- 31 Jan, 2019 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
- Track all runtime-PM wakerefs and other rpm improvements (Chris) - Fix ILK-IVB primary plane enable delays (Juha-Pekka) - Differentiate between gtt->mutex and ppgtt->mutex (Chris) - Prevent concurrent GGTT update and use on Braswell (Chris) - Fix CNL macros for DDI vswing (Aditya) - Fix static code analysis warning (RK) - Only dump GPU state on set-wedged if interesting (Chris) - Port F detection improvements (Imre) - userptr mutex lock fixes (Chris) - Fix on MST allocation by propagating error value at compute_config (Lyude) - Serialise concurrent calls to set_wedge (Chris) - Unify reset functionality into i915_reset.c (Chris) - Switch to kernel fixed size types (Jani) - Limit the for_each_set_bit to the valid range (Chris) - Fix wakeref cooie handling (Tvrtko) - IRQs handling improvements (Chris) - Selftests improvements (Chris) - Remove superfluous PANEL_POWER_OFF macro (Jani) - Global seqno fix (Chris) - DSI fixes (Hans) - Refactor out intel_context_init() (Chris) - Show all active engines on hangcheck (Chris) - PSR2 fixes and improvements (Jose) - Do a posting read after irq install on Ice Lake (Daniele) - Add few more device IDs for Ice Lake (Rodrigo) - Mark up priority boost on preemption (Chris) - Add color management LUT validation helper (Matt) - Split out intel_crt_present to platform specific setup (Jani) - LVDS and TV clean up and improvements (Jani) - Simplify CRT VBT check for per-VLV/DDI (Jani) - De-inline intel_context_init() (Chris) - Backlight fixes (Maarten) - Enable fastset for non-boot modesets (Maarten) - Make HW readout mark CRTC scaler as in use (Maarten) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128181000.GA5284@intel.com
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
New stuff for 5.1. amdgpu: - DC bandwidth formula updates - Support for DCC on scanout surfaces - Support for multiple IH rings on soc15 asics - Fix xgmi locking - Add sysfs interface to get pcie usage stats - Simplify DC i2c/aux code - Initial support for BACO on vega10/20 - New runtime SMU feature debug interface - Expand existing sysfs power interfaces to new clock domains - Handle kexec properly - Simplify IH programming - Rework doorbell handling across asics - Drop old CI DPM implementation - DC page flipping fixes - Misc SR-IOV fixes amdkfd: - Simplify the interfaces between amdkfd and amdgpu ttm: - Add a callback to notify the driver when the lru changes sched: - Refactor mirror list handling - Rework hw fence processing Signed-off-by:
-
- 25 Jan, 2019 38 commits
-
-
ndesaulniers@google.com authored
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn on SSE2 to support emitting double precision floating point instructions rather than calls to non-existent (usually available from gcc_s or compiler_rt) floating point helper routines. Link: https://gcc.gnu.org/onlinedocs/gccint/Soft-float-library-routines.html Link: https://github.com/ClangBuiltLinux/linux/issues/327 Cc: stable@vger.kernel.org # 4.19 Reported-by:
S, Shirish <Shirish.S@amd.com> Reported-by:
Matthias Kaehlcke <mka@google.com> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Matthias Kaehlcke <mka@chromium.org> Tested-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Evan Quan authored
Enable retrieving and setting ppfeatures on Vega12. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega12. Signed-off-by:
-
Evan Quan authored
Enable retrieving and setting ppfeatures on Vega10. Signed-off-by:
-
Evan Quan authored
Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega10. Signed-off-by:
-
Evan Quan authored
That's unnecessary. Also it makes more sense to show all the clocks on one metrics table export. Signed-off-by:
-
Evan Quan authored
Current implementation cannot report the correct gfxclk under DS. Signed-off-by:
-
hersen wu authored
[Why] After call bios table crtc_source_select, dal will program fmt again. The bios table program dig_source_select and other fmt register for bios usage which is redundancy and uncessary. [How] Program dig_soruce_select register directly Signed-off-by:
hersen wu <hersenxs.wu@amd.com> Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Steven Chiu authored
Signed-off-by:
Steven Chiu <steven.chiu@amd.com> Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Eric Yang authored
[why] Previously we incorrectly skipped backlight control when stream is present but dpms_off = true. This causes backlight to remain on in the we boot up or resume into a external display only configuration where VBIOS posted on the eDP. [How] Add dpms_off into the condition for edp need to turn off. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
-
Eric Yang authored
[Why] This change causes regression for S4 resume where gamma is not programmed. The change incorrectly updates the requested dpms_off state. This reverts commit d2b1d6bb. Signed-off-by:
-
Josip Pavic authored
[Why] Improved contrast in ABM 2.2 is desired [How] Increase the contrast factor for ABM levels 2, 3 and 4 Signed-off-by:
Josip Pavic <Josip.Pavic@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Krunoslav Kovac authored
[Why] Our output TF calculation doesn't work if no user-specified gamma correction. Normally, user provides this, but driver sohuld just assume default (linear) gamma otherwise. [How] Remove output TF dependency on user gamma being provided. Signed-off-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Reviewed-by:
Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by:
-
John Barberiz authored
[Why] An uninitialized variable would randomly initialize to a large value. This caused enough delay to fail DP Compliance Test 400.2.1. [How] Initialize the variable. Signed-off-by:
John Barberiz <John.Barberiz@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Josip Pavic authored
[Why] Need method of detecting which version of the DMCU FW is loaded and load the appropriate iRAM. [How] Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM. Signed-off-by:
-
Josip Pavic authored
[Why] Current date based versioning doesn't tell us about feature version and build version, and is not useful for debug. [How] Add versioning based on feature and build Signed-off-by:
-
David Francis authored
[Why] We were assuming that any commit with allow_modeset == false was a pageflip. This was against drm intention and only worked by sheer luck [How] A pageflip is the change from one framebuffer to another Signed-off-by:
David Francis <David.Francis@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
