- 26 Jun, 2019 11 commits
-
-
Martin Blumenstingl authored
Replace the loop to calculate the pre-divider and count with two separate div64_u64() calculations. This makes the code easier to read and improves the precision. Three example cases: 1) 32.768kHz LPO clock for the SDIO wifi chip on Khadas VIM clock input: 500MHz (FCLK_DIV4) period: 30518ns duty cycle: 15259ns old algorithm: pre_div=0, cnt=15259 new algorithm: pre_div=0, cnt=15259 (no difference in calculated values) 2) PWM LED on Khadas VIM clock input: 24MHz (XTAL) period: 7812500ns duty cycle: 7812500ns old algorithm: pre_div=2, cnt=62004 new algorithm: pre_div=2, cnt=62500 Using a scope (24MHz sampling rate) shows the actual difference: - old: 7753000ns, off by -59500ns (0.7616%) - new: 7815000ns, off by +2500ns (0.032%) 3) Theoretical case where pre_div is different clock input: 24MHz (XTAL) period: 2730624ns duty cycle: 1365312ns old algorithm: pre_div=1, cnt=32768 new algorithm: pre_div=0, cnt=65534 Using a scope (24MHz sampling rate) shows the actual difference: - old: 2731000ns - new: 2731000ns (my scope is not precise enough to measure the difference if there's any) Suggested-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com>
-
Martin Blumenstingl authored
All existing PWM drivers (except pwm-meson and two other ones) call pwm_set_chip_data() from their pwm_ops.request() callback. Now that we can access the struct meson_pwm_channel from struct meson_pwm we can do the same. Move the call to pwm_set_chip_data() to meson_pwm_request() and drop the custom meson_pwm_add_channels(). This makes the implementation consistent with other drivers and makes it slightly more obvious thatpwm_get_chip_data() cannot be used from pwm_ops.get_state() (because that's called by the PWM core before pwm_ops.request()). No functional changes intended. Reviewed-by:
-
Martin Blumenstingl authored
Introduce struct meson_pwm_channel_data which contains the per-channel offsets for the PWM register and REG_MISC_AB bits. Replace the existing switch (pwm->hwpwm) statements with an access to the new struct. This simplifies the code and will make it easier to implement pwm_ops.get_state() because the switch-case which all per-channel registers and offsets (as previously implemented in meson_pwm_enable()) doesn't have to be duplicated. No functional changes intended. Reviewed-by:
-
Martin Blumenstingl authored
Make struct meson_pwm_channel accessible from struct meson_pwm. PWM core has a limitation: per-channel data can only be set after pwmchip_add() is called. However, pwmchip_add() internally calls pwm_ops.get_state(). If pwm_ops.get_state() needs access to the per-channel data it has to obtain it from struct pwm_chip and struct pwm_device's hwpwm information. Add a struct meson_pwm_channel for each PWM channel to struct meson_pwm so the pwm_ops.get_state() callback can be implemented as it needs access to the clock from struct meson_pwm_channel. Reviewed-by:
-
Martin Blumenstingl authored
meson_pwm_calc() is the last function that accepts a struct meson_pwm_channel. meson_pwm_enable(), meson_pwm_disable() and meson_pwm_apply() for example are all taking a struct pwm_device as parameter. When they need the struct meson_pwm_channel these functions simply call pwm_get_chip_data() internally. Make meson_pwm_calc() consistent with the other functions in the meson-pwm driver by passing struct pwm_device to it as well. The value of the "id" parameter is actually pwm->hwpwm, but the driver never read the "id" parameter, which is why there's no replacement for it in the new code. No functional changes. Reviewed-by:
-
Martin Blumenstingl authored
Let meson_pwm_calc() use the polarity from struct pwm_state directly. This removes a level of indirection where meson_pwm_apply() first had to set a driver-internal inverter mask which was then only used by meson_pwm_calc(). Instead of adding the polarity as parameter to meson_pwm_calc() switch to struct pwm_state directly to make it easier to see where the parameters are actually coming from. Reviewed-by:
-
Martin Blumenstingl authored
MISC_CLK_SEL_WIDTH is only used in one place where it's converted into a bit-mask. Rename and change the macro to be a bit-mask so that conversion is not needed anymore. No functional changes intended. Reviewed-by:
-
Martin Blumenstingl authored
meson_pwm_calc() ensures that "lo" is always less than 16 bits wide (otherwise it would overflow into the "hi" part of the REG_PWM_{A,B} register). Use GENMASK and FIELD_PREP for the lo and hi values to make it easier to spot how wide these are internally. Additionally this is a preparation step for the .get_state() implementation where the GENMASK() for lo and hi becomes handy because it can be used with FIELD_GET() to extract the values from the register REG_PWM_{A,B} register. No functional changes intended. Reviewed-by: -
Martin Blumenstingl authored
Simplify the code which fetches the input clock for a PWM channel by using devm_clk_get_optional(). This comes with a small functional change: previously all errors except EPROBE_DEFER were ignored. Now all other errors are also treated as errors. If no input clock is present devm_clk_get_optional() will return NULL instead of an error which matches the behavior of the old code. Reviewed-by:
-
Martin Blumenstingl authored
This is a preparation for a future cleanup. Pass struct pwm_device instead of passing the individual values required by each function as these can be obtained for each struct pwm_device instance. As a nice side-effect the driver now uses "switch (pwm->hwpwm)" everywhere. Before some functions used "switch (id)" while others used "switch (pwm->hwpwm)". No functional changes. Reviewed-by:
-
Paul Cercueil authored
When the PWM mode of TCU2 channels is disabled, their corresponding pin does not always return to its initial level. Force this by using a small trick: we set duty > period, which is an invalid configuration for the hardware, which then correctly resets the pin to the initial level. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
-
- 25 Jun, 2019 12 commits
-
-
Paul Cercueil authored
This is cleaner, more future-proof, and incidentally it also fixes the PWM resetting its config when stopped/started several times. Signed-off-by:
-
Paul Cercueil authored
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by:
-
Paul Cercueil authored
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A and G12B Documentation is wrong, the AO xtal and clk81 clock source order is reversed, and validated when adding DVFS support by using the PWM AO D output to control the CPU supply voltage. The vendor tree also uses the reversed xtal and clk81 order at [1]. [1] https://github.com/hardkernel/linux/blob/odroidn2-4.9.y/drivers/amlogic/pwm/pwm_meson.c#L462 Fixes: f41efceb ("pwm: meson: Add clock source configuration for Meson G12A") Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Signed-off-by:
-
Fabrice Gasnier authored
STM32 Timers support generic 3 cells PWM to encode PWM number, period and polarity. Fixes: 7edf7369 ("pwm: Add driver for STM32 plaftorm") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by:
-
Fabrice Gasnier authored
STM32 Timers support generic 3 cells PWM bindings to encode PWM number, period and polarity as defined in pwm.txt. Fixes: cd9a99c2 ("dt-bindings: pwm: Add STM32 bindings") Signed-off-by:
-
Fabrice Gasnier authored
Add a device link between the PWM consumer and the PWM provider. This enforces the PWM user to get suspended before the PWM provider. It allows proper synchronization of suspend/resume sequences: the PWM user is responsible for properly stopping PWM, before the provider gets suspended: see [1]. Add the device link in: - of_pwm_get() - pwm_get() - devm_*pwm_get() variants as it requires a reference to the device for the PWM consumer. [1] https://lkml.org/lkml/2019/2/5/770Suggested-by:
-
Fabrice Gasnier authored
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence. Only perform a check here, and handle the pinctrl states. See [1]. [1] https://lkml.org/lkml/2019/2/5/770Signed-off-by:
-
Fabrice Gasnier authored
Add documentation for pin control sleep state on STM32 LPTimer PWM. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Yash Shah authored
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC. Signed-off-by:
Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Yash Shah <yash.shah@sifive.com> Reviewed-by:
-
Yash Shah authored
DT documentation for PWM controller added. Signed-off-by:
-
- 19 May, 2019 17 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifsLinus Torvalds authored
Pull UBIFS fixes from Richard Weinberger: - build errors wrt xattrs - mismerge which lead to a wrong Kconfig ifdef - missing endianness conversion * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Convert xattr inum to host order ubifs: Use correct config name for encryption ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
-
Linus Torvalds authored
Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "Some I2C core API additions which are kind of simple but enhance error checking for users a lot, especially by returning errno now. There are wrappers to still support the old API but it will be removed once all users are converted" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: add device-managed version of i2c_new_dummy i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Some bug fixes, and an update to the URL's for the final version of Unicode 12.1.0" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid panic during forced reboot due to aborted journal ext4: fix block validity checks for journal inodes using indirect blocks unicode: update to Unicode 12.1.0 final unicode: add missing check for an error return from utf8lookup() ext4: fix miscellaneous sparse warnings ext4: unsigned int compared against zero ext4: fix use-after-free in dx_release() ext4: fix data corruption caused by overlapping unaligned and aligned IO jbd2: fix potential double free ext4: zero out the unused memory region in the extent tree block
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Minor cleanup and fixes, one for stable, four rdma (smbdirect) related. Also adds SEEK_HOLE support" * tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add support for SEEK_DATA and SEEK_HOLE Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file cifs: Allocate memory for all iovs in smb2_ioctl cifs: Don't match port on SMBDirect transport cifs:smbd Use the correct DMA direction when sending data cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called cifs: use the right include for signal_pending() smb3: trivial cleanup to smb2ops.c cifs: cleanup smb2ops.c and normalize strings smb3: display session id in debug data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates from Ingo Molnar: "perf.data: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: - Improve -user-regs/intr-regs suggestions to overcome errors perf annotate: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b) perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. arm64: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: - Add support for recording and printing XMM registers, available, for instance, on Icelake. - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: - Fix instructions sampling