Since xsk APIs has been removed from libbpf, let's clean up the
BPF docs simutaneously.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20220708042736.669132-1-pulehui@huawei.com

This benchmark measures grace period latency and kthread cpu usage of
RCU Tasks Trace when many processes are creating/deleting BPF
local_storage. Intent here is to quantify improvement on these metrics
after Paul's recent RCU Tasks patches [0].

Specifically, fork 15k tasks which call a bpf prog that creates/destroys
task local_storage and sleep in a loop, resulting in many
call_rcu_tasks_trace calls.

To determine grace period latency, trace time elapsed between
rcu_tasks_trace_pregp_step and rcu_tasks_trace_postgp; for cpu usage
look at rcu_task_trace_kthread's stime in /proc/PID/stat.

On my virtualized test environment (Skylake, 8 cpus) benchmark results
demonstrate significant improvement:

BEFORE Paul's patches:

  SUMMARY tasks_trace grace period latency        avg 22298.551 us stddev 1302.165 us
  SUMMARY ticks per tasks_trace grace period      avg 2.291 stddev 0.324

AFTER Paul's patches:

  SUMMARY tasks_trace grace period latency        avg 16969.197 us  stddev 2525.053 us
  SUMMARY ticks per tasks_trace grace period      avg 1.146 stddev 0.178

Note that since these patches are not in bpf-next benchmarking was done
by cherry-picking this patch onto rcu tree.

  [0] https://lore.kernel.org/rcu/20220620225402.GA3842369@paulmck-ThinkPad-P17-Gen-1/Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220705190018.3239050-1-davemarchevsky@fb.com

According to the RISC-V calling convention register usage here [0], a0
is used as return value register, so rename it to make it consistent
with the spec.

  [0] section 18.2, table 18.2
      https://riscv.org/wp-content/uploads/2015/01/riscv-calling.pdf

Fixes: 589fed47 ("riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h")
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Amjad OULED-AMEUR <ouledameur.amjad@gmail.com>
Link: https://lore.kernel.org/bpf/20220706140204.47926-1-dlan@gentoo.org

Coverity detected that usdt_rel_ip is unconditionally overwritten
anyways, so there is no need to unnecessarily initialize it with unused
value. Clean this up.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-4-andrii@kernel.org

When compiling with -O2, GCC detects few problems with selftests/bpf, so
fix all of them. Two are real issues (uninitialized err and nums
out-of-bounds access), but two other uninitialized variables warnings
are due to GCC not being able to prove that variables are indeed
initialized under conditions under which they are used.

Fix all 4 cases, though.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-3-andrii@kernel.org

When compiling selftests/bpf in optimized mode (-O2), GCC erroneously
complains about uninitialized token variable:

  In file included from network_helpers.c:22:
  network_helpers.c: In function ‘open_netns’:
  test_progs.h:355:22: error: ‘token’ may be used uninitialized [-Werror=maybe-uninitialized]
    355 |         int ___err = libbpf_get_error(___res);                          \
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~
  network_helpers.c:440:14: note: in expansion of macro ‘ASSERT_OK_PTR’
    440 |         if (!ASSERT_OK_PTR(token, "malloc token"))
        |              ^~~~~~~~~~~~~
  In file included from /data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/libbpf.h:21,
                   from bpf_util.h:9,
                   from network_helpers.c:20:
  /data/users/andriin/linux/tools/testing/selftests/bpf/tools/include/bpf/libbpf_legacy.h:113:17: note: by argument 1 of type ‘const void *’ to ‘libbpf_get_error’ declared here
    113 | LIBBPF_API long libbpf_get_error(const void *ptr);
        |                 ^~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  make: *** [Makefile:522: /data/users/andriin/linux/tools/testing/selftests/bpf/network_helpers.o] Error 1

This is completely bogus becuase libbpf_get_error() doesn't dereference
pointer, but the only easy way to silence this is to allocate initialized
memory with calloc().
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20220705224818.4026623-2-andrii@kernel.org

The feature test to detect the availability of zlib in bpftool's
Makefile does not bring much. The library is not optional: it may or may
not be required along libbfd for disassembling instructions, but in any
case it is necessary to build feature.o or even libbpf, on which bpftool
depends.

