- 27 May, 2021 23 commits
-
-
Paolo Bonzini authored
The test takes a long time with the current implementation of memslots, so cut the run time a bit. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Joe Richey authored
Replace BIT() in KVM's UPAI header with _BITUL(). BIT() is not defined in the UAPI headers and its usage may cause userspace build errors. Fixes: fb04a1ed ("KVM: X86: Implement ring-based dirty memory tracking") Signed-off-by:
Joe Richey <joerichey@google.com> Message-Id: <20210521085849.37676-3-joerichey94@gmail.com> Signed-off-by:
-
Axel Rasmussen authored
This lets us run the demand paging test on top of a shared hugetlbfs-backed area. The "shared" is key, as this allows us to exercise userfaultfd minor faults on hugetlbfs. Signed-off-by:
Axel Rasmussen <axelrasmussen@google.com> Message-Id: <20210519200339.829146-11-axelrasmussen@google.com> Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
Axel Rasmussen authored
UFFD handling of MINOR faults is a new feature whose use case is to speed up demand paging (compared to MISSING faults). So, it's interesting to let this selftest exercise this new mode. Modify the demand paging test to have the option of using UFFD minor faults, as opposed to missing faults. Now, when turning on userfaultfd with '-u', the desired mode has to be specified ("MISSING" or "MINOR"). If we're in minor mode, before registering, prefault via the *alias*. This way, the guest will trigger minor faults, instead of missing faults, and we can UFFDIO_CONTINUE to resolve them. Modify the page fault handler function to use the right ioctl depending on the mode we're running in. In MINOR mode, use UFFDIO_CONTINUE. Signed-off-by: -
Axel Rasmussen authored
When a memory region is added with a src_type specifying that it should use some kind of shared memory, also create an alias mapping to the same underlying physical pages. And, add an API so tests can get access to these alias addresses. Basically, for a guest physical address, let us look up the analogous host *alias* address. In a future commit, we'll modify the demand paging test to take advantage of this to exercise UFFD minor faults. The idea is, we pre-fault the underlying pages *via the alias*. When the *guest* faults, it gets a "minor" fault (PTEs don't exist yet, but a page is already in the page cache). Then, the userfaultfd theads can handle the fault: they could potentially modify the underlying memory *via the alias* if they wanted to, and then they install the PTEs and let the guest carry on via a UFFDIO_CONTINUE ioctl. Reviewed-by:
-
Axel Rasmussen authored
This lets us run the demand paging test on top of a shmem-backed area. In follow-up commits, we'll 1) leverage this new capability to create an alias mapping, and then 2) use the alias mapping to exercise UFFD minor faults. Signed-off-by:
-
Axel Rasmussen authored
Each struct vm_mem_backing_src_alias has a flags field, which denotes the flags used to mmap() an area of that type. Previously, this field never included MAP_PRIVATE | MAP_ANONYMOUS, because vm_userspace_mem_region_add assumed that *all* types would always use those flags, and so it hardcoded them. In a follow-up commit, we'll add a new type: shmem. Areas of this type must not have MAP_PRIVATE | MAP_ANONYMOUS, and instead they must have MAP_SHARED. So, refactor things. Make it so that the flags field of struct vm_mem_backing_src_alias really is a complete set of flags, and don't add in any extras in vm_userspace_mem_region_add. This will let us easily tack on shmem. Signed-off-by:
-
Axel Rasmussen authored
Add an argument which lets us specify a different backing memory type for the test. The default is just to use anonymous, matching existing behavior. This is in preparation for testing UFFD minor faults. For that, we'll need to use a new backing memory type which is setup with MAP_SHARED. Signed-off-by:
-
Axel Rasmussen authored
This is a preparatory commit needed before we can use different kinds of backing pages for guest memory. Previously, we used perf_test_args.host_page_size, which is the host's native page size (commonly 4K). For VM_MEM_SRC_ANONYMOUS this turns out to be okay, but in a follow-up commit we want to allow using different kinds of backing memory. Take VM_MEM_SRC_ANONYMOUS_HUGETLB for example. Without this change, if we used that backing page type, when we issued a UFFDIO_COPY ioctl we'd only do so with 4K, rather than the full 2M of a backing hugepage. In this case, UFFDIO_COPY returns -EINVAL (__mcopy_atomic_hugetlb checks the size). Signed-off-by:
-
Axel Rasmussen authored
