- 08 Mar, 2019 18 commits
-
-
Litao Jiao authored
vxlan_cleanup() is a timer callback, it is already and only running in BH context. Signed-off-by: Litao Jiao <jiaolitao@raisecom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
HW can not guarantee complete write desc->rx.size, even though HNS3_RXD_VLD_B has been set. Driver needs to add dma_rmb() instruction to make sure desc->rx.size is always valid. Fixes: e5597095 ("net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI poll") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
This patch adds missing documentation for some inline functions on linux/skbuff.h. The patch is incomplete and a lot more can be added, just wondering if it's of interest of the netdev developers. Also fixed some whitespaces. Signed-off-by: Pedro Tammela <pctammela@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Christophe Roullier says: ==================== stmmac: add some fixes for stm32 For common stmmac: - Add support to set CSR Clock range selection in DT For stm32mpu: - Glue codes to support magic packet - Glue codes to support all PHY config : PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config For stm32mcu: - Add Ethernet support for stm32h7 Changes in V3: - Reverse for syscfg management because it is manage by these patches https://lkml.org/lkml/2018/12/12/133 https://lkml.org/lkml/2018/12/12/134 https://lkml.org/lkml/2018/12/12/131 https://lkml.org/lkml/2018/12/12/132 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Synopsys GMAC 4.10 is used. And Phy mode for eval and disco is RMII with PHY SMSC LAN8742 Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Syscfg clock is no more needed. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
In Documentation stmmac.txt there is possibility to fixed CSR Clock range selection with property clk_csr. This patch add the management of this property For example to use it, add in your ethernet node DT: clk_csr = <3>; Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Add properties to support all Phy config PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Update glue codes to support all PHY config on stm32mp157c PHY_MODE (MII,GMII, RMII, RGMII) and in normal, PHY wo crystal (25Mhz), PHY wo crystal (50Mhz), No 125Mhz from PHY config. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe Roullier authored
Add glue codes to support magic packet on stm32mp157c Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Xin Long says: ==================== sctp: process the error returned from sctp_sock_migrate() This patchset is to process the errs returned by sctp_auth_init_hmacs() and sctp_bind_addr_dup() from sctp_sock_migrate(). And also fix a panic caused by new ep->auth_hmacs was not set due to net->sctp.auth_enable changed by sysctl before accepting an assoc. ==================== Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
New ep's auth_hmacs should be set if old ep's is set, in case that net->sctp.auth_enable has been changed to 0 by users and new ep's auth_hmacs couldn't be set in sctp_endpoint_init(). It can even crash kernel by doing: 1. on server: sysctl -w net.sctp.auth_enable=1, sysctl -w net.sctp.addip_enable=1, sysctl -w net.sctp.addip_noauth_enable=0, listen() on server, sysctl -w net.sctp.auth_enable=0. 2. on client: connect() to server. 3. on server: accept() the asoc, sysctl -w net.sctp.auth_enable=1. 4. on client: send() asconf packet to server. The call trace: [ 245.280251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 [ 245.286872] RIP: 0010:sctp_auth_calculate_hmac+0xa3/0x140 [sctp] [ 245.304572] Call Trace: [ 245.305091] <IRQ> [ 245.311287] sctp_sf_authenticate+0x110/0x160 [sctp] [ 245.312311] sctp_sf_eat_auth+0xf2/0x230 [sctp] [ 245.313249] sctp_do_sm+0x9a/0x2d0 [sctp] [ 245.321483] sctp_assoc_bh_rcv+0xed/0x1a0 [sctp] [ 245.322495] sctp_rcv+0xa66/0xc70 [sctp] It's because the old ep->auth_hmacs wasn't copied to the new ep while ep->auth_hmacs is used in sctp_auth_calculate_hmac() when processing the incoming auth chunks, and it should have been done when migrating sock. Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
sctp_auth_init_hmacs() is called only when ep->auth_enable is set. It better to move up sctp_auth_init_hmacs() and remove auth_enable check in it and check auth_enable only once in sctp_endpoint_init(). Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
It should fail to create the new sk if sctp_bind_addr_dup() fails when accepting or peeloff an association. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
