This patch extends is_branch_taken() logic from JMP+K instructions
to JMP+X instructions.
Conditional branches are often done when src and dst registers
contain known scalars. In such case the verifier can follow
the branch that is going to be taken when program executes.
That speeds up the verification and is essential feature to support
bounded loops.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

fix tests that incorrectly assumed that the verifier
cannot track constants through stack.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Compilers often spill induction variables into the stack,
hence it is necessary for the verifier to track scalar values
of the registers through stack slots.

Also few bpf programs were incorrectly rejected in the past,
since the verifier was not able to track such constants while
they were used to compute offsets into packet headers.

Tracking constants through the stack significantly decreases
the chances of state pruning, since two different constants
are considered to be different by state equivalency.
End result that cilium tests suffer serious degradation in the number
of states processed and corresponding verification time increase.

                     before  after
bpf_lb-DLB_L3.o      1838    6441
bpf_lb-DLB_L4.o      3218    5908
bpf_lb-DUNKNOWN.o    1064    1064
bpf_lxc-DDROP_ALL.o  26935   93790
bpf_lxc-DUNKNOWN.o   34439   123886
bpf_netdev.o         9721    31413
bpf_overlay.o        6184    18561
bpf_lxc_jit.o        39389   359445

After further debugging turned out that cillium progs are
getting hurt by clang due to the same constant tracking issue.
Newer clang generates better code by spilling less to the stack.
Instead it keeps more constants in the registers which
hurts state pruning since the verifier already tracks constants
in the registers:
                  old clang  new clang
                         (no spill/fill tracking introduced by this patch)
bpf_lb-DLB_L3.o      1838    1923
bpf_lb-DLB_L4.o      3218    3077
bpf_lb-DUNKNOWN.o    1064    1062
bpf_lxc-DDROP_ALL.o  26935   166729
bpf_lxc-DUNKNOWN.o   34439   174607
bpf_netdev.o         9721    8407
bpf_overlay.o        6184    5420
bpf_lcx_jit.o        39389   39389

The final table is depressing:
                  old clang  old clang    new clang  new clang
                           const spill/fill        const spill/fill
bpf_lb-DLB_L3.o      1838    6441          1923      8128
bpf_lb-DLB_L4.o      3218    5908          3077      6707
bpf_lb-DUNKNOWN.o    1064    1064          1062      1062
bpf_lxc-DDROP_ALL.o  26935   93790         166729    380712
bpf_lxc-DUNKNOWN.o   34439   123886        174607    440652
bpf_netdev.o         9721    31413         8407      31904
bpf_overlay.o        6184    18561         5420      23569
bpf_lxc_jit.o        39389   359445        39389     359445

Tracking constants in the registers hurts state pruning already.
Adding tracking of constants through stack hurts pruning even more.
The later patch address this general constant tracking issue
with coarse/precise logic.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add const qualifiers to bpf_object/bpf_program/bpf_map arguments for
getter APIs. There is no need for them to not be const pointers.

Verified that

make -C tools/lib/bpf
make -C tools/testing/selftests/bpf
make -C tools/perf

all build without warnings.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Currently, header inclusion in each file is inconsistent.
For example, "libbpf.h" header is included as multiple ways.

    #include "bpf/libbpf.h"
    #include "libbpf.h"

Due to commit b552d33c ("samples/bpf: fix include path
in Makefile"), $(srctree)/tools/lib/bpf/ path had been included
during build, path "bpf/" in header isn't necessary anymore.

This commit removes path "bpf/" in header inclusion.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Due to recent change of include path at commit b552d33c
("samples/bpf: fix include path in Makefile"), some of the
previous include options became unnecessary.

This commit removes duplicated include options in Makefile.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Andrii Nakryiko says:

====================
This patch set implements initial version (as discussed at LSF/MM2019
conference) of a new way to specify BPF maps, relying on BTF type information,
which allows for easy extensibility, preserving forward and backward
compatibility. See details and examples in description for patch #6.

[0] contains an outline of follow up extensions to be added after this basic
set of features lands. They are useful by itself, but also allows to bring
libbpf to feature-parity with iproute2 BPF loader. That should open a path
forward for BPF loaders unification.