If we remove the feature test, we lose the nicely formatted error
message, but we get a compiler error about "zlib.h: No such file or
directory", which is equally informative. Let's get rid of the test.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220705200456.285943-1-quentin@isovalent.com

Chuang Wang says:

====================
A potential scenario, when an error is returned after
add_uprobe_event_legacy() in perf_event_uprobe_open_legacy(), or
bpf_program__attach_perf_event_opts() in
bpf_program__attach_uprobe_opts() returns an error, the uprobe_event
that was previously created is not cleaned.

At the same time, the legacy kprobe_event also have similar problems.

With these patches, whenever an error is returned, it ensures that
the created kprobe_event/uprobe_event is cleaned.

V1 -> v3:

- add detail commits
- call remove_kprobe_event_legacy() on failed bpf_program__attach_perf_event_opts()

v3 -> v4:

- cleanup the legacy kprobe_event on failed add/attach_event
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

A potential scenario, when an error is returned after
add_uprobe_event_legacy() in perf_event_uprobe_open_legacy(), or
bpf_program__attach_perf_event_opts() in
bpf_program__attach_uprobe_opts() returns an error, the uprobe_event
that was previously created is not cleaned.

So, with this patch, when an error is returned, fix this by adding
remove_uprobe_event_legacy()
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-4-nashuiliang@gmail.com

Use "type" as opposed to "err" in pr_warn() after
determine_uprobe_perf_type_legacy() returns an error.
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-3-nashuiliang@gmail.com

Before the 0bc11ed5 commit ("kprobes: Allow kprobes coexist with
livepatch"), in a scenario where livepatch and kprobe coexist on the
same function entry, the creation of kprobe_event using
add_kprobe_event_legacy() will be successful, at the same time as a
trace event (e.g. /debugfs/tracing/events/kprobe/XXX) will exist, but
perf_event_open() will return an error because both livepatch and kprobe
use FTRACE_OPS_FL_IPMODIFY. As follows:

1) add a livepatch

$ insmod livepatch-XXX.ko

2) add a kprobe using tracefs API (i.e. add_kprobe_event_legacy)

$ echo 'p:mykprobe XXX' > /sys/kernel/debug/tracing/kprobe_events

3) enable this kprobe (i.e. sys_perf_event_open)

This will return an error, -EBUSY.

On Andrii Nakryiko's comment, few error paths in
bpf_program__attach_kprobe_opts() that should need to call
remove_kprobe_event_legacy().

With this patch, whenever an error is returned after
add_kprobe_event_legacy() or bpf_program__attach_perf_event_opts(), this
ensures that the created kprobe_event is cleaned.
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Signed-off-by: Jingren Zhou <zhoujingren@didiglobal.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220629151848.65587-2-nashuiliang@gmail.com

Daniel Müller says:

====================

This patch set proposes the addition of a new way for performing type queries to
BPF. It introduces the "type matches" relation, similar to what is already
present with "type exists" (in the form of bpf_core_type_exists).

"type exists" performs fairly superficial checking, mostly concerned with
whether a type exists in the kernel and is of the same kind (enum/struct/...).
Notably, compatibility checks for members of composite types is lacking.

The newly introduced "type matches" (bpf_core_type_matches) fills this gap in
that it performs stricter checks: compatibility of members and existence of
similarly named enum variants is checked as well. E.g., given these definitions:

	struct task_struct___og { int pid; int tgid; };

	struct task_struct___foo { int foo; }

'task_struct___og' would "match" the kernel type 'task_struct', because the
members match up, while 'task_struct___foo' would not match, because the
kernel's 'task_struct' has no member named 'foo'.

