- 05 Apr, 2019 40 commits
-
-
Jérôme de Bretagne authored
[ Upstream commit e97a3456 ] Power button suspend for some Dell models was added in: commit 821b8536 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275") by checking against the power button press notification (0xCE) to report the power button press event. The corresponding power button release notification (0xCF) was caught and ignored to stop it from being reported as an "unknown event" in the logs. The missing button release event is creating issues on Android-x86, as reported on the project mailing list for a Dell Latitude 5175 model, since the events are expected in down/up pairs. Report the power button release event to fix this issue. Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9RoTested-by:
Tristian Celestin <tristian.celestin@outlook.com> Tested-by:
Jérôme de Bretagne <jerome.debretagne@gmail.com> Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> [dvhart: corrected commit reference format per checkpatch] Signed-off-by:
Darren Hart (VMware) <dvhart@infradead.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roger Quadros authored
[ Upstream commit 169e3b68 ] On v3.10a in dual-role mode, if port is in device mode and gadget driver isn't loaded, the OTG event interrupts don't come through. It seems that if the core is configured to be OTG2.0 only, then we can't leave the DCFG.DEVSPD at Super-speed (default) if we expect OTG to work properly. It must be set to High-speed. Fix this issue by configuring DCFG.DEVSPD to the supported maximum speed at gadget init. Device tree still needs to provide correct supported maximum speed for this to work. This issue wasn't present on v2.40a but is seen on v3.10a. It doesn't cause any side effects on v2.40a. Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit b2e9e1c8 ] Duende Classic was produced by Solid State Logic in 2006, as a first model of Duende DSP series. The following model, Duende Mini was produced in 2008. They are designed to receive isochronous packets for PCM frames via IEEE 1394 bus, perform signal processing by downloaded program, then transfer isochronous packets for converted PCM frames. These two models includes the same embedded board, consists of several ICs below: - Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus - WaveFront semiconductor, DICE II STD ASIC for link/protocol layer - Altera MAX 3000A CPLD for programs - Analog devices, SHARC ADSP-21363 for signal processing (4 chips) This commit adds support for the two models to ALSA dice driver. Like support for the other devices, packet streaming is just available. Userspace applications should be developed if full features became available; e.g. program uploader and parameter controller. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 349771402425, 'cmc': True, 'cyc_clk_acc': 255, 'generation': 1, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 20674, 'pmc': False}, 'root-directory': [ ['VENDOR', 20674], ['DESCRIPTOR', 'Solid State Logic'], ['MODEL', 112], ['DESCRIPTOR', 'Duende board'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': True}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 20674], ['VERSION', 1], ['MODEL', 112], ['DESCRIPTOR', 'Duende board']]]]} Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 428da2bd ] [Why] In order to read CRC events when CRC capture is enabled the vblank interrput handler needs to be running for the CRTC. The handler is enabled while there is an active vblank reference. When running IGT tests there will often be no active vblank reference but the test expects to read a CRC value. This is valid usage (and works on i915 since they have a CRC interrupt handler) so the reference to the vblank should be grabbed while capture is active. This issue was found running: igt@kms_plane_multiple@atomic-pipe-b-tiling-none The pipe-b is the only one in the initial commit and was not previously active so no vblank reference is grabbed. The vblank interrupt is not enabled and the test times out. [How] Keep a reference to the vblank as long as CRC capture is enabled. If userspace never explicitly disables it then the reference is also dropped when removing the CRTC from the context (stream = NULL). Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Harry Wentland <Harry.Wentland@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Nathan Fontenot authored