If we receive a packet while deleting a VXLAN device, there's a chance vxlan_rcv() is called at the same time as vxlan_dellink(). This is fine, except that vxlan_dellink() should never ever touch stuff that's still in use, such as the GRO cells list. Otherwise, vxlan_rcv() crashes while queueing packets via gro_cells_receive(). Move the gro_cells_destroy() to vxlan_uninit(), which runs after the RCU grace period is elapsed and nothing needs the gro_cells anymore. This is now done in the same way as commit 8e816df8 ("geneve: Use GRO cells infrastructure.") originally implemented for GENEVE. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 58ce31cc ("vxlan: GRO support at tunnel layer") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
rxrpc_disconnect_client_call() reads the call's connection ID protocol value (call->cid) as part of that function's variable declarations. This is bad because it's not inside the locked section and so may race with someone granting use of the channel to the call. This manifests as an assertion failure (see below) where the call in the presumed channel (0 because call->cid wasn't set when we read it) doesn't match the call attached to the channel we were actually granted (if 1, 2 or 3). Fix this by moving the read and dependent calculations inside of the channel_lock section. Also, only set the channel number and pointer variables if cid is not zero (ie. unset). This problem can be induced by injecting an occasional error in rxrpc_wait_for_channel() before the call to schedule(). Make two further changes also: (1) Add a trace for wait failure in rxrpc_connect_call(). (2) Drop channel_lock before BUG'ing in the case of the assertion failure. The failure causes a trace akin to the following: rxrpc: Assertion failed - 18446612685268945920(0xffff8880beab8c00) == 18446612685268621312(0xffff8880bea69800) is false ------------[ cut here ]------------ kernel BUG at net/rxrpc/conn_client.c:824! ... RIP: 0010:rxrpc_disconnect_client_call+0x2bf/0x99d ... Call Trace: rxrpc_connect_call+0x902/0x9b3 ? wake_up_q+0x54/0x54 rxrpc_new_client_call+0x3a0/0x751 ? rxrpc_kernel_begin_call+0x141/0x1bc ? afs_alloc_call+0x1b5/0x1b5 rxrpc_kernel_begin_call+0x141/0x1bc afs_make_call+0x20c/0x525 ? afs_alloc_call+0x1b5/0x1b5 ? __lock_is_held+0x40/0x71 ? lockdep_init_map+0xaf/0x193 ? lockdep_init_map+0xaf/0x193 ? __lock_is_held+0x40/0x71 ? yfs_fs_fetch_data+0x33b/0x34a yfs_fs_fetch_data+0x33b/0x34a afs_fetch_data+0xdc/0x3b7 afs_read_dir+0x52d/0x97f afs_dir_iterate+0xa0/0x661 ? iterate_dir+0x63/0x141 iterate_dir+0xa2/0x141 ksys_getdents64+0x9f/0x11b ? filldir+0x111/0x111 ? do_syscall_64+0x3e/0x1a0 __x64_sys_getdents64+0x16/0x19 do_syscall_64+0x7d/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 45025bce ("rxrpc: Improve management and caching of client connection objects") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
syzbot reported a NULL-ptr deref caused by that sched->init() in sctp_stream_init() set stream->rr_next = NULL. kasan: GPF could be caused by NULL-ptr deref or user memory access RIP: 0010:sctp_sched_rr_dequeue+0xd3/0x170 net/sctp/stream_sched_rr.c:141 Call Trace: sctp_outq_dequeue_data net/sctp/outqueue.c:90 [inline] sctp_outq_flush_data net/sctp/outqueue.c:1079 [inline] sctp_outq_flush+0xba2/0x2790 net/sctp/outqueue.c:1205 All sched info is saved in sout->ext now, in sctp_stream_init() sctp_stream_alloc_out() will not change it, there's no need to call sched->init() again, since sctp_outq_init() has already done it. Fixes: 5bbbbe32 ("sctp: introduce stream scheduler foundations") Reported-by: syzbot+4c9934f20522c0efd657@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
The race occurs in __mkroute_output() when 2 threads lookup a dst: CPU A CPU B find_exception() find_exception() [fnhe expires] ip_del_fnhe() [fnhe is deleted] rt_bind_exception() In rt_bind_exception() it will bind a deleted fnhe with the new dst, and this dst will get no chance to be freed. It causes a dev defcnt leak and consecutive dmesg warnings: unregister_netdevice: waiting for ethX to become free. Usage count = 1 Especially thanks Jon to identify the issue. This patch fixes it by setting fnhe_daddr to 0 in ip_del_fnhe() to stop binding the deleted fnhe with a new dst when checking fnhe's fnhe_daddr and daddr in rt_bind_exception(). It works as both ip_del_fnhe() and rt_bind_exception() are protected by fnhe_lock and the fhne is freed by kfree_rcu(). Fixes: deed49df ("route: check and remove route cache when we get route") Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 07 Mar, 2019 12 commits
