- 01 Nov, 2023 20 commits
-
-
Shawn.Shao authored
Fix the wrong drivers_autoprobe path name in the document Signed-off-by:
Shawn.Shao <shawn.shao@jaguarmicro.com> Message-Id: <20230821011535.1117-1-shawn.shao@jaguarmicro.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com>
-
Dragos Tatulea authored
As Eli Cohen moved to other work, I'll be the contact point for mlx5_vdpa. Acked-by:
Dragos Tatulea <dtatulea@nvidia.com> Message-Id: <20230925160654.1558627-1-dtatulea@nvidia.com> Signed-off-by:
-
Xueshi Hu authored
After commit 68f2736a ("mm: Convert all PageMovable users to movable_operations"), the execution path has been changed to move_to_new_folio movable_operations->migrate_page balloon_page_migrate balloon_page_migrate->balloon_page_migrate balloon_page_migrate Correct the outdated comment. Signed-off-by:
Xueshi Hu <xueshi.hu@smartx.com> Message-Id: <20230813140709.835536-1-xueshi.hu@smartx.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com>
-
Eugenio Pérez authored
Offer this backend feature as mlx5 is compatible with it. It allows it to do live migration with CVQ, dynamically switching between passthrough and shadow virtqueue. Signed-off-by:
Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230703142514.363256-1-eperezma@redhat.com> Signed-off-by:
-
Dragos Tatulea authored
For the following sequence: - cvq group is in ASID 0 - .set_map(1, cvq_iotlb) - .set_group_asid(cvq_group, 1) ... the cvq mapping from ASID 0 will be used. This is not always correct behaviour. This patch adds support for the above mentioned flow by saving the iotlb on each .set_map and updating the cvq iotlb with it on a cvq group change. Acked-by:
Si-Wei Liu <si-wei.liu@oracle.com> Tested-by:
Lei Yang <leiyang@redhat.com>
-
Dragos Tatulea authored
They will be used in a follow-up patch. For dup_iotlb, avoid the src == dst case. This is an error. Acked-by:
-
Dragos Tatulea authored
Vq descriptor mappings are supported in hardware by filling in an additional mkey which contains the descriptor mappings to the hw vq. A previous patch in this series added support for hw mkey (mr) creation for ASID 1. This patch fills in both the vq data and vq descriptor mkeys based on group ASID mapping. The feature is signaled to the vdpa core through the presence of the .get_vq_desc_group op. Acked-by:
-
Dragos Tatulea authored
Introduce the vq descriptor group and mr per ASID. Until now .set_map on ASID 1 was only updating the cvq iotlb. From now on it also creates a mkey for it. The current patch doesn't use it but follow-up patches will add hardware support for mapping the vq descriptors. Acked-by:
-
Dragos Tatulea authored
The current flow for updating an mr works directly on mvdev->mr which makes it cumbersome to handle multiple new mr structs. This patch makes the flow more straightforward by having mlx5_vdpa_create_mr return a new mr which will update the old mr (if any). The old mr will be deleted and unlinked from mvdev. For the case when the iotlb is empty (not NULL), the old mr will be cleared. This change paves the way for adding mrs for different ASIDs. The initialized bool is no longer needed as mr is now a pointer in the mlx5_vdpa_dev struct which will be NULL when not initialized. Acked-by:
-
Dragos Tatulea authored
The mutex is named like it is supposed to protect only the mkey but in reality it is a global lock for all mr resources. Shift the mutex to it's rightful location (struct mlx5_vdpa_dev) and give it a more appropriate name. Signed-off-by:
-
Dragos Tatulea authored
This patch adapts the mr creation/deletion code to be able to work with any given mr struct pointer. All the APIs are adapted to take an extra parameter for the mr. mlx5_vdpa_create/delete_mr doesn't need a ASID parameter anymore. The check is done in the caller instead (mlx5_set_map). This change is needed for a followup patch which will introduce an additional mr for the vq descriptor data. Signed-off-by:
-
Dragos Tatulea authored
Make mlx5_destroy_mr symmetric to mlx5_create_mr. Acked-by:
-
Dragos Tatulea authored
Now that the cvq code is out of mlx5_vdpa_create/destroy_mr, the "dvq" functions can be folded into their callers. Having "dvq" in the naming will no longer be accurate in the downstream patches. Acked-by:
-
Dragos Tatulea authored
The reslock is taken while refresh is called but iommu_lock is more specific to this resource. So take the iommu_lock during cvq iotlb refresh. Based on Eugenio's patch [0]. [0] https://lore.kernel.org/lkml/20230112142218.725622-4-eperezma@redhat.com/Acked-by:
-
Dragos Tatulea authored
The handling of the cvq iotlb is currently coupled with the creation and destruction of the hardware mkeys (mr). This patch moves cvq iotlb handling into its own function and shifts it to a scope that is not related to mr handling. As cvq handling is just a prune_iotlb + dup_iotlb cycle, put it all in the same "update" function. Finally, the destruction path is handled by directly pruning the iotlb. After this move is done the ASID mr code can be collapsed into a single function. Acked-by:
-
Dragos Tatulea authored
Necessary for upcoming cvq separation from mr allocation. Acked-by:
-
Si-Wei Liu authored