A small cleanup. Our caller writes: r = setup_demand_paging(...); if (r < 0) exit(-r); Since we're just going to exit anyway, instead of returning an error we can just re-use TEST_ASSERT. This makes the caller simpler, as well as the function itself - no need to write our branches, etc. Signed-off-by:
-
David Matlack authored
If a KVM selftest is run on a machine without /dev/kvm, it will exit silently. Make it easy to tell what's happening by printing an error message. Opportunistically consolidate all codepaths that open /dev/kvm into a single function so they all print the same message. This slightly changes the semantics of vm_is_unrestricted_guest() by changing a TEST_ASSERT() to exit(KSFT_SKIP). However vm_is_unrestricted_guest() is only called in one place (x86_64/mmio_warning_test.c) and that is to determine if the test should be skipped or not. Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20210511202120.1371800-1-dmatlack@google.com> Signed-off-by:
-
Axel Rasmussen authored
Some trivial fixes I found while touching related code in this series, factored out into a separate commit for easier reviewing: - s/gor/got/ and add a newline in demand_paging_test.c - s/backing_src/src_type/ in a comment to be consistent with the real function signature in kvm_util.c Signed-off-by:
-
David Matlack authored
If /dev/kvm is not available then hardware_disable_test will hang indefinitely because the child process exits before posting to the semaphore for which the parent is waiting. Fix this by making the parent periodically check if the child has exited. We have to be careful to forward the child's exit status to preserve a KSFT_SKIP status. I considered just checking for /dev/kvm before creating the child process, but there are so many other reasons why the child could exit early that it seemed better to handle that as general case. Tested: $ ./hardware_disable_test /dev/kvm not available, skipping test $ echo $? 4 $ modprobe kvm_intel $ ./hardware_disable_test $ echo $? 0 Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
David Matlack authored
Similar to CPUID.0DH.0H this entry depends on the vCPU's XCR0 register and IA32_XSS MSR. Since this test does not control for either before assigning the vCPU's CPUID, these entries will not necessarily match the supported CPUID exposed by KVM. This fixes get_cpuid_test on Cascade Lake CPUs. Suggested-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
David Matlack authored
vm_get_max_gfn() casts vm->max_gfn from a uint64_t to an unsigned int, which causes the upper 32-bits of the max_gfn to get truncated. Nobody noticed until now likely because vm_get_max_gfn() is only used as a mechanism to create a memslot in an unused region of the guest physical address space (the top), and the top of the 32-bit physical address space was always good enough. This fix reveals a bug in memslot_modification_stress_test which was trying to create a dummy memslot past the end of guest physical memory. Fix that by moving the dummy memslot lower. Fixes: 52200d0d ("KVM: selftests: Remove duplicate guest mode handling") Reviewed-by:
Venkatesh Srinivas <venkateshs@chromium.org> Signed-off-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
-
Maciej S. Szmigiero authored
This benchmark contains the following tests: * Map test, where the host unmaps guest memory while the guest writes to it (maps it). The test is designed in a way to make the unmap operation on the host take a negligible amount of time in comparison with the mapping operation in the guest. The test area is actually split in two: the first half is being mapped by the guest while the second half in being unmapped by the host. Then a guest <-> host sync happens and the areas are reversed. * Unmap test which is broadly similar to the above map test, but it is designed in an opposite way: to make the mapping operation in the guest take a negligible amount of time in comparison with the unmap operation on the host. This test is available in two variants: with per-page unmap operation or a chunked one (using 2 MiB chunk size). * Move active area test which involves moving the last (highest gfn) memslot a bit back and forth on the host while the guest is concurrently writing around the area being moved (including over the moved memslot). * Move inactive area test which is similar to the previous move active area test, but now guest writes all happen outside of the area being moved. * Read / write test in which the guest writes to the beginning of each page of the test area while the host writes to the middle of each