The NFS/RDMA port assignment is specified in Section 9 of RFC 8267.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_rqst.a_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_rqst.a_count it might make a difference
in following places:
 - nlmclnt_release_call() and nlmsvc_release_call(): decrement
   in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_lockowner.count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_lockowner.count it might make a difference
in following places:
 - nlm_put_lockowner(): decrement in refcount_dec_and_lock() only
   provides RELEASE ordering, control dependency on success and
   holds a spin lock on success vs. fully ordered atomic counterpart.
   No changes in spin lock guarantees.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nsm_handle.sm_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nsm_handle.sm_count it might make a difference
in following places:
 - nsm_release(): decrement in refcount_dec_and_lock() only
   provides RELEASE ordering, control dependency on success
   and holds a spin lock on success vs. fully ordered atomic
   counterpart. No change for the spin lock guarantees.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

atomic_t variables are currently used to implement reference
counters with the following properties:
 - counter is initialized to 1 using atomic_set()
 - a resource is freed upon counter reaching zero
 - once counter reaches zero, its further
   increments aren't allowed
 - counter schema uses basic atomic operations
   (set, inc, inc_not_zero, dec_and_test, etc.)

Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.

The variable nlm_host.h_count  is used as pure reference counter.
Convert it to refcount_t and fix up the operations.

**Important note for maintainers:

Some functions from refcount_t API defined in lib/refcount.c
have different memory ordering guarantees than their atomic
counterparts.
The full comparison can be seen in
https://lkml.org/lkml/2017/11/15/57 and it is hopefully soon
in state to be merged to the documentation tree.
Normally the differences should not matter since refcount_t provides
enough guarantees to satisfy the refcounting use cases, but in
some rare cases it might matter.
Please double check that you don't have some undocumented
memory guarantees for this variable usage.

For the nlm_host.h_count it might make a difference
in following places:
 - nlmsvc_release_host(): decrement in refcount_dec()
   provides RELEASE ordering, while original atomic_dec()
   was fully unordered. Since the change is for better, it
   should not matter.
 - nlmclnt_release_host(): decrement in refcount_dec_and_test() only
   provides RELEASE ordering and control dependency on success
   vs. fully ordered atomic counterpart. It doesn't seem to
   matter in this case since object freeing happens under mutex
   lock anyway.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Currently when falling back to doing I/O through the MDS (via
pnfs_{read|write}_through_mds), the client frees the nfs_pgio_header
without releasing the reference taken on the dreq
via pnfs_generic_pg_{read|write}pages -> nfs_pgheader_init ->
nfs_direct_pgio_init.  It then takes another reference on the dreq via
nfs_generic_pg_pgios -> nfs_pgheader_init -> nfs_direct_pgio_init and
as a result the requester will become stuck in inode_dio_wait.  Once
that happens, other processes accessing the inode will become stuck as
well.

Ensure that pnfs_read_through_mds() and pnfs_write_through_mds() clean
up correctly by calling hdr->completion_ops->completion() instead of
calling hdr->release() directly.

This can be reproduced (sometimes) by performing "storage failover
takeover" commands on NetApp filer while doing direct I/O from a client.

This can also be reproduced using SystemTap to simulate a failure while
doing direct I/O from a client (from Dave Wysochanski
<dwysocha@redhat.com>):

stap -v -g -e 'probe module("nfs_layout_nfsv41_files").function("nfs4_fl_prepare_ds").return { $return=NULL; exit(); }'
Suggested-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Fixes: 1ca018d2 ("pNFS: Fix a memory leak when attempted pnfs fails")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

PNFS block/SCSI layouts should gracefully handle cases where block devices
are not available when a layout is retrieved, or the block devices are
removed while the client holds a layout.

While setting up a layout segment, keep a record of an unavailable or
un-parsable block device in cache with a flag so that subsequent layouts do
not spam the server with GETDEVINFO.  We can reuse the current
NFS_DEVICEID_UNAVAILABLE handling with one variation: instead of reusing
the device, we will discard it and send a fresh GETDEVINFO after the
timeout, since the lookup and validation of the device occurs within the
GETDEVINFO response handling.