-
-
Eric Dumazet authored
syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dirk van der Merwe authored
The simple vNIC mailbox length should be 12 decimal and not 0x12. Using a decimal also makes it clear this is a length value and not another field within the simple mailbox defines. Found by code inspection, there are no known firmware configurations where this would cause issues. Fixes: 527d7d1b ("nfp: read mailbox address from TLV caps") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
I removed compat's universal assignment to 0, which allows this if statement to fall through when compat is passed with a value other than 0. Fixes: f9d19a74 ("net: atm: Use IS_ENABLED in atm_dev_ioctl") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:495:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:532:3: warning: variable 'ns' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:741:3: warning: variable 'sec_inc' is used uninitialized whenever '&&' condition is false [-Wsometimes-uninitialized] Clang is concerned with the use of stmmac_do_void_callback (which stmmac_get_timestamp and stmmac_config_sub_second_increment wrap), as it may fail to initialize these values if the if condition was ever false (meaning the callbacks don't exist). It's not wrong because the callbacks (get_timestamp and config_sub_second_increment respectively) are the ones that initialize the variables. While it's unlikely that the callbacks are ever going to disappear and make that condition false, we can easily avoid this warning by zero initialize the variables. Link: https://github.com/ClangBuiltLinux/linux/issues/384Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
When building with -Wsometimes-uninitialized, Clang warns: net/atm/resources.c:256:6: warning: variable 'number' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] net/atm/resources.c:212:7: warning: variable 'iobuf_len' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] Clang won't realize that compat is 0 when CONFIG_COMPAT is not set until the constant folding stage, which happens after this semantic analysis. Use IS_ENABLED instead so that the zero is present at the semantic analysis stage, which eliminates this warning. Link: https://github.com/ClangBuiltLinux/linux/issues/386Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
clang inlines the dev_ethtool() more aggressively than gcc does, leading to a larger amount of used stack space: net/core/ethtool.c:2536:24: error: stack frame size of 1216 bytes in function 'dev_ethtool' [-Werror,-Wframe-larger-than=] Marking the sub-functions that require the most stack space as noinline_for_stack gives us reasonable behavior on all compilers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The enic driver relies on the CONFIG_CPUMASK_OFFSTACK feature to dynamically allocate a struct member, but this is normally intended for local variables. Building with clang, I get a warning for a few locations that check the address of the cpumask_var_t: drivers/net/ethernet/cisco/enic/enic_main.c:122:22: error: address of array 'enic->msix[i].affinity_mask' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] As far as I can tell, the code is still correct, as the truth value of the pointer is what we need in this configuration. To get rid of the warning, use cpumask_available() instead of checking the pointer directly. Fixes: 322cf7e3 ("enic: assign affinity hint to interrupts") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Clang points out undefined behavior when building the pcan_usb_pro driver: drivers/net/can/usb/peak_usb/pcan_usb_pro.c:136:15: error: passing an object that undergoes default argument promotion to 'va_start' has undefined behavior [-Werror,-Wvarargs] Changing the function prototype to avoid argument promotion in the varargs call avoids the warning, and should make this well-defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Masaru Nagai authored
Hardware has the CBS (Credit Based Shaper) which affects only Q3 and Q2. When updating the CBS settings, even if the driver does so after waiting for Tx DMA finished, there is a possibility that frame data still remains in TxFIFO. To avoid this, decrease TxFIFO depth of Q3 and Q2 to one. This patch has been exercised this using netperf TCP_MAERTS, TCP_STREAM and UDP_STREAM tests run on an Ebisu board. No performance change was detected, outside of noise in the tests, both in terms of throughput and CPU utilisation. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [simon: updated changelog] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
