A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86.  Disable per-VMA locks config to
prevent this issue until the fix is confirmed.  This is expected to be a
temporary measure.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=217624
[2] https://lore.kernel.org/all/20230227173632.3292573-30-surenb@google.com

Link: https://lkml.kernel.org/r/20230706011400.2949242-3-surenb@google.comReported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217624
Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "Avoid memory corruption caused by per-VMA locks", v4.

A memory corruption was reported in [1] with bisection pointing to the
patch [2] enabling per-VMA locks for x86.  Based on the reproducer
provided in [1] we suspect this is caused by the lack of VMA locking while
forking a child process.

Patch 1/2 in the series implements proper VMA locking during fork.  I
tested the fix locally using the reproducer and was unable to reproduce
the memory corruption problem.

This fix can potentially regress some fork-heavy workloads.  Kernel build
time did not show noticeable regression on a 56-core machine while a
stress test mapping 10000 VMAs and forking 5000 times in a tight loop
shows ~7% regression.  If such fork time regression is unacceptable,
disabling CONFIG_PER_VMA_LOCK should restore its performance.  Further
optimizations are possible if this regression proves to be problematic.

Patch 2/2 disables per-VMA locks until the fix is tested and verified.


This patch (of 2):

When forking a child process, parent write-protects an anonymous page and
COW-shares it with the child being forked using copy_present_pte(). 
Parent's TLB is flushed right before we drop the parent's mmap_lock in
dup_mmap().  If we get a write-fault before that TLB flush in the parent,
and we end up replacing that anonymous page in the parent process in
do_wp_page() (because, COW-shared with the child), this might lead to some
stale writable TLB entries targeting the wrong (old) page.  Similar issue
happened in the past with userfaultfd (see flush_tlb_page() call inside
do_wp_page()).

Lock VMAs of the parent process when forking a child, which prevents
concurrent page faults during fork operation and avoids this issue.  This
fix can potentially regress some fork-heavy workloads.  Kernel build time
did not show noticeable regression on a 56-core machine while a stress
test mapping 10000 VMAs and forking 5000 times in a tight loop shows ~7%
regression.  If such fork time regression is unacceptable, disabling
CONFIG_PER_VMA_LOCK should restore its performance.  Further optimizations
are possible if this regression proves to be problematic.

Link: https://lkml.kernel.org/r/20230706011400.2949242-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230706011400.2949242-2-surenb@google.com
Fixes: 0bff0aae ("x86/mm: try VMA lock-based page fault handling first")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://lore.kernel.org/all/dbdef34c-3a07-5951-e1ae-e9c6e3cdf51b@kernel.org/Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Closes: https://lore.kernel.org/all/b198d649-f4bf-b971-31d0-e8433ec2a34c@applied-asynchrony.com/Reported-by: Jacob Young <jacobly.alt@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=3D217624Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Holger Hoffsttte <holger@applied-asynchrony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Pull iomap updates from Darrick Wong:

 - Fix a type signature mismatch

 - Drop Christoph as maintainer

* tag 'iomap-6.5-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  iomap: drop me [hch] from MAINTAINERS for iomap
  fs: iomap: Change the type of blocksize from 'int' to 'unsigned int' in iomap_file_buffered_write_punch_delalloc

Pull vfs fix from Christian Brauner:
 "A fix for the backing file work from this cycle.

  When init_file() failed it would call file_free_rcu() on the file
  allocated by the caller of init_file(). It naively assumed that the
  correct cleanup operation would be called depending on whether it is a
  regular file or a backing file. However, that presupposes that the
  FMODE_BACKING flag would already be set which it won't be as that is
  done in the caller of init_file().

  Fix that bug by moving the cleanup of the allocated file into the
  caller where it belongs in the first place. There's no good reason for
  init_file() to consume resources it didn't allocate. This is a
  mainline only fix and was reported by syzbot. The fix was validated by
  syzbot against the provided reproducer"

* tag 'v6.5/vfs.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: move cleanup from init_file() into its callers

Pull i2c updates from Wolfram Sang:

 - I2C has now a co-maintainer taking care of the host drivers. Welcome
   Andi Shyti and have fun!

 - platform remove callback converted to return void in drivers

 - simplify drivers by using devm_clk_get_enabled()

 - introduce i2c_get_match_data() to avoid more boilerplate code
   (especially since the core stopped delivering an i2c_device_id)

 - and the usual bunch of driver updates

* tag 'i2c-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: uniphier: Use devm_clk_get_enabled()
  i2c: uniphier-f: Use devm_clk_get_enabled()
  i2c: owl: Use devm_clk_get_enabled()
  i2c: lpc2k: Use devm_clk_get_enabled()
  i2c: hix5hd2: Use devm_clk_get_enabled()
  i2c: sun6i-p2wi: Use devm_clk_get_enabled()
  i2c: pasemi-platform: Use devm_clk_get_enabled()
  i2c: mt7621: Use devm_clk_get_enabled()
  i2c: xiic: Use devm_clk_get_enabled()
  i2c: davinci: Use platform table macro over module_alias
  i2c: ocores: use devm_ managed clks
  i2c: nomadik: Use dev_err_probe() whenever possible
  i2c: nomadik: Use devm_clk_get_enabled()
  i2c: nomadik: Remove unnecessary goto label
  usb: typec: ucsi: Mark dGPUs as DEVICE scope
  i2c: wmt: Use devm_platform_get_and_ioremap_resource()
  i2c: versatile: Use devm_platform_get_and_ioremap_resource()
  i2c: hix5hd2: Add I2C_M_STOP flag support for i2c-hix5hd2 driver.
  i2c: mpc: Use of_property_read_reg() to parse "reg"
  i2c: imx-lpi2c: Don't open-code DIV_ROUND_UP
  ...

Pull parisc updates from Helge Deller:

 - Add missing cacheflush() syscall

 - Fix STI console on 64-bit-only machines

 - Move kernel debug options to Kconfig.debug

 - Lots of warning fixes in arch/parisc/ and drivers/parisc/ when
   compiled with W=1

 - Enable some more graphics drivers in refreshed defconfigs

* tag 'parisc-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (29 commits)
  parisc: Refresh defconfigs
  parisc: irq: Add irq-related function declarations
  parisc: Move init function declarations into header file
  parisc: dino: Make dino_init() returning void
  parisc: lba_pci: Mark two variables __maybe_unused
  parisc: unaligned: Include header file to avoid missing prototype warnings
  parisc: signal: Mark do_notify_resume() and sys_rt_sigreturn() asmlinkage
  parisc: unwind: Mark start and stop variables __maybe_unused
  parisc: init: Drop unused variable end_paddr
  parisc: traps: Mark functions static
  parisc: processor: Fix kdoc for init_cpu_profiler()
  parisc: sys_parisc: parisc_personality() is called from asm code
  parisc: ccio-dma: Fix kdoc and compiler warnings
  parisc: pdc_stable: Fix kdoc and compiler warnings
  parisc: pci-dma: Make pcxl_alloc_range() static
  parisc: Mark image_size __maybe_unused in perf_write()
  parisc: module: Mark symindex __maybe_unused
  parisc: pdc_chassis: Fix kdoc warnings
  parisc: firmware: Fix kdoc warnings
  parisc: drivers: Fix kdoc warnings
  ...