A lookup of a layout segment that references an unavailable device will
return a segment with the NFS_LSEG_UNAVAILABLE flag set.  This will allow
the pgio layer to mark the layout with the appropriate fail bit, which
forces subsequent IO to the MDS, and prevents spamming the server with
LAYOUTGET, LAYOUTRETURN.

Finally, when IO to a block device fails, look up the block device(s)
referenced by the pgio header, and mark them as unavailable.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If there's an error doing I/O to block device, and the client resends the
I/O to the MDS, the MDS must recall the layout from the client before
processing the I/O.  Let's preempt that exchange by returning the layout
before falling back to the MDS when there's an error.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The blocklayout module contains the client support for both block and SCSI
layouts.  Add a module alias for the SCSI layout type so that the module
will be loaded for SCSI layouts.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs_pgio_rpcsetup() is always called with an offset of 0, so we should be
able to drop the arguement altogether.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

There are 2 comments in the NFSv4 code which suggest that
SIGLOST should possibly be sent to a process.  In these
cases a lock has been lost.
The current practice is to set NFS_LOCK_LOST so that
read/write returns EIO when a lock is lost.
So change these comments to code when sets NFS_LOCK_LOST.

One case is when lock recovery after apparent server restart
fails with NFS4ERR_DENIED, NFS4ERR_RECLAIM_BAD, or
NFS4ERRO_RECLAIM_CONFLICT.  The other case is when a lock
attempt as part of lease recovery fails with NFS4ERR_DENIED.

In an ideal world, these should not happen.  However I have
a packet trace showing an NFSv4.1 session getting
NFS4ERR_BADSESSION after an extended network parition.  The
NFSv4.1 client treats this like server reboot until/unless
it get NFS4ERR_NO_GRACE, in which case it switches over to
"nograce" recovery mode.  In this network trace, the client
attempts to recover a lock and the server (incorrectly)
reports NFS4ERR_DENIED rather than NFS4ERR_NO_GRACE.  This
leads to the ineffective comment and the client then
continues to write using the OPEN stateid.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

This code can never be used as the IS_AUTOMOUNT(inode)
case has already been handled.
So remove it to avoid confusion.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Support the query flags AT_STATX_FORCE_SYNC by forcing an attribute
revalidation, and AT_STATX_DONT_SYNC by returning cached attributes
only.

Use the mask to optimise away server revalidation for attributes
that are not being requested by the user.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The LOOKUPP operation was inserted into the nfs4_procedures array
rather than being appended, which put /proc/net/rpc/nfs out of
whack, and broke the nfsstat utility.
Fix by moving the LOOKUPP operation to the end of the array, and
by ensuring that it keeps the same length whether or not NFSV4.1
and NFSv4.2 are compiled in.

Fixes: 5b5faaf6 ("nfs4: add NFSv4 LOOKUPP handlers")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Convert CLOSE so that it specifies the correct stateid and
inode for the error handling.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Convert CLOSE so that it specifies the correct stateid, state and
inode for the error handling.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The commit list can get very large, and so we need a cond_resched()
in nfs_commit_release_pages() in order to ensure we don't hog the CPU
for excessive periods of time.
Reported-by: Mike Galbraith <efault@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Pull x86 fixlet from Thomas Gleixner.

Remove a warning about lack of compiler support for retpoline that most
people can't do anything about, so it just annoys them needlessly.

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove compile time warning

Pull powerpc fixes from Michael Ellerman:
 "One fix for an oops at boot if we take a hotplug interrupt before we
  are ready to handle it.

  The bulk is patches to implement mitigation for Meltdown, see the
  change logs for more details.

  Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
  Masters, Jose Ricardo Ziviani, David Gibson"

* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Check device-tree for RFI flush settings
  powerpc/pseries: Query hypervisor for RFI flush settings
  powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
  powerpc/64s: Add support for RFI flush of L1-D cache
  powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
  powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
  powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
  powerpc/64s: Simple RFI macro conversions
  powerpc/64: Add macros for annotating the destination of rfid/hrfid
  powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
  powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ

Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler
does not have retpoline support. Linus rationale for this is:

  It's wrong because it will just make people turn off RETPOLINE, and the
  asm updates - and return stack clearing - that are independent of the
  compiler are likely the most important parts because they are likely the
  ones easiest to target.

