- 16 Oct, 2023 34 commits
-
-
Geert Uytterhoeven authored
When the device is unbound from the driver, the display may be active. Make sure it gets shut down. Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/ddf2736459d59d0e961f240e77da7b0a28caae15.1694767209.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
The DRM core vblank handling mechanism requires drivers to forcefully turn vblank reporting off when disabling the CRTC, and to restore the vblank reporting status when enabling the CRTC. Implement this using the drm_crtc_vblank_{on,off}() helpers. Note that drm_crtc_vblank_off() must be called at startup to synchronize the state of the vblank core code with the hardware, which is initially disabled. This is performed at CRTC creation time, requiring vertical blank initialization to be moved before creating CRTCs. Reviewed-by: -
Geert Uytterhoeven authored
Turning a CRTC off will prevent a queued page flip from ever completing, potentially confusing userspace. Wait for queued page flips to complete before turning the CRTC off to avoid this. Reviewed-by:
-
Geert Uytterhoeven authored
Move the shmob_drm_crtc_finish_page_flip() function up, to avoid having to move it during the modification in the next change. Reviewed-by:
-
Geert Uytterhoeven authored
Replace the call to the legacy drm_handle_vblank() function with a call to the new drm_crtc_handle_vblank() helper. Reviewed-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
-
Geert Uytterhoeven authored
Rename the "plane" member of the shmob_drm_plane subclass structure to "base", to improve readability. Reviewed-by:
-
Geert Uytterhoeven authored
Rename the "connector" member of the shmob_drm_connector subclass structure to "base", to improve readability. Reviewed-by:
-
Geert Uytterhoeven authored
Rename the "crtc" member of the shmob_drm_crtc subclass structure to "base", to improve readability. Reviewed-by:
-
Geert Uytterhoeven authored
Unify primary and overlay plane allocation: - Enhance shmob_drm_plane_create() so it can be used to create the primary plane, too, - Move overlay plane creation next to primary plane creation. Signed-off-by: -
Geert Uytterhoeven authored
Move legacy interface handling to the connector setup code. Set up bus_flags and bus_formats in display_info according to the bus format and panel information from platform data, to make it more similar with DT-based connector/bridge/panel setup. This will allow us to use the same LCD interface setup code for both legacy and DT-based systems. Signed-off-by:
-
Geert Uytterhoeven authored
Replace the custom shmob_drm_interface enumeration values with standard media bus formats. This simplifies driver handling of bus formats and prepares for DT support. Signed-off-by:
-
Laurent Pinchart authored
Replace the drm_mode_modeinfo field with videomode that includes more signal polarity flags. This simplifies driver handling of panel modes and prepares for DT support. Signed-off-by:
-
Geert Uytterhoeven authored
Now that drm_device is embedded in shmob_drm_device, we can use a container_of()-based helper to get the shmob_drm_device pointer from the drm_device, instead of using the deprecated drm_device.dev_private field. While at it, restore reverse Xmas tree ordering of local variable declarations. Reviewed-by:
-
Geert Uytterhoeven authored
Replace to conversion helper macros using container_of() by static inline functions, to improve type-safety. Reviewed-by:
-
Geert Uytterhoeven authored
Embedding drm_device in shmob_drm_device allows us to use the DRM managed API to allocate both structures in one go, simplifying error handling. Reviewed-by:
-
Geert Uytterhoeven authored
According to the comments for drm_universal_plane_init(), the plane structure should not be allocated with devm_kzalloc(). Fix lifetime issues by using drmm_universal_plane_alloc() instead. Signed-off-by:
-
Geert Uytterhoeven authored
There is no need to call drm_plane_force_disable() from the plane's .destroy() callback, as the plane should have been disabled already before. See also commit 3c858a33 ("drm/plane_helper: don't disable plane in destroy function") for the generic plane helper case. After removing this call, shmob_drm_plane_destroy() becomes a simple wrapper around shmob_drm_plane_destroy(), hence replace it by the latter. Signed-off-by:
-
Geert Uytterhoeven authored