The use of file_free_rcu() in init_file() to free the struct that was
allocated by the caller was hacky and we got what we deserved.

Let init_file() and its callers take care of cleaning up each after
their own allocated resources on error.

Fixes: 62d53c4a ("fs: use backing_file container for internal files with "fake" f_path") # mainline only
Reported-and-tested-by: syzbot+ada42aab05cf51b00e98@syzkaller.appspotmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Message-Id: <20230701171134.239409-1-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>

Pull arch/csky update from Guo Ren:

 - Correct thread.trap_no restore of uprobe

* tag 'csky-for-linus-6.5' of https://github.com/c-sky/csky-linux:
  csky: uprobes: Restore thread.trap_no

Pull NFS client updates from Trond Myklebust:
"Stable fixes and other bugfixes:

   - nfs: don't report STATX_BTIME in ->getattr

   - Revert 'NFSv4: Retry LOCK on OLD_STATEID during delegation return'
     since it breaks NFSv4 state recovery.

   - NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION

   - Fix the NFSv4.2 xattr cache shrinker_id

   - Force a ctime update after a NFSv4.2 SETXATTR call

  Features and cleanups:

   - NFS and RPC over TLS client code from Chuck Lever

   - Support for use of abstract unix socket addresses with the rpcbind
     daemon

   - Sysfs API to allow shutdown of the kernel RPC client and prevent
     umount() hangs if the server is known to be permanently down

   - XDR cleanups from Anna"

* tag 'nfs-for-6.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (33 commits)
  Revert "NFSv4: Retry LOCK on OLD_STATEID during delegation return"
  NFS: Don't cleanup sysfs superblock entry if uninitialized
  nfs: don't report STATX_BTIME in ->getattr
  NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
  NFSv4.2: fix wrong shrinker_id
  NFSv4: Clean up some shutdown loops
  NFS: Cancel all existing RPC tasks when shutdown
  NFS: add sysfs shutdown knob
  NFS: add a sysfs link to the acl rpc_client
  NFS: add a sysfs link to the lockd rpc_client
  NFS: Add sysfs links to sunrpc clients for nfs_clients
  NFS: add superblock sysfs entries
  NFS: Make all of /sys/fs/nfs network-namespace unique
  NFS: Open-code the nfs_kset kset_create_and_add()
  NFS: rename nfs_client_kobj to nfs_net_kobj
  NFS: rename nfs_client_kset to nfs_kset
  NFS: Add an "xprtsec=" NFS mount option
  NFS: Have struct nfs_client carry a TLS policy field
  SUNRPC: Add a TCP-with-TLS RPC transport class
  SUNRPC: Capture CMSG metadata on client-side receive
  ...

Pull x86 fix from Thomas Gleixner:
 "A single regression fix for x86:

  Moving the invocation of arch_cpu_finalize_init() earlier in the boot
  process caused a boot regression on IBT enabled system.

  The root cause is not the move of arch_cpu_finalize_init() itself. The
  system fails to boot because the subsequent efi_enter_virtual_mode()
  code has a non-IBT safe EFI call inside. This was not noticed before
  because IBT was enabled after the EFI initialization.

  Switching the EFI call to use the IBT safe wrapper cures the problem"

* tag 'x86-urgent-2023-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Make efi_set_virtual_address_map IBT safe

Pull Kbuild updates from Masahiro Yamada:

 - Remove the deprecated rule to build *.dtbo from *.dts

 - Refactor section mismatch detection in modpost

 - Fix bogus ARM section mismatch detections

 - Fix error of 'make gtags' with O= option

 - Add Clang's target triple to KBUILD_CPPFLAGS to fix a build error
   with the latest LLVM version

 - Rebuild the built-in initrd when KBUILD_BUILD_TIMESTAMP is changed

 - Ignore more compiler-generated symbols for kallsyms

 - Fix 'make local*config' to handle the ${CONFIG_FOO} form in Makefiles

 - Enable more kernel-doc warnings with W=2

 - Refactor <linux/export.h> by generating KSYMTAB data by modpost

 - Deprecate <asm/export.h> and <asm-generic/export.h>

 - Remove the EXPORT_DATA_SYMBOL macro

 - Move the check for static EXPORT_SYMBOL back to modpost, which makes
   the build faster

 - Re-implement CONFIG_TRIM_UNUSED_KSYMS with one-pass algorithm

 - Warn missing MODULE_DESCRIPTION when building modules with W=1

 - Make 'make clean' robust against too long argument error

 - Exclude more objects from GCOV to fix CFI failures with GCOV

 - Allow 'make modules_install' to install modules.builtin and
   modules.builtin.modinfo even when CONFIG_MODULES is disabled

 - Include modules.builtin and modules.builtin.modinfo in the
   linux-image Debian package even when CONFIG_MODULES is disabled

 - Revive "Entering directory" logging for the latest Make version

* tag 'kbuild-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (72 commits)
  modpost: define more R_ARM_* for old distributions
  kbuild: revive "Entering directory" for Make >= 4.4.1
  kbuild: set correct abs_srctree and abs_objtree for package builds
  scripts/mksysmap: Ignore prefixed KCFI symbols
  kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb
  kbuild: builddeb: always make modules_install, to install modules.builtin*
  modpost: continue even with unknown relocation type
  modpost: factor out Elf_Sym pointer calculation to section_rel()
  modpost: factor out inst location calculation to section_rel()
  kbuild: Disable GCOV for *.mod.o
  kbuild: Fix CFI failures with GCOV
  kbuild: make clean rule robust against too long argument error
  script: modpost: emit a warning when the description is missing
  kbuild: make modules_install copy modules.builtin(.modinfo)
  linux/export.h: rename 'sec' argument to 'license'
  modpost: show offset from symbol for section mismatch warnings
  modpost: merge two similar section mismatch warnings
  kbuild: implement CONFIG_TRIM_UNUSED_KSYMS without recursion
  modpost: use null string instead of NULL pointer for default namespace
  modpost: squash sym_update_namespace() into sym_add_exported()
  ...

Pull arm64 fix from Catalin Marinas:
 "Fix memory corruption (overwriting the kmalloc redzone) when saving
  the SVE state while in SVE streaming mode"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: sme: Use STR P to clear FFR context field in streaming SVE mode

Pull CXL updates from Dan Williams:
 "The highlights in terms of new functionality are support for the
  standard CXL Performance Monitor definition that appeared in CXL 3.0,
  support for device sanitization (wiping all data from a device),
  secure-erase (re-keying encryption of user data), and support for
  firmware update. The firmware update support is notable as it reuses
  the simple sysfs_upload interface to just cat(1) a blob to a sysfs
  file and pipe that to the device.

  Additionally there are a substantial number of cleanups and
  reorganizations to get ready for RCH error handling (RCH == Restricted
  CXL Host == current shipping hardware generation / pre CXL-2.0
  topologies) and type-2 (accelerator / vendor specific) devices.

  For vendor specific devices they implement a subset of what the
  generic type-3 (generic memory expander) driver expects. As a result
  the rework decouples optional infrastructure from the core driver
  context.