clang has spotted an ancient code bug and warns about it with: drivers/isdn/isdnloop/isdnloop.c:573:12: error: address of array 'card->rcard' will always evaluate to 'true' [-Werror,-Wpointer-bool-conversion] This is an array of pointers, so we should check if a specific pointer exists in the array before using it, not whether the array itself exists. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
clang warns about what seems to be an unintended use of an obscure C language feature where a forward declaration of an array remains usable when the final definition is never seen: drivers/net/ethernet/ti/davinci_emac.c:1694:34: error: tentative array definition assumed to have one element [-Werror] static const struct of_device_id davinci_emac_of_match[]; There is no harm in always enabling the device tree matching code here, and it makes the code behave in a more conventional way aside from avoiding the warning. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Mar, 2019 9 commits
-
-
Soheil Hassas Yeganeh authored
Returning 0 as inq to userspace indicates there is no more data to read, and the application needs to wait for EPOLLIN. For a connection that has received FIN from the remote peer, however, the application must continue reading until getting EOF (return value of 0 from tcp_recvmsg) or an error, if edge-triggered epoll (EPOLLET) is being used. Otherwise, the application will never receive a new EPOLLIN, since there is no epoll edge after the FIN. Return 1 when there is no data left on the queue but the connection has received FIN, so that the applications continue reading. Fixes: b75eba76 (tcp: send in-queue bytes in cmsg upon read) Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to add port, it directly returns res and forgets to free the node that allocated in hsr_create_self_node(), and forgets to delete the node->mac_list linked in hsr->self_node_db. BUG: memory leak unreferenced object 0xffff8881cfa0c780 (size 64): comm "syz-executor.0", pid 2077, jiffies 4294717969 (age 2415.377s) hex dump (first 32 bytes): e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................ 00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I............. backtrace: [<00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr] [<000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr] [<000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182 [<000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240 [<00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130 [<000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477 [<00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] [<00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336 [<000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917 [<0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline] [<0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631 [<00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786 [<00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline] [<00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline] [<00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794 [<00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 [<00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000e01dacb3>] 0xffffffffffffffff Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
When adding new filter to flower classifier, fl_change() inserts it to handle_idr before initializing filter extensions and assigning it a mask. Normally this ordering doesn't matter because all flower classifier ops callbacks assume rtnl lock protection. However, when filter has an action that doesn't have its kernel module loaded, rtnl lock is released before call to request_module(). During this time the filter can be accessed bu concurrent task before its initialization is completed, which can lead to a crash. Example case of NULL pointer dereference in concurrent dump: Task 1 Task 2 tc_new_tfilter() fl_change() idr_alloc_u32(fnew) fl_set_parms() tcf_exts_validate() tcf_action_init() tcf_action_init_1() rtnl_unlock() request_module() ... rtnl_lock() tc_dump_tfilter() tcf_chain_dump() fl_walk() idr_get_next_ul() tcf_node_dump() tcf_fill_node() fl_dump() mask = &f->mask->key; <- NULL ptr rtnl_lock() Extension initialization and mask assignment don't depend on fnew->handle that is allocated by idr_alloc_u32(). Move idr allocation code after action creation and mask assignment in fl_change() to prevent concurrent access to not fully initialized filter when rtnl lock is released to load action module. Fixes: 01683a14 ("net: sched: refactor flower walk to iterate over idr") Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