More precisely, the "type match" relation is defined as follows (copied from
source):
- modifiers and typedefs are stripped (and, hence, effectively ignored)
- generally speaking types need to be of same kind (struct vs. struct, union
  vs. union, etc.)
  - exceptions are struct/union behind a pointer which could also match a
    forward declaration of a struct or union, respectively, and enum vs.
    enum64 (see below)
Then, depending on type:
- integers:
  - match if size and signedness match
- arrays & pointers:
  - target types are recursively matched
- structs & unions:
  - local members need to exist in target with the same name
  - for each member we recursively check match unless it is already behind a
    pointer, in which case we only check matching names and compatible kind
- enums:
  - local variants have to have a match in target by symbolic name (but not
    numeric value)
  - size has to match (but enum may match enum64 and vice versa)
- function pointers:
  - number and position of arguments in local type has to match target
  - for each argument and the return value we recursively check match

Enabling this feature requires a new relocation to be made known to the
compiler. This is being taken care of for LLVM as part of
https://reviews.llvm.org/D126838.

If applied, among other things, usage of this functionality could have helped
flag issues such as the one discussed here
https://lore.kernel.org/all/93a20759600c05b6d9e4359a1517c88e06b44834.camel@fb.com/
earlier.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
---
Changelog:
v2 -> v3:
- renamed btfgen_mark_types_match
- covered BTF_KIND_RESTRICT in type match marking logic
- used bpf_core_names_match in more places
- reworked "behind pointer" logic
- added test using live task_struct

v1 -> v2:
- deduplicated and moved core algorithm into relo_core.c
- adjusted bpf_core_names_match to get btf_type passed in
- removed some length equality checks before strncmp usage
- correctly use kflag from targ_t instead of local_t
- added comment for meaning of kflag w/ FWD kind
- __u32 -> u32
- handle BTF_KIND_FWD properly in bpftool marking logic
- rebased
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

This change extends the existing core_reloc/kernel test to include a
type match check of a local task_struct against the kernel's definition
-- which we assume to succeed.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-11-deso@posteo.net

This change extends the type based tests with another struct type (in
addition to a_struct) to check relocations against: a_complex_struct.
This type is nested more deeply to provide additional coverage of
certain paths in the type match logic.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-10-deso@posteo.net

This change adds another type-based self-test that specifically aims to
test some more characteristics of the TYPE_MATCH logic. Specifically, it
covers a few more potential differences between types, such as different
orders, enum variant values, and integer signedness.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-9-deso@posteo.net

Now that we have type-match logic in both libbpf and the kernel, this
change adjusts the existing BPF self tests to check this functionality.
Specifically, we extend the existing type-based tests to check the
previously introduced bpf_core_type_matches macro.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-8-deso@posteo.net

This patch finalizes support for the proposed type match relation in libbpf by
adding bpf_core_type_matches() macro which emits TYPE_MATCH relocation.

Clang support for this relocation was added in [0].

  [0] https://reviews.llvm.org/D126838

Signed-off-by: Daniel Müller <deso@posteo.net>¬
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>¬
Link: https://lore.kernel.org/bpf/20220628160127.607834-7-deso@posteo.net¬

This patch adds support for the proposed type match relation to
relo_core where it is shared between userspace and kernel. It plumbs
through both kernel-side and libbpf-side support.

