Define the max register address the device supports.
This allows reading the whole register space via
regmap debugfs, without it only register 0x0 is visible.

This was forgotten in the original driver commit.

Fixes: fff7b8ab ("hwmon: add Texas Instruments TPS23861 driver")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hrSigned-off-by: Guenter Roeck <linux@roeck-us.net>

The scpi hwmon shows the sub-zero temperature in an unsigned integer,
which would confuse the users when the machine works in low temperature
environment. This shows the sub-zero temperature in an signed value and
users can get it properly from sensors.
Signed-off-by: Riwen Lu <luriwen@kylinos.cn>
Tested-by: Xin Chen <chenxin@kylinos.cn>
Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cnSigned-off-by: Guenter Roeck <linux@roeck-us.net>

During standby some PSUs turn off the microcontroller. A re-init is
required during resume or the microcontroller stays unresponsive.

Fixes: d115b51e ("hwmon: add Corsair PSU HID controller driver")
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/YLjCJiVtu5zgTabI@monster.powergraphx.localSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Fix typo in example for DT binding, changed from 'comatible'
to 'compatible'.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20210531134655.720462-1-iwamatsu@nigauri.orgSigned-off-by: Guenter Roeck <linux@roeck-us.net>

Pull SCSI fixes from James Bottomley:
 "Five small and fairly minor fixes, all in drivers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_devinfo: Add blacklist entry for HPE OPEN-V
  scsi: ufs: ufs-mediatek: Fix HCI version in some platforms
  scsi: qedf: Do not put host in qedf_vport_create() unconditionally
  scsi: lpfc: Fix failure to transmit ABTS on FC link
  scsi: target: core: Fix warning on realtime kernels

Pull ext4 fixes from Ted Ts'o:
 "Miscellaneous ext4 bug fixes"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Only advertise encrypted_casefold when encryption and unicode are enabled
  ext4: fix no-key deletion for encrypt+casefold
  ext4: fix memory leak in ext4_fill_super
  ext4: fix fast commit alignment issues
  ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed
  ext4: fix accessing uninit percpu counter variable with fast_commit
  ext4: fix memory leak in ext4_mb_init_backend on error path.

Pull ARM SoC fixes from Olof Johansson:
 "A set of fixes that have been coming in over the last few weeks, the
  usual mix of fixes:

   - DT fixups for TI K3

   - SATA drive detection fix for TI DRA7

   - Power management fixes and a few build warning removals for OMAP

   - OP-TEE fix to use standard API for UUID exporting

   - DT fixes for a handful of i.MX boards

  And a few other smaller items"

* tag 'arm-soc-fixes-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: meson: select COMMON_CLK
  soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable
  optee: use export_uuid() to copy client UUID
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  ...

Pull powerpc fixes from Michael Ellerman:
 "Fix our KVM reverse map real-mode handling since we enabled huge
  vmalloc (in some configurations).

  Revert a recent change to our IOMMU code which broke some devices.

  Fix KVM handling of FSCR on P7/P8, which could have possibly let a
  guest crash it's Qemu.

  Fix kprobes validation of prefixed instructions across page boundary.

  Thanks to Alexey Kardashevskiy, Christophe Leroy, Fabiano Rosas,
  Frederic Barrat, Naveen N. Rao, and Nicholas Piggin"

* tag 'powerpc-5.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  Revert "powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs"
  KVM: PPC: Book3S HV: Save host FSCR in the P7/8 path
  powerpc: Fix reverse map real-mode address lookup with huge vmalloc
  powerpc/kprobes: Fix validation of prefixed instructions across page boundary

Pull x86 fixes from Borislav Petkov:
 "A bunch of x86/urgent stuff accumulated for the last two weeks so
  lemme unload it to you.

  It should be all totally risk-free, of course. :-)

   - Fix out-of-spec hardware (1st gen Hygon) which does not implement
     MSR_AMD64_SEV even though the spec clearly states so, and check
     CPUID bits first.

   - Send only one signal to a task when it is a SEGV_PKUERR si_code
     type.

   - Do away with all the wankery of reserving X amount of memory in the
     first megabyte to prevent BIOS corrupting it and simply and
     unconditionally reserve the whole first megabyte.

   - Make alternatives NOP optimization work at an arbitrary position
     within the patched sequence because the compiler can put
     single-byte NOPs for alignment anywhere in the sequence (32-bit
     retpoline), vs our previous assumption that the NOPs are only
     appended.

   - Force-disable ENQCMD[S] instructions support and remove
     update_pasid() because of insufficient protection against FPU state
     modification in an interrupt context, among other xstate horrors
     which are being addressed at the moment. This one limits the
     fallout until proper enablement.

