- 03 Jun, 2015 20 commits
-
-
Omar Sandoval authored
In preparation for new functionality in mount_subvol(), give it ownership of subvol_name and tidy up the error paths. Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Omar Sandoval <osandov@osandov.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Omar Sandoval authored
Currently, setup_root_args() substitutes 's/subvol=[^,]*/subvolid=0/'. But, this means that if the user passes both a subvol and subvolid for some reason, we won't actually mount the top-level when we recursively mount. For example, consider: mkfs.btrfs -f /dev/sdb mount /dev/sdb /mnt btrfs subvol create /mnt/subvol1 # subvolid=257 btrfs subvol create /mnt/subvol2 # subvolid=258 umount /mnt mount -osubvol=/subvol1,subvolid=258 /dev/sdb /mnt In the final mount, subvol=/subvol1,subvolid=258 becomes subvolid=0,subvolid=258, and the last option takes precedence, so we mount subvol2 and try to look up subvol1 inside of it, which fails. So, instead, do a thorough scan through the argument list and remove any subvol= and subvolid= options, then append subvolid=0 to the end. This implicitly makes subvol= take precedence over subvolid=, but we're about to add a stricter check for that. This also makes setup_root_args() more generic, which we'll need soon. Reviewed-by:
-
Omar Sandoval authored
Since commit 0723a047 ("btrfs: allow mounting btrfs subvolumes with different ro/rw options"), when mounting a subvolume read/write when another subvolume has previously been mounted read-only, we first do a remount. However, this should be done with the superblock locked, as per sync_filesystem(): /* * We need to be protected against the filesystem going from * r/o to r/w or vice versa. */ WARN_ON(!rwsem_is_locked(&sb->s_umount)); This WARN_ON can easily be hit with: mkfs.btrfs -f /dev/vdb mount /dev/vdb /mnt btrfs subvol create /mnt/vol1 btrfs subvol create /mnt/vol2 umount /mnt mount -oro,subvol=/vol1 /dev/vdb /mnt mount -orw,subvol=/vol2 /dev/vdb /mnt2 Fixes: 0723a047 ("btrfs: allow mounting btrfs subvolumes with different ro/rw options") Reviewed-by:
-
Filipe Manana authored
When we clear an extent state's EXTENT_LOCKED bit with clear_extent_bits() through free_io_failure(), we weren't waking up any tasks waiting for the extent's state EXTENT_LOCKED bit, leading to an hang. So make sure clear_extent_bits() ends up waking up any waiters if the bit EXTENT_LOCKED is supplied by its callers. Zygo Blaxell was experiencing such hangs at inode eviction time after file unlinks. Thanks to him for a set of scripts to reproduce the issue. Reported-by:
Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Filipe Manana authored
With commit 1b984508 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole") introduced in the kernel 4.1 merge window, we end up using part of a device hole for which there are already pending chunks or pinned chunks. Before that commit we didn't use the hole and would just move on to the next hole in the device. However when we adjust the start offset for the chunk allocation and we have pinned chunks, we set it blindly to the end offset of the pinned chunk we are currently processing, which is dangerous because we can have a pending chunk that has a start offset that matches the end offset of our pinned chunk - leading us to a case where we end up getting two pending chunks that start at the same physical device offset, which makes us later abort the current transaction with -EEXIST when finishing the chunk allocation at btrfs_create_pending_block_groups(): [194737.659017] ------------[ cut here ]------------ [194737.660192] WARNING: CPU: 15 PID: 31111 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x106 [btrfs]() [194737.662209] BTRFS: Transaction aborted (error -17) [194737.663175] Modules linked in: btrfs dm_snapshot dm_bufio dm_flakey dm_mod crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse [194737.674015] CPU: 15 PID: 31111 Comm: xfs_io Tainted: G W 4.0.0-rc5-btrfs-next-9+ #2 [194737.675986] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [194737.682999] 0000000000000009 ffff8800564c7a98 ffffffff8142fa46 ffffffff8108b6a2 [194737.684540] ffff8800564c7ae8 ffff8800564c7ad8 ffffffff81045ea5 ffff8800564c7b78 [194737.686017] ffffffffa0383aa7 00000000ffffffef ffff88000c7ba000 ffff8801a1f66f40 [194737.687509] Call Trace: [194737.688068] [<ffffffff8142fa46>] dump_stack+0x4f/0x7b [194737.689027] [<ffffffff8108b6a2>] ? console_unlock+0x361/0x3ad [194737.690095] [<ffffffff81045ea5>] warn_slowpath_common+0xa1/0xbb [194737.691198] [<ffffffffa0383aa7>] ? __btrfs_abort_transaction+0x52/0x106 [btrfs] [194737.693789] [<ffffffff81045f05>] warn_slowpath_fmt+0x46/0x48 [194737.695065] [<ffffffffa0383aa7>] __btrfs_abort_transaction+0x52/0x106 [btrfs] [194737.696806] [<ffffffffa039a3bd>] btrfs_create_pending_block_groups+0x101/0x130 [btrfs] [194737.698683] [<ffffffffa03aa433>] __btrfs_end_transaction+0x84/0x366 [btrfs] [194737.700329] [<ffffffffa03aa725>] btrfs_end_transaction+0x10/0x12 [btrfs] [194737.701924] [<ffffffffa0394b51>] btrfs_check_data_free_space+0x11f/0x27c [btrfs] [194737.703675] [<ffffffffa03b8ba4>] __btrfs_buffered_write+0x16a/0x4c8 [btrfs] [194737.705417] [<ffffffffa03bb502>] ? btrfs_file_write_iter+0x19a/0x431 [btrfs] [194737.707058] [<ffffffffa03bb511>] ? btrfs_file_write_iter+0x1a9/0x431 [btrfs] [194737.708560] [<ffffffffa03bb68d>] btrfs_file_write_iter+0x325/0x431 [btrfs] [194737.710673] [<ffffffff81067d85>] ? get_parent_ip+0xe/0x3e [194737.712076] [<ffffffff811534c3>] new_sync_write+0x7c/0xa0 [194737.713293] [<ffffffff81153b58>] vfs_write+0xb2/0x117 [194737.714443] [<ffffffff81154424>] SyS_pwrite64+0x64/0x82 [194737.715646] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [194737.717175] ---[ end trace f2d5dc04e56d7e48 ]--- [194737.718170] BTRFS: error (device sdc) in btrfs_create_pending_block_groups:9524: errno=-17 Object already exists The -EEXIST failure comes from btrfs_finish_chunk_alloc(), called by btrfs_create_pending_block_groups(), when it attempts to insert a duplicated device extent item via btrfs_alloc_dev_extent(). This issue was reproducible with fstests generic/038 running in a loop for several hours (it's very hard to hit) and using MOUNT_OPTIONS="-o discard". Applying Jeff's recent patch titled "btrfs: add missing discards when unpinning extents with -o discard" makes the issue much easier to reproduce (usually within 4 to 5 hours), since it pins chunks for longer periods of time when an unused block group is deleted by the cleaner kthread. Fix this by making sure that we never adjust the start offset to a lower value than it currently has. Fixes: 1b984508 ("Btrfs: fix find_free_dev_extent() malfunction in case device tree has hole" Signed-off-by:
-
Sasha Levin authored
__btrfs_close_devices() would call_rcu to free the device, which is racy with list_for_each_entry() accessing the memory to retrieve the next device on the list. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Reviewed-by:
-
David Sterba authored
The INO_LOOKUP ioctl can lookup path for a given inode number and is thus restricted. As a sideefect it can find the root id of the containing subvolume and we're using this int the 'btrfs inspect rootid' command. The restriction is unnecessary in case we set the ioctl args args::treeid = 0 args::objectid = 256 (BTRFS_FIRST_FREE_OBJECTID) Then the path will be empty and the treeid is filled with the root id of the inode on which the ioctl is called. This behaviour is unchanged, after the root restriction is removed. Signed-off-by:
-
Filipe Manana authored
When we create a block group we add it to the rbtree of block groups before setting its ->space_info field (while it's NULL). This is problematic since other tasks can access the block group from the rbtree and attempt to use its ->space_info before it is set by btrfs_make_block_group(). This can happen for example when a concurrent fitrim ioctl operation is ongoing, which produces a trace like the following when CONFIG_DEBUG_PAGEALLOC is set. [11509.604369] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [11509.606373] IP: [<ffffffff8107d675>] __lock_acquire+0xb4/0xf02 [11509.608179] PGD 2296a8067 PUD 22f4a2067 PMD 0 [11509.608179] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [11509.608179] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop fuse acpi_cpufreq processor i2c_piix4 psmou [11509.608179] CPU: 10 PID: 8538 Comm: fstrim Tainted: G W 4.0.0-rc5-btrfs-next-9+ #2 [11509.608179] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [11509.608179] task: ffff88009f5c46d0 ti: ffff8801b3edc000 task.ti: ffff8801b3edc000 [11509.608179] RIP: 0010:[<ffffffff8107d675>] [<ffffffff8107d675>] __lock_acquire+0xb4/0xf02 [11509.608179] RSP: 0018:ffff8801b3edf9e8 EFLAGS: 00010002 [11509.608179] RAX: 0000000000000046 RBX: 0000000000000000 RCX: 0000000000000000 [11509.608179] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000018 [11509.608179] RBP: ffff8801b3edfaa8 R08: 0000000000000001 R09: 0000000000000000 [11509.608179] R10: 0000000000000000 R11: ffff88009f5c4f98 R12: 0000000000000000 [11509.608179] R13: 0000000000000000 R14: 0000000000000018 R15: ffff88009f5c46d0 [11509.608179] FS: 00007f280a10e840(0000) GS:ffff88023ed40000(0000) knlGS:0000000000000000 [11509.608179] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [11509.608179] CR2: 0000000000000018 CR3: 00000002119bc000 CR4: 00000000000006e0 [11509.608179] Stack: [11509.608179] 0000000000000000 0000000000000000 0000000000000004 0000000000000000 [11509.608179] ffff880100000000 ffffffff00000000 0000000000000001 ffffffff00000000 [11509.608179] 0000000000000001 0000000000000000 ffff880100000000 00000000000006c4 [11509.608179] Call Trace: [11509.608179] [<ffffffff8107dc57>] ? __lock_acquire+0x696/0xf02 [11509.608179] [<ffffffff8107e806>] lock_acquire+0xa5/0x116 [11509.608179] [<ffffffffa04cc876>] ? do_trimming+0x51/0x145 [btrfs] [11509.608179] [<ffffffff81434f37>] _raw_spin_lock+0x34/0x44 [11509.608179] [<ffffffffa04cc876>] ? do_trimming+0x51/0x145 [btrfs] [11509.608179] [<ffffffffa04cc876>] do_trimming+0x51/0x145 [btrfs] [11509.608179] [<ffffffffa04cde7d>] btrfs_trim_block_group+0x201/0x491 [btrfs] [11509.608179] [<ffffffffa04849e2>] btrfs_trim_fs+0xe0/0x129 [btrfs] [11509.608179] [<ffffffffa04bb80a>] btrfs_ioctl_fitrim+0x138/0x167 [btrfs] [11509.608179] [<ffffffffa04c002f>] btrfs_ioctl+0x50d/0x21e8 [btrfs] [11509.608179] [<ffffffff81123bda>] ? might_fault+0x58/0xb5 [11509.608179] [<ffffffff81123bda>] ? might_fault+0x58/0xb5 [11509.608179] [<ffffffff81123bda>] ? might_fault+0x58/0xb5 [11509.608179] [<ffffffff81158050>] ? cp_new_stat+0x147/0x15e [11509.608179] [<ffffffff81163041>] do_vfs_ioctl+0x3c6/0x479 [11509.608179] [<ffffffff81158116>] ? SYSC_newfstat+0x25/0x2e [11509.608179] [<ffffffff81435b54>] ? ret_from_sys_call+0x1d/0x58 [11509.608179] [<ffffffff8116b915>] ? __fget_light+0x2d/0x4f [11509.608179] [<ffffffff8116314e>] SyS_ioctl+0x5a/0x7f [11509.608179] [<ffffffff81435b32>] system_call_fastpath+0x12/0x17 [11509.608179] Code: f4 01 00 0f 85 c0 00 00 00 48 c7 c1 f3 1f 7d 81 48 c7 c2 aa cb 7c 81 be fc 0b 00 00 eb 70 83 3d 61 eb 9c 00 00 0f 84 a5 00 00 00 <49> 81 3e 40 a3 2b 82 b8 00 00 00 [11509.608179] RIP [<ffffffff8107d675>] __lock_acquire+0xb4/0xf02 [11509.608179] RSP <ffff8801b3edf9e8> [11509.608179] CR2: 0000000000000018 [11509.608179] ---[ end trace 570a5c6769f0e49a ]--- Which corresponds to the following access in fs/btrfs/free-space-cache.c: static int do_trimming(struct btrfs_block_group_cache *block_group, u64 *total_trimmed, u64 start, u64 bytes, u64 reserved_start, u64 reserved_bytes, struct btrfs_trim_range *trim_entry) { struct btrfs_space_info *space_info = block_group->space_info; (...) spin_lock(&space_info->lock); ^^^^^ - block_group->space_info is NULL... Fix this by ensuring the block group's ->space_info is set before adding the block group to the rbtree. Signed-off-by: -
Anand Jain authored
Report missing device when add is successful, otherwise it would exit as ENOMEM. And add uuid to the report. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Qu Wenruo authored
Old csum type check is wrong and can't catch csum_type 1(not supported). Fix it to avoid hostile 0 division. Reported-by:
Lukas Lueg <lukas.lueg@gmail.com> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Reviewed-by:
-
Filipe Manana authored
Marc reported a problem where the receiving end of an incremental send was performing clone operations that failed with -EINVAL. This happened because, unlike for uncompressed extents, we were not checking if the source clone offset and length, after summing the data offset, falls within the source file's boundaries. So make sure we do such checks when attempting to issue clone operations for compressed extents. Problem reproducible with the following steps: $ mkfs.btrfs -f /dev/sdb $ mount -o compress /dev/sdb /mnt $ mkfs.btrfs -f /dev/sdc $ mount -o compress /dev/sdc /mnt2 # Create the file with a single extent of 128K. This creates a metadata file # extent item with a data start offset of 0 and a logical length of 128K. $ xfs_io -f -c "pwrite -S 0xaa 64K 128K" -c "fsync" /mnt/foo # Now rewrite the range 64K to 112K of our file. This will make the inode's # metadata continue to point to the 128K extent we created before, but