Patch #1 centralizes commonly used min/max macro in libbpf_internal.h.
Patch #2 extracts .BTF and .BTF.ext loading loging from elf_collect().
Patch #3 simplifies elf_collect() error-handling logic.
Patch #4 refactors map initialization logic into user-provided maps and global
data maps, in preparation to adding another way (BTF-defined maps).
Patch #5 adds support for map definitions in multiple ELF sections and
deprecates bpf_object__find_map_by_offset() API which doesn't appear to be
used anymore and makes assumption that all map definitions reside in single
ELF section.
Patch #6 splits BTF intialization from sanitization/loading into kernel to
preserve original BTF at the time of map initialization.
Patch #7 adds support for BTF-defined maps.
Patch #8 adds new test for BTF-defined map definition.
Patches #9-11 convert test BPF map definitions to use BTF way.

[0] https://lore.kernel.org/bpf/CAEf4BzbfdG2ub7gCi0OYqBrUoChVHWsmOntWAkJt47=FE+km+A@mail.gmail.com/

v1->v2:
- more BTF-sanity checks in parsing map definitions (Song);
- removed confusing usage of "attribute", switched to "field;
- split off elf_collect() refactor from btf loading refactor (Song);
- split selftests conversion into 3 patches (Stanislav):
  1. test already relying on BTF;
  2. tests w/ custom types as key/value (so benefiting from BTF);
  3. all the rest tests (integers as key/value, special maps w/o BTF support).
- smaller code improvements (Song);

rfc->v1:
- error out on unknown field by default (Stanislav, Jakub, Lorenz);
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Convert a bulk of selftests that have maps with custom (not integer) key
and/or value.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Switch tests that already rely on BTF to BTF-defined map definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add file test for BTF-defined map definition.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds support for a new way to define BPF maps. It relies on
BTF to describe mandatory and optional attributes of a map, as well as
captures type information of key and value naturally. This eliminates
the need for BPF_ANNOTATE_KV_PAIR hack and ensures key/value sizes are
always in sync with the key/value type.

Relying on BTF, this approach allows for both forward and backward
compatibility w.r.t. extending supported map definition features. By
default, any unrecognized attributes are treated as an error, but it's
possible relax this using MAPS_RELAX_COMPAT flag. New attributes, added
in the future will need to be optional.

The outline of the new map definition (short, BTF-defined maps) is as follows:
1. All the maps should be defined in .maps ELF section. It's possible to
   have both "legacy" map definitions in `maps` sections and BTF-defined
   maps in .maps sections. Everything will still work transparently.
2. The map declaration and initialization is done through
   a global/static variable of a struct type with few mandatory and
   extra optional fields:
   - type field is mandatory and specified type of BPF map;
   - key/value fields are mandatory and capture key/value type/size information;
   - max_entries attribute is optional; if max_entries is not specified or
     initialized, it has to be provided in runtime through libbpf API
     before loading bpf_object;
   - map_flags is optional and if not defined, will be assumed to be 0.
3. Key/value fields should be **a pointer** to a type describing
   key/value. The pointee type is assumed (and will be recorded as such
   and used for size determination) to be a type describing key/value of
   the map. This is done to save excessive amounts of space allocated in
   corresponding ELF sections for key/value of big size.
4. As some maps disallow having BTF type ID associated with key/value,
   it's possible to specify key/value size explicitly without
   associating BTF type ID with it. Use key_size and value_size fields
   to do that (see example below).

Here's an example of simple ARRAY map defintion:

struct my_value { int x, y, z; };

struct {
	int type;
	int max_entries;
	int *key;
	struct my_value *value;
} btf_map SEC(".maps") = {
	.type = BPF_MAP_TYPE_ARRAY,
	.max_entries = 16,
};

This will define BPF ARRAY map 'btf_map' with 16 elements. The key will
be of type int and thus key size will be 4 bytes. The value is struct
my_value of size 12 bytes. This map can be used from C code exactly the
same as with existing maps defined through struct bpf_map_def.

Here's an example of STACKMAP definition (which currently disallows BTF type
IDs for key/value):

struct {
	__u32 type;
	__u32 max_entries;
	__u32 map_flags;
	__u32 key_size;
	__u32 value_size;
} stackmap SEC(".maps") = {
	.type = BPF_MAP_TYPE_STACK_TRACE,
	.max_entries = 128,
	.map_flags = BPF_F_STACK_BUILD_ID,
	.key_size = sizeof(__u32),
	.value_size = PERF_MAX_STACK_DEPTH * sizeof(struct bpf_stack_build_id),
};

This approach is naturally extended to support map-in-map, by making a value
field to be another struct that describes inner map. This feature is not
implemented yet. It's also possible to incrementally add features like pinning
with full backwards and forward compatibility. Support for static
initialization of BPF_MAP_TYPE_PROG_ARRAY using pointers to BPF programs
is also on the roadmap.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Libbpf does sanitization of BTF before loading it into kernel, if kernel
doesn't support some of newer BTF features. This removes some of the
important information from BTF (e.g., DATASEC and VAR description),
which will be used for map construction. This patch splits BTF
processing into initialization step, in which BTF is initialized from
ELF and all the original data is still preserved; and
sanitization/loading step, which ensures that BTF is safe to load into
kernel. This allows to use full BTF information to construct maps, while
still loading valid BTF into older kernels.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

To support maps to be defined in multiple sections, it's important to
identify map not just by offset within its section, but section index as
well. This patch adds tracking of section index.