   - Use cpu_feature_enabled() in the idxd driver so that it can be
     build-time disabled through the defines in disabled-features.h.

   - Fix LVT thermal setup for SMI delivery mode by making sure the APIC
     LVT value is read before APIC initialization so that softlockups
     during boot do not happen at least on one machine.

   - Mark all legacy interrupts as legacy vectors when the IO-APIC is
     disabled and when all legacy interrupts are routed through the PIC"

* tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Check SME/SEV support in CPUID first
  x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR
  x86/setup: Always reserve the first 1M of RAM
  x86/alternative: Optimize single-byte NOPs at an arbitrary position
  x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid()
  dmaengine: idxd: Use cpu_feature_enabled()
  x86/thermal: Fix LVT thermal setup for SMI delivery mode
  x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

Encrypted casefolding is only supported when both encryption and
casefolding are both enabled in the config.

Fixes: 471fbbea ("ext4: handle casefolding with encryption")
Cc: stable@vger.kernel.org # 5.13+
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210603094849.314342-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

commit 471fbbea ("ext4: handle casefolding with encryption") is
missing a few checks for the encryption key which are needed to
support deleting enrypted casefolded files when the key is not
present.

This bug made it impossible to delete encrypted+casefolded directories
without the encryption key, due to errors like:

    W         : EXT4-fs warning (device vdc): __ext4fs_dirhash:270: inode #49202: comm Binder:378_4: Siphash requires key

Repro steps in kvm-xfstests test appliance:
      mkfs.ext4 -F -E encoding=utf8 -O encrypt /dev/vdc
      mount /vdc
      mkdir /vdc/dir
      chattr +F /vdc/dir
      keyid=$(head -c 64 /dev/zero | xfs_io -c add_enckey /vdc | awk '{print $NF}')
      xfs_io -c "set_encpolicy $keyid" /vdc/dir
      for i in `seq 1 100`; do
          mkdir /vdc/dir/$i
      done
      xfs_io -c "rm_enckey $keyid" /vdc
      rm -rf /vdc/dir # fails with the bug

Fixes: 471fbbea ("ext4: handle casefolding with encryption")
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20210522004132.2142563-1-drosen@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Buffer head references must be released before calling kill_bdev();
otherwise the buffer head (and its page referenced by b_data) will not
be freed by kill_bdev, and subsequently that bh will be leaked.

If blocksizes differ, sb_set_blocksize() will kill current buffers and
page cache by using kill_bdev(). And then super block will be reread
again but using correct blocksize this time. sb_set_blocksize() didn't
fully free superblock page and buffer head, and being busy, they were
not freed and instead leaked.

This can easily be reproduced by calling an infinite loop of:

  systemctl start <ext4_on_lvm>.mount, and
  systemctl stop <ext4_on_lvm>.mount

... since systemd creates a cgroup for each slice which it mounts, and
the bh leak get amplified by a dying memory cgroup that also never
gets freed, and memory consumption is much more easily noticed.

Fixes: ce40733c ("ext4: Check for return value from sb_set_blocksize")
Fixes: ac27a0ec ("ext4: initial copy of files from ext3")
Link: https://lore.kernel.org/r/20210521075533.95732-1-amakhalov@vmware.comSigned-off-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org

Fast commit recovery data on disk may not be aligned. So, when the
recovery code reads it, this patch makes sure that fast commit info
found on-disk is first memcpy-ed into an aligned variable before
accessing it. As a consequence of it, we also remove some macros that
could resulted in unaligned accesses.

Cc: stable@kernel.org
Fixes: 8016e29f ("ext4: fast commit recovery path")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210519215920.2037527-1-harshads@google.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

We got follow bug_on when run fsstress with injecting IO fault:
[130747.323114] kernel BUG at fs/ext4/extents_status.c:762!
[130747.323117] Internal error: Oops - BUG: 0 [#1] SMP
......
[130747.334329] Call trace:
[130747.334553]  ext4_es_cache_extent+0x150/0x168 [ext4]
[130747.334975]  ext4_cache_extents+0x64/0xe8 [ext4]
[130747.335368]  ext4_find_extent+0x300/0x330 [ext4]
[130747.335759]  ext4_ext_map_blocks+0x74/0x1178 [ext4]
[130747.336179]  ext4_map_blocks+0x2f4/0x5f0 [ext4]
[130747.336567]  ext4_mpage_readpages+0x4a8/0x7a8 [ext4]
[130747.336995]  ext4_readpage+0x54/0x100 [ext4]
[130747.337359]  generic_file_buffered_read+0x410/0xae8
[130747.337767]  generic_file_read_iter+0x114/0x190
[130747.338152]  ext4_file_read_iter+0x5c/0x140 [ext4]
[130747.338556]  __vfs_read+0x11c/0x188
[130747.338851]  vfs_read+0x94/0x150
[130747.339110]  ksys_read+0x74/0xf0

This patch's modification is according to Jan Kara's suggestion in:
https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/
"I see. Now I understand your patch. Honestly, seeing how fragile is trying
to fix extent tree after split has failed in the middle, I would probably
go even further and make sure we fix the tree properly in case of ENOSPC
and EDQUOT (those are easily user triggerable).  Anything else indicates a
HW problem or fs corruption so I'd rather leave the extent tree as is and
don't try to fix it (which also means we will not create overlapping
extents)."