  And it's annoying because most people won't be able to do anything about
  it. The number of people building their own compiler? Very small. So if
  their distro hasn't got a compiler yet (and pretty much nobody does), the
  warning is just annoying crap.

  It is already properly reported as part of the sysfs interface. The
  compile-time warning only encourages bad things.

Fixes: 76b04384 ("x86/retpoline: Add initial retpoline support")
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com

Pull NVMe fix from Jens Axboe:
 "Just a single fix for nvme over fabrics that should go into 4.15"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-fabrics: initialize default host->id in nvmf_host_default()

Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...

The intel_bts driver does not use the 'normal' BTS buffer which is exposed
through the cpu_entry_area but instead uses the memory allocated for the
perf AUX buffer.

This obviously comes apart when using PTI because then the kernel mapping;
which includes that AUX buffer memory; disappears. Fixing this requires to
expose a mapping which is visible in all context and that's not trivial.

As a quick fix disable this driver when PTI is enabled to prevent
malfunction.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greg@kroah.com
Cc: hughd@google.com
Cc: luto@amacapital.net
Cc: Vince Weaver <vince@deater.net>
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net

When the config option for PTI was added a reference to documentation was
added as well. But the documentation did not exist at that point. The final
documentation has a different file name.

Fix it up to point to the proper file.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-security-module@vger.kernel.org
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/3009cc8ccbddcd897ec1e0cb6dda524929de0d14.1515799398.git.wking@tremily.us

The switch to the user space page tables in the low level ASM code sets
unconditionally bit 12 and bit 11 of CR3. Bit 12 is switching the base
address of the page directory to the user part, bit 11 is switching the
PCID to the PCID associated with the user page tables.

This fails on a machine which lacks PCID support because bit 11 is set in
CR3. Bit 11 is reserved when PCID is inactive.

While the Intel SDM claims that the reserved bits are ignored when PCID is
disabled, the AMD APM states that they should be cleared.

This went unnoticed as the AMD APM was not checked when the code was
developed and reviewed and test systems with Intel CPUs never failed to
boot. The report is against a Centos 6 host where the guest fails to boot,
so it's not yet clear whether this is a virt issue or can happen on real
hardware too, but thats irrelevant as the AMD APM clearly ask for clearing
the reserved bits.

Make sure that on non PCID machines bit 11 is not set by the page table
switching code.

Andy suggested to rename the related bits and masks so they are clearly
describing what they should be used for, which is done as well for clarity.

That split could have been done with alternatives but the macro hell is
horrible and ugly. This can be done on top if someone cares to remove the
extra orq. For now it's a straight forward fix.

Fixes: 6fd166aa ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801140009150.2371@nanos

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and device ids for 4.15-rc8

  Nothing major, small fixes for various devices, some resolutions for
  bugs found by fuzzers, and the usual handful of new device ids.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Documentation: usb: fix typo in UVC gadgetfs config command
  usb: misc: usb3503: make sure reset is low for at least 100us
  uas: ignore UAS for Norelsys NS1068(X) chips
  USB: UDC core: fix double-free in usb_add_gadget_udc_release
  USB: fix usbmon BUG trigger
  usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer
  usbip: remove kernel addresses from usb device and urb debug msgs
  usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input
  USB: serial: cp210x: add new device ID ELV ALC 8xxx
  USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ

Pull staging driver fix from Greg KH:
 "Here is a single android ashmem bugfix that resolves a reported issue
  in that interface. It's been in linux-next this week with no reported
  issues"

* tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl

Pull char/misc fixes from Greg KH:
 "Here are two bugfixes for some driver bugs for 4.15-rc8

  The first is a bluetooth security bug that has been ignored by the
  Bluetooth developers for months for no obvious reason at all, so I've
  taken it through my tree.

  The second is a simple double-free bug in the mux subsystem.

  Both have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mux: core: fix double get_device()
  Bluetooth: Prevent stack info leak from the EFS element.