With _F_DESC_ASID backend feature, the device can now support the VHOST_VDPA_GET_VRING_DESC_GROUP ioctl, and it may expose the descriptor table (including avail and used ring) in a different group than the buffers it contains. This new uAPI will fetch the group ID of the descriptor table. Signed-off-by:
-
Si-Wei Liu authored
Userspace knows if the device has dedicated descriptor group or not by checking this feature bit. It's only exposed if the vdpa driver backend implements the .get_vq_desc_group() operation callback. Userspace trying to negotiate this feature when it or the dependent _F_IOTLB_ASID feature hasn't been exposed will result in an error. Signed-off-by:
-
Si-Wei Liu authored
In some cases, the access to the virtqueue's descriptor area, device and driver areas (precluding indirect descriptor table in guest memory) may have to be confined to a different address space than where its buffers reside. Without loss of simplicity and generality with already established terminology, let's fold up these 3 areas and call them as a whole as descriptor table group, or descriptor group for short. Specifically, in case of split virtqueues, descriptor group consists of regions for Descriptor Table, Available Ring and Used Ring; for packed virtqueues layout, descriptor group contains Descriptor Ring, Driver and Device Event Suppression structures. The group ID for a dedicated descriptor group can be obtained through a new .get_vq_desc_group() op. If driver implements this op, it means that the descriptor, device and driver areas of the virtqueue may reside in a dedicated group than where its buffers reside, a.k.a the default virtqueue group through the .get_vq_group() op. In principle, the descriptor group may or may not have same group ID as the default group. Even if the descriptor group has a different ID, meaning the vq's descriptor group areas can optionally move to a separate address space than where guest memory resides, the descriptor group may still start from a default address space, same as where its buffers reside. To move the descriptor group to a different address space, .set_group_asid() has to be called to change the ASID binding for the group, which is no different than what needs to be done on any other virtqueue group. On the other hand, the .reset() semantics also applies on descriptor table group, meaning the device reset will clear all ASID bindings and move all virtqueue groups including descriptor group back to the default address space, i.e. in ASID 0. QEMU's shadow virtqueue is going to utilize dedicated descriptor group to speed up map and unmap operations, yielding tremendous downtime reduction by avoiding the full and slow remap cycle in SVQ switching. Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux.gitMichael S. Tsirkin authored
This merges a single commit that contains changes to mlx5_ifc.h It's required to support vq descriptor mappings in mlx5/vdpa Signed-off-by:
-
- 30 Oct, 2023 1 commit
-
-
Linus Torvalds authored
-
- 28 Oct, 2023 15 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 fixes from Ingo Molnar: - Fix a possible CPU hotplug deadlock bug caused by the new TSC synchronization code - Fix a legacy PIC discovery bug that results in device troubles on affected systems, such as non-working keybards, etc - Add a new Intel CPU model number to <asm/intel-family.h> * tag 'x86-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc: Defer marking TSC unstable to a worker x86/i8259: Skip probing when ACPI/MADT advertises PCAT compatibility x86/cpu: Add model number for Intel Arrow Lake mobile processor
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Ingo Molnar: "Restore unintentionally lost quirk settings in the GIC irqchip driver, which broke certain devices" * tag 'irq-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Don't override quirk settings with default values
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf event fix from Ingo Molnar: "Fix a potential NULL dereference bug" * tag 'perf-urgent-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix potential NULL deref
-
Linus Torvalds authored
Merge tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull probes fixes from Masami Hiramatsu: - tracing/kprobes: Fix kernel-doc warnings for the variable length arguments - tracing/kprobes: Fix to count the symbols in modules even if the module name is not specified so that user can probe the symbols in the modules without module name * tag 'probes-fixes-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing/kprobes: Fix symbol counting logic by looking at modules as well tracing/kprobes: Fix the description of variable length arguments
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fix from Christoph Hellwig: - reduce the initialy dynamic swiotlb size to remove an annoying but harmless warning from the page allocator (Petr Tesarik) * tag 'dma-mapping-6.6-2023-10-28' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: do not try to allocate a TLB bigger than MAX_ORDER pages