  For RCH topologies, where the specification working group did not want
  to confuse pre-CXL-aware operating systems, many of the standard
  registers are hidden which makes support standard bus features like
  AER (PCIe Advanced Error Reporting) difficult. The rework arranges for
  the driver to help the PCI-AER core. Bjorn is on board with this
  direction but a late regression disocvery means the completion of this
  functionality needs to cook a bit longer, so it is code
  reorganizations only for now.

  Summary:

   - Add infrastructure for supporting background commands along with
     support for device sanitization and firmware update

   - Introduce a CXL performance monitoring unit driver based on the
     common definition in the specification.

   - Land some preparatory cleanup and refactoring for the anticipated
     arrival of CXL type-2 (accelerator devices) and CXL RCH (CXL-v1.1
     topology) error handling.

   - Rework CPU cache management with respect to region configuration
     (device hotplug or other dynamic changes to memory interleaving)

   - Fix region reconfiguration vs CXL decoder ordering rules"

* tag 'cxl-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (51 commits)
  cxl: Fix one kernel-doc comment
  cxl/pci: Use correct flag for sanitize polling
  docs: perf: Minimal introduction the the CXL PMU device and driver
  perf: CXL Performance Monitoring Unit driver
  tools/testing/cxl: add firmware update emulation to CXL memdevs
  tools/testing/cxl: Use named effects for the Command Effect Log
  tools/testing/cxl: Fix command effects for inject/clear poison
  cxl: add a firmware update mechanism using the sysfs firmware loader
  cxl/test: Add Secure Erase opcode support
  cxl/mem: Support Secure Erase
  cxl/test: Add Sanitize opcode support
  cxl/mem: Wire up Sanitization support
  cxl/mbox: Add sanitization handling machinery
  cxl/mem: Introduce security state sysfs file
  cxl/mbox: Allow for IRQ_NONE case in the isr
  Revert "cxl/port: Enable the HDM decoder capability for switch ports"
  cxl/memdev: Formalize endpoint port linkage
  cxl/pci: Unconditionally unmask 256B Flit errors
  cxl/region: Manage decoder target_type at decoder-attach time
  cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM
  ...

Pull nvdimm and DAX updates from Vishal Verma:
 "This is mostly small cleanups and fixes, with the biggest change being
  the change to the DAX fault handler allowing it to return
  VM_FAULT_HWPOISON.

  Summary:

   - DAX fixes and cleanups including a use after free, extra
     references, and device unregistration, and a redundant variable.

   - Allow the DAX fault handler to return VM_FAULT_HWPOISON

   - A few libnvdimm cleanups such as making some functions and
     variables static where sufficient.

   - Add a few missing prototypes for wrapped functions in
     tools/testing/nvdimm"

* tag 'libnvdimm-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: enable dax fault handler to report VM_FAULT_HWPOISON
  nvdimm: make security_show static
  nvdimm: make nd_class variable static
  dax/kmem: Pass valid argument to memory_group_register_static
  fsdax: remove redundant variable 'error'
  dax: Cleanup extra dax_region references
  dax: Introduce alloc_dev_dax_id()
  dax: Use device_unregister() in unregister_dax_mapping()
  dax: Fix dax_mapping_release() use after free
  tools/testing/nvdimm: Drop empty platform remove function
  libnvdimm: mark 'security_show' static again
  testing: nvdimm: add missing prototypes for wrapped functions
  dax: fix missing-prototype warnings

Pull another sysctl fix from Luis Chamberlain:
 "Just one minor nit I forgot to merge"

* tag 'sysctl-fixes-v2-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  sysctl: set variable sysctl_mount_point storage-class-specifier to static

Merge tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull flexible-array update from Gustavo Silva:
 "Transform a zero-length array into a C99 flexible-array member.

  This addresses a build failure with Clang by fixing multiple
  '-Warray-bounds' warnings in drivers/staging/ks7010/ks_wlan_net.c"

* tag 'flex-array-transformations-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  uapi: wireless: Replace zero-length array with flexible-array member

Before commit d67790dd ("overflow: Add struct_size_t() helper") only
struct_size() existed, which expects a valid pointer instance containing
the flexible array.

However, when we determine the default struct pid allocation size for
the associated kmem cache of a pid namespace we need to take the nesting
depth of the pid namespace into account without an variable instance
necessarily being available.

In commit b69f0aeb ("pid: Replace struct pid 1-element array with
flex-array") we used to handle this the old fashioned way and cast NULL
to a struct pid pointer type. However, we do apparently have a dedicated
struct_size_t() helper for exactly this case. So switch to that.
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since do_vmi_align_munmap() will always honor the downgrade request on
the success, the callers no longer have to deal with confusing return
codes.  Since all callers that request downgrade actually want the lock
to be dropped, change the downgrade to an unlock request.

Note that the lock still needs to be held in read mode during the page
table clean up to avoid races with a map request.

Update do_vmi_align_munmap() to return 0 for success.  Clean up the
callers and comments to always expect the unlock to be honored on the
success path.  The error path will always leave the lock untouched.

As part of the cleanup, the wrapper function do_vmi_munmap() and callers
to the wrapper are also updated.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-mm/20230629191414.1215929-1-willy@infradead.org/Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that stack growth must always hold the mmap_lock for write, we can
always downgrade the mmap_lock to read and safely unmap pages from the
page table, even if we're next to a stack.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MMU version of lock_mm_and_find_vma releases the mm lock before
returning when VMA is not found. Do the same in noMMU version.
This fixes hang on an attempt to handle protection fault.

Fixes: d85a143b ("xtensa: fix NOMMU build with lock_mm_and_find_vma() conversion")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull smb client updates from Steve French:

 - Deferred close fix

 - Debugging improvements: display missing mount option, dump rc on
   invalidate inode failures, print client_guid in DebugData, log
   session id when matching session not found in reconnect, new dynamic
   tracepoint for session not found

 - Mount fixes including: potential null dereference, and possible
   memory leak and path name parsing when double slashes

 - Fix potential use after free in compounding

 - Two crediting (flow control) fixes: fix for crediting leak (stress
   scenario with excess lease credits) and better locking around
   updating credits

 - Three cleanups from issues pointed out by the kernel test robot

 - Session state check improvements (including for potential use after
   free)

 - DFS fixes: Fix for getattr on link when DFS disabled, fix for DFS
   mounts to same share with different prefix paths, DFS mount error
   checking improvement

* tag '6.5-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: new dynamic tracepoint to track ses not found errors
  cifs: log session id when a matching ses is not found
  smb: client: improve DFS mount check
  smb: client: fix shared DFS root mounts with different prefixes
  smb: client: fix parsing of source mount option
  smb: client: fix broken file attrs with nodfs mounts
  cifs: print client_guid in DebugData
  cifs: fix session state check in smb2_find_smb_ses
  cifs: fix session state check in reconnect to avoid use-after-free issue
  cifs: do all necessary checks for credits within or before locking
  cifs: prevent use-after-free by freeing the cfile later
  smb: client: fix warning in generic_ip_connect()
  smb: client: fix warning in CIFSFindNext()
  smb: client: fix warning in CIFSFindFirst()
  smb3: do not reserve too many oplock credits
  cifs: print more detail when invalidate_inode_mapping fails
  smb: client: fix warning in cifs_smb3_do_mount()
  smb: client: fix warning in cifs_match_super()
  cifs: print nosharesock value while dumping mount options
  SMB3: Do not send lease break acknowledgment if all file handles have been closed