now # with an extent item that points to the extent with a data start offset of # 112K and a logical length of 16K. # That metadata file extent item is associated with the logical file offset # at 176K and covers the logical file range 176K to 192K. $ xfs_io -c "pwrite -S 0xbb 64K 112K" -c "fsync" /mnt/foo # Now rewrite the range 180K to 12K. This will make the inode's metadata # continue to point the the 128K extent we created earlier, with a single # extent item that points to it with a start offset of 112K and a logical # length of 4K. # That metadata file extent item is associated with the logical file offset # at 176K and covers the logical file range 176K to 180K. $ xfs_io -c "pwrite -S 0xcc 180K 12K" -c "fsync" /mnt/foo $ btrfs subvolume snapshot -r /mnt /mnt/snap1 $ touch /mnt/bar # Calls the btrfs clone ioctl. $ ~/xfstests/src/cloner -s $((176 * 1024)) -d $((176 * 1024)) \ -l $((4 * 1024)) /mnt/foo /mnt/bar $ btrfs subvolume snapshot -r /mnt /mnt/snap2 $ btrfs send /mnt/snap1 | btrfs receive /mnt2 At subvol /mnt/snap1 At subvol snap1 $ btrfs send -p /mnt/snap1 /mnt/snap2 | btrfs receive /mnt2 At subvol /mnt/snap2 At snapshot snap2 ERROR: failed to clone extents to bar Invalid argument A test case for fstests follows soon. Reported-by:Marc MERLIN <marc@merlins.org> Tested-by:
Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by:
-
Christian Engelmayer authored
Commit 9c8b35b1 ("btrfs: quota: Automatically update related qgroups or mark INCONSISTENT flags when assigning/deleting a qgroup relations.") introduced the allocation of a temporary ulist in function btrfs_add_qgroup_relation() and added the corresponding cleanup to the out path. However, the allocation was introduced before the src/dst level check that directly returns. Fix the possible leakage of the ulist by moving the allocation after the input validation. Detected by Coverity CID 1295988. Signed-off-by:
Christian Engelmayer <cengelma@gmx.at> Reviewed-by:
-
Filipe Manana authored
If the call to btrfs_truncate_inode_items() failed and we don't have a block group, we were unlocking the cache_write_mutex without having locked it (we do it only if we have a block group). Fixes: 1bbc621e ("Btrfs: allow block group cache writeout outside critical section in commit") Signed-off-by:
-
Anand Jain authored
Signed-off-by:
-
David Sterba authored
fs/btrfs/volumes.c: In function ‘btrfs_create_uuid_tree’: fs/btrfs/volumes.c:3909:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=] btrfs_abort_transaction(trans, tree_root, ^ CC [M] fs/btrfs/ioctl.o fs/btrfs/ioctl.c: In function ‘create_subvol’: fs/btrfs/ioctl.c:549:3: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘long int’ [-Wformat=] btrfs_abort_transaction(trans, root, PTR_ERR(new_root)); PTR_ERR returns long, but we're really using 'int' for the error codes everywhere so just set and use the local variable. Signed-off-by:
-
David Sterba authored
The annotated functios will be placed into .text.unlikely section. The annotation also hints compiler to move the code out of the hot paths, and may implicitly mark if-statement leading to that block as unlikely. This is a heuristic, the impact on the generated code is not significant. Signed-off-by:
-
David Sterba authored
WARN is called from a single location and all bugreports say that's in super.c __btrfs_abort_transaction. This is slightly confusing as we'd rather want to know the exact callsite. Whereas this information is printed in the syslog below the stacktrace, this requires further look and we usually see only the headline from WARNING. Moving the WARN into the macro has to inline some code and increases code by a few kilobytes: text data bss dec hex filename 835481 20305 14120 869906 d4612 btrfs.ko.before 842883 20305 14120 877308 d62fc btrfs.ko.after The delta is +7k (130+ calls), measured on 3.19 x86_64, distro config. The increase is not small and could lead to worse icache use. The code is on error/exit paths that can be recognized by compiler as cold and moved out of the way so the impact is speculated to be low, if measurable at all. Signed-off-by:
-
David Sterba authored