For global data, we record section index of corresponding
.data/.bss/.rodata ELF section for uniformity, and thus don't need
a special value of offset for those maps.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

User and global data maps initialization has gotten pretty complicated
and unnecessarily convoluted. This patch splits out the logic for global
data map and user-defined map initialization. It also removes the
restriction of pre-calculating how many maps will be initialized,
instead allowing to keep adding new maps as they are discovered, which
will be used later for BTF-defined map definitions.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Simplify ELF parsing logic by exiting early, as there is no common clean
up path to execute. That makes it unnecessary to track when err was set
and when it was cleared. It also reduces nesting in some places.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

As a preparation for adding BTF-based BPF map loading, extract .BTF and
.BTF.ext loading logic.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Multiple files in libbpf redefine their own definitions for min/max.
Let's define them in libbpf_internal.h and use those everywhere.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If CONFIG_INET is not set, building fails:

kernel/bpf/verifier.o: In function `check_mem_access':
verifier.c: undefined reference to `bpf_xdp_sock_is_valid_access'
kernel/bpf/verifier.o: In function `convert_ctx_accesses':
verifier.c: undefined reference to `bpf_xdp_sock_convert_ctx_access'
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: fada7fdc ("bpf: Allow bpf_map_lookup_elem() on an xskmap")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This lets us test that both BPF_PROG_TYPE_CGROUP_SOCK_ADDR and
BPF_PROG_TYPE_SOCK_OPS can access underlying bpf_sock.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add sk to struct bpf_sock_addr and struct bpf_sock_ops.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

And let it use bpf_sk_storage_{get,delete} helpers to access socket
storage. Kernel context (struct bpf_sock_ops_kern) already has sk
member, so I just expose it to the BPF hooks. I use
PTR_TO_SOCKET_OR_NULL and return NULL in !is_fullsock case.

I also export bpf_tcp_sock to make it possible to access tcp socket stats.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

And let it use bpf_sk_storage_{get,delete} helpers to access socket
storage. Kernel context (struct bpf_sock_addr_kern) already has sk
member, so I just expose it to the BPF hooks. Using PTR_TO_SOCKET
instead of PTR_TO_SOCK_COMMON should be safe because the hook is
called on bind/connect.

Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This patch adds a test for the new sockopt SO_REUSEPORT_DETACH_BPF.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

SO_DETACH_REUSEPORT_BPF is needed for the test in the next patch.
It is defined in the socket.h.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

There is SO_ATTACH_REUSEPORT_[CE]BPF but there is no DETACH.
This patch adds SO_DETACH_REUSEPORT_BPF sockopt.  The same
sockopt can be used to undo both SO_ATTACH_REUSEPORT_[CE]BPF.

reseport_detach_prog() is added and it is mostly a mirror
of the existing reuseport_attach_prog().  The differences are,
it does not call reuseport_alloc() and returns -ENOENT when
there is no old prog.

Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Kernel internally checks that either key or value type ID is specified,
before using btf_fd. Do the same in libbpf's map creation code for
determining when to retry map creation w/o BTF.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: fba01a06 ("libbpf: use negative fd to specify missing BTF")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The "len" variable needs to be signed for the error handling to work
properly.

Fixes: 596092ef ("selftests/bpf: enable all available cgroup v2 controllers")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Recent commit included libbpf.h in selftests/bpf/bpf_util.h.
Since some samples use bpf_util.h and samples/bpf/Makefile doesn't
have libbpf.h path included, build was failing. Let's add the path
in samples/bpf/Makefile.
Signed-off-by: Prashant Bhole <prashantbhole.linux@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Compiling kernel/bpf/core.c with W=1 causes a flood of warnings:

kernel/bpf/core.c:1198:65: warning: initialized field overwritten [-Woverride-init]
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~
kernel/bpf/core.c:1198:65: note: (near initialization for 'public_insntable[12]')
 1198 | #define BPF_INSN_3_TBL(x, y, z) [BPF_##x | BPF_##y | BPF_##z] = true
      |                                                                 ^~~~
kernel/bpf/core.c:1087:2: note: in expansion of macro 'BPF_INSN_3_TBL'
 1087 |  INSN_3(ALU, ADD,  X),   \
      |  ^~~~~~
kernel/bpf/core.c:1202:3: note: in expansion of macro 'BPF_INSN_MAP'
 1202 |   BPF_INSN_MAP(BPF_INSN_2_TBL, BPF_INSN_3_TBL),
      |   ^~~~~~~~~~~~

98 copies of the above.