Pull ksmbd server updates from Steve French:

 - two fixes for compounding bugs (make sure no out of bound reads with
   less common combinations of commands in the compound)

 - eight minor cleanup patches (e.g. simplifying return values, replace
   one element array, use of kzalloc where simpler)

 - fix for clang warning on possible overflow in filename conversion

* tag '6.5-rc-ksmbd-server-fixes-part1' of git://git.samba.org/ksmbd:
  ksmbd: avoid field overflow warning
  ksmbd: Replace one-element array with flexible-array member
  ksmbd: Use struct_size() helper in ksmbd_negotiate_smb_dialect()
  ksmbd: add missing compound request handing in some commands
  ksmbd: fix out of bounds read in smb2_sess_setup
  ksmbd: Replace the ternary conditional operator with min()
  ksmbd: use kvzalloc instead of kvmalloc
  ksmbd: Change the return value of ksmbd_vfs_query_maximal_access to void
  ksmbd: return a literal instead of 'err' in ksmbd_vfs_kern_path_locked()
  ksmbd: use kzalloc() instead of __GFP_ZERO
  ksmbd: remove unused ksmbd_tree_conn_share function

Pull nfsd fix from Chuck Lever:

 - Fix ordering of attributes in NFSv4 GETATTR replies

* tag 'nfsd-6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: Fix creation time serialization order

Merge tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching update from Petr Mladek:

 - Make a variable static to fix a sparse warning

* tag 'livepatching-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Make 'klp_stack_entries' static

Pull EFI updates from Ard Biesheuvel:
 "Although some more stuff is brewing, the EFI changes that are ready
  for mainline are few this cycle:

   - improve the PCI DMA paranoia logic in the EFI stub

   - some constification changes

   - add statfs support to efivarfs

   - allow user space to enumerate updatable firmware resources without
     CAP_SYS_ADMIN"

* tag 'efi-next-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi/libstub: Disable PCI DMA before grabbing the EFI memory map
  efi/esrt: Allow ESRT access without CAP_SYS_ADMIN
  efivarfs: expose used and total size
  efi: make kobj_type structure constant
  efi: x86: make kobj_type structure constant

Pull crypto updates from Herbert Xu:
 "API:
   - Add linear akcipher/sig API
   - Add tfm cloning (hmac, cmac)
   - Add statesize to crypto_ahash

  Algorithms:
   - Allow only odd e and restrict value in FIPS mode for RSA
   - Replace LFSR with SHA3-256 in jitter
   - Add interface for gathering of raw entropy in jitter

  Drivers:
   - Fix race on data_avail and actual data in hwrng/virtio
   - Add hash and HMAC support in starfive
   - Add RSA algo support in starfive
   - Add support for PCI device 0x156E in ccp"

* tag 'v6.5-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (85 commits)
  crypto: akcipher - Do not copy dst if it is NULL
  crypto: sig - Fix verify call
  crypto: akcipher - Set request tfm on sync path
  crypto: sm2 - Provide sm2_compute_z_digest when sm2 is disabled
  hwrng: imx-rngc - switch to DEFINE_SIMPLE_DEV_PM_OPS
  hwrng: st - keep clock enabled while hwrng is registered
  hwrng: st - support compile-testing
  hwrng: imx-rngc - fix the timeout for init and self check
  KEYS: asymmetric: Use new crypto interface without scatterlists
  KEYS: asymmetric: Move sm2 code into x509_public_key
  KEYS: Add forward declaration in asymmetric-parser.h
  crypto: sig - Add interface for sign/verify
  crypto: akcipher - Add sync interface without SG lists
  crypto: cipher - On clone do crypto_mod_get()
  crypto: api - Add __crypto_alloc_tfmgfp
  crypto: api - Remove crypto_init_ops()
  crypto: rsa - allow only odd e and restrict value in FIPS mode
  crypto: geniv - Split geniv out of AEAD Kconfig option
  crypto: algboss - Add missing dependency on RNG2
  crypto: starfive - Add RSA algo support
  ...

It turns out that xtensa has a really odd configuration situation: you
can do a no-MMU config, but still have the page fault code enabled.
Which doesn't sound all that sensible, but it turns out that xtensa can
have protection faults even without the MMU, and we have this:

    config PFAULT
        bool "Handle protection faults" if EXPERT && !MMU
        default y
        help
          Handle protection faults. MMU configurations must enable it.
          noMMU configurations may disable it if used memory map never
          generates protection faults or faults are always fatal.

          If unsure, say Y.

which completely violated my expectations of the page fault handling.

End result: Guenter reports that the xtensa no-MMU builds all fail with

  arch/xtensa/mm/fault.c: In function ‘do_page_fault’:
  arch/xtensa/mm/fault.c:133:8: error: implicit declaration of function ‘lock_mm_and_find_vma’

because I never exposed the new lock_mm_and_find_vma() function for the
no-MMU case.

Doing so is simple enough, and fixes the problem.
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a050ba1e ("mm/fault: convert remaining simple cases to lock_mm_and_find_vma()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

smatch reports
fs/proc/proc_sysctl.c:32:18: warning: symbol
  'sysctl_mount_point' was not declared. Should it be static?

This variable is only used in its defining file, so it should be static.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

Pull VFIO updates from Alex Williamson:

 - Adjust log levels for common messages (Oleksandr Natalenko, Alex
   Williamson)

 - Support for dynamic MSI-X allocation (Reinette Chatre)

 - Enable and report PCIe AtomicOp Completer capabilities (Alex
   Williamson)

 - Cleanup Kconfigs for vfio bus drivers (Alex Williamson)

 - Add support for CDX bus based devices (Nipun Gupta)

 - Fix race with concurrent mdev initialization (Eric Farman)

* tag 'vfio-v6.5-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/mdev: Move the compat_class initialization to module init
  vfio/cdx: add support for CDX bus
  vfio/fsl: Create Kconfig sub-menu
  vfio/platform: Cleanup Kconfig
  vfio/pci: Cleanup Kconfig
  vfio/pci-core: Add capability for AtomicOp completer support
  vfio/pci: Also demote hiding standard cap messages
  vfio/pci: Clear VFIO_IRQ_INFO_NORESIZE for MSI-X
  vfio/pci: Support dynamic MSI-X
  vfio/pci: Probe and store ability to support dynamic MSI-X
  vfio/pci: Use bitfield for struct vfio_pci_core_device flags
  vfio/pci: Update stale comment
  vfio/pci: Remove interrupt context counter
  vfio/pci: Use xarray for interrupt context storage
  vfio/pci: Move to single error path
  vfio/pci: Prepare for dynamic interrupt context storage
  vfio/pci: Remove negative check on unsigned vector
  vfio/pci: Consolidate irq cleanup on MSI/MSI-X disable
  vfio/pci: demote hiding ecap messages to debug level

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Export pcie_retrain_link() for use outside ASPM