Cc: stable@kernel.org
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210506141042.3298679-1-yebin10@huawei.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull i2c fixes from Wolfram Sang:
 "Some more bugfixes from I2C for v5.13. Usual stuff"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: qcom-geni: Suspend and resume the bus during SYSTEM_SLEEP_PM ops
  i2c: qcom-geni: Add shutdown callback for i2c
  i2c: tegra-bpmp: Demote kernel-doc abuses
  i2c: altera: Fix formatting issue in struct and demote unworthy kernel-doc headers

Merge tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/fixes

Devicetree fixes for TI K3 platforms for v5.13 merge window:

These minor fixes include:
* Fixups for device tree discovered during yaml conversion
* Fixups for missing dma-coherent property in j7200
* Removal of camera sensor node from am65 evm dts to overlay
  as camera sensor boards are variable.

* tag 'ti-k3-dt-fixes-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux:
  arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
  arm64: dts: ti: k3-am65|j721e|am64: Map the dma / navigator subsystem via explicit ranges
  arm64: dts: ti: k3-*: Rename the TI-SCI node
  arm64: dts: ti: k3-am65-wakeup: Drop un-necessary properties from dmsc node
  arm64: dts: ti: k3-am65-wakeup: Add debug region to TI-SCI node
  arm64: dts: ti: k3-*: Rename the TI-SCI clocks node name
  arm64: dts: ti: j7200-main: Mark Main NAVSS as dma-coherent
  arm64: dts: ti: k3-am654-base-board: remove ov5640

Link: https://lore.kernel.org/r/20210518115634.467vgpbzplal5kou@obituarySigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes

OP-TEE use export_uuid() to copy UUID

* tag 'optee-fix-for-v5.13' of git://git.linaro.org/people/jens.wiklander/linux-tee:
  optee: use export_uuid() to copy client UUID

Link: https://lore.kernel.org/r/20210518100712.GA449561@jadeSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

PM and build warning fixes for omaps

While chasing system suspend related regressions, I noticed few other
issues related to PM would be good to have fixed:

- UART idling does not always work for hardware autoidle features
- am335x resume works only the first time unless musb module is loaded

Then there are three patches for omap1 related warnings caused by the gpio
changes, and one build warning fix for legacy mmc platform code when mmc
is built as a loadable module.

These can all be merged whenever suitable naturally. I've sent the more
urgent SATA regression fix separately although it appears in this pull
request too because of the branches merged.

* tag 'omap-for-v5.13/fixes-pm' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: ams-delta: remove unused function ams_delta_camera_power
  bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_act
  bus: ti-sysc: Fix am335x resume hang for usb otg module
  ARM: OMAP2+: Fix build warning when mmc_omap is not built
  ARM: OMAP1: isp1301-omap: Add missing gpiod_add_lookup_table function
  ARM: OMAP1: Fix use of possibly uninitialized irq variable

Link: https://lore.kernel.org/r/pull-1622614772-543196@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Regression fix for TI dra7 SATA not detecting drives

The SATA quirk flags are no missing With recent removal of legacy
platform data and we need to add the quirk flags to detect drives.

* tag 'omap-for-v5.13/fixes-sata' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Fix missing quirk flags for sata

Link: https://lore.kernel.org/r/pull-1622613578-121536@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/fixes

Amlogic fixes for v5.13-rc1
- arm64: meson: select COMMON_CLK to select a proper implementation of the clock API
- soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()

* tag 'amlogic-fixes-v5.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: meson: select COMMON_CLK
  soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()

Link: https://lore.kernel.org/r/73e76706-f3f4-bebf-10dd-d2ec9106a234@baylibre.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.13:

- Fix missing-prototypes warning of 'imx27_pm_init' in i.MX27 platform
  pm code.
- A couple of patches from Fabio Estevam to fix 'tuning-step' property
  in imx7d-meerkat96 and imx7d-pico DT.
- Fix '#gpio-cells' of nxp,pca8574 device in imx6qdl-emcon-avari DT.
- A couple of patches from Lucas Stach to fix regulator and voltage for
  imx8mq-zii-ultra board.
- Add missing regulators for imx6q-dhcom to avoid possible instability
  issues.
- Fix memory-controller settings for fsl-ls1028a DT.
- Fix RGMII clock and voltage for a couple of fsl-ls1028a-kontron-sl28
  boards.
- Fix RGMII connection to QCA8334 switch for imx6dl-yapp4 board.

