- 23 Oct, 2023 5 commits
-
-
Stanislaw Gruszka authored
Initialize HW specific parameters only once. We do not have to do this on every power_up (performed during initialization and on resume). Move corresponding code to ->info_init() Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
-
Krystian Pradzynski authored
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC message. This will make reading logs and debugging IPC issues easier. Co-developed-by:
Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by:
Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by:
-
Karol Wachowski authored
Do not unnecessarily wake up device to read clock rate. Return 0 as clk_rate if device is suspended. Signed-off-by:
Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by:
-
Krystian Pradzynski authored
Remove two out of four _POLL macros. For two remaining _POLL macros add message about polling register start and finish. Additionally avoid inconsequence when using REGV_WR/RD macros in MMU code - passing raw register offset instead of register name. Signed-off-by:
-
Krystian Pradzynski authored
Quite often during test corner cases IPC, JSM functions can flood dmesg with warn or err messages. With that lost dmesg history. Change warn, err to ratelimited versions in IPC, JSM to suppress dmesg spam occurrence during fail test scenarios. Signed-off-by:
-
- 19 Oct, 2023 35 commits
-
-
Cong Yang authored
DRM_PANEL_ILITEK_ILI9882T is being split out from DRM_PANEL_BOE_TV101WUM_NL6. Since the arm64 defconfig had the BOE panel driver enabled, let's also enable the Ilitek driver. Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Signed-off-by:
-
Cong Yang authored
At present, we have found that there may be a problem of blurred screen during fast sleep/resume. The direct cause of the blurred screen is that the IC does not receive 0x28/0x10. Because of the particularity of the IC, before the panel enters sleep hid must stop scanning, as i2c_hid_core_suspend before ili9882t_disable. If move the ili9882t_enter_sleep_mode function to ili9882t_unprepare, touch reset will pull low before panel entersleep, which does not meet the timing requirements.. So in order to solve this problem, the IC can handle it through the exception mechanism when it cannot receive 0x28/0x10 command. Handling exceptions requires a reset 50ms delay. Refer to vendor detailed analysis [1]. Ilitek vendor also suggested switching the page before entering sleep to avoid panel IC not receiving 0x28/0x10 command. Note: 0x28 is display off, 0x10 is sleep in. [1]: https://github.com/ILITEK-LoganLin/Document/tree/main/ILITEK_Power_SequenceSigned-off-by:
-
Cong Yang authored
The Starry ILI9882t-based panel should never have been part of the boe tv101wum driver, it is clearly based on the Ilitek ILI9882t display controller and if you look at the custom command sequences for the panel these clearly contain the signature Ilitek page switch (0xff) commands. The hardware has nothing in common with the other panels supported by this driver. Break this out into a separate driver and config symbol instead. If the placement here is out of convenience for using similar code, we should consider creating a helper library instead. Co-developed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thomas Zimmermann authored
Improve readability by putting all register constants into a separate header file. No functional changes. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Jocelyn Falempe <jfalempe@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017083653.10063-13-tzimmermann@suse.de
-
Thomas Zimmermann authored
Rename AST_IO_MISC_PORT_READ to AST_IO_VGAMR_R to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_INPUT_STATUS1_READ to AST_IO_VGAIR1_R to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_CRTC_PORT to AST_IO_VGACRI to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_GR_PORT to AST_IO_VGAGRI to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_DAC_DATA to AST_IO_VGAPDR to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_DAC_INDEX_WRITE to AST_IO_VGADWR to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_DAC_INDEX_READ to AST_IO_VGADRR to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_VGA_SEQ_PORT to AST_IO_VGASRI to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_VGA_ENABLE_PORT to AST_IO_VGAER to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_MISC_PORT_WRITE to AST_IO_VGAMR_W to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Rename AST_IO_AR_PORT_WRITE to AST_IO_VGAARI_W to align naming in the driver with documentation. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230927074722.6197-47-tzimmermann@suse.de
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize each instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. To simplify the conversion, provide a dedicated fb_ops instance for accelerated devices. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Initialize the instance of struct fb_ops with fbdev initializer macros for framebuffers in I/O address space. Set the read/write, draw and mmap callbacks to the correct implementation and avoid implicit defaults. Also select the necessary I/O helpers in Kconfig. Fbdev drivers sometimes rely on the callbacks being NULL for a default implementation to be invoked; hence requiring the I/O helpers to be built in any case. Setting all callbacks in all drivers explicitly will allow to make the I/O helpers optional. This benefits systems that do not use these functions. No functional changes. Signed-off-by:
-