The matching relation is defined as follows (copy from source):
- modifiers and typedefs are stripped (and, hence, effectively ignored)
- generally speaking types need to be of same kind (struct vs. struct, union
  vs. union, etc.)
  - exceptions are struct/union behind a pointer which could also match a
    forward declaration of a struct or union, respectively, and enum vs.
    enum64 (see below)
Then, depending on type:
- integers:
  - match if size and signedness match
- arrays & pointers:
  - target types are recursively matched
- structs & unions:
  - local members need to exist in target with the same name
  - for each member we recursively check match unless it is already behind a
    pointer, in which case we only check matching names and compatible kind
- enums:
  - local variants have to have a match in target by symbolic name (but not
    numeric value)
  - size has to match (but enum may match enum64 and vice versa)
- function pointers:
  - number and position of arguments in local type has to match target
  - for each argument and the return value we recursively check match
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-5-deso@posteo.net

bpftool needs to know about the newly introduced BPF_CORE_TYPE_MATCHES
relocation for its 'gen min_core_btf' command to work properly in the
present of this relocation.
Specifically, we need to make sure to mark types and fields so that they
are present in the minimized BTF for "type match" checks to work out.
However, contrary to the existing btfgen_record_field_relo, we need to
rely on the BTF -- and not the spec -- to find fields. With this change
we handle this new variant correctly. The functionality will be tested
with follow on changes to BPF selftests, which already run against a
minimized BTF created with bpftool.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220628160127.607834-3-deso@posteo.net

In order to provide type match support we require a new type of
relocation which, in turn, requires toolchain support. Recent LLVM/Clang
versions support a new value for the last argument to the
__builtin_preserve_type_info builtin, for example.
With this change we introduce the necessary constants into relevant
header files, mirroring what the compiler may support.
Signed-off-by: Daniel Müller <deso@posteo.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220628160127.607834-2-deso@posteo.net

Remove the AF_XDP samples from samples/bpf/ as they are dependent on
the AF_XDP support in libbpf. This support has now been removed in the
1.0 release, so these samples cannot be compiled anymore. Please start
to use libxdp instead. It is backwards compatible with the AF_XDP
support that was offered in libbpf. New samples can be found in the
various xdp-project repositories connected to libxdp and by googling.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220630093717.8664-1-magnus.karlsson@gmail.com

To make it more explicit that the features listed with "bpftool feature
list" are known to bpftool, but not necessary available on the system
(as opposed to the probed features), rename the "feature list" command
into "feature list_builtins".

Note that "bpftool feature list" still works as before given that we
recognise arguments from their prefixes; but the real name of the
subcommand, in particular as displayed in the man page or the
interactive help, will now include "_builtins".

Since we update the bash completion accordingly, let's also take this
chance to redirect error output to /dev/null in the completion script,
to avoid displaying unexpected error messages when users attempt to
tab-complete.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220701093805.16920-1-quentin@isovalent.com

family is only set to either AF_INET or AF_INET6 based on len. In all
other cases we return early. Thus the check against AF_UNSPEC can be
omitted.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220630082618.15649-1-tklauser@distanz.ch

With arch_prepare_bpf_trampoline removed on x86:

  [...]
  #98/1    lsm_cgroup/functional:SKIP
  #98      lsm_cgroup:SKIP
  Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED

Fixes: dca85aac ("selftests/bpf: lsm_cgroup functional test")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/bpf/20220630224203.512815-1-sdf@google.com

For example, /sys/fs/bpf/maps.debug is a BPF link. When you run `bpftool map show`
to show it:

Before:

  $ bpftool map show pinned /sys/fs/bpf/maps.debug
  Error: incorrect object type: unknown

After:

  $ bpftool map show pinned /sys/fs/bpf/maps.debug
  Error: incorrect object type: link
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220629154832.56986-5-laoar.shao@gmail.com

Currently, xsk_socket__delete frees BPF resources regardless of ctx
refcount. Xdpxceiver has a test to verify whether underlying BPF
resources would not be wiped out after closing XSK socket that was
bound to interface with other active sockets. From library's xsk part
perspective it also means that the internal xsk context is shared and
its refcount is bumped accordingly.

After a switch to loading XDP prog based on previously opened XSK
socket, mentioned xdpxceiver test fails with:

  not ok 16 [xdpxceiver.c:swap_xsk_resources:1334]: ERROR: 9/"Bad file descriptor

which means that in swap_xsk_resources(), xsk_socket__delete() released
xskmap which in turn caused a failure of xsk_socket__update_xskmap().

