A function name represents the pointer to it - no need to take the
address of it. (Fixing this helps us introduce some macro magic
around register_nmi_handler() in the future.)

Cc: Robert Richter <robert.richter@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

This patch implements 64 bit counter support for IBS. The
sampling period is no longer limited to the hw counter width.

The functions perf_event_set_period() and
perf_event_try_update() can be used as generic functions. They
can replace similar code that is duplicate across architectures.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-5-git-send-email-robert.richter@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Add code to control the IBS pmu. We need to maintain per-cpu
states. Since some states are used and changed by the nmi
handler, access to these states must be atomic.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-4-git-send-email-robert.richter@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

This patch implements code to handle ibs interrupts. If ibs data
is available a raw perf_event data sample is created and sent
back to the userland. This patch only implements the storage of
ibs data in the raw sample, but this could be extended in a
later patch by generating generic event data such as the rip
from the ibs sampling data.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-3-git-send-email-robert.richter@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

This patch implements perf configuration for AMD IBS. The IBS
pmu is selected using the type attribute in sysfs. There are two
types of ibs pmus, for instruction fetch (IBS_FETCH) and for
instruction execution (IBS_OP):

 /sys/bus/event_source/devices/ibs_fetch/type
 /sys/bus/event_source/devices/ibs_op/type

Except for the sample period IBS can only be set up with raw
config values and raw data samples. The event attributes for the
syscall should be programmed like this (IBS_FETCH):

        type = get_pmu_type("/sys/bus/event_source/devices/ibs_fetch/type");

        memset(&attr, 0, sizeof(attr));
        attr.type        = type;
        attr.sample_type = PERF_SAMPLE_CPU | PERF_SAMPLE_RAW;
        attr.config      = IBS_FETCH_CONFIG_DEFAULT;

This implementation does not yet support 64 bit counters. It is
limited to the hardware counter bit width which is 20 bits. 64
bit support can be added later.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1323968199-9326-2-git-send-email-robert.richter@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Split out optprobe related code to arch/x86/kernel/kprobes-opt.c
for maintenanceability.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Suggested-by: Ingo Molnar <mingo@elte.hu>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133222.5982.54794.stgit@localhost.localdomain
[ Tidied up the code a tiny bit ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Fix a bug in kprobes which can modify kernel code
permanently at run-time. In the result, kernel can
crash when it executes the modified code.

This bug can happen when we put two probes enough near
and the first probe is optimized. When the second probe
is set up, it copies a byte which is already modified
by the first probe, and executes it when the probe is hit.
Even worse, the first probe and the second probe are removed
respectively, the second probe writes back the copied
(modified) instruction.

To fix this bug, kprobes always recovers the original
code and copies the first byte from recovered instruction.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133215.5982.31991.stgit@localhost.localdomainSigned-off-by: Ingo Molnar <mingo@elte.hu>

Current probed-instruction recovery expects that only breakpoint
instruction modifies instruction. However, since kprobes jump
optimization can replace original instructions with a jump,
that expectation is not enough. And it may cause instruction
decoding failure on the function where an optimized probe
already exists.

This bug can reproduce easily as below:

1) find a target function address (any kprobe-able function is OK)

 $ grep __secure_computing /proc/kallsyms
   ffffffff810c19d0 T __secure_computing

2) decode the function
   $ objdump -d vmlinux --start-address=0xffffffff810c19d0 --stop-address=0xffffffff810c19eb

  vmlinux:     file format elf64-x86-64

Disassembly of section .text:

ffffffff810c19d0 <__secure_computing>:
ffffffff810c19d0:       55                      push   %rbp
ffffffff810c19d1:       48 89 e5                mov    %rsp,%rbp
ffffffff810c19d4:       e8 67 8f 72 00          callq
ffffffff817ea940 <mcount>
ffffffff810c19d9:       65 48 8b 04 25 40 b8    mov    %gs:0xb840,%rax
ffffffff810c19e0:       00 00
ffffffff810c19e2:       83 b8 88 05 00 00 01    cmpl $0x1,0x588(%rax)
ffffffff810c19e9:       74 05                   je     ffffffff810c19f0 <__secure_computing+0x20>