   - Add Data Link Layer Link Active Reporting as another way for
     pcie_retrain_link() to determine the link is up

   - Work around link training failures (especially on the ASMedia
     ASM2824 switch) by training first at 2.5GT/s and then attempting
     higher rates

  Resource management:

   - When we coalesce host bridge windows, remove invalidated resources
     from the resource tree so future allocations work correctly

  Hotplug:

   - Cancel bringup sequence if card is not present, to keep from
     blinking Power Indicator indefinitely

   - Reassign bridge resources if necessary for ACPI hotplug

  Driver binding:

   - Convert platform_device .remove() callbacks to return void instead
     of a mostly useless int

  Power management:

   - Reduce wait time for secondary bus to be ready to speed up resume

   - Avoid putting EloPOS E2/S2/H2 (as well as Elo i2) PCIe Ports in
     D3cold

   - Call _REG when transitioning D-states so AML that uses the PCI
     config space OpRegion works, which fixes some ASMedia GPIO
     controllers after resume

  Virtualization:

   - Delay extra 250ms after FLR of Solidigm P44 Pro NVMe to avoid KVM
     hang when guest is rebooted

   - Add function 1 DMA alias quirk for Marvell 88SE9235

  Error handling:

   - Unexport pci_save_aer_state() since it's only used in drivers/pci/

   - Drop recommendation for drivers to configure AER Capability, since
     the PCI core does this for all devices

  ASPM:

   - Disable ASPM on MFD function removal to avoid use-after-free

   - Tighten up pci_enable_link_state() and pci_disable_link_state()
     interfaces so they don't enable/disable states the driver didn't
     specify

   - Avoid link retraining race that can happen if ASPM sets link
     control parameters while the link is in the midst of training for
     some other reason

  Endpoint framework:

   - Change "PCI Endpoint Virtual NTB driver" Kconfig prompt to be
     different from "PCI Endpoint NTB driver"

   - Automatically create a function specific attributes group for
     endpoint drivers to avoid reference counting issues

   - Fix many EPC test issues

   - Return pci_epf_type_add_cfs() error if EPF has no driver

   - Add kernel-doc for pci_epc_raise_irq() and pci_epc_map_msi_irq()
     MSI vector parameters

   - Pass EPF device ID to driver probe functions

   - Return -EALREADY if EPC has already been started/stopped

   - Add linkdown notifier support and use it in qcom-ep

   - Add Bus Master Enable event support and use it in qcom-ep

   - Add Qualcomm Modem Host Interface (MHI) endpoint driver

   - Add Layerscape PME interrupt handling to manage link-up
     notification

  Cadence PCIe controller driver:

   - Wait for link retrain to complete when working around the J721E
     i2085 erratum with Gen2 mode

  Faraday FTPC100 PCI controller driver:

   - Release clock resources on error paths

  Freescale i.MX6 PCIe controller driver:

   - Save and restore Root Port MSI control to work around hardware defect

  Intel VMD host bridge driver:

   - Reset VMD config register between soft reboots

   - Capture pci_reset_bus() return value instead of printing junk when
     it fails

  Qualcomm PCIe controller driver:

   - Add SDX65 endpoint compatible string to DT binding

   - Disable register write access after init for IP v2.3.3, v2.9.0

   - Use DWC helpers for enabling/disabling writes to DBI registers

   - Hide slot hotplug capability for IP v1.0.0, v1.9.0, v2.1.0, v2.3.2,
     v2.3.3, v2.7.0, v2.9.0

   - Reuse v2.3.2 post-init sequence for v2.4.0

  Renesas R-Car PCIe controller driver:

   - Remove unused static pcie_base and pcie_dev

  Rockchip PCIe controller driver:

   - Remove writes to unused registers

   - Write endpoint Device ID using correct register

   - Assert PCI Configuration Enable bit after probe so endpoint
     responds instead of generating Request Retry Status messages

   - Poll waiting for PHY PLLs to lock

   - Update RK3399 example DT binding to be valid

   - Use RK3399 PCIE_CLIENT_LEGACY_INT_CTRL to generate INTx instead of
     manually generating PCIe message

   - Use multiple windows to avoid address translation conflicts

   - Use u32 (not u16) when accessing 32-bit registers

   - Hide MSI-X Capability, since RK3399 can't generate MSI-X

   - Set endpoint controller required alignment to 256

  Synopsys DesignWare PCIe controller driver:

   - Wait for link to come up only if we've initiated link training

  Miscellaneous:

   - Add pci_clear_master() stub for non-CONFIG_PCI"

* tag 'pci-v6.5-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
  Documentation: PCI: correct spelling
  PCI: vmd: Fix uninitialized variable usage in vmd_enable_domain()
  PCI: xgene-msi: Convert to platform remove callback returning void
  PCI: tegra: Convert to platform remove callback returning void
  PCI: rockchip-host: Convert to platform remove callback returning void
  PCI: mvebu: Convert to platform remove callback returning void
  PCI: mt7621: Convert to platform remove callback returning void
  PCI: mediatek-gen3: Convert to platform remove callback returning void
  PCI: mediatek: Convert to platform remove callback returning void
  PCI: iproc: Convert to platform remove callback returning void
  PCI: hisi-error: Convert to platform remove callback returning void
  PCI: dwc: Convert to platform remove callback returning void
  PCI: j721e: Convert to platform remove callback returning void
  PCI: brcmstb: Convert to platform remove callback returning void
  PCI: altera-msi: Convert to platform remove callback returning void
  PCI: altera: Convert to platform remove callback returning void
  PCI: aardvark: Convert to platform remove callback returning void
  PCI: rcar: Use correct product family name for Renesas R-Car
  PCI: layerscape: Add the endpoint linkup notifier support
  PCI: endpoint: pci-epf-vntb: Fix typo in comments
  ...

Pull pin control updates from Linus Walleij:
 "No core changes this time

  New drivers:

   - Tegra234 support

   - Qualcomm IPQ5018 support

   - Intel Meteor Lake-S support

   - Qualcomm SDX75 subdriver

   - Qualcomm SPMI-based PM8953 support

  Improvements:

   - Fix up support for GPIO3 on the AXP209

   - Push-pull drive configuration support for the AT91 PIO4

   - Fix misc non-urgent bugs in the AMD driver

   - Misc non-urgent improved error handling

   - Misc janitorial and minor improvements"

* tag 'pinctrl-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (75 commits)
  pinctrl: cherryview: Drop goto label
  pinctrl: baytrail: invert if condition
  pinctrl: baytrail: add warning for BYT_VAL_REG retrieval failure
  pinctrl: baytrail: reduce scope of spinlock in ->dbg_show() hook
  pinctrl: tegra: avoid duplicate field initializers
  dt-bindings: pinctrl: qcom,sdx65-tlmm: add pcie_clkreq function
  pinctrl: mlxbf3: remove broken Kconfig 'select'
  pinctrl: spear: Remove unused of_gpio.h inclusion
  pinctrl: lantiq: Remove unused of_gpio.h inclusion
  pinctrl: at91-pio4: check return value of devm_kasprintf()
  pinctrl: microchip-sgpio: check return value of devm_kasprintf()
  pinctrl: freescale: Fix a memory out of bounds when num_configs is 1
  pinctrl: intel: refine ->irq_set_type() hook
  pinctrl: intel: refine ->set_mux() hook
  pinctrl: baytrail: Use str_hi_lo() helper
  lib/string_choices: Add str_high_low() helper
  lib/string_helpers: Split out string_choices.h
  lib/string_helpers: Add missing header files to MAINTAINERS database
  pinctrl: npcm7xx: Add missing check for ioremap
  pinctrl:sunplus: Add check for kmalloc
  ...