[ Upstream commit 81b61324 ] On pseries systems, performing a partition migration can result in altering the nodes a CPU is assigned to on the destination system. For exampl, pre-migration on the source system CPUs are in node 1 and 3, post-migration on the destination system CPUs are in nodes 2 and 3. Handling the node change for a CPU can cause corruption in the slab cache if we hit a timing where a CPUs node is changed while cache_reap() is invoked. The corruption occurs because the slab cache code appears to rely on the CPU and slab cache pages being on the same node. The current dynamic updating of a CPUs node done in arch/powerpc/mm/numa.c does not prevent us from hitting this scenario. Changing the device tree property update notification handler that recognizes an affinity change for a CPU to do a full DLPAR remove and add of the CPU instead of dynamically changing its node resolves this issue. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Michael W. Bringmann <mwb@linux.vnet.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Manfred Schlaegl authored
[ Upstream commit 7ab57b76 ] We increase the default limit for buffer memory allocation by a factor of 10 to 640K to prevent data loss when using fast serial interfaces. For example when using RS485 without flow-control at speeds of 1Mbit/s an upwards we've run into problems such as applications being too slow to read out this buffer (on embedded devices based on imx53 or imx6). If you want to write transmitted data to a slow SD card and thus have realtime requirements, this limit can become a problem. That shouldn't be the case and 640K buffers fix such problems for us. This value is a maximum limit for allocation only. It has no effect on systems that currently run fine. When transmission is slow enough applications and hardware can keep up and increasing this limit doesn't change anything. It only _allows_ to allocate more than 2*64K in cases we currently fail to allocate memory despite having some. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit cec2b188 ] gpiod_get_value() gives out a warning if access to the underlying gpiochip requires sleeping, which is common for I2C based chips: WARNING: CPU: 0 PID: 77 at drivers/gpio/gpiolib.c:2500 gpiod_get_value+0xd0/0x100 Modules linked in: CPU: 0 PID: 77 Comm: kworker/0:2 Not tainted 4.14.0-rc3-00589-gf32897915d48-dirty #90 Hardware name: Allwinner sun4i/sun5i Families Workqueue: events deferred_probe_work_func [<c010ec50>] (unwind_backtrace) from [<c010b784>] (show_stack+0x10/0x14) [<c010b784>] (show_stack) from [<c0797224>] (dump_stack+0x88/0x9c) [<c0797224>] (dump_stack) from [<c0125b08>] (__warn+0xe8/0x100) [<c0125b08>] (__warn) from [<c0125bd0>] (warn_slowpath_null+0x20/0x28) [<c0125bd0>] (warn_slowpath_null) from [<c037069c>] (gpiod_get_value+0xd0/0x100) [<c037069c>] (gpiod_get_value) from [<c03778d0>] (pwm_backlight_probe+0x238/0x508) [<c03778d0>] (pwm_backlight_probe) from [<c0411a2c>] (platform_drv_probe+0x50/0xac) [<c0411a2c>] (platform_drv_probe) from [<c0410224>] (driver_probe_device+0x238/0x2e8) [<c0410224>] (driver_probe_device) from [<c040e820>] (bus_for_each_drv+0x44/0x94) [<c040e820>] (bus_for_each_drv) from [<c040ff0c>] (__device_attach+0xb0/0x114) [<c040ff0c>] (__device_attach) from [<c040f4f8>] (bus_probe_device+0x84/0x8c) [<c040f4f8>] (bus_probe_device) from [<c040f944>] (deferred_probe_work_func+0x50/0x14c) [<c040f944>] (deferred_probe_work_func) from [<c013be84>] (process_one_work+0x1ec/0x414) [<c013be84>] (process_one_work) from [<c013ce5c>] (worker_thread+0x2b0/0x5a0) [<c013ce5c>] (worker_thread) from [<c0141908>] (kthread+0x14c/0x154) [<c0141908>] (kthread) from [<c0107ab0>] (ret_from_fork+0x14/0x24) This was missed in commit 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep"). The code was then moved to a separate function in commit 7613c922 ("backlight: pwm_bl: Move the checks for initial power state to a separate function"). The only usage of gpiod_get_value() is during the probe stage, which is safe to sleep in. Switch to gpiod_get_value_cansleep(). Fixes: 0c9501f8 ("backlight: pwm_bl: Handle gpio that can sleep") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Oleg Nesterov authored
[ Upstream commit 51bee5ab ] The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which needs pids_free() to uncharge the pid. However, ->free() is called from __put_task_struct()->cgroup_free() and this is too late. Even the trivial program which does for (;;) { int pid = fork(); assert(pid >= 0); if (pid) wait(NULL); else exit(0); } can run out of limits because release_task()->call_rcu(delayed_put_task_struct) implies an RCU gp after the task/pid goes away and before the final put(). Test-case: mkdir -p /tmp/CG mount -t cgroup2 none /tmp/CG echo '+pids' > /tmp/CG/cgroup.subtree_control mkdir /tmp/CG/PID echo 2 > /tmp/CG/PID/pids.max perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' & echo $! > /tmp/CG/PID/cgroup.procs Without this patch the forking process fails soon after migration. Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite into the new helper, cgroup_release(), called by release_task() which actually frees the pid(s). Reported-by:
Herton R. Krzesinski <hkrzesin@redhat.com> Reported-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Nicolai Stange authored
[ Upstream commit eddd0b33 ] The ppc64 specific implementation of the reliable stacktracer, save_stack_trace_tsk_reliable(), bails out and reports an "unreliable trace" whenever it finds an exception frame on the stack. Stack frames are classified as exception frames if the STACK_FRAME_REGS_MARKER magic, as written by exception prologues, is found at a particular location. However, as observed by Joe Lawrence, it is possible in practice that non-exception stack frames can alias with prior exception frames and thus, that the reliable stacktracer can find a stale STACK_FRAME_REGS_MARKER on the stack. It in turn falsely reports an unreliable stacktrace and blocks any live patching transition to finish. Said condition lasts until the stack frame is overwritten/initialized by function call or other means. In principle, we could mitigate this by making the exception frame classification condition in save_stack_trace_tsk_reliable() stronger: in addition to testing for STACK_FRAME_REGS_MARKER, we could also take into account that for all exceptions executing on the kernel stack - their stack frames's backlink pointers always match what is saved in their pt_regs instance's ->gpr[1] slot and that - their exception frame size equals STACK_INT_FRAME_SIZE, a value uncommonly large for non-exception frames. However, while these are currently true, relying on them would make the reliable stacktrace implementation more sensitive towards future changes in the exception entry code. Note that false negatives, i.e. not detecting exception frames, would silently break the live patching consistency model. Furthermore, certain other places (diagnostic stacktraces, perf, xmon) rely on STACK_FRAME_REGS_MARKER as well. Make the exception exit code clear the on-stack STACK_FRAME_REGS_MARKER for those exceptions running on the "normal" kernel stack and returning to kernelspace: because the topmost frame is ignored by the reliable stack tracer anyway, returns to userspace don't need to take care of clearing the marker. Furthermore, as I don't have the ability to test this on Book 3E or 32 bits, limit the change to Book 3S and 64 bits. Fixes: df78d3f6 ("powerpc/livepatch: Implement reliable stack tracing for the consistency model") Reported-by:
Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by:
Nicolai Stange <nstange@suse.de> Signed-off-by:
-
Stanislav Fomichev authored
[ Upstream commit 8184d44c ] Use recently introduced bpf_probe_prog_type() to skip tests in the test_verifier() if bpf_verify_program() fails. The skipped test is indicated in the output. Example: ... 679/p bpf_get_stack return R0 within range SKIP (unsupported program type 5) 680/p ld_abs: invalid op 1 OK ... Summary: 863 PASSED, 165 SKIPPED, 3 FAILED Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Valdis Kletnieks authored
[ Upstream commit 116bfa96 ] Compiling with W=1 generates warnings: CC kernel/bpf/core.o kernel/bpf/core.c:721:12: warning: no previous prototype for ?bpf_jit_alloc_exec_limit? [-Wmissing-prototypes] 721 | u64 __weak bpf_jit_alloc_exec_limit(void) | ^~~~~~~~~~~~~~~~~~~~~~~~ kernel/bpf/core.c:757:14: warning: no previous prototype for ?bpf_jit_alloc_exec? [-Wmissing-prototypes] 757 | void *__weak bpf_jit_alloc_exec(unsigned long size) | ^~~~~~~~~~~~~~~~~~ kernel/bpf/core.c:762:13: warning: no previous prototype for ?bpf_jit_free_exec? [-Wmissing-prototypes] 762 | void __weak bpf_jit_free_exec(void *addr) | ^~~~~~~~~~~~~~~~~ All three are weak functions that archs can override, provide proper prototypes for when a new arch provides their own. Signed-off-by:
Valdis Kletnieks <valdis.kletnieks@vt.edu> Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Paolo Valente authored
[ Upstream commit 058fdecc ] When a new I/O request arrives for a bfq_queue, say Q, bfq checks whether that request is close to (a) the head request of some other queue waiting to be served, or (b) the last request dispatched for the in-service queue (in case Q itself is not the in-service queue) If a queue, say Q2, is found for which the above condition holds, then bfq merges Q and Q2, to hopefully get a more sequential I/O in the resulting merged queue, and thus a possibly higher throughput. Case (b) is checked by comparing the new request for Q with the last request dispatched, assuming that the latter necessarily belonged to the in-service queue. Unfortunately, this assumption is no longer always correct, since commit d0edc247 ("block, bfq: inject other-queue I/O into seeky idle queues on NCQ flash"). When the assumption does not hold, queues that must not be merged may be merged, causing unexpected loss of control on per-queue service guarantees. This commit solves this problem by adding an extra field, which stores the actual last request dispatched for the in-service queue, and by using this new field to correctly check case (b). Signed-off-by:
Paolo Valente <paolo.valente@linaro.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Russell King authored
[ Upstream commit 5388a5b8 ] machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Vladimir Murzin authored
[ Upstream commit 72cd4064 ] ARMv8M introduces support for Security extension to M class, among other things it affects exception handling, especially, encoding of EXC_RETURN. The new bits have been added: Bit [6] Secure or Non-secure stack Bit [5] Default callee register stacking Bit [0] Exception Secure which conflicts with hard-coded value of EXC_RETURN: In fact, we only care of few bits: Bit [3] Mode (0 - Handler, 1 - Thread) Bit [2] Stack pointer selection (0 - Main, 1 - Process) We can toggle only those bits and left other bits as they were on exception entry. It is basically, what patch does - saves EXC_RETURN when we do transition form Thread to Handler mode (it is first svc), so later saved value is used instead of EXC_RET_THREADMODE_PROCESSSTACK. Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Stanislaw Gruszka authored
[ Upstream commit 3bd1505f ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by:
Michael <ZeroBeat@gmx.de> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 8cd09a3d ] If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 4e46c2a9 ] The UEFI spec revision 2.7 errata A section 8.4 has the following to say about the virtual memory runtime services: "This section contains function definitions for the virtual memory support that may be optionally used by an operating system at runtime. If an operating system chooses to make EFI runtime service calls in a virtual addressing mode instead of the flat physical mode, then the operating system must use the services in this section to switch the EFI runtime services from flat physical addressing to virtual addressing." So it is pretty clear that calling SetVirtualAddressMap() is entirely optional, and so there is no point in doing so unless it achieves anything useful for us. This is not the case for 64-bit ARM. The identity mapping used by the firmware is arbitrarily converted into another permutation of userland addresses (i.e., bits [63:48] cleared), and the runtime code could easily deal with the original layout in exactly the same way as it deals with the converted layout. However, due to constraints related to page size differences if the OS is not running with 4k pages, and related to systems that may expose the individual sections of PE/COFF runtime modules as different memory regions, creating the virtual layout is a bit fiddly, and requires us to sort the memory map and reason about adjacent regions with identical memory types etc etc. So the obvious fix is to stop calling SetVirtualAddressMap() altogether on arm64 systems. However, to avoid surprises, which are notoriously hard to diagnose when it comes to OS<->firmware interactions, let's start by making it an opt-out feature, and implement support for the 'efi=novamap' kernel command line parameter on ARM and arm64 systems. ( Note that 32-bit ARM generally does require SetVirtualAddressMap() to be used, given that the physical memory map and the kernel virtual address map are not guaranteed to be non-overlapping like on arm64. However, having support for efi=novamap,noruntime on 32-bit ARM, combined with the recently proposed support for earlycon=efifb, is likely to be useful to diagnose boot issues on such systems if they have no accessible serial port. ) Tested-by:
Jeffrey Hugo <jhugo@codeaurora.org> Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Alexander Graf <agraf@suse.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20190202094119.13230-8-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit 3e3380d0 ] Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7 ("dt-bindings: Remove leading 0x from bindings notation") Reported-by:
David Daney <ddaney@caviumnetworks.com> Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Mathieu Malaterre <malat@debian.org> [vzapolskiy: fixed commit message to pass checkpatch.pl test] Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Shayenne Moura authored