Long time ago (2008) the defrag was automatic for new b-tree writes but has been disabled after performance problems. There was a leftover in tree-defrag.c that effectively stops any defragmentation on b-trees. This is a bit unexpected and IMHO undesired. The SSD mode is an optimization and defrag is supposed to work if the users asks for it. Related commits: 6702ed49 Btrfs: Add run time btree defrag, and an ioctl to force btree defrag e18e4809 Btrfs: Add mount -o ssd, which includes optimizations for seek free storage b3236e68 Btrfs: Leave on the tree defragger in mount -o ssd, it still helps there 9afbb0b7 Btrfs: Disable tree defrag in SSD mode The last three commits switch the defrag+ssd off/on/off and the last one 3f157a2f Btrfs: Online btree defragmentation fixes misses the bits from tree-defrag.c to revert to the behaviour introduced in e18e4809. Signed-off-by:
-
Filipe Manana authored
When we shrink the usable size of a device (its total_bytes), we go over all the device extent items in the device tree and attempt to relocate the chunk of any device extent that goes beyond the new usable size for the device. We do that after setting the new usable size (total_bytes) in the device object, so that all new allocations (and reallocations) don't use areas of the device that go beyond the new (shorter) size. However we were not considering that before setting the new size in the device, pending chunks might have been created that use device extents that go beyond the new size, and those device extents are not yet in the device tree after we search the device tree - they are still attached to the list of new block group for some ongoing transaction handle, and they are only added to the device tree when the transaction handle is ended (via btrfs_create_pending_block_groups()). So check for pending chunks with device extents that go beyond the new size and if any exists, commit the current transaction and repeat the search in the device tree. Not doing this it would mean we would return success to user space while still having extents that go beyond the new size, and later user space could override those locations on the device while the fs still references them, causing all sorts of corruption and unexpected events. Signed-off-by:
-
Omar Sandoval authored
Since commit bafc9b75 ("vfs: More precise tests in d_invalidate"), mounted subvolumes can be deleted because d_invalidate() won't fail. However, we run into problems when we attempt to delete the default subvolume while it is mounted as the root filesystem: # btrfs subvol list / ID 257 gen 306 top level 5 path rootvol ID 267 gen 334 top level 5 path snap1 # btrfs subvol get-default / ID 267 gen 334 top level 5 path snap1 # btrfs inspect-internal rootid / 267 # mount -o subvol=/ /dev/vda1 /mnt # btrfs subvol del /mnt/snap1 Delete subvolume (no-commit): '/mnt/snap1' ERROR: cannot delete '/mnt/snap1' - Operation not permitted # findmnt / findmnt: can't read /proc/mounts: No such file or directory # ls /proc # Markus reported that this same scenario simply led to a kernel oops. This happens because in btrfs_ioctl_snap_destroy(), we call d_invalidate() before we check may_destroy_subvol(), which means that we detach the submounts and drop the dentry before erroring out. Instead, we should only invalidate the dentry once the deletion has succeeded. Additionally, the shrink_dcache_sb() isn't necessary; d_invalidate() will prune the dcache for the deleted subvolume. Cc: <stable@vger.kernel.org> Fixes: bafc9b75 ("vfs: More precise tests in d_invalidate") Reported-by:
Markus Schauler <mschauler@gmail.com> Signed-off-by:
-
- 01 Jun, 2015 1 commit
-
-
Linus Torvalds authored
-
- 31 May, 2015 13 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fix from Al Viro: "Off-by-one in d_walk()/__dentry_kill() race fix. It's very hard to hit; possible in the same conditions as the original bug, except that you need the skipped branch to contain all the remaining evictables, so that the d_walk()-calling loop in d_invalidate() decides there's nothing more to do and doesn't go for another pass - otherwise that next pass will sweep the sucker. So it's not too urgent, but seeing that the fix is obvious and the original commit has spread into all -stable branches..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: d_walk() might skip too much
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Three fixes this time around: - fix a memory leak which occurs when probing performance monitoring unit interrupts - fix handling of non-PMD aligned end of RAM causing boot failures - fix missing syscall trace exit path with syscall tracing enabled causing a kernel oops in the audit code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8357/1: perf: fix memory leak when probing PMU PPIs ARM: fix missing syscall trace exit ARM: 8356/1: mm: handle non-pmd-aligned end of RAM -