* tag 'imx-fixes-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
  ARM: dts: imx7d-pico: Fix the 'tuning-step' property
  ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
  arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
  arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
  ARM: imx: pm-imx27: Include "common.h"
  arm64: dts: zii-ultra: fix 12V_MAIN voltage
  arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
  arm64: dts: ls1028a: fix memory node
  ARM: dts: imx6q-dhcom: Add PU,VDD1P1,VDD2P5 regulators
  ARM: dts: imx6dl-yapp4: Fix RGMII connection to QCA8334 switch

Link: https://lore.kernel.org/r/20210527011758.GD8194@dragonSigned-off-by: Olof Johansson <olof@lixom.net>

Merge misc fixes from Andrew Morton:
 "13 patches.

  Subsystems affected by this patch series: mips, mm (kfence, debug,
  pagealloc, memory-hotplug, hugetlb, kasan, and hugetlb), init, proc,
  lib, ocfs2, and mailmap"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mailmap: use private address for Michel Lespinasse
  ocfs2: fix data corruption by fallocate
  lib: crc64: fix kernel-doc warning
  mm, hugetlb: fix simple resv_huge_pages underflow on UFFDIO_COPY
  mm/kasan/init.c: fix doc warning
  proc: add .gitignore for proc-subset-pid selftest
  hugetlb: pass head page to remove_hugetlb_page()
  drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64
  mm/page_alloc: fix counting of free pages after take off from buddy
  mm/debug_vm_pgtable: fix alignment for pmd/pud_advanced_tests()
  pid: take a reference when initializing `cad_pid`
  kfence: use TASK_IDLE when awaiting allocation
  Revert "MIPS: make userspace mapping young by default"

Pull RISC-V fixes from Palmer Dabbelt:

 - Build with '-mno-relax' when using LLVM's linker, which doesn't
   support linker relaxation.

 - A fix to build without SiFive's errata.

 - A fix to use PAs during init_resources()

 - A fix to avoid W+X mappings during boot.

* tag 'riscv-for-linus-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Fix memblock_free() usages in init_resources()
  riscv: skip errata_cip_453.o if CONFIG_ERRATA_SIFIVE_CIP_453 is disabled
  riscv: mm: Fix W+X mappings at boot
  riscv: Use -mno-relax when using lld linker

Link: https://lkml.kernel.org/r/20210602221225.49446-1-michel@lespinasse.orgSigned-off-by: Michel Lespinasse <michel@lespinasse.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When fallocate punches holes out of inode size, if original isize is in
the middle of last cluster, then the part from isize to the end of the
cluster will be zeroed with buffer write, at that time isize is not yet
updated to match the new size, if writeback is kicked in, it will invoke
ocfs2_writepage()->block_write_full_page() where the pages out of inode
size will be dropped.  That will cause file corruption.  Fix this by
zero out eof blocks when extending the inode size.

Running the following command with qemu-image 4.2.1 can get a corrupted
coverted image file easily.

    qemu-img convert -p -t none -T none -f qcow2 $qcow_image \
             -O qcow2 -o compat=1.1 $qcow_image.conv

The usage of fallocate in qemu is like this, it first punches holes out
of inode size, then extend the inode size.

    fallocate(11, FALLOC_FL_KEEP_SIZE|FALLOC_FL_PUNCH_HOLE, 2276196352, 65536) = 0
    fallocate(11, 0, 2276196352, 65536) = 0

v1: https://www.spinics.net/lists/linux-fsdevel/msg193999.html
v2: https://lore.kernel.org/linux-fsdevel/20210525093034.GB4112@quack2.suse.cz/T/

Link: https://lkml.kernel.org/r/20210528210648.9124-1-junxiao.bi@oracle.comSigned-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix W=1 kernel build warning:

  lib/crc64.c:40: warning:
   bad line:         or the previous crc64 value if computing incrementally.

Link: https://lkml.kernel.org/r/20210601135851.15444-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Coly Li <colyli@suse.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The userfaultfd hugetlb tests cause a resv_huge_pages underflow.  This
happens when hugetlb_mcopy_atomic_pte() is called with !is_continue on
an index for which we already have a page in the cache.  When this
happens, we allocate a second page, double consuming the reservation,
and then fail to insert the page into the cache and return -EEXIST.

To fix this, we first check if there is a page in the cache which
already consumed the reservation, and return -EEXIST immediately if so.