rate. - Timestamp fixes. - Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) perf stat: Support 'percore' event qualifier perf stat: Factor out aggregate counts printing perf tools: Add a 'percore' event qualifier perf docs: Add description for stderr perf intel-pt: Fix sample timestamp wrt non-taken branches perf intel-pt: Fix improved sample timestamp perf intel-pt: Fix instructions sampling rate perf regs x86: Add X86 specific arch__intr_reg_mask() perf parse-regs: Add generic support for arch__intr/user_reg_mask() perf parse-regs: Split parse_regs perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events perf vendor events arm64: Remove [[:xdigit:]] wildcard perf jevents: Remove unused variable perf test zstd: Fixup verbose mode output perf tests: Implement Zstd comp/decomp integration test perf inject: Enable COMPRESSED record decompression perf report: Implement perf.data record decompression perf record: Implement -z,--compression_level[=<n>] option perf report: Add stub processing of compressed events for -D ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Ingo Molnar: "Fix an EFI-fb regression that affects certain x86 systems" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core fixes from Ingo Molnar: "This fixes a particularly thorny munmap() bug with MPX, plus fixes a host build environment assumption in objtool" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Allow AR to be overridden with HOSTAR x86/mpx, mm/core: Fix recursive munmap() corruption
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix going back to stable, for a bug on 32-bit introduced when we added support for THREAD_INFO_IN_TASK. A fix for a typo in a recent rework of our hugetlb code that leads to crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE. Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both only triggered when userspace tries to access addresses outside the user or kernel address ranges. Finally a fix for a recently introduced double free in an error path in our cacheinfo code. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding" * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/cacheinfo: Remove double free powerpc/mm/hash: Fix get_region_id() for invalid addresses powerpc/mm: Drop VM_BUG_ON in get_region_id() powerpc/mm: Fix crashes with hugepages & 4K pages powerpc/32s: fix flush_hash_pages() on SMP
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull a few more MIPS updates from Paul Burton: "Some SGI IP27 specific PCI rework and a batch of fixes: - A build fix for BMIPS5000 configurations with CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery. - A fix to report supported ISAs correctly on older Ingenic SoCs which incorrectly indicate MIPSr2 support in their cop0 Config register. - Some PCI modernization for SGI IP27 systems as part of ongoing work to support some other SGI systems. - A fix allowing use of appended DTB files with generic kernels. - DMA mask fixes for SGI IP22 & Alchemy systems" * tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: add DMA masks for on-chip ethernet MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask generic: fix appended dtb support MIPS: SGI-IP27: abstract chipset irq from bridge MIPS: SGI-IP27: use generic PCI driver MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled -
Linus Torvalds authored
Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains an assortment of RISC-V related patches that I'd like to target for the 5.2 merge window. Most of the patches are cleanups, but there are a handful of user-visible changes: - The nosmp and nr_cpus command-line arguments are now supported, which work like normal. - The SBI console no longer installs itself as a preferred console, we rely on standard mechanisms (/chosen, command-line, hueristics) instead. - sfence_remove_sfence_vma{,_asid} now pass their arguments along to the SBI call. - Modules now support BUG(). - A missing sfence.vma during boot has been added. This bug only manifests during boot. - The arch/riscv support for SiFive's L2 cache controller has been merged, which should un-block the EDAC framework work. I've only tested this on QEMU again, as I didn't have time to get things running on the Unleashed. The latest master from this morning merges in cleanly and passes the tests as well" * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) riscv: fix locking violation in page fault handler RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs RISC-V: Add DT documentation for SiFive L2 Cache Controller RISC-V: Avoid using invalid intermediate translations riscv: Support BUG() in kernel module riscv: Add the support for c.ebreak check in is_valid_bugaddr() riscv: support trap-based WARN() riscv: fix sbi_remote_sfence_vma{,_asid}. riscv: move switch_mm to its own file riscv: move flush_icache_{all,mm} to cacheflush.c tty: Don't force RISCV SBI console as preferred console RISC-V: Access CSRs using CSR numbers RISC-V: Add interrupt related SCAUSE defines in asm/csr.h RISC-V: Use tabs to align macro values in asm/csr.h RISC-V: Fix minor checkpatch issues. RISC-V: Support nr_cpus command line option. RISC-V: Implement nosmp commandline option. RISC-V: Add RISC-V specific arch_match_cpu_phys_id riscv: vdso: drop unnecessary cc-ldoption riscv: call pm_power_off from machine_halt / machine_power_off ...
-
Masahiro Yamada authored
'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81 or later, which is the requirement for building the kernel since commit 37d69ee3 ("docs: bump minimal GNU Make version to 3.81"). Use it to improve the readability. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
