- 27 Jun, 2013 2 commits
-
-
Alex Shi authored
The following 2 variables are only used under CONFIG_SMP, so its better to move their definiation into CONFIG_SMP too. atomic64_t load_avg; atomic_t runnable_avg; Signed-off-by:Alex Shi <alex.shi@intel.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1371694737-29336-3-git-send-email-alex.shi@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Alex Shi authored
Remove CONFIG_FAIR_GROUP_SCHED that covers the runnable info, then we can use runnable load variables. Also remove 2 CONFIG_FAIR_GROUP_SCHED setting which is not in reverted patch(introduced in 9ee474f5), but also need to revert. Signed-off-by:
-
- 19 Jun, 2013 16 commits
-
-
Joe Perches authored
Just use struct ctl_table. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Viresh Kumar authored
sd can't be NULL in init_sched_groups_power() and so checking it for NULL isn't useful. In case it is required, then also we need to rearrange the code a bit as we already accessed invalid pointer sd to get sg: sg = sd->groups. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Viresh Kumar authored
In build_sched_groups() we don't need to call get_group() for cpus which are already covered in previous iterations. Calling get_group() would mark the group used and eventually leak it since we wouldn't connect it and not find it again to free it. This will happen only in cases where sg->cpumask contained more than one cpu (For any topology level). This patch would free sg's memory for all cpus leaving the group leader as the group isn't marked used now. Signed-off-by:
-
Viresh Kumar authored
In the beginning of build_sched_groups() we called sched_domain_span() and cached its return value in span. Few statements later we are calling it again to get the same pointer. Lets use the cached value instead as it hasn't changed in between. Signed-off-by:
-
Viresh Kumar authored
For loop for traversing sched_domain_topology was used at multiple placed in core.c. This patch removes code redundancy by creating for_each_sd_topology(). Signed-off-by:
-
Viresh Kumar authored
Memory for sd is allocated with kzalloc_node() which will initialize its fields with zero. In build_sched_domain() we are setting sd->child to child even if child is NULL, which isn't required. Lets do it only if child isn't NULL. Signed-off-by:
-
Viresh Kumar authored
alloc_state will be overwritten by __visit_domain_allocation_hell() and so we don't actually need to initialize alloc_state. Signed-off-by:
-
Viresh Kumar authored
We are saving first scheduling domain for a cpu in build_sched_domains() by iterating over the nested sd->child list. We don't actually need to do it this way. tl will be equal to sched_domain_topology for the first iteration and so we can set *per_cpu_ptr(d.sd, i) based on that. So, save pointer to first SD while running the iteration loop over tl's. Signed-off-by:
-
Viresh Kumar authored
build_sched_domain() never uses parameter struct s_data *d and so passing it is useless. Remove it. Signed-off-by:
-
Viresh Kumar authored
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time back and the comments/Documentation never got updated. I figured it out when I was going through sched-domains.txt and so thought of fixing it globally. I haven't crossed check if the stuff that is referenced in sched/core.c by all these files is still present and hasn't changed as that wasn't the motive behind this patch. Signed-off-by:
-
Michael Wang authored
default_cfs_period(), do_sched_cfs_period_timer(), do_sched_cfs_slack_timer() already defined previously, no need to declare again. Signed-off-by:
Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by:
-
Michael Wang authored
Directly use rq to save some code. Signed-off-by:
-
Kirill Tkhai authored
[ Peter, this is based off of some of my work, I ran it though a few tests and it passed. I also reviewed it, and added my SOB as I am somewhat a co-author to it. ] Based on the patch by Steven Rostedt from previous year: https://lkml.org/lkml/2012/4/18/517 1)Simplify pull_rt_task() logic: search in pushable tasks of dest runqueue. The only pullable tasks are the tasks which are pushable in their local rq, and no others. 2)Remove .leaf_rt_rq_list member of struct rt_rq and functions connected with it: nobody uses it since now. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Ingo Molnar authored