3) put a kprobe-event at an optimize-able place, where no
 call/jump places within the 5 bytes.
 $ su -
 # cd /sys/kernel/debug/tracing
 # echo p __secure_computing+0x9 > kprobe_events

4) enable it and check it is optimized.
 # echo 1 > events/kprobes/p___secure_computing_9/enable
 # cat ../kprobes/list
 ffffffff810c19d9  k  __secure_computing+0x9    [OPTIMIZED]

5) put another kprobe on an instruction after previous probe in
  the same function.
 # echo p __secure_computing+0x12 >> kprobe_events
 bash: echo: write error: Invalid argument
 # dmesg | tail -n 1
 [ 1666.500016] Probing address(0xffffffff810c19e2) is not an instruction boundary.

6) however, if the kprobes optimization is disabled, it works.
 # echo 0 > /proc/sys/debug/kprobes-optimization
 # cat ../kprobes/list
 ffffffff810c19d9  k  __secure_computing+0x9
 # echo p __secure_computing+0x12 >> kprobe_events
 (no error)

This is because kprobes doesn't recover the instruction
which is overwritten with a relative jump by another kprobe
when finding instruction boundary.
It only recovers the breakpoint instruction.

This patch fixes kprobes to recover such instructions.

With this fix:

 # echo p __secure_computing+0x9 > kprobe_events
 # echo 1 > events/kprobes/p___secure_computing_9/enable
 # cat ../kprobes/list
 ffffffff810c1aa9  k  __secure_computing+0x9    [OPTIMIZED]
 # echo p __secure_computing+0x12 >> kprobe_events
 # cat ../kprobes/list
 ffffffff810c1aa9  k  __secure_computing+0x9    [OPTIMIZED]
 ffffffff810c1ab2  k  __secure_computing+0x12    [DISABLED]

Changes in v4:
 - Fix a bug to ensure optimized probe is really optimized
   by jump.
 - Remove kprobe_optready() dependency.
 - Cleanup code for preparing optprobe separation.

Changes in v3:
 - Fix a build error when CONFIG_OPTPROBE=n. (Thanks, Ingo!)
   To fix the error, split optprobe instruction recovering
   path from kprobes path.
 - Cleanup comments/styles.

Changes in v2:
 - Fix a bug to recover original instruction address in
   RIP-relative instruction fixup.
 - Moved on tip/master.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: systemtap@sourceware.org
Cc: anderson@redhat.com
Link: http://lkml.kernel.org/r/20120305133209.5982.36568.stgit@localhost.localdomainSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Improvements for 'perf annotate' from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If perf.data couldn't find vmlinux image for the given build-id,
it would print error message. However it lacked a newline at the
end, so the output looked like below:

 $ perf annotate --stdio
 No vmlinux file with build id 63b554b2e90f14a4bced200008865e757d3e8b36
 was found in the path.

 Please use:

   perf buildid-cache -av vmlinux

 or:

   --vmlinux vmlinux Percent |   Source code & Disassembly of a.out
 ------------------------------------------------
          :
          :
          :
          :      Disassembly of section .text:
          :
          :      00000000004004f4 <foo>:
     0.00 :        4004f4:       push   %rbp
     0.00 :        4004f5:       mov    %rsp,%rbp
     0.00 :        4004f8:       movl   $0x0,-0x4(%rbp)
     0.00 :        4004ff:       jmp    400517 <foo+0x23>
    14.70 :        400501:       mov    0x200b28(%rip),%rax        # 601030 <count>
     0.02 :        400508:       add    $0x1,%rax
     0.01 :        40050c:       mov    %rax,0x200b1d(%rip)        # 601030 <count>
     0.01 :        400513:       addl   $0x1,-0x4(%rbp)
    13.92 :        400517:       cmpl   $0x98967f,-0x4(%rbp)
    71.33 :        40051e:       jle    400501 <foo+0xd>
     0.00 :        400520:       leaveq
     0.00 :        400521:       retq

Fix it by adding a newline at the end of the message. It doesn't affect
the tui output AFAICS. New output will look like this:

 ...
 or:

   --vmlinux vmlinux
  Percent |   Source code & Disassembly of a.out
 ------------------------------------------------
          :
          :
          :
          :      Disassembly of section .text:
 ...