sendpage was not designed for processing of the Slab pages, in some situations it can trigger BUG_ON on receiving side. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
Add the path names here so that git-send-email can pick up the netdev@vger.kernel.org Cc line automatically for a patch that only touches the headers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
A bugfix just broke compilation of appletalk when CONFIG_SYSCTL is disabled: In file included from net/appletalk/ddp.c:65: net/appletalk/ddp.c: In function 'atalk_init': include/linux/atalk.h:164:34: error: expected expression before 'do' #define atalk_register_sysctl() do { } while(0) ^~ net/appletalk/ddp.c:1934:7: note: in expansion of macro 'atalk_register_sysctl' rc = atalk_register_sysctl(); This is easier to avoid by using conventional inline functions as stubs rather than macros. The header already has inline functions for other purposes, so I'm changing over all the macros for consistency. Fixes: 6377f787 ("appletalk: Fix use-after-free in atalk_proc_exit") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alan Maguire authored
Naresh Kamboju noted the following oops during execution of selftest tools/testing/selftests/bpf/test_tunnel.sh on x86_64: [ 274.120445] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 274.128285] #PF error: [INSTR] [ 274.131351] PGD 8000000414a0e067 P4D 8000000414a0e067 PUD 3b6334067 PMD 0 [ 274.138241] Oops: 0010 [#1] SMP PTI [ 274.141734] CPU: 1 PID: 11464 Comm: ping Not tainted 5.0.0-rc4-next-20190129 #1 [ 274.149046] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 274.156526] RIP: 0010: (null) [ 274.160280] Code: Bad RIP value. [ 274.163509] RSP: 0018:ffffbc9681f83540 EFLAGS: 00010286 [ 274.168726] RAX: 0000000000000000 RBX: ffffdc967fa80a18 RCX: 0000000000000000 [ 274.175851] RDX: ffff9db2ee08b540 RSI: 000000000000000e RDI: ffffdc967fa809a0 [ 274.182974] RBP: ffffbc9681f83580 R08: ffff9db2c4d62690 R09: 000000000000000c [ 274.190098] R10: 0000000000000000 R11: ffff9db2ee08b540 R12: ffff9db31ce7c000 [ 274.197222] R13: 0000000000000001 R14: 000000000000000c R15: ffff9db3179cf400 [ 274.204346] FS: 00007ff4ae7c5740(0000) GS:ffff9db31fa80000(0000) knlGS:0000000000000000 [ 274.212424] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 274.218162] CR2: ffffffffffffffd6 CR3: 00000004574da004 CR4: 00000000003606e0 [ 274.225292] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 274.232416] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 274.239541] Call Trace: [ 274.241988] ? tnl_update_pmtu+0x296/0x3b0 [ 274.246085] ip_md_tunnel_xmit+0x1bc/0x520 [ 274.250176] gre_fb_xmit+0x330/0x390 [ 274.253754] gre_tap_xmit+0x128/0x180 [ 274.257414] dev_hard_start_xmit+0xb7/0x300 [ 274.261598] sch_direct_xmit+0xf6/0x290 [ 274.265430] __qdisc_run+0x15d/0x5e0 [ 274.269007] __dev_queue_xmit+0x2c5/0xc00 [ 274.273011] ? dev_queue_xmit+0x10/0x20 [ 274.276842] ? eth_header+0x2b/0xc0 [ 274.280326] dev_queue_xmit+0x10/0x20 [ 274.283984] ? dev_queue_xmit+0x10/0x20 [ 274.287813] arp_xmit+0x1a/0xf0 [ 274.290952] arp_send_dst.part.19+0x46/0x60 [ 274.295138] arp_solicit+0x177/0x6b0 [ 274.298708] ? mod_timer+0x18e/0x440 [ 274.302281] neigh_probe+0x57/0x70 [ 274.305684] __neigh_event_send+0x197/0x2d0 [ 274.309862] neigh_resolve_output+0x18c/0x210 [ 274.314212] ip_finish_output2+0x257/0x690 [ 274.318304] ip_finish_output+0x219/0x340 [ 274.322314] ? ip_finish_output+0x219/0x340 [ 274.326493] ip_output+0x76/0x240 [ 274.329805] ? ip_fragment.constprop.53+0x80/0x80 [ 274.334510] ip_local_out+0x3f/0x70 [ 274.337992] ip_send_skb+0x19/0x40 [ 274.341391] ip_push_pending_frames+0x33/0x40 [ 274.345740] raw_sendmsg+0xc15/0x11d0 [ 274.349403] ? __might_fault+0x85/0x90 [ 274.353151] ? _copy_from_user+0x6b/0xa0 [ 274.357070] ? rw_copy_check_uvector+0x54/0x130 [ 274.361604] inet_sendmsg+0x42/0x1c0 [ 274.365179] ? inet_sendmsg+0x42/0x1c0 [ 274.368937] sock_sendmsg+0x3e/0x50 [ 274.372460] ___sys_sendmsg+0x26f/0x2d0 [ 274.376293] ? lock_acquire+0x95/0x190 [ 274.380043] ? __handle_mm_fault+0x7ce/0xb70 [ 274.384307] ? lock_acquire+0x95/0x190 [ 274.388053] ? __audit_syscall_entry+0xdd/0x130 [ 274.392586] ? ktime_get_coarse_real_ts64+0x64/0xc0 [ 274.397461] ? __audit_syscall_entry+0xdd/0x130 [ 274.401989] ? trace_hardirqs_on+0x4c/0x100 [ 274.406173] __sys_sendmsg+0x63/0xa0 [ 274.409744] ? __sys_sendmsg+0x63/0xa0 [ 274.413488] __x64_sys_sendmsg+0x1f/0x30 [ 274.417405] do_syscall_64+0x55/0x190 [ 274.421064] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 274.426113] RIP: 0033:0x7ff4ae0e6e87 [ 274.429686] Code: 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 80 00 00 00 00 8b 05 ca d9 2b 00 48 63 d2 48 63 ff 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 53 48 89 f3 48 83 ec 10 48 89 7c 24 08 [ 274.448422] RSP: 002b:00007ffcd9b76db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 274.455978] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 00007ff4ae0e6e87 [ 274.463104] RDX: 0000000000000000 RSI: 00000000006092e0 RDI: 0000000000000003 [ 274.470228] RBP: 0000000000000000 R08: 00007ffcd9bc40a0 R09: 00007ffcd9bc4080 [ 274.477349] R10: 000000000000060a R11: 0000000000000246 R12: 0000000000000003 [ 274.484475] R13: 0000000000000016 R14: 00007ffcd9b77fa0 R15: 00007ffcd9b78da4 [ 274.491602] Modules linked in: cls_bpf sch_ingress iptable_filter ip_tables algif_hash af_alg x86_pkg_temp_thermal fuse [last unloaded: test_bpf] [ 274.504634] CR2: 0000000000000000 [ 274.507976] ---[ end trace 196d18386545eae1 ]--- [ 274.512588] RIP: 0010: (null) [ 274.516334] Code: Bad RIP value. [ 274.519557] RSP: 0018:ffffbc9681f83540 EFLAGS: 00010286 [ 274.524775] RAX: 0000000000000000 RBX: ffffdc967fa80a18 RCX: 0000000000000000 [ 274.531921] RDX: ffff9db2ee08b540 RSI: 000000000000000e RDI: ffffdc967fa809a0 [ 274.539082] RBP: ffffbc9681f83580 R08: ffff9db2c4d62690 R09: 000000000000000c [ 274.546205] R10: 0000000000000000 R11: ffff9db2ee08b540 R12: ffff9db31ce7c000 [ 274.553329] R13: 0000000000000001 R14: 000000000000000c R15: ffff9db3179cf400 [ 274.560456] FS: 00007ff4ae7c5740(0000) GS:ffff9db31fa80000(0000) knlGS:0000000000000000 [ 274.568541] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 274.574277] CR2: ffffffffffffffd6 CR3: 00000004574da004 CR4: 00000000003606e0 [ 274.581403] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 274.588535] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 274.595658] Kernel panic - not syncing: Fatal exception in interrupt [ 274.602046] Kernel Offset: 0x14400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 274.612827] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- [ 274.620387] ------------[ cut here ]------------ I'm also seeing the same failure on x86_64, and it reproduces consistently. >From poking around it looks like the skb's dst entry is being used to calculate the mtu in: mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu; ...but because that dst_entry has an "ops" value set to md_dst_ops, the various ops (including mtu) are not set: crash> struct sk_buff._skb_refdst ffff928f87447700 -x _skb_refdst = 0xffffcd6fbf5ea590 crash> struct dst_entry.ops 0xffffcd6fbf5ea590 ops = 0xffffffffa0193800 crash> struct dst_ops.mtu 0xffffffffa0193800 mtu = 0x0 crash> I confirmed that the dst entry also has dst->input set to dst_md_discard, so it looks like it's an entry that's been initialized via __metadata_dst_init alright. I think the fix here is to use skb_valid_dst(skb) - it checks for DST_METADATA also, and with that fix in place, the problem - which was previously 100% reproducible - disappears. The below patch resolves the panic and all bpf tunnel tests pass without incident. Fixes: c8b34e68 ("ip_tunnel: Add tnl_update_pmtu in ip_md_tunnel_xmit") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
If a non local multicast packet reaches ip_route_input_rcu() while the ingress device IPv4 private data (in_dev) is NULL, we end up doing a NULL pointer dereference in IN_DEV_MFORWARD(). Since the later call to ip_route_input_mc() is going to fail if !in_dev, we can fail early in such scenario and avoid the dangerous code path. v1 -> v2: - clarified the commit message, no code changes Reported-by: Tianhao Zhao <tizhao@redhat.com> Fixes: e58e4159 ("net: Enable support for VRF with ipv4 multicast") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There were a couple logical ORs accidentally mixed in with the bitwise ORs. Fixes: e8149933 ("net: hns3: remove hnae3_get_bit in data path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Mar, 2019 1 commit
-
-
wenxu authored
dst_cache_destroy will be called in dst_release dst_release-->dst_destroy_rcu-->dst_destroy-->metadata_dst_free -->dst_cache_destroy It should not call dst_cache_destroy before dst_release Fixes: 41411e2f ("net/sched: act_tunnel_key: Add dst_cache support") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
-