The attached patch silences the warnings, because we *know* we're overwriting
the default initializer. That leaves bpf/core.c with only 6 other warnings,
which become more visible in comparison.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Hechao Li says:

====================
Getting number of possible CPUs is commonly used for per-CPU BPF maps
and perf_event_maps. Add a new API libbpf_num_possible_cpus() that
helps user with per-CPU related operations and remove duplicate
implementations in bpftool and selftests.

v2: Save errno before calling pr_warning in case it is changed.
v3: Make sure libbpf_num_possible_cpus never returns 0 so that user only
    has to check if ret value < 0.
v4: Fix error code when reading 0 bytes from possible CPU file.
v5: Fix selftests compliation issue.
v6: Split commit to reuse libbpf_num_possible_cpus() into two commits:
    One commit to remove bpf_util.h from test BPF C programs.
    One commit to reuse libbpf_num_possible_cpus() in bpftools
    and bpf_util.h.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Use the newly added bpf_num_possible_cpus() in bpftool and selftests
and remove duplicate implementations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Though currently there is no problem including bpf_util.h in kernel
space BPF C programs, in next patch in this stack, I will reuse
libbpf_num_possible_cpus() in bpf_util.h thus include libbpf.h in it,
which will cause BPF C programs compile error. Therefore I will first
remove bpf_util.h from all test BPF programs.

This can also make it clear that bpf_util.h is a user-space utility
while bpf_helpers.h is a kernel space utility.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Adding a new API libbpf_num_possible_cpus() that helps user with
per-CPU map operations.
Signed-off-by: Hechao Li <hechaol@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

An error "implicit declaration of function 'reallocarray'" can be thrown
with the following steps:

$ cd tools/testing/selftests/bpf
$ make clean && make CC=<Path to GCC 4.8.5>
$ make clean && make CC=<Path to GCC 7.x>

The cause is that the feature folder generated by GCC 4.8.5 is not
removed, leaving feature-reallocarray being 1, which causes reallocarray
not defined when re-compliing with GCC 7.x. This diff adds feature
folder to EXTRA_CLEAN to avoid this problem.

v2: Rephrase the commit message.
Signed-off-by: Hechao Li <hechaol@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix signature of bpf_probe_read and bpf_probe_write_user to mark source
pointer as const. This causes warnings during compilation for
applications relying on those helpers.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Quentin reports that commit 07c3bbdb ("samples: bpf: print
a warning about headers_install") is producing the false
positive when make is invoked locally, from the samples/bpf/
directory.

When make is run locally it hits the "all" target, which
will recursively invoke make through the full build system.

Speed up the "local" run which doesn't actually build anything,
and avoid false positives by skipping all the probes if not in
kbuild environment (cover both the new warning and the BTF
probes).
Reported-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jonathan Lemon says:

====================
Currently, the AF_XDP code uses a separate map in order to
determine if an xsk is bound to a queue.  Have the xskmap
lookup return a XDP_SOCK pointer on the kernel side, which
the verifier uses to extract relevant values.

Patches:
 1 - adds XSK_SOCK type
 2 - sync bpf.h with tools
 3 - add tools selftest
 4 - update lib/bpf, removing qidconf

v4->v5:
 - xskmap lookup now returns XDP_SOCK type instead of pointer to element.
 - no changes lib/bpf/xsk.c

v3->v4:
 - Clarify error handling path.

v2->v3:
 - Use correct map type.
====================
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Use the recent change to XSKMAP bpf_map_lookup_elem() to test if
there is a xsk present in the map instead of duplicating the work
with qidconf.

Fix things so callers using XSK_LIBBPF_FLAGS__INHIBIT_PROG_LOAD
bypass any internal bpf maps, so xsk_socket__{create|delete} works
properly.

Clean up error handling path.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Tested-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Check that bpf_map_lookup_elem lookup and structure
access operats correctly.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Sync uapi/linux/bpf.h
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>