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some very small driver fixes for 6.6-final that have shown up in the past two weeks. Included in here are: - tiny fastrpc bugfixes for reported errors - nvmem register fixes - iio driver fixes for some reported problems - fpga test fix - MAINTAINERS file update for fpga All of these have been in linux-next this week with no reported problems" * tag 'char-misc-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: fpga: Fix memory leak for fpga_region_test_class_find() fpga: m10bmc-sec: Change contact for secure update driver fpga: disable KUnit test suites when module support is enabled iio: afe: rescale: Accept only offset channels nvmem: imx: correct nregs for i.MX6ULL nvmem: imx: correct nregs for i.MX6UL nvmem: imx: correct nregs for i.MX6SLL misc: fastrpc: Unmap only if buffer is unmapped from DSP misc: fastrpc: Clean buffers on remote invocation failures misc: fastrpc: Free DMA handles for RPC calls with no arguments misc: fastrpc: Reset metadata buffer to avoid incorrect free iio: exynos-adc: request second interupt only when touchscreen mode is used iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds dt-bindings: iio: add missing reset-gpios constrain
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "Bugfixes for Axxia when it is a target and for PEC handling of stm32f7. Plus, fix an OF node leak pattern in the mux subsystem" * tag 'i2c-for-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: stm32f7: Fix PEC handling in case of SMBUS transfers i2c: muxes: i2c-mux-gpmux: Use of_get_i2c_adapter_by_node() i2c: muxes: i2c-demux-pinctrl: Use of_get_i2c_adapter_by_node() i2c: muxes: i2c-mux-pinctrl: Use of_get_i2c_adapter_by_node() i2c: aspeed: Fix i2c bus hang in slave read
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Three fixes, one for the clk framework and two for clk drivers: - Avoid an oops in possible_parent_show() by checking for no parent properly when a DT index based lookup is used - Handle errors returned from divider_ro_round_rate() in clk_stm32_composite_determine_rate() - Fix clk_ops::determine_rate() implementation of socfpga's gateclk_ops that was ruining uart output because the divider was forgotten about" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: stm32: Fix a signedness issue in clk_stm32_composite_determine_rate() clk: Sanitize possible_parent_show to Handle Return Value of of_clk_get_parent_name clk: socfpga: gate: Account for the divider in determine_rate -
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc filesystem fixes from Al Viro: "Assorted fixes all over the place: literally nothing in common, could have been three separate pull requests. All are simple regression fixes, but not for anything from this cycle" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ceph_wait_on_conflict_unlink(): grab reference before dropping ->d_lock io_uring: kiocb_done() should *not* trust ->ki_pos if ->{read,write}_iter() failed sparc32: fix a braino in fault handling in csum_and_copy_..._user()
-
Andrii Nakryiko authored
Recent changes to count number of matching symbols when creating a kprobe event failed to take into account kernel modules. As such, it breaks kprobes on kernel module symbols, by assuming there is no match. Fix this my calling module_kallsyms_on_each_symbol() in addition to kallsyms_on_each_match_symbol() to perform a proper counting. Link: https://lore.kernel.org/all/20231027233126.2073148-1-andrii@kernel.org/ Cc: Francis Laniel <flaniel@linux.microsoft.com> Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Fixes: b022f0c7 ("tracing/kprobes: Return EADDRNOTAVAIL when func matches several symbols") Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Song Liu <song@kernel.org> Signed-off-by:
Masami Hiramatsu (Google) <mhiramat@kernel.org>
-
Al Viro authored
Use of dget() after we'd dropped ->d_lock is too late - dentry might be gone by that point. Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
->ki_pos value is unreliable in such cases. For an obvious example, consider O_DSYNC write - we feed the data to page cache and start IO, then we make sure it's completed. Update of ->ki_pos is dealt with by the first part; failure in the second ends up with negative value returned _and_ ->ki_pos left advanced as if sync had been successful. In the same situation write(2) does not advance the file position at all. Reviewed-by:
Christian Brauner <brauner@kernel.org> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Fix for an issue reported where reading fdinfo could find a NULL thread as we didn't properly synchronize, and then a disable for the IOCB_DIO_CALLER_COMP optimization as a recent reported highlighted how that could lead to deadlocks if the task issued async O_DIRECT writes and then proceeded to do sync fallocate() calls" * tag 'io_uring-6.6-2023-10-27' of git://git.kernel.dk/linux: io_uring/rw: disable IOCB_DIO_CALLER_COMP io_uring/fdinfo: lock SQ thread while retrieving thread cpu/pid
-
Al Viro authored