There is still a rare condition where we fail to copy the page contents
AND race with a call for hugetlb_no_page() for this index and again we
will underflow resv_huge_pages.  That is fixed in a more complicated
patch not targeted for -stable.

Test:

  Hacked the code locally such that resv_huge_pages underflows produce a
  warning, then:

  ./tools/testing/selftests/vm/userfaultfd hugetlb_shared 10
	2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success
  ./tools/testing/selftests/vm/userfaultfd hugetlb 10
	2 /tmp/kokonut_test/huge/userfaultfd_test && echo test success

Both tests succeed and produce no warnings.  After the test runs number
of free/resv hugepages is correct.

[mike.kravetz@oracle.com: changelog fixes]

Link: https://lkml.kernel.org/r/20210528004649.85298-1-almasrymina@google.com
Fixes: 8fb5debc ("userfaultfd: hugetlbfs: add hugetlb_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix gcc W=1 warning:

  mm/kasan/init.c:228: warning: Function parameter or member 'shadow_start' not described in 'kasan_populate_early_shadow'
  mm/kasan/init.c:228: warning: Function parameter or member 'shadow_end' not described in 'kasan_populate_early_shadow'

Link: https://lkml.kernel.org/r/20210603140700.3045298-1-yukuai3@huawei.comSigned-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This new selftest needs an entry in the .gitignore file otherwise git
will try to track the binary.

Link: https://lkml.kernel.org/r/20210601164305.11776-1-dmatlack@google.com
Fixes: 268af17a ("selftests: proc: test subset=pid")
Signed-off-by: David Matlack <dmatlack@google.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When memory_failure() or soft_offline_page() is called on a tail page of
some hugetlb page, "BUG: unable to handle page fault" error can be
triggered.

remove_hugetlb_page() dereferences page->lru, so it's assumed that the
page points to a head page, but one of the caller,
dissolve_free_huge_page(), provides remove_hugetlb_page() with 'page'
which could be a tail page.  So pass 'head' to it, instead.

Link: https://lkml.kernel.org/r/20210526235257.2769473-1-nao.horiguchi@gmail.com
Fixes: 6eb4e88a ("hugetlb: create remove_hugetlb_page() to separate functionality")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

offline_pages() properly checks for memory holes and bails out.
However, we do a page_zone(pfn_to_page(start_pfn)) before calling
offline_pages() when offlining a memory block.

We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on
aarch64 in offlining code, otherwise we can trigger a BUG when hitting a
memory hole:

   kernel BUG at include/linux/mm.h:1383!
   Internal error: Oops - BUG: 0 [#1] SMP
   Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class
   CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4
   Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020
   pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
   pc : memory_subsys_offline+0x1f8/0x250
   lr : memory_subsys_offline+0x1f8/0x250
   Call trace:
     memory_subsys_offline+0x1f8/0x250
     device_offline+0x154/0x1d8
     online_store+0xa4/0x118
     dev_attr_store+0x44/0x78
     sysfs_kf_write+0xe8/0x138
     kernfs_fop_write_iter+0x26c/0x3d0
     new_sync_write+0x2bc/0x4f8
     vfs_write+0x718/0xc88
     ksys_write+0xf8/0x1e0
     __arm64_sys_write+0x74/0xa8
     invoke_syscall.constprop.0+0x78/0x1e8
     do_el0_svc+0xe4/0x298
     el0_svc+0x20/0x30
     el0_sync_handler+0xb0/0xb8
     el0_sync+0x178/0x180
   Kernel panic - not syncing: Oops - BUG: Fatal exception
   SMP: stopping secondary CPUs
   Kernel Offset: disabled
   CPU features: 0x00000251,20000846
   Memory Limit: none

If nr_vmemmap_pages is set, we know that we are dealing with hotplugged
memory that doesn't have any holes.  So call
page_zone(pfn_to_page(start_pfn)) only when really necessary -- when
nr_vmemmap_pages is set and we actually adjust the present pages.

Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com
Fixes: a08a2ae3 ("mm,memory_hotplug: allocate memmap from the added memory range")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai (QUIC) <quic_qiancai@quicinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Rapoport <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Recently we found that there is a lot MemFree left in /proc/meminfo
after do a lot of pages soft offline, it's not quite correct.

Before Oscar's rework of soft offline for free pages [1], if we soft
offline free pages, these pages are left in buddy with HWPoison flag,
and NR_FREE_PAGES is not updated immediately.  So the difference between
NR_FREE_PAGES and real number of available free pages is also even big
at the beginning.

However, with the workload running, when we catch HWPoison page in any
alloc functions subsequently, we will remove it from buddy, meanwhile
update the NR_FREE_PAGES and try again, so the NR_FREE_PAGES will get
more and more closer to the real number of available free pages.
(regardless of unpoison_memory())

Now, for offline free pages, after a successful call
take_page_off_buddy(), the page is no longer belong to buddy allocator,
and will not be used any more, but we missed accounting NR_FREE_PAGES in
this situation, and there is no chance to be updated later.