[ Upstream commit def35e7c ] kms_flip tests are breaking on vkms when simulate vblank because vblank event sequence count returns one extra frame after arm vblank event to make a page flip. When vblank interrupt happens, userspace processes the vblank event and issues the next page flip command. Kernel calls queue_work to call commit_planes and arm the new page flip. The next vblank picks up the newly armed vblank event and vblank interrupt happens again. The arm and vblank event are asynchronous, then, on the next vblank, we receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp and vblank seqno matches. Function `get_vblank_timestamp` is reached by 2 ways: - from `drm_mode_page_flip_ioctl`: driver is doing one atomic operation to synchronize planes in the same output. There is no vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1 on vblank count, and the variable in_vblank_irq is false - from `vkms_vblank_simulate`: since the driver is doing a vblank simulation, the variable in_vblank_irq is true. Fix this problem subtracting one vblank period from vblank_time when `get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`, i.e., is not a real vblank interrupt, and getting the timestamp and vblank seqno when it is a real vblank interrupt. The reason for all this is that get_vblank_timestamp always supplies the timestamp for the next vblank event. The hrtimer is the vblank simulator, and it needs the correct previous value to present the next vblank. Since this is how hw timestamp registers work and what the vblank core expects. Signed-off-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Andrea Parri authored
[ Upstream commit c546951d ] move_queued_task() synchronizes with task_rq_lock() as follows: move_queued_task() task_rq_lock() [S] ->on_rq = MIGRATING [L] rq = task_rq() WMB (__set_task_cpu()) ACQUIRE (rq->lock); [S] ->cpu = new_cpu [L] ->on_rq where "[L] rq = task_rq()" is ordered before "ACQUIRE (rq->lock)" by an address dependency and, in turn, "ACQUIRE (rq->lock)" is ordered before "[L] ->on_rq" by the ACQUIRE itself. Use READ_ONCE() to load ->cpu in task_rq() (c.f., task_cpu()) to honor this address dependency. Also, mark the accesses to ->cpu and ->on_rq with READ_ONCE()/WRITE_ONCE() to comply with the LKMM. Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/r/20190121155240.27173-1-andrea.parri@amarulasolutions.comSigned-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 5de0fef0 ] The EFI memory attributes code cross-references the EFI memory map with the more granular EFI memory attributes table to ensure that they are in sync before applying the strict permissions to the regions it describes. Since we always install virtual mappings for the EFI runtime regions to which these strict permissions apply, we currently perform a sanity check on the EFI memory descriptor, and ensure that the EFI_MEMORY_RUNTIME bit is set, and that the virtual address has been assigned. However, in cases where a runtime region exists at physical address 0x0, and the virtual mapping equals the physical mapping, e.g., when running in mixed mode on x86, we encounter a memory descriptor with the runtime attribute and virtual address 0x0, and incorrectly draw the conclusion that a runtime region exists for which no virtual mapping was installed, and give up altogether. The consequence of this is that firmware mappings retain their read-write-execute permissions, making the system more vulnerable to attacks. So let's only bail if the virtual address of 0x0 has been assigned to a physical region that does not reside at address 0x0. Signed-off-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Alexander Graf <agraf@suse.de> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jeffrey Hugo <jhugo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Jones <pjones@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 10f0d2f5 ("efi: Implement generic support for the Memory ...") Link: http://lkml.kernel.org/r/20190202094119.13230-4-ard.biesheuvel@linaro.orgSigned-off-by:
-
Hidetoshi Seto authored
[ Upstream commit 1ca4fa3a ] register_sched_domain_sysctl() copies the cpu_possible_mask into sd_sysctl_cpus, but only if sd_sysctl_cpus hasn't already been allocated (ie, CONFIG_CPUMASK_OFFSTACK is set). However, when CONFIG_CPUMASK_OFFSTACK is not set, sd_sysctl_cpus is left uninitialized (all zeroes) and the kernel may fail to initialize sched_domain sysctl entries for all possible CPUs. This is visible to the user if the kernel is booted with maxcpus=n, or if ACPI tables have been modified to leave CPUs offline, and then checking for missing /proc/sys/kernel/sched_domain/cpu* entries. Fix this by separating the allocation and initialization, and adding a flag to initialize the possible CPU entries while system booting only. Tested-by:
Syuuichirou Ishii <ishii.shuuichir@jp.fujitsu.com> Tested-by:
Tarumizu, Kohei <tarumizu.kohei@jp.fujitsu.com> Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by:
Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Acked-by:
-
wen yang authored