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-6-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Separate multiple binding using /, capitalize descriptions, add missing
key binding.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-5-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

On tui annotation, the title was set to name of the target symbol if
user selects the target. However it remained after returning to original
symbol from the target. Fix it.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-4-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Accepting upper case character only is unconvenient since it requires
SHIFT key too. Why not change to it accept a simple key stroke?

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-3-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Print unselected asm code lines as blue. This is what we do now for
--stdio.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329986784-4916-2-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

There are some variable arguments can be specified on make invocation,
but some of them are missing descriptions so that user cannot be
informed easily. Fix it.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329980894-4289-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If perf_evsel__open() failed, the errno was set and returned properly.

However since the perf_evlist__open() called close() on fd's for all of
evsel x cpu x thread after the failure, the errno was overridden by
other code (EBADF). So the caller of the function ended up seeing
different error message and getting confused.

Fit it by restoring original return value. Because one of caller of the
function is in the python extension, and it uses system errno
internally, it'd be better restoring the original value rather than
using the return value of the function directly, IMHO (i.e. I'm not a
python expert :)

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329966816-23175-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Conflicts:
	tools/perf/builtin-record.c
	tools/perf/builtin-top.c
	tools/perf/perf.h
	tools/perf/util/top.h

Merge reason: resolve these cherry-picking conflicts.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Cherry picked fixes from perf/core, together with the kernel fix (1018faa6),
the sampling tools (top, record) are back working on AMD systems.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Just fall back to resetting those fields, if set, warning the user that
that feature is not available.

If guest samples appear they will just be discarded because no struct
machine will be found and thus the event will be accounted as not
handled and dropped, see 0c095715.
Reported-by: Namhyung Kim <namhyung@gmail.com>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vuwxig36mzprl5n7nzvnxxsh@git.kernel.orgSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Setting perf_guest to true by default makes no sense because the perf
subcommands can not setup guest symbol information and thus not process
and guest samples. The only exception is perf-kvm which changes the
perf_guest value on its own.  So change the default for perf_guest back
to false.

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1328893505-4115-3-git-send-email-joerg.roedel@amd.comSigned-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

A recent refactoring of perf-record introduced the following:

perf record -a -B
Couldn't generating buildids. Use --no-buildid to profile anyway.
sleep: Terminated

I believe the triple negative was meant to be only a double negative.
:-) While I'm there, fixed the grammar on the error message.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1328567272-13190-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It turned out that a performance counter on AMD does not
count at all when the GO or HO bit is set in the control
register and SVM is disabled in EFER.

This patch works around this issue by masking out the HO bit
in the performance counter control register when SVM is not
enabled.

The GO bit is not touched because it is only set when the
user wants to count in guest-mode only. So when SVM is
disabled the counter should not run at all and the
not-counting is the intended behaviour.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Avi Kivity <avi@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: stable@vger.kernel.org # v3.2
Link: http://lkml.kernel.org/r/1330523852-19566-1-git-send-email-joerg.roedel@amd.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Various smaller perf/urgent fixes.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The 'perf probe' command allows kprobe to be inserted at any offset from
a function start, which results in adding kprobes to unintended
location.  (example: perf probe do_fork+10000 is allowed even though
size of do_fork is ~904).

My previous patch https://lkml.org/lkml/2012/2/24/42 addressed the case
where DWARF info was available for the kernel. This patch fixes the
case where perf probe is used on a kernel without debuginfo available.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F4C544D.1010909@linux.vnet.ibm.comSigned-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

If threads in a multi-threaded process have names shorter than the main
thread the comm for the named threads is not properly terminated.

