- 14 Sep, 2004 11 commits
-
-
Nicolas Pitre authored
PXA2xx Patch from Nicolas Pitre Let's make sure OSCR doesn't end up to be restored with a value past OSMR0 otherwise the system timer won't start ticking until OSCR wraps around (aprox 17 min. Also set OSCR _after_ OIER is restored to avoid matching when corresponding match interrupt is masked out. Signed-off-by: Nicolas Pitre
-
Ben Dooks authored
Patch from Ben Dooks Removed resource description left by copying error Thanks to Klaus Fetscher for pointing this out. Signed-off-by: Ben Dooks
-
Ben Dooks authored
Patch from Ben Dooks Fix inverted mask in s3c2410_gpio_setpin() function, add s3c2410_modify_misccr() for shared register, and add s3c2410_gpio_getpin() Signed-off-by: Ben Dooks
-
Ben Dooks authored
Patch from Ben Dooks Fix missed ID change on s3c2410-usb Signed-off-by: Ben DOoks
-
Ben Dooks authored
Patch from Ben Dooks Header file for USB gadget controller (udc) for the Samsung S3C2410 SoC Signed-off-by: Herbert Poetzl Signed-off-by: Ben Dooks
-
Russell King authored
Add kapmd thread to provide a process context to handle "APM" events submitted via apm_queue_event(). Add apm_queue_event(), which can be called from hardware interrupt handlers and the like, typically to fire off a suspend.
-
Russell King authored
Move existing APM state definitions into struct apm_power_info, and add further definitions describing other fields.
-
Russell King authored
Ensure threads waiting for suspend to occur in apm_ioctl are not woken by the pm_suspend thread freezing - they're already frozen.
-
Russell King authored
-
Russell King authored
The original version had issues when two suspend events came in at around the same time, causing APM to get confused: threads became stuck in APM_IOC_SUSPEND and suspends_pending incremented on each apm --suspend call. Now, we only add a suspend event to a users queue and increment suspends_pending if the user isn't already in the middle of handling a suspend event.
-
Russell King authored
-
- 13 Sep, 2004 6 commits
-
-
Russell King authored
-
Russell King authored
Convert user_list_lock spinlock to a read/write semaphore; the spinlock was affording us very little protection.
-
Russell King authored
-
Russell King authored
-
Russell King authored
-
Russell King authored
arch/arm/kernel/apm.c:57:16: warning: dubious one-bit signed bitfield arch/arm/kernel/apm.c:58:17: warning: dubious one-bit signed bitfield arch/arm/kernel/apm.c:59:17: warning: dubious one-bit signed bitfield arch/arm/kernel/apm.c:60:23: warning: dubious one-bit signed bitfield
-
- 12 Sep, 2004 23 commits
-
-
Linus Torvalds authored
-
Benjamin Herrenschmidt authored
This patch kills the bogus radeonfb_read/write routines. In order to do so, it adds a new member to fb_info, along with screen_base, which is screen_size, indicating the mapped area. The default fb_read/write will now use that instead of fix->smem_len if it is non-0, and radeonfb now sets it to the mapped size of the framebuffer. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
This is a resend of a patch sent in July and that got lost somewhat, the "VSCR" register wasn't restored properly from the context on load_up_altivec (typo), please apply the fix: Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/net-2.6
-
David S. Miller authored
into kernel.bkbits.net:/home/davem/sparc-2.6
-
David S. Miller authored
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Only send NETDEV_CHANGEADDR notifies for address and broadcast changes. Notify is also sent out if only one of the 2 changes is successful. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rusty Russell authored
Am travelling, but this passed simple tests here. If this isn't going in, the current seqfile stuff should be ripped out; it's a mess. /proc/net/ip_conntrack was changed over to seq_file. However, seq_file isn't a great fit (a linked list which is changing is not a good candidate for seq file), and the conversion was done badly. 1) Don't do allocation: simply hand the pointer head of the correct chain. 2) Actually output the original tuple. 3) Lock only when actually traversing hash chain. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andi Kleen authored
With improvements by Francois Romieu and David S. Miller. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jamal Hadi Salim authored
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
David S. Miller authored
-
David S. Miller authored
Noticed by Eric Lemoine. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Julian Anastasov authored
Appended is a 2nd version that uses nf_reset_debug. - do not use skb_checksum_help in input path as ipvs can handle incoming CHECKSUM_HW packets - do not use skb_checksum_help in forwarding path - claim that checksum is valid (CHECKSUM_NONE) when entering output path for out->in packets - do not reset/destroy the nfct in IP_VS_XMIT, the intention is to reset the debugging field just to avoid log floods from nf_debug_ip_* functions, it is known that the ipvs packets traverse other hooks, eg. LOCAL_IN->LOCAL_OUT. Use nf_reset_debug instead of nf_reset. Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Old debugging code we no longer need. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Noticed by Herbert Xu. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hideaki Yoshifuji authored
This fixes panic in rt6_device_match(). Well, rt->rt6i_idev is always set if it is dynamically allocated. However, when we hit ip6_null_entry here, its rt6i_idev is NULL. This patch is minimum fix to avoid the oops for now. Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
Bartlomiej Zolnierkiewicz authored
From: Thomas Gleixner <tglx@linutronix.de> 1. If the fake 5513 id bit is not set by the BIOS we must have the 5518 id in the device table. 2. If the register remapping is not set by the BIOS then the enable bit check in ide_pci_setup_ports will fail. It's safe to switch to the remapping mode here. Keeping the not remapped mode would need quite big changes AFAICS. Forward ported to 2.6 by me. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-