Merge tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver updates from Hans de Goede:
 "AMD PMC and PMF drivers:
   - Various bugfixes
   - Improved debugging support

  Intel PMC:
   - Refactor to support hw with multiple PMCs
   - Various other improvements / new hw support

  Intel Speed Select Technology (ISST):
   - TPMI Uncore Frequency + Cluster Level Power Controls
   - Various bugfixes
   - tools/intel-speed-select: Misc improvements

  Dell-DDV: Add documentation

  INT3472 ACPI camera sensor glue code:
   - Evaluate device's _DSM method to control imaging clock
   - Drop the need to have a table with per sensor-model info

  Lenovo Yogabook:
   - Refactor / rework to also support Android models

  Think-LMI:
   - Multiple improvements and fixes

  WMI:
   - Add proper API documentation for the WMI bus

  x86-android-tablets:
   - Misc new hw support

  Miscellaneous other cleanups / fixes"

* tag 'platform-drivers-x86-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (91 commits)
  platform/x86:intel/pmc: Add Meteor Lake IOE-M PMC related maps
  platform/x86:intel/pmc: Add Meteor Lake IOE-P PMC related maps
  platform/x86:intel/pmc: Use SSRAM to discover pwrm base address of primary PMC
  platform/x86:intel/pmc: Discover PMC devices
  platform/x86:intel/pmc: Enable debugfs multiple PMC support
  platform/x86:intel/pmc: Add support to handle multiple PMCs
  platform/x86:intel/pmc: Combine core_init() and core_configure()
  platform/x86:intel/pmc: Update maps for Meteor Lake P/M platforms
  platform/x86/intel: tpmi: Remove hardcoded unit and offset
  platform/x86: int3472: discrete: Log a warning if the pin-numbers don't match
  platform/x86: int3472: discrete: Use FIELD_GET() on the GPIO _DSM return value
  platform/x86: int3472: discrete: Add alternative "AVDD" regulator supply name
  platform/x86: int3472: discrete: Add support for 1 GPIO regulator shared between 2 sensors
  platform/x86: int3472: discrete: Remove sensor_config-s
  platform/x86: int3472: discrete: Drop GPIO remapping support
  platform/x86: apple-gmux: don't use be32_to_cpu and cpu_to_be32
  platform/x86/dell/dell-rbtn: Fix resources leaking on error path
  platform/x86: ISST: Fix usage counter
  platform/x86: ISST: Reset default callback on unregister
  platform/x86: int3472: Switch back to use struct i2c_driver's .probe()
  ...

Merge tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Update DM crypt to allocate compound pages if possible

 - Fix DM crypt target's crypt_ctr_cipher_new return value on invalid
   AEAD cipher

 - Fix DM flakey testing target's write bio corruption feature to
   corrupt the data of a cloned bio instead of the original

 - Add random_read_corrupt and random_write_corrupt features to DM
   flakey target

 - Fix ABBA deadlock in DM thin metadata by resetting associated bufio
   client rather than destroying and recreating it

 - A couple other small DM thinp cleanups

 - Update DM core to support disabling block core IO stats accounting
   and optimize away code that isn't needed if stats are disabled

 - Other small DM core cleanups

 - Improve DM integrity target to not require so much memory on 32 bit
   systems. Also only allocate the recalculate buffer as needed (and
   increasingly reduce its size on allocation failure)

 - Update DM integrity to use %*ph for printing hexdump of a small
   buffer. Also update DM integrity documentation

 - Various DM core ioctl interface hardening. Now more careful about
   alignment of structures and processing of input passed to the kernel
   from userspace.

   Also disallow the creation of DM devices named "control", "." or ".."

 - Eliminate GFP_NOIO workarounds for __vmalloc and kvmalloc in DM
   core's ioctl and bufio code

* tag 'for-6.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits)
  dm: get rid of GFP_NOIO workarounds for __vmalloc and kvmalloc
  dm integrity: scale down the recalculate buffer if memory allocation fails
  dm integrity: only allocate recalculate buffer when needed
  dm integrity: reduce vmalloc space footprint on 32-bit architectures
  dm ioctl: Refuse to create device named "." or ".."
  dm ioctl: Refuse to create device named "control"
  dm ioctl: Avoid double-fetch of version
  dm ioctl: structs and parameter strings must not overlap
  dm ioctl: Avoid pointer arithmetic overflow
  dm ioctl: Check dm_target_spec is sufficiently aligned
  Documentation: dm-integrity: Document an example of how the tunables relate.
  Documentation: dm-integrity: Document default values.
  Documentation: dm-integrity: Document the meaning of "buffer".
  Documentation: dm-integrity: Fix minor grammatical error.
  dm integrity: Use %*ph for printing hexdump of a small buffer
  dm thin: disable discards for thin-pool if no_discard_passdown
  dm: remove stale/redundant dm_internal_{suspend,resume} prototypes in dm.h
  dm: skip dm-stats work in alloc_io() unless needed
  dm: avoid needless dm_io access if all IO accounting is disabled
  dm: support turning off block-core's io stats accounting
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi,
  lpfc, qla2xxx).

  We have a couple of major core changes impacting other systems:

   - Command Duration Limits, which spills into block and ATA

   - block level Persistent Reservation Operations, which touches block,
     nvme, target and dm

  Both of these are added with merge commits containing a cover letter
  explaining what's going on"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits)
  scsi: core: Improve warning message in scsi_device_block()
  scsi: core: Replace scsi_target_block() with scsi_block_targets()
  scsi: core: Don't wait for quiesce in scsi_device_block()
  scsi: core: Don't wait for quiesce in scsi_stop_queue()
  scsi: core: Merge scsi_internal_device_block() and device_block()
  scsi: sg: Increase number of devices
  scsi: bsg: Increase number of devices
  scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
  scsi: ufs: ufs-pci: Add support for Intel Arrow Lake
  scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT
  scsi: ufs: wb: Add explicit flush_threshold sysfs attribute
  scsi: ufs: ufs-qcom: Switch to the new ICE API
  scsi: ufs: dt-bindings: qcom: Add ICE phandle
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk
  scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC
  scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR
  scsi: ufs: core: Remove dedicated hwq for dev command
  scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command
  scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes
  ...