[ Upstream commit 11907e9d ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by:
Wen Yang <yellowriver2010@hotmil.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit dbf592f3 ] If we have >=10 (logical) CPUs, our command size exceeds the internal buffer size and the command fails; fix that by using IWL_HCMD_DFL_NOCOPY for the command that's allocated anyway. While at it, also fix the leak of cmd, and use struct_size() to calculate its size. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Fixes: 8edbfaa1 ("iwlwifi: mvm: configure multi RX queue") Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Stefan Roese authored
[ Upstream commit 46c33787 ] This patch adds a return code check on device_reset() and removes the compile warning. Signed-off-by:
Stefan Roese <sr@denx.de> Cc: Mark Brown <broonie@kernel.org> Cc: Sankalp Negi <sankalpnegi2310@gmail.com> Cc: Chuanhong Guo <gch981213@gmail.com> Cc: John Crispin <john@phrozen.org> Reviewed-by:
NeilBrown <neil@brown.name> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit e814e688 ] If an I2C adapter doesn't match the provided device tree node, also try matching the parent's device tree node. This allows finding an adapter based on the device node of the parent device that was used to register it. This fixes a regression on Tegra124-based Chromebooks (Nyan) where the eDP controller registers an I2C adapter that is used to read to EDID. After commit 993a815d ("dt-bindings: panel: Add missing .txt suffix") this stopped working because the I2C adapter could no longer be found. The approach in this patch fixes the regression without introducing the issues that the above commit solved. Fixes: 17ab7806 ("drm: don't link DP aux i2c adapter to the hardware device node") Signed-off-by:
Thierry Reding <treding@nvidia.com> Tested-by:
Tristan Bastian <tristan-c.bastian@gmx.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Rajneesh Bhardwaj authored
[ Upstream commit 0e68eeea ] A previous commit "platform/x86: intel_pmc_core: Make the driver PCH family agnostic <c977b98b>" provided better abstraction to this driver but has some fundamental issues. e.g. the following condition for (index = 0; index < pmcdev->map->ppfear_buckets && index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++) is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which is _wrong_ and even though ppfear_buckets is 8, the loop fails to read all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This patch refactors the pfear show logic to correctly read PCH IP power gating status for Cannonlake and beyond. Cc: "David E. Box" <david.e.box@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: c977b98b ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic") Signed-off-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 59f58708 ] e1000e sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves e1000e in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let e1000e always use suspend callback to set correct WoL during system suspend. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 0f9e980b ] I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again. [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Tested-by:
-
Mathieu Poirier authored
[ Upstream commit 84001866 ] When pmu::setup_aux() is called the coresight PMU needs to know which sink to use for the session by looking up the information in the event's attr::config2 field. As such simply replace the cpu information by the complete perf_event structure and change all affected customers. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Suzuki Poulouse <suzuki.poulose@arm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 77476360 ] [Why] This fixes an mpc programming error for the following sequence of atomic commits when pipe split is enabled: Commit 1: CRTC0 (plane 4, plane 3) Pipe 0: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 1: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Pipe 2: old_plane_state = A0, new_plane_state = A1, new_tg = T0 Pipe 3: old_plane_state = B0, new_plane_state = B1, new_tg = T0 Commit 2: CRTC0 (plane 3), CRTC1 (plane 2) Pipe 0: old_plane_state = A1, new_plane_state = A2, new_tg = T0 Pipe 1: old_plane_state = B1, new_plane_state = B2, new_tg = T1 Pipe 2: old_plane_state = A1, new_plane_state = NULL, new_tg = NULL Pipe 3: old_plane_state = B1, new_plane_state = NULL, new_tg = NULL In the second commit the assertion for mpcc in use is hit because mpcc disconnect never occurs for pipe 1. This is because the stream changes for pipe 1 and the opp_list is empty. This sequence occurs when running the "igt@kms_plane_multiple@atomic-pipe-A-tiling-none" test with two displays connected. [How] Expand the reset condition to include: "old_pipe_ctx->stream_res.tg != new_pipe_ctx->stream_res.tg" ...but only when the plane state is non-NULL for both old and new. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 5062b797 ] [Why] There are opt1c lock warnings and CRTC read timeouts when running the "igt@kms_plane@plane-position-hole-dpms-pipe-*" tests. These are caused by trying to reprogram planes that are not in the current context. DPMS off removes the stream from the context. In this case: new_crtc_state->active_changed = true new_crtc_state->mode_changed = false The planes are reprogrammed before the stream is removed from the context because stream_state->mode_changed = false. For DPMS adds the stream and planes back to the context: new_crtc_state->active_changed = true new_crtc_state->mode_changed = false The planes are also reprogrammed here before the stream is added to the context because stream_state->mode_changed = true. They were not previously in the current context so warnings occur here. [How] Set stream_state->mode_changed = true when new_crtc_state->active_changed = true too. This prevents reprogramming before the context is applied in DC. The programming will be done after the context is applied. Signed-off-by:
-
Julia Lawall authored
[ Upstream commit 4c6d8fc2 ] Add an of_node_put when the result of of_graph_get_remote_port_parent is not available. Add a second of_node_put if no encoder is selected (encoder remains NULL). The semantic match that finds the first problem is as follows (http://coccinelle.lip6.fr): // <smpl> @r exists@ local idexpression e; expression x; @@ e = of_graph_get_remote_port_parent(...); ... when != x = e when != true e == NULL when != of_node_put(e) when != of_fwnode_handle(e) ( return e; | *return ...; ) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit f25191bb ] The following traceback is sometimes seen when booting an image in qemu: [ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 54.611085] Fusion MPT base driver 3.04.20 [ 54.611877] Copyright (c) 1999-2008 LSI Corporation [ 54.616234] Fusion MPT SAS Host driver 3.04.20 [ 54.635139] sysctl duplicate entry: /dev/cdrom//info [ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1 [ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 54.641273] Workqueue: events_unbound async_run_entry_fn [ 54.641273] Call Trace: [ 54.641273] dump_stack+0x67/0x90 [ 54.641273] __register_sysctl_table+0x50b/0x570 [ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80 [ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0 [ 54.646814] __register_sysctl_paths+0x1c8/0x1f0 [ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f [ 54.646814] register_cdrom.cold.24+0x2a/0x33 [ 54.646814] sr_probe+0x4bd/0x580 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] really_probe+0xd6/0x260 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] driver_probe_device+0x4a/0xb0 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] bus_for_each_drv+0x73/0xc0 [ 54.646814] __device_attach+0xd6/0x130 [ 54.646814] bus_probe_device+0x9a/0xb0 [ 54.646814] device_add+0x40c/0x670 [ 54.646814] ? __pm_runtime_resume+0x4f/0x80 [ 54.646814] scsi_sysfs_add_sdev+0x81/0x290 [ 54.646814] scsi_probe_and_add_lun+0x888/0xc00 [ 54.646814] ? scsi_autopm_get_host+0x21/0x40 [ 54.646814] __scsi_add_device+0x116/0x130 [ 54.646814] ata_scsi_scan_host+0x93/0x1c0 [ 54.646814] async_run_entry_fn+0x34/0x100 [ 54.646814] process_one_work+0x237/0x5e0 [ 54.646814] worker_thread+0x37/0x380 [ 54.646814] ? rescuer_thread+0x360/0x360 [ 54.646814] kthread+0x118/0x130 [ 54.646814] ? kthread_create_on_node+0x60/0x60 [ 54.646814] ret_from_fork+0x3a/0x50 The only sensible explanation is that cdrom_sysctl_register() is called twice, once from the module init function and once from register_cdrom(). cdrom_sysctl_register() is not mutex protected and may happily execute twice if the second call is made before the first call is complete. Use a static atomic to ensure that the function is executed exactly once. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Manfred Schlaegl authored