Do update in take_page_off_buddy() like rmqueue() does, but avoid double
counting if some one already set_migratetype_isolate() on the page.

[1]: commit 06be6ff3 ("mm,hwpoison: rework soft offline for free pages")

Link: https://lkml.kernel.org/r/20210526075247.11130-1-dinghui@sangfor.com.cn
Fixes: 06be6ff3 ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In pmd/pud_advanced_tests(), the vaddr is aligned up to the next pmd/pud
entry, and so it does not match the given pmdp/pudp and (aligned down)
pfn any more.

For s390, this results in memory corruption, because the IDTE
instruction used e.g.  in xxx_get_and_clear() will take the vaddr for
some calculations, in combination with the given pmdp.  It will then end
up with a wrong table origin, ending on ...ff8, and some of those
wrongly set low-order bits will also select a wrong pagetable level for
the index addition.  IDTE could therefore invalidate (or 0x20) something
outside of the page tables, depending on the wrongly picked index, which
in turn depends on the random vaddr.

As result, we sometimes see "BUG task_struct (Not tainted): Padding
overwritten" on s390, where one 0x5a padding value got overwritten with
0x7a.

Fix this by aligning down, similar to how the pmd/pud_aligned pfns are
calculated.

Link: https://lkml.kernel.org/r/20210525130043.186290-2-gerald.schaefer@linux.ibm.com
Fixes: a5c3b9ff ("mm/debug_vm_pgtable: add tests validating advanced arch page table helpers")
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: <stable@vger.kernel.org>	[5.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During boot, kernel_init_freeable() initializes `cad_pid` to the init
task's struct pid.  Later on, we may change `cad_pid` via a sysctl, and
when this happens proc_do_cad_pid() will increment the refcount on the
new pid via get_pid(), and will decrement the refcount on the old pid
via put_pid().  As we never called get_pid() when we initialized
`cad_pid`, we decrement a reference we never incremented, can therefore
free the init task's struct pid early.  As there can be dangling
references to the struct pid, we can later encounter a use-after-free
(e.g.  when delivering signals).

This was spotted when fuzzing v5.13-rc3 with Syzkaller, but seems to
have been around since the conversion of `cad_pid` to struct pid in
commit 9ec52099 ("[PATCH] replace cad_pid by a struct pid") from the
pre-KASAN stone age of v2.6.19.

Fix this by getting a reference to the init task's struct pid when we
assign it to `cad_pid`.

Full KASAN splat below.

   ==================================================================
   BUG: KASAN: use-after-free in ns_of_pid include/linux/pid.h:153 [inline]
   BUG: KASAN: use-after-free in task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
   Read of size 4 at addr ffff23794dda0004 by task syz-executor.0/273

   CPU: 1 PID: 273 Comm: syz-executor.0 Not tainted 5.12.0-00001-g9aef892b2d15 #1
   Hardware name: linux,dummy-virt (DT)
   Call trace:
    ns_of_pid include/linux/pid.h:153 [inline]
    task_active_pid_ns+0xc0/0xc8 kernel/pid.c:509
    do_notify_parent+0x308/0xe60 kernel/signal.c:1950
    exit_notify kernel/exit.c:682 [inline]
    do_exit+0x2334/0x2bd0 kernel/exit.c:845
    do_group_exit+0x108/0x2c8 kernel/exit.c:922
    get_signal+0x4e4/0x2a88 kernel/signal.c:2781
    do_signal arch/arm64/kernel/signal.c:882 [inline]
    do_notify_resume+0x300/0x970 arch/arm64/kernel/signal.c:936
    work_pending+0xc/0x2dc

   Allocated by task 0:
    slab_post_alloc_hook+0x50/0x5c0 mm/slab.h:516
    slab_alloc_node mm/slub.c:2907 [inline]
    slab_alloc mm/slub.c:2915 [inline]
    kmem_cache_alloc+0x1f4/0x4c0 mm/slub.c:2920
    alloc_pid+0xdc/0xc00 kernel/pid.c:180
    copy_process+0x2794/0x5e18 kernel/fork.c:2129
    kernel_clone+0x194/0x13c8 kernel/fork.c:2500
    kernel_thread+0xd4/0x110 kernel/fork.c:2552
    rest_init+0x44/0x4a0 init/main.c:687
    arch_call_rest_init+0x1c/0x28
    start_kernel+0x520/0x554 init/main.c:1064
    0x0

