- 08 Feb, 2008 40 commits
-
-
Sam Ravnborg authored
Fix following warning: WARNING: o-x86_64/kernel/built-in.o(.text+0x36d8b): Section mismatch in reference from the function enable_nonboot_cpus() to the function .cpuinit.text:_cpu_up() enable_nonboot_cpus() are used solely from CONFIG_CONFIG_PM_SLEEP_SMP=y and PM_SLEEP_SMP imply HOTPLUG_CPU therefore the reference to _cpu_up() is valid. Annotate enable_nonboot_cpus() with __ref to silence modpost. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mike Frysinger authored
Since this header is exported to userspace and all the other types in the header have been scrubbed, this brings the last straggler in line. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Andi Kleen authored
Following the deprecation schedule the a.out ELF interpreter support is removed now with this patch. a.out ELF interpreters were an transition feature for moving a.out systems to ELF, but they're unlikely to be still needed. Pure a.out systems will still work of course. This allows to simplify the hairy ELF loader. Signed-off-by:
Andi Kleen <ak@suse.de> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Pavel Emelyanov authored
The proper behavior to store task's pid and get this task later is to get the struct pid pointer and get the task with the pid_task() call. Make it for rt_mutex_waiter->deadlock_task_pid field. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Pavel Emelyanov authored
All the functions that need to lookup a task by pid in posix timers obtain this pid from a user space, and thus this value refers to a task in the same namespace, as the current task lives in. So the proper behavior is to call find_task_by_vpid() here. Signed-off-by:
-
Paul Clements authored
Remove the arbitrary 128 device limit for NBD. nbds_max can now be set to any number. In certain scenarios where devices are used sparsely we have run into the 128 device limit. Signed-off-by:
Paul Clements <paul.clements@steeleye.com> Signed-off-by:
-
Jiri Slaby authored
Instead of testing hardcoded values, use pci_match_id to reference the pci_device_id table. Sideways, it allows easy new additions to the table. [akpm@linux-foundation.org: remove wrongly-added semicolon] Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Jiri Slaby authored
Use pci_resource_start instead of accessing pci_dev struct internals. Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to udf. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Acked-by:
Cyrill Gorcunov <gorcunov@gmail.com> Acked-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Andrew Morton authored
Documentation/SubmitCheckist, please. Cc: Hugh Dickins <hugh@veritas.com> Cc: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
akpm@linux-foundation.org authored
Add .show_options super operation to tmpfs. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to spufs. Use generic_show_options() and save the complete option string in spufs_fill_super(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to reiserfs. Use generic_show_options() and save the complete option string in reiserfs_fill_super() and reiserfs_remount(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to ncpfs. Small fix: add FS_BINARY_MOUNTDATA to the filesystem type flags, since it can take binary data, as well as text (similarly to NFS). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to isofs. Use generic_show_options() and save the complete option string in isofs_fill_super(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to hugetlbfs. Use generic_show_options() and save the complete option string in hugetlbfs_fill_super(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to hpfs. Use generic_show_options() and save the complete option string in hpfs_fill_super() and hpfs_remount_fs(). Also add a small fix: hpfs_remount_fs() should return -EINVAL on error, instead of 1, which is not an error value. Signed-off-by:
-
Miklos Szeredi authored
Add the "host path" option to /proc/mounts for UML hostfs filesystems. The mount source (mnt_devname) should really be used for this, but not easy to change now in a backward compatible way. Signed-off-by:
-
Miklos Szeredi authored
Add blksize= option to /proc/mounts for fuseblk filesystems. Signed-off-by:
-
Miklos Szeredi authored
Add flush option to /proc/mounts for msdos and vfat filesystems. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Miklos Szeredi authored
Add noreservation option to /proc/mounts for ext2 filesystems. Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to devpts. Small cleanup: when parsing the "mode" option, mask with S_IALLUGO instead of ~S_IFMT. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to capifs. Use generic_show_options() and save the complete option string in capifs_remount(). Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to befs. Use generic_show_options() and save the complete option string in befs_fill_super(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to autofs. Use generic_show_options() and save the complete option string in autofs_fill_super(). Signed-off-by:
-
Miklos Szeredi authored
Add uid= and gid= options to /proc/mounts for autofs4 filesystems. Signed-off-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to afs. Use generic_show_options() and save the complete option string in afs_get_sb(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to affs. Use generic_show_options() and save the complete option string in affs_fill_super() and affs_remount(). Signed-off-by:
-
Miklos Szeredi authored
Add a .show_options super operation to adfs. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Miklos Szeredi authored
Add a new s_options field to struct super_block. Filesystems can save mount options passed to them in mount or remount. It is automatically freed when the superblock is destroyed. A new helper function, generic_show_options() is introduced, which uses this field to display the mount options in /proc/mounts. Another helper function, save_mount_options() may be used by filesystems to save the options in the super block. Signed-off-by:
-
Miklos Szeredi authored