To fix this, when deleting socket, decrement ctx refcount before
releasing BPF resources and do so only when refcount dropped to 0 which
means there are no more active sockets for this ctx so BPF resources can
be freed safely.

Fixes: 2f6324a3 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-5-maciej.fijalkowski@intel.com

To prevent the case we had previously where for TEST_MODE_SKB, XDP prog
was attached in native mode, call bpf_xdp_query() after loading prog and
make sure that attach_mode is as expected.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-4-maciej.fijalkowski@intel.com

Currently, xsk_setup_xdp_prog() uses anonymous xsk_socket struct which
means that during xsk_create_bpf_link() call, xsk->config.xdp_flags is
always 0. This in turn means that from xdpxceiver it is impossible to
use xdpgeneric attachment, so since commit 3b22523b ("selftests,
xsk: Fix bpf_res cleanup test") we were not testing SKB mode at all.

To fix this, introduce a function, called xsk_setup_xdp_prog_xsk(), that
will load XDP prog based on the existing xsk_socket, so that xsk
context's refcount is correctly bumped and flags from application side
are respected. Use this from xdpxceiver side so we get coverage of
generic and native XDP program attach points.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-3-maciej.fijalkowski@intel.com

Currently bpf_link probe is done for each call of xsk_socket__create().
For cases where xsk context was previously created and current socket
creation uses it, has_bpf_link will be overwritten, where it has already
been initialized.

Optimize this by moving the query to the xsk_create_ctx() so that when
xsk_get_ctx() finds a ctx then no further bpf_link probes are needed.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220629143458.934337-2-maciej.fijalkowski@intel.com

Now that bpftool is able to produce a list of known program, map, attach
types, let's use as much of this as we can in the bash completion file,
so that we don't have to expand the list each time a new type is added
to the kernel.

Also update the relevant test script to remove some checks that are no
longer needed.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220629203637.138944-3-quentin@isovalent.com

Add a "bpftool feature list" subcommand to list BPF "features".
Contrarily to "bpftool feature probe", this is not about the features
available on the system. Instead, it lists all features known to bpftool
from compilation time; in other words, all program, map, attach, link
types known to the libbpf version in use, and all helpers found in the
UAPI BPF header.

The first use case for this feature is bash completion: running the
command provides a list of types that can be used to produce the list of
candidate map types, for example.

Now that bpftool uses "standard" names provided by libbpf for the
program, map, link, and attach types, having the ability to list these
types and helpers could also be useful in scripts to loop over existing
items.

Sample output:

    # bpftool feature list prog_types | grep -vw unspec | head -n 6
    socket_filter
    kprobe
    sched_cls
    sched_act
    tracepoint
    xdp

    # bpftool -p feature list map_types | jq '.[1]'
    "hash"

    # bpftool feature list attach_types | grep '^cgroup_'
    cgroup_inet_ingress
    cgroup_inet_egress
    [...]
    cgroup_inet_sock_release

    # bpftool feature list helpers | grep -vw bpf_unspec | wc -l
    207

The "unspec" types and helpers are not filtered out by bpftool, so as to
remain closer to the enums, and to preserve the indices in the JSON
arrays (e.g. "hash" at index 1 == BPF_MAP_TYPE_HASH in map types list).
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/bpf/20220629203637.138944-2-quentin@isovalent.com

The attach_type_name definition was removed in commit 1ba5ad36
("bpftool: Use libbpf_bpf_attach_type_str"). Remove its forward
declaration in main.h as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220630093638.25916-1-tklauser@distanz.ch

Bpftool used to bump the memlock rlimit to make sure to be able to load
BPF objects. After the kernel has switched to memcg-based memory
accounting [0] in 5.11, bpftool has relied on libbpf to probe the system
for memcg-based accounting support and for raising the rlimit if
necessary [1]. But this was later reverted, because the probe would
sometimes fail, resulting in bpftool not being able to load all required
objects [2].