Fault handler used to make non-trivial calls, so it needed to set a stack frame up. Used to be save ... - grab a stack frame, old %o... become %i... .... ret - go back to address originally in %o7, currently %i7 restore - switch to previous stack frame, in delay slot Non-trivial calls had been gone since ab5e8b33 and that code should have become retl - go back to address in %o7 clr %o0 - have return value set to 0 What it had become instead was ret - go back to address in %i7 - return address of *caller* clr %o0 - have return value set to 0 which is not good, to put it mildly - we forcibly return 0 from csum_and_copy_{from,to}_iter() (which is what the call of that thing had been inlined into) and do that without dropping the stack frame of said csum_and_copy_..._iter(). Confuses the hell out of the caller of csum_and_copy_..._iter(), obviously... Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Fixes: ab5e8b33 "sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()" Signed-off-by:
-
git://git.kernel.dk/linuxLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for a potential divide-by-zero, introduced in this cycle" * tag 'block-6.6-2023-10-27' of git://git.kernel.dk/linux: blk-throttle: check for overflow in calculate_bytes_allowed
-
- 27 Oct, 2023 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ATA fix from Damien Le Moal: "A single patch to fix a regression introduced by the recent suspend/resume fixes. The regression is that ATA disks are not stopped on system shutdown, which is not recommended and increases the disks SMART counters for unclean power off events. This patch fixes this by refining the recent rework of the scsi device manage_xxx flags" * tag 'ata-6.6-final' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: scsi: sd: Introduce manage_shutdown device flag
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fix from Hans de Goede: "A single patch to extend the AMD PMC driver DMI quirk list for laptops which need special handling to avoid NVME s2idle suspend/resume errors" * tag 'platform-drivers-x86-v6.6-6' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: Add s2idle quirk for more Lenovo laptops
-
Thomas Gleixner authored
Tetsuo reported the following lockdep splat when the TSC synchronization fails during CPU hotplug: tsc: Marking TSC unstable due to check_tsc_sync_source failed WARNING: inconsistent lock state inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. ffffffff8cfa1c78 (watchdog_lock){?.-.}-{2:2}, at: clocksource_watchdog+0x23/0x5a0 {IN-HARDIRQ-W} state was registered at: _raw_spin_lock_irqsave+0x3f/0x60 clocksource_mark_unstable+0x1b/0x90 mark_tsc_unstable+0x41/0x50 check_tsc_sync_source+0x14f/0x180 sysvec_call_function_single+0x69/0x90 Possible unsafe locking scenario: lock(watchdog_lock); <Interrupt> lock(watchdog_lock); stack backtrace: _raw_spin_lock+0x30/0x40 clocksource_watchdog+0x23/0x5a0 run_timer_softirq+0x2a/0x50 sysvec_apic_timer_interrupt+0x6e/0x90 The reason is the recent conversion of the TSC synchronization function during CPU hotplug on the control CPU to a SMP function call. In case that the synchronization with the upcoming CPU fails, the TSC has to be marked unstable via clocksource_mark_unstable(). clocksource_mark_unstable() acquires 'watchdog_lock', but that lock is taken with interrupts enabled in the watchdog timer callback to minimize interrupt disabled time. That's obviously a possible deadlock scenario, Before that change the synchronization function was invoked in thread context so this could not happen. As it is not crucical whether the unstable marking happens slightly delayed, defer the call to a worker thread which avoids the lock context problem. Fixes: 9d349d47 ("x86/smpboot: Make TSC synchronization function call based") Reported-by:Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Thomas Gleixner authored
David and a few others reported that on certain newer systems some legacy interrupts fail to work correctly. Debugging revealed that the BIOS of these systems leaves the legacy PIC in uninitialized state which makes the PIC detection fail and the kernel switches to a dummy implementation. Unfortunately this fallback causes quite some code to fail as it depends on checks for the number of legacy PIC interrupts or the availability of the real PIC. In theory there is no reason to use the PIC on any modern system when IO/APIC is available, but the dependencies on the related checks cannot be resolved trivially and on short notice. This needs lots of analysis and rework. The PIC detection has been added to avoid quirky checks and force selection of the dummy implementation all over the place, especially in VM guest scenarios. So it's not an option to revert the relevant commit as that would break a lot of other scenarios. One solution would be to try to initialize the PIC on detection fail and retry the detection, but that puts the burden on everything which does not have a PIC. Fortunately the ACPI/MADT table header has a flag field, which advertises in bit 0 that the system is PCAT compatible, which means it has a legacy 8259 PIC. Evaluate that bit and if set avoid the detection routine and keep the real PIC installed, which then gets initialized (for nothing) and makes the rest of the code with all the dependencies work again. Fixes: e179f691 ("x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately") Reported-by:
David Lazar <dlazar@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Cc: stable@vger.kernel.org Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218003 Link: https://lore.kernel.org/r/875y2u5s8g.ffs@tglx
-
