- 24 Jul, 2023 1 commit
-
-
Stefan Binding authored
To enable the speaker output in external boost mode, 2 registers must be set, one after another. The longer the time between the writes of the two registers, the more likely, and more loudly a pop may occur. To minimize this, an mbox command can be used to allow the firmware to perform this action, minimizing any delay between write, thus minimizing any pop or click as a result. The old method will remain when running without firmware. Acked-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230721151816.2080453-2-sbinding@opensource.cirrus.comSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 21 Jul, 2023 17 commits
-
-
Kai Vehmanen authored
Add HDMI codec ID for Intel Lunar Lake platform. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20230721135722.31288-3-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Kai Vehmanen authored
Switch order of Intel MTL and RPL codec entries to keep the codec device id list nicely ordered. Also use the opportunity to fix the naming to the convention used elsewhere in the drivers. Signed-off-by:
-
Takashi Iwai authored
Instead of open-code, use the new standard helper to manage vmaster stuff for code simplification. Also, handle the errors from the helper more properly instead of silently ignoring. The code changes the call order of snd_ctl_add() of the vmaster object and its followers for avoiding the possible memory leaks at error path. But there should be no difference in the functionality. Link: https://lore.kernel.org/r/20230721071643.3631-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Instead of open-code, use the new standard helper to manage vmaster stuff for code simplification. Also, handle the errors from the helper more properly instead of silently ignoring. Link: https://lore.kernel.org/r/20230721071643.3631-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Instead of open-code, use the new standard helper to manage vmaster stuff for code simplification. Except for a debug print, there should be no functional change. Link: https://lore.kernel.org/r/20230721071643.3631-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Add a new helper to add multiple vmaster followers in a shot. The same function was open-coded in various places, and this helper replaces them. Link: https://lore.kernel.org/r/20230721071643.3631-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-12-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Acked-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Also, add the missing NULL checks in psc724_set_jack_state() to deal with error cases. Link: https://lore.kernel.org/r/20230720082108.31346-7-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-4-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Replace an open code with the new snd_ctl_find_id_mixer(). There is no functional change. Link: https://lore.kernel.org/r/20230720082108.31346-3-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
A commonly seen pattern is to run snd_ctl_find_id() for a mixer control element with a given string. Let's provide a standard helper for achieving that for simplifying the code. Link: https://lore.kernel.org/r/20230720082108.31346-2-tiwai@suse.deSigned-off-by:
-
- 20 Jul, 2023 12 commits
-
-
Takashi Iwai authored
ALSA: Make control API taking controls_rwsem consistently A few ALSA control API helpers like snd_ctl_rename(), snd_ctl_remove() and snd_ctl_find_*() suppose the callers taking card->controls_rwsem. But it's error-prone and fragile. This patch set tries to change those API functions to take the card->controls>rwsem internally by themselves, so that the drivers don't need to take care of lockings. After applying this patch set, only a couple of places still touch card->controls_rwsem (which are OK-ish as they need for traversing the control linked list). Link: https://lore.kernel.org/r/20230718141304.1032-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Now that snd_ctl_find_id() takes the locking itself, we can get rid of the messy locking in the caller side in snd_emu10k1_verify_controls(). Link: https://lore.kernel.org/r/20230718141304.1032-12-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Now all needed callers have been replaced with *_locked() versions, let's turn on the locking in snd_ctl_find_id() and snd_ctl_find_numid(). This patch also adds the lockdep assertions for debugging, too. Link: https://lore.kernel.org/r/20230718141304.1032-11-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
For reducing the unnecessary use of controls_rwsem in the drivers, this patch adds a new variant for snd_ctl_find_*() helpers: snd_ctl_find_id_locked() and snd_ctl_find_numid_locked() look for a kctl element inside the card->controls_rwsem -- that is, doing the very same as what snd_ctl_find_id() and snd_ctl_find_numid() did until now. snd_ctl_find_id() and snd_ctl_find_numid() remain same, i.e. still unlocked version, but they will be switched to locked version once after all callers are replaced. The patch also replaces the calls of snd_ctl_find_id() and snd_ctl_find_numid() in a few places; all of those are places where we know that the functions are called properly with controls_rwsem held. All others are without rwsem (although they should have been). After this patch, we'll turn on the locking in snd_ctl_find_id() and snd_ctl_find_numid() to be more race-free. Link: https://lore.kernel.org/r/20230718141304.1032-10-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The id object passed to snd_ctl_find_id() is only read, and we can mark it with const gracefully. Link: https://lore.kernel.org/r/20230718141304.1032-9-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