   Freed by task 270:
    slab_free_hook mm/slub.c:1562 [inline]
    slab_free_freelist_hook+0x98/0x260 mm/slub.c:1600
    slab_free mm/slub.c:3161 [inline]
    kmem_cache_free+0x224/0x8e0 mm/slub.c:3177
    put_pid.part.4+0xe0/0x1a8 kernel/pid.c:114
    put_pid+0x30/0x48 kernel/pid.c:109
    proc_do_cad_pid+0x190/0x1b0 kernel/sysctl.c:1401
    proc_sys_call_handler+0x338/0x4b0 fs/proc/proc_sysctl.c:591
    proc_sys_write+0x34/0x48 fs/proc/proc_sysctl.c:617
    call_write_iter include/linux/fs.h:1977 [inline]
    new_sync_write+0x3ac/0x510 fs/read_write.c:518
    vfs_write fs/read_write.c:605 [inline]
    vfs_write+0x9c4/0x1018 fs/read_write.c:585
    ksys_write+0x124/0x240 fs/read_write.c:658
    __do_sys_write fs/read_write.c:670 [inline]
    __se_sys_write fs/read_write.c:667 [inline]
    __arm64_sys_write+0x78/0xb0 fs/read_write.c:667
    __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline]
    invoke_syscall arch/arm64/kernel/syscall.c:49 [inline]
    el0_svc_common.constprop.1+0x16c/0x388 arch/arm64/kernel/syscall.c:129
    do_el0_svc+0xf8/0x150 arch/arm64/kernel/syscall.c:168
    el0_svc+0x28/0x38 arch/arm64/kernel/entry-common.c:416
    el0_sync_handler+0x134/0x180 arch/arm64/kernel/entry-common.c:432
    el0_sync+0x154/0x180 arch/arm64/kernel/entry.S:701

   The buggy address belongs to the object at ffff23794dda0000
    which belongs to the cache pid of size 224
   The buggy address is located 4 bytes inside of
    224-byte region [ffff23794dda0000, ffff23794dda00e0)
   The buggy address belongs to the page:
   page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4dda0
   head:(____ptrval____) order:1 compound_mapcount:0
   flags: 0x3fffc0000010200(slab|head)
   raw: 03fffc0000010200 dead000000000100 dead000000000122 ffff23794d40d080
   raw: 0000000000000000 0000000000190019 00000001ffffffff 0000000000000000
   page dumped because: kasan: bad access detected

   Memory state around the buggy address:
    ffff23794dd9ff00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
    ffff23794dd9ff80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
   >ffff23794dda0000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                      ^
    ffff23794dda0080: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
    ffff23794dda0100: fc fc fc fc fc fc fc fc 00 00 00 00 00 00 00 00
   ==================================================================

Link: https://lkml.kernel.org/r/20210524172230.38715-1-mark.rutland@arm.com
Fixes: 9ec52099 ("[PATCH] replace cad_pid by a struct pid")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since wait_event() uses TASK_UNINTERRUPTIBLE by default, waiting for an
allocation counts towards load.  However, for KFENCE, this does not make
any sense, since there is no busy work we're awaiting.

Instead, use TASK_IDLE via wait_event_idle() to not count towards load.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1185565
Link: https://lkml.kernel.org/r/20210521083209.3740269-1-elver@google.com
Fixes: 407f1d8c ("kfence: await for allocation using wait_event")
Signed-off-by: Marco Elver <elver@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Hillf Danton <hdanton@sina.com>
Cc: <stable@vger.kernel.org>	[5.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit f685a533.

The MIPS cache flush logic needs to know whether the mapping was already
established to decide how to flush caches.  This is done by checking the
valid bit in the PTE.  The commit above breaks this logic by setting the
valid in the PTE in new mappings, which causes kernel crashes.

Link: https://lkml.kernel.org/r/20210526094335.92948-1-tsbogend@alpha.franken.de
Fixes: f685a533 ("MIPS: make userspace mapping young by default")
Reported-by: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Huang Pei <huangpei@loongson.cn>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from bpf, wireless, netfilter and
  wireguard trees.

  The bpf vs lockdown+audit fix is the most notable.

  Things haven't slowed down just yet, both in terms of regressions in
  current release and largish fixes for older code, but we usually see a
  slowdown only after -rc5.