Here we add a more efficient probe, in bpftool itself. We first lower
the rlimit to 0, then we attempt to load a BPF object (and finally reset
the rlimit): if the load succeeds, then memcg-based memory accounting is
supported.

This approach was earlier proposed for the probe in libbpf itself [3],
but given that the library may be used in multithreaded applications,
the probe could have undesirable consequences if one thread attempts to
lock kernel memory while memlock rlimit is at 0. Since bpftool is
single-threaded and the rlimit is process-based, this is fine to do in
bpftool itself.

This probe was inspired by the similar one from the cilium/ebpf Go
library [4].

  [0] commit 97306be4 ("Merge branch 'switch to memcg-based memory accounting'")
  [1] commit a777e18f ("bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK")
  [2] commit 6b4384ff ("Revert "bpftool: Use libbpf 1.0 API mode instead of RLIMIT_MEMLOCK"")
  [3] https://lore.kernel.org/bpf/20220609143614.97837-1-quentin@isovalent.com/t/#u
  [4] https://github.com/cilium/ebpf/blob/v0.9.0/rlimit/rlimit.go#L39Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20220629111351.47699-1-quentin@isovalent.com

Stanislav Fomichev says:

====================

This series implements new lsm flavor for attaching per-cgroup programs to
existing lsm hooks. The cgroup is taken out of 'current', unless
the first argument of the hook is 'struct socket'. In this case,
the cgroup association is taken out of socket. The attachment
looks like a regular per-cgroup attachment: we add new BPF_LSM_CGROUP
attach type which, together with attach_btf_id, signals per-cgroup lsm.
Behind the scenes, we allocate trampoline shim program and
attach to lsm. This program looks up cgroup from current/socket
and runs cgroup's effective prog array. The rest of the per-cgroup BPF
stays the same: hierarchy, local storage, retval conventions
(return 1 == success).

Current limitations:
* haven't considered sleepable bpf; can be extended later on
* not sure the verifier does the right thing with null checks;
  see latest selftest for details
* total of 10 (global) per-cgroup LSM attach points

v11:
- Martin: address selftest memory & fd leaks
- Martin: address moving into root (instead have another temp leaf cgroup)
- Martin: move tools/include/uapi/linux/bpf.h change from libbpf patch
  into 'sync tools' patch

v10:
- Martin: reword commit message, drop outdated items
- Martin: remove rcu_real_lock from __cgroup_bpf_run_lsm_current
- Martin: remove CONFIG_BPF_LSM from cgroup_bpf_release
- Martin: fix leaking shim reference in bpf_cgroup_link_release
- Martin: WARN_ON_ONCE for bpf_trampoline_lookup in bpf_trampoline_unlink_cgroup_shim
- Martin: sync tools/include/linux/btf_ids.h
- Martin: move progs/flags closer to the places where they are used in __cgroup_bpf_query
- Martin: remove sk_clone_security & sctp_bind_connect from bpf_lsm_locked_sockopt_hooks
- Martin: try to determine vmlinux btf_id in bpftool
- Martin: update tools header in a separate commit
- Quentin: do libbpf_find_kernel_btf from the ops that need it
- lkp@intel.com: another build failure

v9:
Major change since last version is the switch to bpf_setsockopt to
change the socket state instead of letting the progs poke socket directly.
This, in turn, highlights the challenge that we need to care about whether
the socket is locked or not when we call bpf_setsockopt. (with my original
example selftest, the hooks are running early in the init phase for this
not to matter).

For now, I've added two btf id lists:
* hooks where we know the socket is locked and it's safe to call bpf_setsockopt
* hooks where we know the socket is _not_ locked, but the hook works on
  the socket that's not yet exposed to userspace so it should be safe
  (for this mode, special new set of bpf_{s,g}etsockopt helpers
   is added; they don't have sock_owned_by_me check)

Going forward, for the rest of the hooks, this might be a good motivation
to expand lsm cgroup to support sleeping bpf and allow the callers to
lock/unlock sockets or have a new bpf_setsockopt variant that does the
locking.

