2cd4010 R14: ffff98bdc2cd3ff0 R15: ffff98bdc2cd4000 [ 606.824707] FS: 0000000000000000(0000) GS:ffff98bdfe840000(0000) knlGS:0000000000000000 [ 607.018333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 607.117844] CR2: 00007f84b78ac024 CR3: 000000002c00a003 CR4: 00000000003606e0 [ 607.117844] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 607.420926] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 607.524236] Call Trace: [ 607.530591] device_del+0x56/0x350 [ 607.624393] ? ata_tlink_match+0x30/0x30 [libata] [ 607.727805] ? attribute_container_device_trigger+0xb4/0xf0 [ 607.829911] scsi_target_reap_ref_release+0x39/0x50 [ 607.928572] scsi_remove_target+0x1a2/0x1d0 [ 608.017350] __iscsi_unbind_session+0xb3/0x160 [scsi_transport_iscsi] [ 608.117435] process_one_work+0x1a7/0x360 [ 608.132917] worker_thread+0x30/0x390 [ 608.222900] ? pwq_unbound_release_workfn+0xd0/0xd0 [ 608.323989] kthread+0x112/0x130 [ 608.418318] ? kthread_bind+0x30/0x30 [ 608.513821] ret_from_fork+0x35/0x40 [ 608.613909] ---[ end trace 0b98c310c8a6138c ]--- Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Zhang Rui authored
[ Upstream commit e925b5be ] kthread name only allows 15 characters (TASK_COMMON_LEN is 16). Thus rename the kthreads created by intel_powerclamp driver from "kidle_inject/ + decimal cpuid" to "kidle_inj/ + decimal cpuid" to avoid truncated kthead name for cpu 100 and later. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Matthew Garrett authored
[ Upstream commit 396ee4d0 ] int3400 only pushes the UUID into the firmware when the mode is flipped to "enable". The current code only exposes the mode flag if the firmware supports the PASSIVE_1 UUID, which not all machines do. Remove the restriction. Signed-off-by:
Matthew Garrett <mjg59@google.com> Signed-off-by:
-
Matthew Garrett authored
[ Upstream commit 16fc8eca ] Add more supported DPTF policies than the driver currently exposes. Signed-off-by:
-
Phil Elwell authored
[ Upstream commit 35122495 ] "cat /sys/kernel/debug/bcm2835_thermal/regset" causes a NULL pointer dereference in bcm2835_thermal_debugfs. The driver makes use of the implementation details of the thermal framework to retrieve a pointer to its private data from a struct thermal_zone_device, and gets it wrong - leading to the crash. Instead, store its private data as the drvdata and retrieve the thermal_zone_device pointer from it. Fixes: bcb7dd9e ("thermal: bcm2835: add thermal driver for bcm2835 SoC") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 3b5236cc ] Merge commit 19785cf9 ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") broke the code introduced by commit ffe6e16f ("thermal: exynos: Reduce severity of too early temperature read"). Restore the original code from the mentioned commit to finally fix the warning message during boot: thermal thermal_zone0: failed to read out thermal zone (-22) Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 19785cf9 ("Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal") Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Luc Van Oostenryck authored
[ Upstream commit aa36e361 ] This variable is declared as: static struct powerclamp_worker_data * __percpu worker_data; In other words, a percpu pointer to struct ... But this variable not used like so but as a pointer to a percpu struct powerclamp_worker_data. So fix the declaration as: static struct powerclamp_worker_data __percpu *worker_data; This also quiets Sparse's warnings from __verify_pcpu_ptr(), like: 494:49: warning: incorrect type in initializer (different address spaces) 494:49: expected void const [noderef] <asn:3> *__vpp_verify 494:49: got struct powerclamp_worker_data * Signed-off-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
-