[ Upstream commit a5399db1 ] There is no clipping on the x or y axis for logos larger that the framebuffer size. Therefore: a logo bigger than screen size leads to invalid memory access: [ 1.254664] Backtrace: [ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684) [ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4 [ 1.254774] r4:c6a3e800 [ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c) [ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800 [ 1.254852] r4:c6808c00 [ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8) [ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080 [ 1.254928] r4:c6808c00 [ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4) [ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0 So prevent displaying a logo bigger than screen size and avoid invalid memory access. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 93c09704 ] The link status value latches link-down events. To get the current status we read the register twice in genphy_update_link(). There's a potential risk that we miss a link-down event in polling mode. This may cause issues if the user e.g. connects his machine to a different network. On the other hand reading the latched value may cause issues in interrupt mode. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up and triggers an interrupt. Interrupt handler reads link status, means it reads the latched "link is down" info. But there won't be another interrupt as long as link stays up, therefore phylib will never recognize that link is up. Deal with both scenarios by reading the register twice in interrupt mode only. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Raju Rangoju authored
[ Upstream commit f368ff18 ] When an application aborts the connection by moving QP from RTS to ERROR, then iw_cxgb4's modify_rc_qp() RTS->ERROR logic sets the *srqidxp to 0 via t4_set_wq_in_error(&qhp->wq, 0), and aborts the connection by calling c4iw_ep_disconnect(). c4iw_ep_disconnect() does the following: 1. sends up a close_complete_upcall(ep, -ECONNRESET) to libcxgb4. 2. sends abort request CPL to hw. But, since the close_complete_upcall() is sent before sending the ABORT_REQ to hw, libcxgb4 would fail to release the srqidx if the connection holds one. Because, the srqidx is passed up to libcxgb4 only after corresponding ABORT_RPL is processed by kernel in abort_rpl(). This patch handle the corner-case by moving the call to close_complete_upcall() from c4iw_ep_disconnect() to abort_rpl(). So that libcxgb4 is notified about the -ECONNRESET only after abort_rpl(), and libcxgb4 can relinquish the srqidx properly. Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 316734fd ] It appears that the mvpp22 can get stuck with SGMII negotiation. The symptoms are that in-band negotiation never completes and the partner (eg, PHY) never reports SGMII link up, or if it supports negotiation bypass, goes into negotiation bypass mode (which will happen when the PHY sees that the MAC is alive but gets no response.) Triggering the PHY end of the link to re-negotiate results in the bypass bit clearing on the PHY, and then re-setting - indicating that the problem is at the mvpp22 GMAC end. Asserting the GMAC reset and de-asserting it resolves the issue. Arrange to assert the GMAC reset at probe time, and deassert it only after we have configured the GMAC for the appropriate mode. This resolves the issue. Tested-by:
Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 1136b072 ] Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. This can be largely avoided for interrupts which are not marked as 'PER_CPU' interrupts by simply adding a per interrupt summation counter which is incremented along with the per interrupt per cpu counter. The PER_CPU interrupts need to avoid that and use only per cpu accounting because they share the interrupt number and the interrupt descriptor and concurrent updates would conflict or require unwanted synchronization. Reported-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Reviewed-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135020.925487496@linutronix.de 8<------------- v2: Undo the unintentional layout change of struct irq_desc. include/linux/irqdesc.h | 1 + kernel/irq/chip.c | 12 ++++++++++-- kernel/irq/internals.h | 8 +++++++- kernel/irq/irqdesc.c | 7 ++++++- 4 files changed, 24 insertions(+), 4 deletions(-) Signed-off-by:
-
Coly Li authored
[ Upstream commit 596b5a5d ] Currently sysfs_strtoul_clamp() is defined as, 82 #define sysfs_strtoul_clamp(file, var, min, max) \ 83 do { \ 84 if (attr == &sysfs_ ## file) \ 85 return strtoul_safe_clamp(buf, var, min, max) \ 86 ?: (ssize_t) size; \ 87 } while (0) The problem is, if bit width of var is less then unsigned long, min and max may not protect var from integer overflow, because overflow happens in strtoul_safe_clamp() before checking min and max. To fix such overflow in sysfs_strtoul_clamp(), to make min and max take effect, this patch adds an unsigned long variable, and uses it to macro strtoul_safe_clamp() to convert an unsigned long value in range defined by [min, max]. Then assign this value to var. By this method, if bit width of var is less than unsigned long, integer overflow won't happen before min and max are checking. Now sysfs_strtoul_clamp() can properly handle smaller data type like unsigned int, of cause min and max should be defined in range of unsigned int too. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