Merge in fixes before applying ongoing new work. Signed-off-by: -
Steven Rostedt authored
Dave Jones hit the following bug report: =============================== [ INFO: suspicious RCU usage. ] 3.10.0-rc2+ #1 Not tainted ------------------------------- include/linux/rcupdate.h:771 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 2 locks held by cc1/63645: #0: (&rq->lock){-.-.-.}, at: [<ffffffff816b39fd>] __schedule+0xed/0x9b0 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8109d645>] cpuacct_charge+0x5/0x1f0 CPU: 1 PID: 63645 Comm: cc1 Not tainted 3.10.0-rc2+ #1 [loadavg: 40.57 27.55 13.39 25/277 64369] Hardware name: Gigabyte Technology Co., Ltd. GA-MA78GM-S2H/GA-MA78GM-S2H, BIOS F12a 04/23/2010 0000000000000000 ffff88010f78fcf8 ffffffff816ae383 ffff88010f78fd28 ffffffff810b698d ffff88011c092548 000000000023d073 ffff88011c092500 0000000000000001 ffff88010f78fd60 ffffffff8109d7c5 ffffffff8109d645 Call Trace: [<ffffffff816ae383>] dump_stack+0x19/0x1b [<ffffffff810b698d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff8109d7c5>] cpuacct_charge+0x185/0x1f0 [<ffffffff8109d645>] ? cpuacct_charge+0x5/0x1f0 [<ffffffff8108dffc>] update_curr+0xec/0x240 [<ffffffff8108f528>] put_prev_task_fair+0x228/0x480 [<ffffffff816b3a71>] __schedule+0x161/0x9b0 [<ffffffff816b4721>] preempt_schedule+0x51/0x80 [<ffffffff816b4800>] ? __cond_resched_softirq+0x60/0x60 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e [<ffffffff810ff3cc>] ftrace_ops_control_func+0x1dc/0x210 [<ffffffff816be280>] ftrace_call+0x5/0x2f [<ffffffff816b681d>] ? retint_careful+0xb/0x2e [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b4805>] ? schedule_user+0x5/0x70 [<ffffffff816b6824>] ? retint_careful+0x12/0x2e ------------[ cut here ]------------ What happened was that the function tracer traced the schedule_user() code that tells RCU that the system is coming back from userspace, and to add the CPU back to the RCU monitoring. Because the function tracer does a preempt_disable/enable_notrace() calls the preempt_enable_notrace() checks the NEED_RESCHED flag. If it is set, then preempt_schedule() is called. But this is called before the user_exit() function can inform the kernel that the CPU is no longer in user mode and needs to be accounted for by RCU. The fix is to create a new preempt_schedule_context() that checks if the kernel is still in user mode and if so to switch it to kernel mode before calling schedule. It also switches back to user mode coming back from schedule in need be. The only user of this currently is the preempt_enable_notrace(), which is only used by the tracing subsystem. Signed-off-by: -
Vincent Guittot authored
I have faced a sequence where the Idle Load Balance was sometime not triggered for a while on my platform, in the following scenario: CPU 0 and CPU 1 are running tasks and CPU 2 is idle CPU 1 kicks the Idle Load Balance CPU 1 selects CPU 2 as the new Idle Load Balancer CPU 2 sets NOHZ_BALANCE_KICK for CPU 2 CPU 2 sends a reschedule IPI to CPU 2 While CPU 3 wakes up, CPU 0 or CPU 1 migrates a waking up task A on CPU 2 CPU 2 finally wakes up, runs task A and discards the Idle Load Balance task A quickly goes back to sleep (before a tick occurs on CPU 2) CPU 2 goes back to idle with NOHZ_BALANCE_KICK set Whenever CPU 2 will be selected as the ILB, no reschedule IPI will be sent because NOHZ_BALANCE_KICK is already set and no Idle Load Balance will be performed. We must wait for the sched softirq to be raised on CPU 2 thanks to another part the kernel to come back to clear NOHZ_BALANCE_KICK. The proposed solution clears NOHZ_BALANCE_KICK in schedule_ipi if we can't raise the sched_softirq for the Idle Load Balance. Change since V1: - move the clear of NOHZ_BALANCE_KICK in got_nohz_idle_kick if the ILB can't run on this CPU (as suggested by Peter) Signed-off-by:Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by:
-
- 31 May, 2013 2 commits
-
-
Andrew Jones authored