git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linuxLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 4.1 all across the tree" * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux: MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression MIPS: BMIPS: Fix bmips_wr_vec() MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 MIPS: irq: Use DECLARE_BITMAP ttyFDC: Fix to use native endian MMIO reads MIPS: Fix CDMM to use native endian MMIO reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull turbostat tool fixes from Len Brown: "Just one minor kernel dependency in this batch -- added a #define to msr-index.h" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number to 4.7 tools/power turbostat: allow running without cpu0 tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS tools/power turbostat: enable turbostat to support Knights Landing (KNL) tools/power turbostat: correctly display more than 2 threads/core
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes, with the exception of the following that address fall-out from recent v4.1-rc1 changes: - regression fix related to the big fabric API registration changes and configfs_depend_item() usage, that required cherry-picking one of HCH's patches from for-next to address the issue for v4.1 code. - remaining TCM-USER -v2 related changes to enforce full CDB passthrough from Andy + Ilias. Also included is a target_core_pscsi driver fix from Andy that addresses a long standing issue with a Scsi_Host reference being leaked on PSCSI device shutdown" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix error path in isert_create_pi_ctx() target: Use a PASSTHROUGH flag instead of transport_types target: Move passthrough CDB parsing into a common function target/user: Only support full command pass-through target/user: Update example code for new ABI requirements target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem target: Drop signal_pending checks after interruptible lock acquire target: Add missing parentheses target: Fix bidi command handling target/user: Disallow full passthrough (pass_level=0) ISCSI: fix minor memory leak -
Linus Torvalds authored
Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Some late hwmon patches, all headed for -stable - fix sysfs attribute initialization in nct6775 and nct6683 drivers - do not attempt to auto-detect tmp435 on I2C address 0x37 - ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver" * tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6683) Add missing sysfs attribute initialization hwmon: (nct6775) Add missing sysfs attribute initialization hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37 hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
-
Roland Dreier authored
We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed in the function. That means the cleanup path should use the local pi_ctx variable, not desc->pi_ctx. This was detected by Coverity (CID 1260062). Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org>
-
Andy Grover authored
It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by:
Andy Grover <agrover@redhat.com> Reviewed-by:
Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by:
-
Andy Grover authored
Aside from whether they handle BIDI ops or not, parsing of the CDB by kernel and user SCSI passthrough modules should be identical. Move this into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user. Reported-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Andy Grover authored
After much discussion, give up on only passing a subset of SCSI commands to userspace and pass them all. Based on what pscsi is doing, make sure to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to pscsi. Make hw_block_size configurable via dev param. Remove mention of command filtering from tcmu-design.txt. Signed-off-by:
-
Andy Grover authored
We now require that the userspace handler set a bit if the command is not handled. Update calls to tcmu_hdr_get_op for v2. Signed-off-by:
-
Andy Grover authored
See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by:
-
Christoph Hellwig authored