- ifdef around cleanup in cgroup_bpf_release
- Andrii: a few nits in libbpf patches
- Martin: remove unused btf_id_set_index
- Martin: bring back refcnt for cgroup_atype
- Martin: make __cgroup_bpf_query a bit more readable
- Martin: expose dst_prog->aux->attach_btf as attach_btf_obj_id as well
- Martin: reorg check_return_code path for BPF_LSM_CGROUP
- Martin: return directly from check_helper_call (instead of goto err)
- Martin: add note to new warning in check_return_code, print only for void hooks
- Martin: remove confusing shim reuse
- Martin: use bpf_{s,g}etsockopt instead of poking into socket data
- Martin: use CONFIG_CGROUP_BPF in bpf_prog_alloc_no_stats/bpf_prog_free_deferred

v8:
- CI: fix compile issue
- CI: fix broken bpf_cookie
- Yonghong: remove __bpf_trampoline_unlink_prog comment
- Yonghong: move cgroup_atype around to fill the gap
- Yonghong: make bpf_lsm_find_cgroup_shim void
- Yonghong: rename regs to args
- Yonghong: remove if(current) check
- Martin: move refcnt into bpf_link
- Martin: move shim management to bpf_link ops
- Martin: use cgroup_atype for shim only
- Martin: go back to arrays for managing cgroup_atype(s)
- Martin: export bpf_obj_id(aux->attach_btf)
- Andrii: reorder SEC_DEF("lsm_cgroup+")
- Andrii: OPTS_SET instead of OPTS_HAS
- Andrii: rename attach_btf_func_id
- Andrii: move into 1.0 map

v7:
- there were a lot of comments last time, hope I didn't forget anything,
  some of the bigger ones:
  - Martin: use/extend BTF_SOCK_TYPE_SOCKET
  - Martin: expose bpf_set_retval
  - Martin: reject 'return 0' at the verifier for 'void' hooks
  - Martin: prog_query returns all BPF_LSM_CGROUP, prog_info
    returns attach_btf_func_id
  - Andrii: split libbpf changes
  - Andrii: add field access test to test_progs, not test_verifier (still
    using asm though)
- things that I haven't addressed, stating them here explicitly, let
  me know if some of these are still problematic:
  1. Andrii: exposing only link-based api: seems like the changes
     to support non-link-based ones are minimal, couple of lines,
     so seems like it worth having it?
  2. Alexei: applying cgroup_atype for all cgroup hooks, not only
     cgroup lsm: looks a bit harder to apply everywhere that I
     originally thought; with lsm cgroup, we have a shim_prog pointer where
     we store cgroup_atype; for non-lsm programs, we don't have a
     trace program where to store it, so we still need some kind
     of global table to map from "static" hook to "dynamic" slot.
     So I'm dropping this "can be easily extended" clause from the
     description for now. I have converted this whole machinery
     to an RCU-managed list to remove synchronize_rcu().
- also note that I had to introduce new bpf_shim_tramp_link and
  moved refcnt there; we need something to manage new bpf_tramp_link

v6:
- remove active count & stats for shim program (Martin KaFai Lau)
- remove NULL/error check for btf_vmlinux (Martin)
- don't check cgroup_atype in bpf_cgroup_lsm_shim_release (Martin)
- use old_prog (instead of passed one) in __cgroup_bpf_detach (Martin)
- make sure attach_btf_id is the same in __cgroup_bpf_replace (Martin)
- enable cgroup local storage and test it (Martin)
- properly implement prog query and add bpftool & tests (Martin)
- prohibit non-shared cgroup storage mode for BPF_LSM_CGROUP (Martin)