Merge tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix cross-compilation for architectures that setup CROSS_COMPILE in
   their arch Makefile

 - fix Kconfig rational operators for bool / tristate

 - drop a gperf-generated file from .gitignore

* tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  genksyms: drop *.hash.c from .gitignore
  kconfig: fix relational operators for bool and tristate symbols
  kbuild: move cc-option and cc-disable-warning after incl. arch Makefile

Merge tag 'apparmor-pr-2018-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor regression fixes from John Johansen:
 "This fixes a couple bugs I have been working with Matthew Garrett on
  this week. Specifically a regression in the handling of a conflicting
  profile attachment and label match restrictions for ptrace when
  profiles are stacked.

  Summary:

   - fix ptrace label match when matching stacked labels

   - fix regression in profile conflict logic"

* tag 'apparmor-pr-2018-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix regression in profile conflict logic
  apparmor: fix ptrace label match when matching stacked labels

Pull PCI fixes from Bjorn Helgaas:
 "Fix AMD boot regression due to 64-bit window conflicting with system
  memory (Christian König)"

* tag 'pci-v4.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: Move and shrink AMD 64-bit window to avoid conflict
  x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows

Merge misc fixlets from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/objtool/Makefile: don't assume sync-check.sh is executable
  kdump: write correct address of mem_section into vmcoreinfo
  kmemleak: allow to coexist with fault injection
  MAINTAINERS, nilfs2: change project home URLs

patch(1) loses the x bit.  So if a user follows our patching
instructions in Documentation/admin-guide/README.rst, their kernel will
not compile.

Fixes: 3bd51c5a ("objtool: Move kernel headers/code sync check to a script")
Reported-by: Nicolas Bock <nicolasbock@gentoo.org>
Reported-by Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Depending on configuration mem_section can now be an array or a pointer
to an array allocated dynamically.  In most cases, we can continue to
refer to it as 'mem_section' regardless of what it is.

But there's one exception: '&mem_section' means "address of the array"
if mem_section is an array, but if mem_section is a pointer, it would
mean "address of the pointer".

We've stepped onto this in kdump code.  VMCOREINFO_SYMBOL(mem_section)
writes down address of pointer into vmcoreinfo, not array as we wanted.

Let's introduce VMCOREINFO_SYMBOL_ARRAY() that would handle the
situation correctly for both cases.

Link: http://lkml.kernel.org/r/20180112162532.35896-1-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 83e3c487 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak does one slab allocation per user allocation.  So if slab fault
injection is enabled to any degree, kmemleak instantly fails to allocate
and turns itself off.  However, it's useful to use kmemleak with fault
injection to find leaks on error paths.  On the other hand, checking
kmemleak itself is not so useful because (1) it's a debugging tool and
(2) it has a very regular allocation pattern (basically a single
allocation site, so it either works or not).

Turn off fault injection for kmemleak allocations.

Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.comSigned-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The domain of NILFS project home was changed to "nilfs.sourceforge.io"
to enable https access (the previous domain "nilfs.sourceforge.net" is
redirected to the new one).  Modify URLs of the project home to reflect
this change and to replace their protocol from http to https.

Link: http://lkml.kernel.org/r/1515416141-5614-1-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a left-over of commit bb3290d9 ("Remove gperf usage from
toolchain").

We do not generate a hash function any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This tests that the vsyscall entries do what they're expected to do.
It also confirms that attempts to read the vsyscall page behave as
expected.

If changes are made to the vsyscall code or its memory map handling,
running this test in all three of vsyscall=none, vsyscall=emulate,
and vsyscall=native are helpful.

(Because it's easy, this also compares the vsyscall results to their
 vDSO equivalents.)

Note to KAISER backporters: please test this under all three
vsyscall modes.  Also, in the emulate and native modes, make sure
that test_vsyscall_64 agrees with the command line or config
option as to which mode you're in.  It's quite easy to mess up
the kernel such that native mode accidentally emulates
or vice versa.

Greg, etc: please backport this to all your Meltdown-patched
kernels.  It'll help make sure the patches didn't regress
vsyscalls.
CSigned-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/2b9c5a174c1d60fd7774461d518aa75598b1d8fd.1515719552.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>