  Current release - regressions:

   - virtio-net: fix page faults and crashes when XDP is enabled

   - mlx5e: fix HW timestamping with CQE compression, and make sure they
     are only allowed to coexist with capable devices

   - stmmac:
      - fix kernel panic due to NULL pointer dereference of
        mdio_bus_data
      - fix double clk unprepare when no PHY device is connected

  Current release - new code bugs:

   - mt76: a few fixes for the recent MT7921 devices and runtime power
     management

  Previous releases - regressions:

   - ice:
      - track AF_XDP ZC enabled queues in bitmap to fix copy mode Tx
      - fix allowing VF to request more/less queues via virtchnl
      - correct supported and advertised autoneg by using PHY
        capabilities
      - allow all LLDP packets from PF to Tx

   - kbuild: quote OBJCOPY var to avoid a pahole call break the build

  Previous releases - always broken:

   - bpf, lockdown, audit: fix buggy SELinux lockdown permission checks

   - mt76: address the recent FragAttack vulnerabilities not covered by
     generic fixes

   - ipv6: fix KASAN: slab-out-of-bounds Read in
     fib6_nh_flush_exceptions

   - Bluetooth:
      - fix the erroneous flush_work() order, to avoid double free
      - use correct lock to prevent UAF of hdev object

   - nfc: fix NULL ptr dereference in llcp_sock_getname() after failed
     connect

   - ieee802154: multiple fixes to error checking and return values

   - igb: fix XDP with PTP enabled

   - intel: add correct exception tracing for XDP

   - tls: fix use-after-free when TLS offload device goes down and back
     up

   - ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service

   - netfilter: nft_ct: skip expectations for confirmed conntrack

   - mptcp: fix falling back to TCP in presence of out of order packets
     early in connection lifetime

   - wireguard: switch from O(n) to a O(1) algorithm for maintaining
     peers, fixing stalls and a large memory leak in the process

  Misc:

   - devlink: correct VIRTUAL port to not have phys_port attributes

   - Bluetooth: fix VIRTIO_ID_BT assigned number

   - net: return the correct errno code ENOBUF -> ENOMEM

   - wireguard:
      - peer: allocate in kmem_cache saving 25% on peer memory
      - do not use -O3"

* tag 'net-5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits)
  cxgb4: avoid link re-train during TC-MQPRIO configuration
  sch_htb: fix refcount leak in htb_parent_to_leaf_offload
  wireguard: allowedips: free empty intermediate nodes when removing single node
  wireguard: allowedips: allocate nodes in kmem_cache
  wireguard: allowedips: remove nodes in O(1)
  wireguard: allowedips: initialize list head in selftest
  wireguard: peer: allocate in kmem_cache
  wireguard: use synchronize_net rather than synchronize_rcu
  wireguard: do not use -O3
  wireguard: selftests: make sure rp_filter is disabled on vethc
  wireguard: selftests: remove old conntrack kconfig value
  virtchnl: Add missing padding to virtchnl_proto_hdrs
  ice: Allow all LLDP packets from PF to Tx
  ice: report supported and advertised autoneg using PHY capabilities
  ice: handle the VF VSI rebuild failure
  ice: Fix VFR issues for AVF drivers that expect ATQLEN cleared
  ice: Fix allowing VF to request more/less queues via virtchnl
  virtio-net: fix for skb_over_panic inside big mode
  ipv6: Fix KASAN: slab-out-of-bounds Read in fib6_nh_flush_exceptions
  fib: Return the correct errno code
  ...

Merge tag 'perf-tools-fixes-for-v5.13-2021-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix NULL pointer dereference in 'perf probe' when handling
   DW_AT_const_value when looking for a variable, which is valid.

 - Fix for capability querying of perf_event_attr.cgroup support in
   older kernels.

 - Add missing cloning of evsel->use_config_name.

 - Honor event config name on --no-merge in 'perf stat'.

 - Fix some memory leaks found using ASAN.

 - Fix the perf entry for perf_event_attr setup with make LIBPFM4=1 on
   s390 z/VM.

 - Update MIPS UAPI perf_regs.h file.

 - Fix 'perf stat' BPF counter load return check.

* tag 'perf-tools-fixes-for-v5.13-2021-06-04' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf env: Fix memory leak of bpf_prog_info_linear member
  perf symbol-elf: Fix memory leak by freeing sdt_note.args
  perf stat: Honor event config name on --no-merge
  perf evsel: Add missing cloning of evsel->use_config_name
  perf test: Test 17 fails with make LIBPFM4=1 on s390 z/VM
  perf stat: Fix error return code in bperf__load()
  perf record: Move probing cgroup sampling support
  perf probe: Fix NULL pointer dereference in convert_variable_location()
  perf tools: Copy uapi/asm/perf_regs.h from the kernel for MIPS

Pull PCI fixes from Bjorn Helgaas:

 - Fix MSIs for platforms with "msi-map" device-tree property, which we
   broke in v5.13-rc1 (Jean-Philippe Brucker)

 - Add Krzysztof Wilczyński as PCI reviewer (Lorenzo Pieralisi)

* tag 'pci-v5.13-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/MSI: Fix MSIs for generic hosts that use device-tree's "msi-map"
  MAINTAINERS: Add Krzysztof as PCI host/endpoint controllers reviewer