E.g., for the process 'namedthreads' where each thread is named noploop%d
where %d is the thread number:

Before:
    perf script -f comm,tid,ip,sym,dso
    noploop:4ads 21616  400a49 noploop (/tmp/namedthreads)
The 'ads' in the thread comm bleeds over from the process name.

After:
    perf script -f comm,tid,ip,sym,dso
       noploop:4 21616  400a49 noploop (/tmp/namedthreads)

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1330111898-68071-1-git-send-email-dsahern@gmail.comSigned-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The perf probe command allows kprobe to be inserted at any offset from a
function start, which results in adding kprobes to unintended location.

Example: perf probe do_fork+10000 is allowed even though size of do_fork
is ~904.

This patch will ensure probe addition fails when the offset specified is
greater than size of the function.
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/4F473F33.4060409@linux.vnet.ibm.comSigned-off-by: Prashanth Nageshappa <prashanth@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

On old kernels that don't support sample_id_all feature,
perf_evlist__id2evsel() returns NULL for non-sampling events.

This breaks perf top when multiple events are given on command line. Fix
it by using first evsel in the evlist. This will also prevent getting
the same (potential) problem in such new tool/ old kernel combo.
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1329702447-25045-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

In the jump label enabled case, calling static_key_enabled()
results in a function call. The function returns the results of
a compare, so it really doesn't need the overhead of a full
function call. Let's make it 'static inline' for both the jump
label enabled and disabled cases.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: a.p.zijlstra@chello.nl
Cc: rostedt@goodmis.org
Cc: mathieu.desnoyers@polymtl.ca
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/201202281849.q1SIn1p2023270@int-mx10.intmail.prod.int.phx2.redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: After much naming discussion, there seems to be consensus
              now - queue it up for v3.4.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If kzalloc() for TYPE_DATA failed on a given cpu, previous chunk
of TYPE_INST will be leaked. Fix it.

Thanks to Peter Zijlstra for suggesting this better solution. It
should work as long as the initial value of the region is all
0's and that's the case of static (per-cpu) memory allocation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1330391978-28070-1-git-send-email-namhyung.kim@lge.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Here are some trivial NTFS changes (a spelling fix and two use before
NULL check cases found by Coverity as well as an update in MAINTAINERS
for the path to the ntfs git repo) together with a simple LDM fix for
parsing fragmented VBLKs.

* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs:
  NTFS: Update git repo path in MAINTAINERS file.
  LDM: Fix reassembly of extended VBLKs.
  NTFS: Correct two spelling errors "dealocate" to "deallocate" in mft.c.
  NTFS: Do not dereference pointer before checking for NULL.
  NTFS: Remove unused variable.

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce/AMD: Fix UP build error
  x86: Specify a size for the cmp in the NMI handler
  x86/nmi: Test saved %cs in NMI to determine nested NMI case
  x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processors
  x86/microcode: Remove noisy AMD microcode warning

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/events: Revert trace_sched_stat_sleeptime()

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Handle pending irqs in irq_startup()
  genirq: Unmask oneshot irqs when thread was not woken

The new is_compat_task() define for the !COMPAT case in
include/linux/compat.h conflicts with a similar define in
arch/s390/include/asm/compat.h.

This is the minimal patch which fixes the build issues.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Anton Altaparmakov <anton@tuxera.com>

Merge branch 'tip/perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace into perf/core

Merge tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Two fixes to fix a memory corruption bug when WC pages never get
converted back to WB but end up being recycled in the general memory
pool as WC.

There is a better way of fixing this, but there is not enough time to do
the full benchmarking to pick one of the right options - so picking the
one that favors stability for right now.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* tag 'stable/for-linus-fixes-3.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/pat: Disable PAT support for now.
  xen/setup: Remove redundant filtering of PTE masks.

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  mod/file2alias: make modpost compile on darwin again