There is just one configfs subsystem in the target code, so we might as well add two helpers to reference / unreference it from the core code instead of passing pointers to it around. This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e, where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would fail, because the assignment from the original target_core_subsystem[] is no longer happening at target_register_template() time. (Fix target_core_exit_configfs pointer dereference - Sagi) Signed-off-by:
Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by:
-
- 30 May, 2015 3 commits
-
-
Guenter Roeck authored
The following error message is seen when loading the nct6683 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by:
Alexey Orishko <alexey.orishko@gmail.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Guenter Roeck <linux@roeck-us.net>
-
Guenter Roeck authored
The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull PCI / ACPI fix from Rafael Wysocki: "This fixes a bug uncovered by a recent driver core change that modified the implementation of the ACPI_COMPANION_SET() macro to strictly rely on its second argument to be either NULL or a valid pointer to struct acpi_device. As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works with the assumption that the only code path calling pci_create_root_bus() is pci_acpi_scan_root() and therefore the sysdata argument passed to it will always match the expectations of pcibios_root_bridge_prepare(). That need not be the case, however, and in particular it is not the case for the Xen pcifront driver that passes a pointer to its own private data strcture as sysdata to pci_scan_bus_parented() which then passes it to pci_create_root_bus() and it ends up being used incorrectly by pcibios_root_bridge_prepare()" * tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / ACPI: Do not set ACPI companions for host bridges with parents
-
- 29 May, 2015 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "This is a little larger than I'd like late in the release cycle, but all the fixes are for regressions introduced in the 4.1-rc1 merge, or are needed back in -stable kernels fairly quickly as they are filesystem corruption or userspace visible correctness issues. Changes in this update: - regression fix for new rename whiteout code - regression fixes for new superblock generic per-cpu counter code - fix for incorrect error return sign introduced in 3.17 - metadata corruption fixes that need to go back to -stable kernels" * tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: fix broken i_nlink accounting for whiteout tmpfile inode xfs: xfs_iozero can return positive errno xfs: xfs_attr_inactive leaves inconsistent attr fork state behind xfs: extent size hints can round up extents past MAXEXTLEN xfs: inode and free block counters need to use __percpu_counter_compare percpu_counter: batch size aware __percpu_counter_compare() xfs: use percpu_counter_read_positive for mp->m_icount
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Two weeks worth of small bug fixes this time, nothing sticking out this time: - one defconfig change to adapt to a modified Kconfig symbol - two fixes for i.MX for backwards compatibility with older DT files that was accidentally broken - one regression fix for irq handling on pxa - three small dt files on omap, and one each for imx and exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 ARM: imx6: gpc: don't register power domain if DT data is missing ARM: imx6: allow booting with old DT ARM: dts: set display clock correctly for exynos4412-trats2 ARM: pxa: pxa_cplds: signedness bug in probe ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK ARM: dts: omap3-devkit8000: Fix NAND DT node ARM: dts: am335x-boneblack: disable RTC-only sleep ARM: dts: fix imx27 dtb build rule ARM: dts: imx27: only map 4 Kbyte for fec registers -
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dmLinus Torvalds authored
Pull device-mapper fixes from Mike Snitzer: "Quite a few fixes for DM's blk-mq support thanks to extra DM multipath testing from Junichi Nomura and Bart Van Assche. Also fix a casting bug in dm_merge_bvec() that could cause only a single page to be added to a bio (Joe identified this while testing dm-cache writeback)" * tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix casting bug in dm_merge_bvec() dm: fix reload failure of 0 path multipath mapping on blk-mq devices dm: fix false warning in free_rq_clone() for unmapped requests dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED dm: run queue on re-queue
-