Pull ata updates from Damien Le Moal:

 - Add support for the .remove_new callback to the ata_platform code to
   simplify device removal interface (Uwe)

 - Code simplification in ata_dev_revalidate() (Yahu)

 - Fix code indentation and coding style in the pata_parport protocol
   modules to avoid warnings from static code analyzers (me)

 - Clarify ata_eh_qc_retry() behavior with better comments (Niklas)

 - Simplify and improve ata_change_queue_depth() behavior to have a
   consistent behavior between libsas managed devices and libata managed
   devices (e.g. AHCI connected devices) (me)

 - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled()
   and ata_ncq_supported() helpers instead of open coding flags tests
   (me)

 - Cleanup ahci_reset_controller() code (me)

 - Change the pata_octeon_cf and sata_svw drivers to use
   of_property_read_reg() to simplify the code (Rob, me)

 - Remove unnecessary include files from ahci_octeon driver (me)

 - Modify the DesignWare ahci dt bindings to add support for the
   Rockchip RK3588 AHCI (Sebastian)

* tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits)
  dt-bindings: phy: rockchip: rk3588 has two reset lines
  dt-bindings: ata: dwc-ahci: add Rockchip RK3588
  dt-bindings: ata: dwc-ahci: add PHY clocks
  ata: ahci_octeon: Remove unnecessary include
  ata: pata_octeon_cf: Add missing header include
  ata: ahci: Cleanup ahci_reset_controller()
  ata: Use of_property_read_reg() to parse "reg"
  ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config()
  ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down()
  ata: libata-sata: Improve ata_change_queue_depth()
  ata: libata-sata: Simplify ata_change_queue_depth()
  ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site
  ata: pata_parport: Fix on26 module code indentation and style
  ata: pata_parport: Fix on20 module code indentation and style
  ata: pata_parport: Fix ktti module code indentation and style
  ata: pata_parport: Fix kbic module code indentation and style
  ata: pata_parport: Fix friq module code indentation and style
  ata: pata_parport: Fix fit3 module code indentation and style
  ata: pata_parport: Fix fit2 module code indentation and style
  ata: pata_parport: Fix epia module code indentation and style
  ...

Merge tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next

Pull perf tools updates from Namhyung Kim:
 "Internal cleanup:

   - Refactor PMU data management to handle hybrid systems in a generic
     way.

     Do more work in the lexer so that legacy event types parse more
     easily. A side-effect of this is that if a PMU is specified,
     scanning sysfs is avoided improving start-up time.

   - Fix hybrid metrics, for example, the TopdownL1 works for both
     performance and efficiency cores on Intel machines. To support
     this, sort and regroup events after parsing.

   - Add reference count checking for the 'thread' data structure.

   - Lots of fixes for memory leaks in various places thanks to the ASAN
     and Ian's refcount checker.

   - Reduce the binary size by replacing static variables with local or
     dynamically allocated memory.

   - Introduce shared_mutex for annotate data to reduce memory
     footprint.

   - Make filesystem access library functions more thread safe.

  Test:

   - Organize cpu_map tests into a single suite.

   - Add metric value validation test to check if the values are within
     correct value ranges.

   - Add perf stat stdio output test to check if event and metric names
     match.

   - Add perf data converter JSON output test.

   - Fix a lot of issues reported by shellcheck(1). This is a
     preparation to enable shellcheck by default.

   - Make the large x86 new instructions test optional at build time
     using EXTRA_TESTS=1.

   - Add a test for libpfm4 events.

  perf script:

   - Add 'dsoff' outpuf field to display offset from the DSO.

      $ perf script -F comm,pid,event,ip,dsoff
         ls 2695501 cycles:      152cc73ef4b5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so+0x1c4b5)
         ls 2695501 cycles:  ffffffff99045b3e ([kernel.kallsyms])
         ls 2695501 cycles:  ffffffff9968e107 ([kernel.kallsyms])
         ls 2695501 cycles:  ffffffffc1f54afb ([kernel.kallsyms])
         ls 2695501 cycles:  ffffffff9968382f ([kernel.kallsyms])
         ls 2695501 cycles:  ffffffff99e00094 ([kernel.kallsyms])
         ls 2695501 cycles:      152cc718a8d0 (/usr/lib/x86_64-linux-gnu/libselinux.so.1+0x68d0)
         ls 2695501 cycles:  ffffffff992a6db0 ([kernel.kallsyms])

   - Adjust width for large PID/TID values.

  perf report:

   - Robustify reading addr2line output for srcline by checking sentinel
     output before the actual data and by using timeout of 1 second.

   - Allow config terms (like 'name=ABC') with breakpoint events.

      $ perf record -e mem:0x55feb98dd169:x/name=breakpoint/ -p 19646 -- sleep 1

  perf annotate:

   - Handle x86 instruction suffix like 'l' in 'movl' generally.

   - Parse instruction operands properly even with a whitespace. This is
     needed for llvm-objdump output.

   - Support RISC-V binutils lookup using the triplet prefixes.

   - Add '<' and '>' key to navigate to prev/next symbols in TUI.

   - Fix instruction association and parsing for LoongArch.

  perf stat:

   - Add --per-cache aggregation option, optionally specify a cache
     level like `--per-cache=L2`.

      $ sudo perf stat --per-cache -a -e ls_dmnd_fills_from_sys.ext_cache_remote --\
        taskset -c 0-15,64-79,128-143,192-207\
        perf bench sched messaging -p -t -l 100000 -g 8

        # Running 'sched/messaging' benchmark:
        # 20 sender and receiver threads per group
        # 8 groups == 320 threads run

        Total time: 7.648 [sec]

        Performance counter stats for 'system wide':

        S0-D0-L3-ID0             16         17,145,912      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID8             16         14,977,628      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID16            16            262,539      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID24            16              3,140      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID32            16             27,403      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID40            16             17,026      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID48            16              7,292      ls_dmnd_fills_from_sys.ext_cache_remote
        S0-D0-L3-ID56            16              2,464      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID64            16         22,489,306      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID72            16         21,455,257      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID80            16             11,619      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID88            16             30,978      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID96            16             37,628      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID104           16             13,594      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID112           16             10,164      ls_dmnd_fills_from_sys.ext_cache_remote
        S1-D1-L3-ID120           16             11,259      ls_dmnd_fills_from_sys.ext_cache_remote

              7.779171484 seconds time elapsed

   - Change default (no event/metric) formatting for default metrics so
     that events are hidden and the metric and group appear.

       Performance counter stats for 'ls /':

                    1.85 msec task-clock                       #    0.594 CPUs utilized
                       0      context-switches                 #    0.000 /sec
                       0      cpu-migrations                   #    0.000 /sec
                      97      page-faults                      #   52.517 K/sec
               2,187,173      cycles                           #    1.184 GHz
               2,474,459      instructions                     #    1.13  insn per cycle
                 531,584      branches                         #  287.805 M/sec
                  13,626      branch-misses                    #    2.56% of all branches
                              TopdownL1                 #     23.5 %  tma_backend_bound
                                                        #     11.5 %  tma_bad_speculation
                                                        #     39.1 %  tma_frontend_bound
                                                        #     25.9 %  tma_retiring

   - Allow --cputype option to have any PMU name (not just hybrid).

   - Fix output value not to added when it runs multiple times with -r
     option.

  perf list:

   - Show metricgroup description from JSON file called
     metricgroups.json.

   - Allow 'pfm' argument to list only libpfm4 events and check each
     event is supported before showing it.

  JSON vendor events:

   - Avoid event grouping using "NO_GROUP_EVENTS" constraints. The
     topdown events are correctly grouped even if no group exists.