Commit 316ad248 ("sched/x86: Rewrite set_cpu_sibling_map()") broke the construction of sibling maps, which also broke the booted_cores accounting. Before the rewrite, if smt was present, then each map was updated for each smt sibling. After the rewrite only cpu_sibling_mask gets updated, as the llc and core maps depend on 'has_mc = x86_max_cores > 1' instead. This leads to problems with topologies like the following (qemu -smp sockets=2,cores=1,threads=2) processor : 0 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 1 physical id : 0 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 processor : 2 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 1 processor : 3 physical id : 1 siblings : 1 <= should be 2 core id : 0 cpu cores : 0 <= should be 1 This patch restores the former construction by defining has_mc as (has_smt || x86_max_cores > 1). This should be fine as there were no (has_smt && !has_mc) conditions in the context. Aso rename has_mc to has_mp now that it's not just for cores. Signed-off-by:
Andrew Jones <drjones@redhat.com> Acked-by:
-
Kamalesh Babulal authored
Commit 78becc27 ("sched: Use an accessor to read the rq clock") introduces rq_clock(), which obsoletes the use of the "rq" variable in expire_cfs_rq_runtime() and triggers this build warning: kernel/sched/fair.c: In function 'expire_cfs_rq_runtime': kernel/sched/fair.c:2159:13: warning: unused variable 'rq' [-Wunused-variable] Signed-off-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Paul Turner <pjt@google.com> Cc: peterz@infradead.org Link: http://lkml.kernel.org/r/1369904660-14169-1-git-send-email-kamalesh@linux.vnet.ibm.comSigned-off-by:
-
- 30 May, 2013 5 commits
-
-
Linus Torvalds authored
Merge mn10300 fixes from David Howells. * emailed patches from David Howells <dhowells@redhat.com>: MN10300: Need pci_iomap() and __pci_ioport_map() defining MN10300: ASB2305's PCI code needs the definition of XIRQ1 MN10300: Enable IRQs more in system call exit work path MN10300: Fix ret_from_kernel_thread
-
David Howells authored
Include the generic definitions of pci_iomap() and __pci_ioport_map() otherwise we can get errors like: lib/pci_iomap.c: In function 'pci_iomap': lib/pci_iomap.c:37: error: implicit declaration of function '__pci_ioport_map' lib/pci_iomap.c:37: warning: return makes pointer from integer without a cast and: drivers/pci/quirks.c: In function 'disable_igfx_irq': drivers/pci/quirks.c:2893: error: implicit declaration of function 'pci_iomap' drivers/pci/quirks.c:2893: warning: initialization makes pointer from integer without a cast drivers/pci/quirks.c: In function 'reset_ivb_igd': drivers/pci/quirks.c:3133: warning: assignment makes pointer from integer without a cast Signed-off-by:
David Howells <dhowells@redhat.com> Acked-by:
Ken Cox <jkc@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
The code for PCI in the ASB2305 needs the definition of XIRQ1 from proc/irq.h otherwise the following error appears: arch/mn10300/unit-asb2305/pci.c: In function 'unit_pci_init': arch/mn10300/unit-asb2305/pci.c:481: error: 'XIRQ1' undeclared (first use in this function) arch/mn10300/unit-asb2305/pci.c:481: error: (Each undeclared identifier is reported only once arch/mn10300/unit-asb2305/pci.c:481: error: for each function it appears in.) Signed-off-by:
-
David Howells authored
Enable IRQs when calling schedule() for TIF_NEED_RESCHED and do_notify_resume(). If interrupts are enabled during do_notify_resume(), a warning can be seen (see lower down). Whilst we're at it, resume_userspace can be made local to entry.S as it is not called outside of there and it can be merged with the part of work_resched that occurs after schedule() is called. WARNING: at kernel/softirq.c:160 local_bh_enable+0x42/0xa0() Call Trace: local_bh_enable+0x42/0xa0 unix_release_sock+0x86/0x23c unix_release+0x20/0x28 sock_release+0x17/0x88 sock_close+0x20/0x28 __fput+0xc9/0x1fc ____fput+0xb/0x10 task_work_run+0x64/0x78 do_notify_resume+0x53d/0x544 work_notifysig+0xa/0xc Signed-off-by: -
David Howells authored
ret_from_kernel_thread needs to set A2 to the thread_info pointer before jumping to syscall_exit. Without this, we never correctly start userspace. This was caused by the rejuggling of the fork/exec paths in commit ddf23e87 ("mn10300: switch to saner kernel_execve() semantics") Reported-by:
Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
- 29 May, 2013 3 commits
-
-
Linus Torvalds authored
Merge tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin-control fixes from Linus Walleij: - Six patches fixing up the suspend/resume and wakeup handling of the Samsung and Exynos drivers. - Errorpath fixes for four different drivers. All on the probe() errorpath. - Make the debugfs code for pin config take the right mutex. * tag 'pinctrl-fixes-v3.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: pinconf: take the right mutex pinctrl: sunxi: fix error return code in sunxi_pinctrl_probe() pinctrl: exynos: Handle suspend/resume of GPIO EINT registers pinctrl: samsung: Allow per-bank SoC-specific private data pinctrl: samsung: Add support for SoC-specific suspend/resume callbacks pinctrl: Don't override the error code in probe error handling ARM: EXYNOS: Fix EINT wake-up mask configuration when pinctrl is used pinctrl: exynos: Add support for set_irq_wake of wake-up EINTs pinctrl: samsung: fix suspend/resume functionality
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM Exynos fixes from Olof Johansson: "Here's a shorter set of fixes for 3.10, all for Samsung Exynos platforms. It also includes a defconfig update so that exynos_defconfig provides a meaningful set of drivers to boot an unmodified kernel on the Samsung ARM-based Chromebooks." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: defconfig update ARM: SAMSUNG: Add names to fimd0 IRQ resources ARM: EXYNOS: fix software reset logic for EXYNOS5440 SOC ARM: EXYNOS: Fix support of Exynos4210 rev0 SoC ARM: dts: Enabling samsung-usb2phy driver for exynos5250
-
Olof Johansson authored
This turns on a number of configs that are useful on the Chromebook, but also good to have on in general: * USB host and MMC drivers(!) * I2C GPIO arbitration driver * CYAPA trackpad driver * simplefb * CROS EC and keyboard drivers * S5M8767 driver * MAX77686 drivers * MAX8997 driver * DEVTMPFS + mount * DM_CRYPT (as module) * CRYPTOLOOP * HIGHMEM * PRINTK timestamps This also turns off DEBUG_LL, and switches the hardcoded Samsung lowlevel uart to uart 3 (which is only used to show the "uncompressing kernel" message at boot, it seems). Signed-off-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Doug Anderson <dianders@chromium.org> Tested-by:
Tushar Behera <tushar.behera@linaro.org> Acked-by:
Kukjin Kim <kgene.kim@samsung.com>
-
- 28 May, 2013 12 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "This is mostly exynos and intel fixes, along with some vblank patches I lost from Rob a few months ago that make wayland work better on lots of GPUs, also a qxl kconfig fix." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (22 commits) qxl: fix Kconfig deps - select FB_DEFERRED_IO drm/exynos: replace request_threaded_irq with devm function drm/exynos: remove unnecessary devm_kfree drm/exynos: fix build warnings from ipp fimc drm/exynos: cleanup device pointer usages drm/exynos: wait for the completion of pending page flip drm/exynos: use drm_send_vblank_event() helper drm/i915: avoid premature DP AUX timeouts drm/i915: avoid premature timeouts in __wait_seqno() drm/i915: use msecs_to_jiffies_timeout instead of open coding the same drm/i915: add msecs_to_jiffies_timeout to guarantee minimum duration drm/i915: force full modeset if the connector is in DPMS OFF mode drm/exynos: page flip fixes drm/exynos: exynos_hdmi: Pass correct pointer to free_irq() drm/exynos: exynos_drm_ipp: Fix incorrect usage of IS_ERR_OR_NULL drm/exynos: exynos_drm_fbdev: Fix incorrect usage of IS_ERR_OR_NULL drm/imx: use drm_send_vblank_event() helper drm/shmob: use drm_send_vblank_event() helper drm/radeon: use drm_send_vblank_event() helper drm/nouveau: use drm_send_vblank_event() helper ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This push fixes a crash in the new sha256_ssse3 driver as well as a DMA setup/teardown bug in caam" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: sha256_ssse3 - fix stack corruption with SSSE3 and AVX implementations crypto: caam - fix inconsistent assoc dma mapping direction