David Francis authored
[Why] Our old logic: if pageflip, update freesync and plane address. Otherwise, update everything. This over-updated on non-pageflip cases, and it failed to update if pageflip and non-pageflip changes occurred on the same commit [How] Update flip_addrs on pageflips. Update scaling_info when it changes. Update color fields on color changes. Updates plane_info always because we don't have a good way of knowing when it needs to be updated. Unfortunately, this means that every stream commit involves two calls into DC. In particular, on pageflips there is a second, pointless update that changes nothing but costs several microseconds (about a 50% increase in time taken). The update is fast, but there are comparisons and some useless programming. Leave TODOs indicating dissatisfaction. Signed-off-by:
-
David Francis authored
[Why] amdgpu_dm_commit_planes was performing multi-plane flips incorrectly: It waited for vblank once per flipped plane It prepared flip ISR and acquired the corresponding vblank ref once per plane, although it closed ISR and put the ref once per crtc It called into dc once per flipped plane, duplicating some work [How] Wait for vblank, get vblank ref, prepare flip ISR, and call into DC only once, and only if there is a pageflip Make freesync continue to update planes even if vrr information has already been changed Signed-off-by:
-
David Francis authored
[Why] Underscan and ABM are connector properties but require updates to DC stream state. Previously, on updates to these properties the affected stream and all its planes were committed. This is unnecessary; only a few fields on the stream need to be changed. [How] If scaling or ABM have changed, change the stream and create a stream update with those changes. Call DC with only those fields. Signed-off-by:
-
David Francis authored
[Why] DC was assuming that any surface_update->scaling_info meant the update was at least medium. However, if nothing has changed there is no scaling to program, so there is no problem with the update being fast [How] If every update flag is not set, the update is fast Signed-off-by:
-
Eryk Brol authored
Virtual memory allows display to support flipping to surfaces which are not allocated contiguously in memory with physical addresses, instead a 1-4 level page table is used. This is beneficial because it allows the scattering of large surfaces to improve memory efficiency and security. Signed-off-by:
Eryk Brol <eryk.brol@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Eryk Brol authored
[Why] Change DCN10 hubbub to use hubbub as a base and allow all future DCN hubbubs to do the same instead of using DCN10_hubbub. This increases readability and doesn't require future hubbubs to inherit anything other than the base hubbub struct. [How] Create separate DCN10_hubbub struct which uses the hubbub struct as a base. Signed-off-by:
-
hersen wu authored
[Why] For fastboot, Bios will light up eDP before SW driver is loaded. SW driver will check if eDP is lit by bios through reading the BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP power and phy to save time. Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This causes eDP fast boot to not work property. For some eDP panels, even if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not handle properly. This may cause a short flash on screen. [How] Add definition of BIOS_SCRATCH_3 for all asic Signed-off-by:
-
Andrey Grodzovsky authored
Expedite job deletion from ring mirror list to the HW fence signal callback instead from finish_work, together with waiting for all such fences to signal in drm_sched_stop we garantee that already signaled job will not be processed twice. Remove the sched finish fence callback and just submit finish_work directly from the HW fence callback. v2: Fix comments. v3: Attach hw fence cb to sched_job v5: Rebase Suggested-by:
Christian Koenig <Christian.Koenig@amd.com> Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Andrey Grodzovsky authored
Decauple sched threads stop and start and ring mirror list handling from the policy of what to do about the guilty jobs. When stoppping the sched thread and detaching sched fences from non signaled HW fenes wait for all signaled HW fences to complete before rerunning the jobs. v2: Fix resubmission of guilty job into HW after refactoring. v4: Full restart for all the jobs, not only from guilty ring. Extract karma increase into standalone function. v5: Rework waiting for signaled jobs without relying on the job struct itself as those might already be freed for non 'guilty' job's schedulers. Expose karma increase to drivers. v6: Use list_for_each_entry_safe_continue and drm_sched_process_job in case fence already signaled. Call drm_sched_increase_karma only once for amdgpu and add documentation. v7: Wait only for the latest job's fence. Suggested-by:
-
Evan Quan authored
For those SKUs which support this feature only. Signed-off-by:
-
Evan Quan authored
MGPU fan boost related parameter is added. Signed-off-by:
-
Alex Deucher authored
The power smu7 powerplay code is much more robust and has been the default for a while now. Remove the old code. Acked-by:
-
Alex Deucher authored
Check if the device is root rather before attempting to see what speeds the pcie port supports. Fixes a crash with pci passthrough in a VM. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366Reviewed-by:
-
Alex Deucher authored
Add missing power_average to visible check for power attributes for APUs. Was missed before. Reviewed-by:
-
Evan Quan authored
As the gfxclk for SMU11 can have at most 16 discrete levels. Signed-off-by:
-
Evan Quan authored
BTC is needed before enabling all SMU features. Signed-off-by:
-
Evan Quan authored
The SOC clock needs also to fit the new performance level. Signed-off-by:
-
Evan Quan authored
No display related settings are needed on dpm level change. Signed-off-by:
-
Evan Quan authored
No dpm level setting is needed when the request level is actually same as current. Signed-off-by:
-
Jack Xiao authored
Replace the last bool type parameter with a general flags parameter, to make the last parameter be able to contain more information. v2: drop setting need_ctx_switch = false Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Jack Xiao <Jack.Xiao@amd.com> Signed-off-by:
-
Kenneth Feng authored
gfxclk for OD setting is limited to 1980M for non-acg ASICs of Vega10 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