   - Add "Default" metric group to print it in the default output. And
     use "DefaultMetricgroupName" to indicate the real metric group
     name.

   - Add AmpereOne core PMU events.

  Misc:

   - Define man page date correctly.

   - Track exception level properly on ARM CoreSight ETM.

   - Allow anonymous struct, union or enum when retrieving type names
     from DWARF.

   - Fix incorrect filename when calling `perf inject --jit`.

   - Handle PLT size correctly on LoongArch"

* tag 'perf-tools-for-v6.5-1-2023-06-28' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools-next: (269 commits)
  perf test: Skip metrics w/o event name in stat STD output linter
  perf test: Reorder event name checks in stat STD output linter
  perf pmu: Remove a hard coded cpu PMU assumption
  perf pmus: Add notion of default PMU for JSON events
  perf unwind: Fix map reference counts
  perf test: Set PERF_EXEC_PATH for script execution
  perf script: Initialize buffer for regs_map()
  perf tests: Fix test_arm_callgraph_fp variable expansion
  perf symbol: Add LoongArch case in get_plt_sizes()
  perf test: Remove x permission from lib/stat_output.sh
  perf test: Rerun failed metrics with longer workload
  perf test: Add skip list for metrics known would fail
  perf test: Add metric value validation test
  perf jit: Fix incorrect file name in DWARF line table
  perf annotate: Fix instruction association and parsing for LoongArch
  perf annotation: Switch lock from a mutex to a sharded_mutex
  perf sharded_mutex: Introduce sharded_mutex
  tools: Fix incorrect calculation of object size by sizeof
  perf subcmd: Fix missing check for return value of malloc() in add_cmdname()
  perf parse-events: Remove unneeded semicolon
  ...

Pull probes updates from Masami Hiramatsu:

 - fprobe: Pass return address to the fprobe entry/exit callbacks so
   that the callbacks don't need to analyze pt_regs/stack to find the
   function return address.

 - kprobe events: cleanup usage of TPARG_FL_FENTRY and TPARG_FL_RETURN
   flags so that those are not set at once.

 - fprobe events:
      - Add a new fprobe events for tracing arbitrary function entry and
        exit as a trace event.
      - Add a new tracepoint events for tracing raw tracepoint as a
        trace event. This allows user to trace non user-exposed
        tracepoints.
      - Move eprobe's event parser code into probe event common file.
      - Introduce BTF (BPF type format) support to kernel probe (kprobe,
        fprobe and tracepoint probe) events so that user can specify
        traced function arguments by name. This also applies the type of
        argument when fetching the argument.
      - Introduce '$arg*' wildcard support if BTF is available. This
        expands the '$arg*' meta argument to all function argument
        automatically.
      - Check the return value types by BTF. If the function returns
        'void', '$retval' is rejected.
      - Add some selftest script for fprobe events, tracepoint events
        and BTF support.
      - Update documentation about the fprobe events.
      - Some fixes for above features, document and selftests.

 - selftests for ftrace (in addition to the new fprobe events):
      - Add a test case for multiple consecutive probes in a function
        which checks if ftrace based kprobe, optimized kprobe and normal
        kprobe can be defined in the same target function.
      - Add a test case for optimized probe, which checks whether kprobe
        can be optimized or not.

* tag 'probes-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix tracepoint event with $arg* to fetch correct argument
  Documentation: Fix typo of reference file name
  tracing/probes: Fix to return NULL and keep using current argc
  selftests/ftrace: Add new test case which checks for optimized probes
  selftests/ftrace: Add new test case which adds multiple consecutive probes in a function
  Documentation: tracing/probes: Add fprobe event tracing document
  selftests/ftrace: Add BTF arguments test cases
  selftests/ftrace: Add tracepoint probe test case
  tracing/probes: Add BTF retval type support
  tracing/probes: Add $arg* meta argument for all function args
  tracing/probes: Support function parameters if BTF is available
  tracing/probes: Move event parameter fetching code to common parser
  tracing/probes: Add tracepoint support on fprobe_events
  selftests/ftrace: Add fprobe related testcases
  tracing/probes: Add fprobe events for tracing function entry and exit.
  tracing/probes: Avoid setting TPARG_FL_FENTRY and TPARG_FL_RETURN
  fprobe: Pass return address to the handlers

Pull tracing updates from Steven Rostedt:

 - Add new feature to have function graph tracer record the return
   value. Adds a new option: funcgraph-retval ; when set, will show the
   return value of a function in the function graph tracer.

 - Also add the option: funcgraph-retval-hex where if it is not set, and
   the return value is an error code, then it will return the decimal of
   the error code, otherwise it still reports the hex value.

 - Add the file /sys/kernel/tracing/osnoise/per_cpu/cpu<cpu>/timerlat_fd
   That when a application opens it, it becomes the task that the timer
   lat tracer traces. The application can also read this file to find
   out how it's being interrupted.

 - Add the file /sys/kernel/tracing/available_filter_functions_addrs
   that works just the same as available_filter_functions but also shows
   the addresses of the functions like kallsyms, except that it gives
   the address of where the fentry/mcount jump/nop is. This is used by
   BPF to make it easier to attach BPF programs to ftrace hooks.

 - Replace strlcpy with strscpy in the tracing boot code.

* tag 'trace-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Fix warnings when building htmldocs for function graph retval
  riscv: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
  tracing/boot: Replace strlcpy with strscpy
  tracing/timerlat: Add user-space interface
  tracing/osnoise: Skip running osnoise if all instances are off
  tracing/osnoise: Switch from PF_NO_SETAFFINITY to migrate_disable
  ftrace: Show all functions with addresses in available_filter_functions_addrs
  selftests/ftrace: Add funcgraph-retval test case
  LoongArch: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
  x86/ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
  arm64: ftrace: Enable HAVE_FUNCTION_GRAPH_RETVAL
  tracing: Add documentation for funcgraph-retval and funcgraph-retval-hex
  function_graph: Support recording and printing the return value of function
  fgraph: Add declaration of "struct fgraph_ret_regs"

Pull RISC-V updates from Palmer Dabbelt:

 - Support for ACPI

 - Various cleanups to the ISA string parsing, including making them
   case-insensitive

 - Support for the vector extension

 - Support for independent irq/softirq stacks

 - Our CPU DT binding now has "unevaluatedProperties: false"

* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
  riscv: hibernate: remove WARN_ON in save_processor_state
  dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
  dt-bindings: riscv: cpus: add a ref the common cpu schema
  riscv: stack: Add config of thread stack size
  riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
  RISC-V: always report presence of extensions formerly part of the base ISA
  dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
  RISC-V: remove decrement/increment dance in ISA string parser
  RISC-V: rework comments in ISA string parser
  RISC-V: validate riscv,isa at boot, not during ISA string parsing
  RISC-V: split early & late of_node to hartid mapping
  RISC-V: simplify register width check in ISA string parsing
  perf: RISC-V: Limit the number of counters returned from SBI
  riscv: replace deprecated scall with ecall
  riscv: uprobes: Restore thread.bad_cause
  riscv: mm: try VMA lock-based page fault handling first
  riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
  RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
  RISC-V: Track ISA extensions per hart
  ...