v5:
- __cgroup_bpf_run_lsm_socket remove NULL sock/sk checks (Martin KaFai Lau)
- __cgroup_bpf_run_lsm_{socket,current} s/prog/shim_prog/ (Martin)
- make sure bpf_lsm_find_cgroup_shim works for hooks without args (Martin)
- __cgroup_bpf_attach make sure attach_btf_id is the same when replacing (Martin)
- call bpf_cgroup_lsm_shim_release only for LSM_CGROUP (Martin)
- drop BPF_LSM_CGROUP from bpf_attach_type_to_tramp (Martin)
- drop jited check from cgroup_shim_find (Martin)
- new patch to convert cgroup_bpf to hlist_node (Jakub Sitnicki)
- new shim flavor for 'struct sock' + list of exceptions (Martin)

v4:
- fix build when jit is on but syscall is off

v3:
- add BPF_LSM_CGROUP to bpftool
- use simple int instead of refcnt_t (to avoid use-after-free
  false positive)

v2:
- addressed build bot failures
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Functional test that exercises the following:

1. apply default sk_priority policy
2. permit TX-only AF_PACKET socket
3. cgroup attach/detach/replace
4. reusing trampoline shim
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-12-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

$ bpftool --nomount prog loadall $KDIR/tools/testing/selftests/bpf/lsm_cgroup.o /sys/fs/bpf/x
$ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_alloc
$ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_bind
$ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_clone
$ bpftool cgroup attach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create
$ bpftool cgroup tree
CgroupPath
ID       AttachType      AttachFlags     Name
/sys/fs/cgroup
6        lsm_cgroup                      socket_post_create bpf_lsm_socket_post_create
8        lsm_cgroup                      socket_bind     bpf_lsm_socket_bind
10       lsm_cgroup                      socket_alloc    bpf_lsm_sk_alloc_security
11       lsm_cgroup                      socket_clone    bpf_lsm_inet_csk_clone

$ bpftool cgroup detach /sys/fs/cgroup lsm_cgroup pinned /sys/fs/bpf/x/socket_post_create
$ bpftool cgroup tree
CgroupPath
ID       AttachType      AttachFlags     Name
/sys/fs/cgroup
8        lsm_cgroup                      socket_bind     bpf_lsm_socket_bind
10       lsm_cgroup                      socket_alloc    bpf_lsm_sk_alloc_security
11       lsm_cgroup                      socket_clone    bpf_lsm_inet_csk_clone
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-11-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Implement bpf_prog_query_opts as a more expendable version of
bpf_prog_query. Expose new prog_attach_flags and attach_btf_func_id as
well:

* prog_attach_flags is a per-program attach_type; relevant only for
  lsm cgroup program which might have different attach_flags
  per attach_btf_id
* attach_btf_func_id is a new field expose for prog_query which
  specifies real btf function id for lsm cgroup attachments
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-10-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

lsm_cgroup/ is the prefix for BPF_LSM_CGROUP.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-9-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Has been slowly getting out of sync, let's update it.

resolve_btfids usage has been updated to match the header changes.

Also bring new parts of tools/include/uapi/linux/bpf.h.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-8-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I don't see how to make it nice without introducing btf id lists
for the hooks where these helpers are allowed. Some LSM hooks
work on the locked sockets, some are triggering early and
don't grab any locks, so have two lists for now:

1. LSM hooks which trigger under socket lock - minority of the hooks,
   but ideal case for us, we can expose existing BTF-based helpers
2. LSM hooks which trigger without socket lock, but they trigger
   early in the socket creation path where it should be safe to
   do setsockopt without any locks
3. The rest are prohibited. I'm thinking that this use-case might
   be a good gateway to sleeping lsm cgroup hooks in the future.
   We can either expose lock/unlock operations (and add tracking
   to the verifier) or have another set of bpf_setsockopt
   wrapper that grab the locks and might sleep.
Reviewed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220628174314.1216643-7-sdf@google.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>