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Fixes for a couple of DFS problems, a problem with extended security negotiation and two other small cifs fixes" * 'for-3.10' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix composing of mount options for DFS referrals cifs: stop printing the unc= option in /proc/mounts cifs: fix error handling when calling cifs_parse_devname cifs: allow sec=none mounts to work against servers that don't support extended security cifs: fix potential buffer overrun when composing a new options string cifs: only set ops for inodes in I_NEW state
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Two more fixes: The first one was reported by Mauro Carvalho Chehab, where if a poll() is done against a trace buffer for a CPU that has never been online, it will crash the kernel, as buffers are only created when a CPU comes on line, but the trace files are for all possible CPUs. This fix is to check if the buffer was allocated and if not return -EINVAL. That was the simple fix, the real fix is a bit more complex and not for a -rc release. We could have the files created when the CPUs come online. That would require some design changes. The second one was reported by Peter Zijlstra. If the kernel command line has ftrace=nop, it will lock up the system on boot up. This is because the new design for 3.10 has the nop tracer bootstrap the tracing subsystem. When ftrace=<trace> is defined, when a that tracer is registered, it starts the tracing, but uses the nop tracer to clear things out. What happened here was that ftrace=nop caused the registering of nop to start it and use nop before it was initialized. The only thing nop needs to have done to initialize it is to have the tracer point its current_tracer structure member to the nop tracer. Doing that before registering the nop tracer makes everything work." * tag 'trace-fixes-v3.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Do not poll non allocated cpu buffers tracing: Fix crash when ftrace=nop on the kernel command line
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: - futex support that I had missed before, - A long-overdue update of the m68k defconfigs. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Update defconfigs for v3.9 m68k: implement futex.h to support userspace robust futexes and PI mutexes
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze fixes from Michal Simek: "One patch fix futex support and my patches fix warnings which were reported by Geert's regression testing" * 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Reversed logic in futex cmpxchg microblaze: Use proper casting for inb/inw/inl in io.h microblaze: Initialize temp variable to remove compilation warning
-
Steven Rostedt (Red Hat) authored
The tracing infrastructure sets up for possible CPUs, but it uses the ring buffer polling, it is possible to call the ring buffer polling code with a CPU that hasn't been allocated. This will cause a kernel oops when it access a ring buffer cpu buffer that is part of the possible cpus but hasn't been allocated yet as the CPU has never been online. Reported-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Tested-by:
-
Stanislaw Gruszka authored
Simple cleanup. Reported-by:
Stanislaw Gruszka <sgruszka@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1367501673-6563-1-git-send-email-sgruszka@redhat.comSigned-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org>
-
Frederic Weisbecker authored
Read the runqueue clock through an accessor. This prepares for adding a debugging infrastructure to detect missing or redundant calls to update_rq_clock() between a scheduler's entry and exit point. Signed-off-by:
-
Frederic Weisbecker authored
In this function we are making use of rq->clock right before the update of the rq clock, let's just call update_rq_clock() just before that to avoid using a stale rq clock value. Signed-off-by:
-
Frederic Weisbecker authored
check_preempt_curr() of fair class needs an uptodate sched clock value to update runtime stats of the current task of the target's rq. When a task is woken up, activate_task() is usually called right before ttwu_do_wakeup() unless the task is still in the runqueue. In the latter case we need to update the rq clock explicitly because activate_task() isn't here to do the job for us. Signed-off-by:
-