The controls_rwsem of snd_card object is rather an internal lock, and not really meant to be used by others for its data protection. This patch addresses it by replacing the controls_rwsem usages with the own (new) mutex. Note that the up_write() and down_write() calls around gbaudio_remove_component_controls() are simply dropped without replacement. These temporary up/down were a workaround since gbaudio_remove_component_controls() itself took the rwsem. Now it was also gone, we can clean up the workaround, too. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Vaibhav Agarwal <vaibhav.sr@gmail.com> Cc: Mark Greer <mgreer@animalcreek.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: greybus-dev@lists.linaro.org Link: https://lore.kernel.org/r/20230718141304.1032-8-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Use the standard snd_ctl_activate_id() helper instead of an open code for code simplification. Acked-by:
-
Takashi Iwai authored
To assure the proper locking, add the lockdep check to __snd_ctl_remove(), __snd_ctl_add_replace() and other internal functions to handle user controls. Link: https://lore.kernel.org/r/20230718141304.1032-6-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
So far, snd_ctl_remove() requires its caller to take card->controls_rwsem manually before the call for avoiding possible races. However, many callers don't care and miss the locking. Basically it's cumbersome and error-prone to enforce it to each caller. Moreover, card->controls_rwsem is a field that should be used only by internal or proper helpers, and it's not to be touched at random external places. This patch is an attempt to make those calls more consistent: now snd_ctl_remove() takes the card->controls_rwsem internally, just like other API functions for kctls. Since a few callers already take the controls_rwsem locks, the patch removes those locks at the same time, too. Link: https://lore.kernel.org/r/20230718141304.1032-5-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
Use the standard snd_ctl_remove_id() helper instead of open code for removing a kctl. This helps for avoiding possible races. Reviewed-by:
Claudiu Beznea <claudiu.beznea@tuxon.dev> Acked-by:
-
Takashi Iwai authored
Use the standard snd_ctl_remove_id() helper function instead of open code. This allows us to reduce the manual card->rwsem lock in the caller side. Acked-by:
-
Takashi Iwai authored
snd_ctl_rename() expects that card->controls_rwsem is held in the caller side for avoiding possible races, but actually no one really did that. It's likely because this operation is done usually only at the device initialization where no race can happen. But, it's still safer to take a lock, so we just take the lock inside snd_ctl_rename() like most of other API functions do. Link: https://lore.kernel.org/r/20230718141304.1032-2-tiwai@suse.deSigned-off-by:
-
- 18 Jul, 2023 10 commits
-
-
Takashi Iwai authored
Pull cleanup of HD-audio PCI IDs. Signed-off-by: -
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header. BSW replaces CHV, as 0x22a8 was added in PCI header as BSW ID for consistency, as they are same (similar) platforms. The ACPI IDs are used only internally and lower 16 bits uniquely define the device as vendor ID for Intel is 8086 for all of them. Use PCI_DEVICE_DATA() to match PCI device to be consistent with other Intel audio drivers. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20230717114511.484999-16-amadeuszx.slawinski@linux.intel.comSigned-off-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header and while at it change to using PCI_DEVICE_DATA() macro, to simplify declarations. Acked-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header and while at it change to using PCI_DEVICE_DATA() macro, to simplify declarations. As Apollolake is Broxton-P successor that made it to the market, be precise and use APL shortcut. Acked-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header. Adjust AVS_MACH_ENTRY() macro, so device ID can be provided in short form. Acked-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header and while at it change to using PCI_DEVICE_DATA() macro, to simplify declarations. Acked-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header and while at it to simplify declarations change to using PCI_DEVICE_DATA() macro for Intel IDs and PCI_VDEVICE() for all other that have defined vendor. Acked-by:
-
Amadeusz Sławiński authored
Use PCI device IDs from pci_ids.h header. Also simplify comments for Alder Lake and Raptor Lake platforms, as new IDs make it clear what revision is in use. Acked-by:
-
Amadeusz Sławiński authored
Instead of using local macro to match PCI device, use global one. As Apollolake is Broxton-P successor that made it to the market, be precise and use APL shortcut. IS_CFL() macro is dropped as it is unused. Acked-by:
-
Amadeusz Sławiński authored
Instead of using local macro to match PCI device, use global one. Reviewed-by:
-