This series addresses the problem of showing mount options in /proc/mounts. Several filesystems which use mount options, have not implemented a .show_options superblock operation. Several others have implemented this callback, but have not kept it fully up to date with the parsed options. Q: Why do we need correct option showing in /proc/mounts? A: We want /proc/mounts to fully replace /etc/mtab. The reasons for this are: - unprivileged mounters won't be able to update /etc/mtab - /etc/mtab doesn't work with private mount namespaces - /etc/mtab can become out-of-sync with reality Q: Can't this be done, so that filesystems need not bother with implementing a .show_mounts callback, and keeping it up to date? A: Only in some cases. Certain filesystems allow modification of a subset of options in their remount_fs method. It is not possible to take this into account without knowing exactly how the filesystem handles options. For the simple case (no remount or remount resets all options) the patchset introduces two helpers: generic_show_options() save_mount_options() These can also be used to emulate the old /etc/mtab behavior, until proper support is added. Even if this is not 100% correct, it's still better than showing no options at all. The following patches fix up most in-tree filesystems, some have been compile tested only, some have been reviewed and acked by the maintainer. Table displaying status of all in-kernel filesystems: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - legend: none - fs has options, but doesn't define ->show_options() some - fs defines ->show_options(), but some only options are shown good - fs shows all options noopt - fs does not have options patch - a patch will be posted merged - a patch has been merged by subsystem maintainer 9p good adfs patch affs patch afs patch autofs patch autofs4 patch befs patch bfs noopt cifs some coda noopt configfs noopt cramfs noopt debugfs noopt devpts patch ecryptfs good efs noopt ext2 patch ext3 good ext4 merged fat patch freevxfs noopt fuse patch fusectl noopt gfs2 good gfs2meta noopt hfs good hfsplus good hostfs patch hpfs patch hppfs noopt hugetlbfs patch isofs patch jffs2 noopt jfs merged minix noopt msdos ->fat ncpfs patch nfs some nfsd noopt ntfs good ocfs2 good ocfs2/dlmfs noopt openpromfs noopt proc noopt qnx4 noopt ramfs noopt reiserfs patch romfs noopt smbfs good sysfs noopt sysv noopt udf patch ufs good vfat ->fat xfs good mm/shmem.c patch drivers/oprofile/oprofilefs.c noopt drivers/infiniband/hw/ipath/ipath_fs.c noopt drivers/misc/ibmasm/ibmasmfs.c noopt drivers/usb/core (usbfs) merged drivers/usb/gadget (gadgetfs) noopt drivers/isdn/capi/capifs.c patch kernel/cpuset.c noopt fs/binfmt_misc.c noopt net/sunrpc/rpc_pipe.c noopt arch/powerpc/platforms/cell/spufs patch arch/s390/hypfs good ipc/mqueue.c noopt security (securityfs) noopt security/selinux/selinuxfs.c noopt kernel/cgroup.c good security/smack/smackfs.c noopt in -mm: reiser4 some unionfs good - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - This patch: Document the rules for handling mount options in the .show_options super operation. Signed-off-by: -
Mike Frysinger authored
Per previous discussions about cleaning up ufs_fs.h, people just want this straight up dropped from userspace export. The only remaining consumer (silo) has been fixed a while ago to not rely on this header. This allows use to move it completely from include/linux/ to fs/ufs/ seeing as how the only in-kernel consumer is fs/ufs/. Signed-off-by:
-
H. Peter Anvin authored
When the conversion factor between jiffies and milli- or microseconds is not a single multiply or divide, as for the case of HZ == 300, we currently do a multiply followed by a divide. The intervening result, however, is subject to overflows, especially since the fraction is not simplified (for HZ == 300, we multiply by 300 and divide by 1000). This is exposed to the user when passing a large timeout to poll(), for example. This patch replaces the multiply-divide with a reciprocal multiplication on 32-bit platforms. When the input is an unsigned long, there is no portable way to do this on 64-bit platforms there is no portable way to do this since it requires a 128-bit intermediate result (which gcc does support on 64-bit platforms but may generate libgcc calls, e.g. on 64-bit s390), but since the output is a 32-bit integer in the cases affected, just simplify the multiply-divide (*3/10 instead of *300/1000). The reciprocal multiply used can have off-by-one errors in the upper half of the valid output range. This could be avoided at the expense of having to deal with a potential 65-bit intermediate result. Since the intent is to avoid overflow problems and most of the other time conversions are only semiexact, the off-by-one errors were considered an acceptable tradeoff. At Ralf Baechle's suggestion, this version uses a Perl script to compute the necessary constants. We already have dependencies on Perl for kernel compiles. This does, however, require the Perl module Math::BigInt, which is included in the standard Perl distribution starting with version 5.8.0. In order to support older versions of Perl, include a table of canned constants in the script itself, and structure the script so that Math::BigInt isn't required if pulling values from said table. Running the script requires that the HZ value is available from the Makefile. Thus, this patch also adds the Kconfig variable CONFIG_HZ to the architectures which didn't already have it (alpha, cris, frv, h8300, m32r, m68k, m68knommu, sparc, v850, and xtensa.) It does *not* touch the sh or sh64 architectures, since Paul Mundt has dealt with those separately in the sh tree. Signed-off-by:
-
Joe Perches authored
Makes an embedded image a bit smaller. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Christoph Hellwig authored
do_generic_mapping_read was used by gfs2 for internals reads, but this use of the interface was rather suboptimal (as was the whole interface) and has been replaced by an internal helper now. This patch kills do_generic_mapping_read and surrounding damage in preparation of additional cleanups for the buffered read path. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Mike Frysinger authored
All of the asm-*/types.h headers have been updated to no longer check __STRICT_ANSI__ for the 64bit types, so this brings linux/types.h in line. Signed-off-by:
-
Andi Kleen authored
No BKL needed in pipe_ioctl Signed-off-by:
-
David Brownell authored
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
David Brownell authored
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by:
-
Jan Engelhardt authored
Signed-off-by:
Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by:
-