such page. Then each side checks the values the other side has written. This particular test is not expected to give different results depending on particular memslots implementation, it is meant as a rough sanity check and to provide insight on the spread of test results expected. Each test performs its operation in a loop until a test period ends (this is 5 seconds by default, but it is configurable). Then the total count of loops done is divided by the actual elapsed time to give the test result. The tests have a configurable memslot cap with the "-s" test option, by default the system maximum is used. Each test is repeated a particular number of times (by default 20 times), the best result achieved is printed. The test memory area is divided equally between memslots, the reminder is added to the last memslot. The test area size does not depend on the number of memslots in use. The tests also measure the time that it took to add all these memslots. The best result from the tests that use the whole test area is printed after all the requested tests are done. In general, these tests are designed to use as much memory as possible (within reason) while still doing 100+ loops even on high memslot counts with the default test length. Increasing the test runtime makes it increasingly more likely that some event will happen on the system during the test run, which might lower the test result. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Reviewed-by:
-
Maciej S. Szmigiero authored
The KVM selftest framework was using a simple list for keeping track of the memslots currently in use. This resulted in lookups and adding a single memslot being O(n), the later due to linear scanning of the existing memslot set to check for the presence of any conflicting entries. Before this change, benchmarking high count of memslots was more or less impossible as pretty much all the benchmark time was spent in the selftest framework code. We can simply use a rbtree for keeping track of both of gfn and hva. We don't need an interval tree for hva here as we can't have overlapping memslots because we allocate a completely new memory chunk for each new memslot. Signed-off-by:
-
Paolo Bonzini authored
vm_vaddr_alloc() sets up GVA to GPA mapping page by page; therefore, GPAs may not be continuous if same memslot is used for data and page table allocation. kvm_vm_elf_load() however expects a continuous range of HVAs (and thus GPAs) because it does not try to read file data page by page. Fix this mismatch by allocating memory in one step. Reported-by:
Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
The extra memory pages is missed to be allocated during VM creating. perf_test_util and kvm_page_table_test use it to alloc extra memory currently. Fix it by adding extra_mem_pages to the total memory calculation before allocate. Signed-off-by:
-
Wanpeng Li authored
WARNING: suspicious RCU usage 5.13.0-rc1 #4 Not tainted ----------------------------- ./include/linux/kvm_host.h:710 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by hyperv_clock/8318: #0: ffffb6b8cb05a7d8 (&hv->hv_lock){+.+.}-{3:3}, at: kvm_hv_invalidate_tsc_page+0x3e/0xa0 [kvm] stack backtrace: CPU: 3 PID: 8318 Comm: hyperv_clock Not tainted 5.13.0-rc1 #4 Call Trace: dump_stack+0x87/0xb7 lockdep_rcu_suspicious+0xce/0xf0 kvm_write_guest_page+0x1c1/0x1d0 [kvm] kvm_write_guest+0x50/0x90 [kvm] kvm_hv_invalidate_tsc_page+0x79/0xa0 [kvm] kvm_gen_update_masterclock+0x1d/0x110 [kvm] kvm_arch_vm_ioctl+0x2a7/0xc50 [kvm] kvm_vm_ioctl+0x123/0x11d0 [kvm] __x64_sys_ioctl+0x3ed/0x9d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kvm_memslots() will be called by kvm_write_guest(), so we should take the srcu lock. Fixes: e880c6ea (KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs) Reviewed-by:Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Message-Id: <1621339235-11131-4-git-send-email-wanpengli@tencent.com> Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Wanpeng Li authored
Commit 66570e96 (kvm: x86: only provide PV features if enabled in guest's CPUID) avoids to access pv tlb shootdown host side logic when this pv feature is not exposed to guest, however, kvm_steal_time.preempted not only leveraged by pv tlb shootdown logic but also mitigate the lock holder preemption issue. From guest's point of view, vCPU is always preempted since we lose the reset of kvm_steal_time.preempted before vmentry if pv tlb shootdown feature is not exposed. This patch fixes it by clearing kvm_steal_time.preempted before vmentry. Fixes: 66570e96 (kvm: x86: only provide PV features if enabled in guest's CPUID) Reviewed-by:
-
Wanpeng Li authored
In case of under-committed scenarios, vCPUs can be scheduled easily; kvm_vcpu_yield_to adds extra overhead, and it is also common to see when vcpu->ready is true but yield later failing due to p->state is TASK_RUNNING. Let's bail out in such scenarios by checking the length of current cpu runqueue, which can be treated as a hint of under-committed instead of guarantee of accuracy. 30%+ of directed-yield attempts can now avoid the expensive lookups in kvm_sched_yield() in an under-committed scenario. Signed-off-by:
-
Wanpeng Li authored
This is inspired by commit 262de410 (kvm: exit halt polling on need_resched() as well). Due to PPC implements an arch specific halt polling logic, we have to the need_resched() check there as well. This patch adds a helper function that can be shared between book3s and generic halt-polling loops. Reviewed-by:
-
- 24 May, 2021 3 commits
-
-
Paolo Bonzini authored
Make it consistent with kvm_intel.enable_apicv. Suggested-by:
-
Vitaly Kuznetsov authored
CONFIG_X86_LOCAL_APIC is always on when CONFIG_KVM (on x86) since commit e42eef4b ("KVM: add X86_LOCAL_APIC dependency"). Suggested-by:
-
Vitaly Kuznetsov authored
AVIC dependency on CONFIG_X86_LOCAL_APIC is dead code since commit e42eef4b ("KVM: add X86_LOCAL_APIC dependency"). Suggested-by:
-
- 17 May, 2021 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.13, take #1 - Fix regression with irqbypass not restarting the guest on failed connect - Fix regression with debug register decoding resulting in overlapping access - Commit exception state on exit to usrspace - Fix the MMU notifier return values - Add missing 'static' qualifiers in the new host stage-2 code
-
- 15 May, 2021 7 commits
-
-
Marc Zyngier authored
Commit 03fdfb26 ("KVM: arm64: Don't write junk to sysregs on reset") flipped the register number to 0 for all the debug registers in the sysreg table, hereby indicating that these registers live in a separate shadow structure. However, the author of this patch failed to realise that all the accessors are using that particular index instead of the register encoding, resulting in all the registers hitting index 0. Not quite a valid implementation of the architecture... Address the issue by fixing all the accessors to use the CRm field of the encoding, which contains the debug register index. Fixes: 03fdfb26 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by:
Ricardo Koller <ricarkol@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org
-
Marc Zyngier authored
KVM currently updates PC (and the corresponding exception state) using a two phase approach: first by setting a set of flags, then by converting these flags into a state update when the vcpu is about to enter the guest. However, this creates a disconnect with userspace if the vcpu thread returns there with any exception/PC flag set. In this case, the exposed context is wrong, as userspace doesn't have access to these flags (they aren't architectural). It also means that these flags are preserved across a reset, which isn't expected. To solve this problem, force an explicit synchronisation of the exception state on vcpu exit to userspace. As an optimisation for nVHE systems, only perform this when there is something pending. Reported-by:
Zenghui Yu <yuzenghui@huawei.com> Reviewed-by:
Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by:
-
Marc Zyngier authored
In order to make it easy to call __adjust_pc() from the EL1 code (in the case of nVHE), rename it to __kvm_adjust_pc() and move it out of line. No expected functional change. Reviewed-by:
-
Quentin Perret authored
The host stage-2 memory pools are not used outside of mem_protect.c, mark them static. Fixes: 1025c8c0 ("KVM: arm64: Wrap the host with a stage 2") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Quentin Perret <qperret@google.com> Signed-off-by:
-
Quentin Perret authored
It is not used outside of setup.c, mark it static. Fixes:f320bc74 ("KVM: arm64: Prepare the creation of s1 mappings at EL2") Reported-by:
-
kernel test robot authored
arch/arm64/kvm/mmu.c:1114:9-10: WARNING: return of 0/1 in function 'kvm_age_gfn' with return type bool arch/arm64/kvm/mmu.c:1084:9-10: WARNING: return of 0/1 in function 'kvm_set_spte_gfn' with return type bool arch/arm64/kvm/mmu.c:1127:9-10: WARNING: return of 0/1 in function 'kvm_test_age_gfn' with return type bool arch/arm64/kvm/mmu.c:1070:9-10: WARNING: return of 0/1 in function 'kvm_unmap_gfn_range' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Fixes: cd4c7183 ("KVM: arm64: Convert to the gfn-based MMU notifier callbacks") Reported-by:
-
Zhu Lingshan authored
This reverts commit a979a6aa. The reverted commit may cause VM freeze on arm64 with GICv4, where stopping a consumer is implemented by suspending the VM. Should the connect fail, the VM will not be resumed, which is a bit of a problem. It also erroneously calls the producer destructor unconditionally, which is unexpected. Reported-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Suggested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Tested-by:
Zhu Lingshan <lingshan.zhu@intel.com> [maz: tags and cc-stable, commit message update] Signed-off-by:
-
- 09 May, 2021 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Bit later than usual, I queued them all up on Friday then promptly forgot to write the pull request email. This is mainly amdgpu fixes, with some radeon/msm/fbdev and one i915 gvt fix thrown in. amdgpu: - MPO hang workaround - Fix for concurrent VM flushes on vega/navi - dcefclk is not adjustable on navi1x and newer - MST HPD debugfs fix - Suspend/resumes fixes - Register VGA clients late in case driver fails to load - Fix GEM leak in user framebuffer create - Add support for polaris12 with 32 bit memory interface - Fix duplicate cursor issue when using overlay - Fix corruption with tiled surfaces on VCN3 - Add BO size and stride check to fix BO size verification radeon: - Fix off-by-one in power state parsing - Fix possible memory leak in power state parsing msm: - NULL ptr dereference fix fbdev: - procfs disabled warning fix i915: - gvt: Fix a possible division by zero in vgpu display rate calculation" * tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: Use device specific BO size & stride check. drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode. drm/amd/pm: initialize variable drm/radeon: Avoid power table parsing memory leaks drm/radeon: Fix off-by-one power_state index heap overwrite drm/amd/display: Fix two cursor duplication when using overlay drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC fbmem: Mark proc_fb_seq_ops as __maybe_unused drm/msm/dpu: Delete bonkers code drm/i915/gvt: Prevent divided by zero when calculating refresh rate amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create drm/amdgpu: Register VGA clients after init can no longer fail drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown drm/amdgpu: fix r initial values drm/amd/display: fix wrong statement in mst hpd debugfs amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2 drm/amd/display: Reject non-zero src_y and src_x for video planes -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Turns out the bio max size change still has issues, so let's get it reverted for 5.13-rc1. We'll shake out the issues there and defer it to 5.14 instead" * tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block: Revert "bio: limit bio max size"
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Three small SMB3 chmultichannel related changesets (also for stable) from the SMB3 test event this week. The other fixes are still in review/testing" * tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6: smb3: if max_channels set to more than one channel request multichannel smb3: do not attempt multichannel to server which does not support it smb3: when mounting with multichannel include it in requested capabilities
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent PSI state corruption when schedule() races with cgroup move. A recent commit combined two PSI callbacks to reduce the number of cgroup tree updates, but missed that schedule() can drop rq::lock for load balancing, which opens the race window for cgroup_move_task() which then observes half updated state. The fix is to solely use task::ps_flags instead of looking at the potentially mismatching scheduler state - Prevent an out-of-bounds access in uclamp caused bu a rounding division which can lead to an off-by-one error exceeding the buckets array size. - Prevent unfairness caused by missing load decay when a task is attached to a cfs runqueue. The old load of the task was attached to the runqueue and never removed. Fix it by enforcing the load update through the hierarchy for unthrottled run queue instances. - A documentation fix fot the 'sched_verbose' command line option" * tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix unfairness caused by missing load decay sched: Fix out-of-bound access in uclamp psi: Fix psi state corruption when schedule() races with cgroup move sched,doc: sched_debug_verbose cmdline should be sched_verbose
-