Convert to managed IRQ handling, to simplify cleanup. Reviewed-by:
-
Geert Uytterhoeven authored
Prepare for DT conversion, where panel probe can be deferred, by streamlining error propagation and handling: - Use dev_err_probe() to avoid printing error messages in case of probe deferral, - Propagate errors where needed. Reviewed-by: -
Laurent Pinchart authored
SYS panels are not used, and have no defined DT bindings. Remove their support to avoid impeding DT support. It can always be added back later. Signed-off-by:
-
Laurent Pinchart authored
Prepare for DT bindings by using more appropriate names for the input clocks. Note that all LDDCKR_ICKSEL_* definitions but the one for the bus clock are valid only for SH7724, so the clock selection code needs to be updated when extending clock support to other SoCs. Signed-off-by:
-
Laurent Pinchart authored
The display info width_mm and height_mm fields are set at init time and never overwritten, don't set them a second time when getting modes. Signed-off-by:
-
Laurent Pinchart authored
Backlight support should be implemented by panels, not by the LCDC driver. As the feature is currently unused anyway, remove it. Signed-off-by:
-
Geert Uytterhoeven authored
Improve the table containing hardware information related to the supported plane formats: 1. Move (part of) the overlay format register settings from multiple switch() statements spread across the code into the table, like is already done for the primary plane register settings, 2. Remove the .yuv field, as that information can easily be extracted from the register settings using a new helper macro, 3. Shrink and move the .bpp field to reduce table size. Reviewed-by: -
Geert Uytterhoeven authored
The primary plane supports various YCbCr formats, and the CRTC code already knows how to handle them. Enable support for the missing formats by adding them to the table of supported modes. Reviewed-by:
-
Geert Uytterhoeven authored
Replace the last printing of an hexadecimal fourcc format code by a pretty-printed format name, using the "%p4cc" format specifier. Reviewed-by:
-
Geert Uytterhoeven authored
Commit 56550d94 ("Drivers: gpu: remove __dev* attributes.") forgot to realign the continuation of the parameter section of shmob_drm_setup_clocks(). Reviewed-by:
-
Geert Uytterhoeven authored
The SH-Mobile LCD Controller is part of a PM Domain on all relevant SoCs (clock domain on all, power domain on some). Hence it may not be sufficient to manage the LCDC module clock explicitly (e.g. if the selected clock source differs from SHMOB_DRM_CLK_BUS). Fix this by using Runtime PM for all clock handling. Add an explicit dependency on CONFIG_PM, which should already be met on all affected platforms. Signed-off-by:
-
Geert Uytterhoeven authored
The first encoder output on the SH-Mobile LCD Controller is a DPI parallel bus. However, at the time of introduction of the driver, no encoder or connector types were defined yet for the DPI parallel bus, hence the driver used the ones for LVDS instead. Adjust the types accordingly. Reviewed-by:
-
Geert Uytterhoeven authored
When configuring a CHn Source Image Format Register (LDBBSIFR), one should use the corresponding LDBBSIFR_RPKF_* definition for overlay planes, not the DDFR_PKF_* definition for the primary plane. Fortunately both definitions resolve to the same value, so this bug did not cause any harm. Reviewed-by:
-
Geert Uytterhoeven authored
Merely writing zero to the CHn Source Image Format Register is not sufficient to disable a plane, as the programmed register value is not propagated immediately to the current side. This can be seen when using the -P option of modetest: the extra plane is displayed correctly, but does not disappear after exit. Fix this by doing the full update dance using the Blend Control Register, like is done when enabling the plane. Reviewed-by:
-
Geert Uytterhoeven authored
Add the RGB666 9:9 format MEDIA_BUS_FMT_RGB666_2X9_BE, which is supported by the SH-Mobile LCD Controller. Reviewed-by:
-
Geert Uytterhoeven authored
Add device tree bindings for the LCD Controller (LCDC) found in Renesas SuperH SH-Mobile and ARM SH/R-Mobile SOCs. Based on a plain text prototype by Laurent Pinchart. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
Split off DRM drivers for Renesas SH-Mobile into its own entry, and add Geert Uytterhoeven as a maintainer. Signed-off-by:
-
- 04 Oct, 2023 1 commit
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
drm/i915 feature pull for v6.7: Features and functionality: - Early Xe2 LPD / Lunarlake (LNL) display enabling (Lucas, Matt, Gustavo, Stanislav, Luca, Clint, Juha-Pekka, Balasubramani, Ravi) - Plenty of various DSC improvements and fixes (Ankit) - Add DSC PPS state readout and verification (Suraj) - Improve fastsets for VRR, LRR and M/N updates (Ville) - Use connector->ddc to create (non-DP MST) connector sysfs ddc symlinks (Ville) - Various DSB improvements, load LUTs using DSB (Ville) - Improve shared link bandwidth management, starting with FDI (Imre) - Optimize get param ioctl for PXP status (Alan) - Remove DG2 pre-production hardware workarounds (Matt) - Add more RPL P/U PCI IDs (Dnyaneshwar) - Add new DG2-G12 stepping (Swati) - Add PSR sink error status to debugfs (Jouni) - Add DP enhanced framing to crtc state checker (Ville) Refactoring and cleanups: - Simplify TileY/Tile4 tiling selftest enumeration (Matt) - Remove some unused power domain code (Gustavo) - Check stepping of display IP version rather than MTL platform (Matt) - DP audio compute config cleanups (Vinod) - SDVO cleanups and refactoring, more robust failure handling (Ville) - Color register definition and readout cleanups (Jani) - Reduce header interdependencies for frontbuffer tracking (Jani) - Continue replacing struct edid with struct drm_edid (Jani) - Use source physical address instead of EDID for CEC (Jani) - Clean up Type-C port lane count functions (Luca) - Clean up DSC PPS register definitions and readout (Jani) - Stop using GEM_BUG_ON()/GEM_WARN_ON() in display code (Jani) - Move more of the display probe to display code (Jani) - Remove redundant runtime suspended state flag (Jouni) - Move display info printing to display code (Balasubramani) - Frontbuffer tracking improvements (Jouni) - Add trailing newlines to debug logging (Jim Cromie) - Separate display workarounds from clock gating init (Matt) - Reduce dmesg log spamming for combo PHY, PLL state, FEC, DP MST (Ville, Imre) Fixes: - Fix hotplug poll detect loops via suspend/resume (Imre) - Fix hotplug detect for forced connectors (Imre) - Fix DSC first_line_bpg_offset calculation (Suraj) - Fix debug prints for SDP CRC16 (Arun) - Fix PXP runtime resume (Alan) - Fix cx0 PHY lane handling (Gustavo) - Fix frontbuffer tracking locking in debugfs (Juha-Pekka) - Fix SDVO detect on some models (Ville) - Fix SDP split configuration for DP MST (Vinod) - Fix AUX usage and reads for HDCP on DP MST (Suraj) - Fix PSR workaround (Jouni) - Fix redundant AUX power get/put in DP force (Imre) - Fix ICL DSI TCLK POST by letting hardware handle it (William) - Fix IRQ reset for XE LP+ (Gustavo) - Fix h/vsync_end instead of h/vtotal in VBT (Ville) - Fix C20 PHY msgbus timeout issues (Gustavo) - Fix pre-TGL FEC pipe A vs. DDI A mixup (Ville) - Fix FEC state readout for DP MST (Ville) DRM subsystem core changes: - Assume sink supports 8 bpc when DSC is supported (Ankit) - Add drm_edid_is_digital() helper (Jani) - Parse source physical address from EDID (Jani) - Add function to attach CEC without EDID (Jani) - Reorder connector sysfs/debugfs remove (Ville) - Register connector sysfs ddc symlink later (Ville) Media subsystem changes: - Add comments about CEC source physical address usage (Jani) Merges: - Backmerge drm-next to get v6.6-rc1 (Jani) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/i915_drv.h From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/87r0mhi7a6.fsf@intel.com
-
- 02 Oct, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-09-28' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: Fixes/improvements/new stuff: - Fix TLB-Invalidation seqno store [mtl] (Alan Previn) - Force a reset on internal GuC error [guc] (John Harrison) - Define GSC fw [gsc] (Daniele Ceraolo Spurio) - Update workaround 14016712196 [dg2/mtl] (Tejas Upadhyay) - Mark requests for GuC virtual engines to avoid use-after-free (Andrzej Hajda) - Add Wa_14015150844 [dg2/mtl] (Shekhar Chauhan) - Prevent error pointer dereference (Dan Carpenter) - Add Wa_18022495364 [tgl,adl,rpl] (Dnyaneshwar Bhadane) - Fix GuC PMU by moving execlist stats initialization to execlist specific setup (Umesh Nerlige Ramappa) - Fix PXP firmware load [pxp/mtl] (Alan Previn) - Fix execution/context state of PXP contexts (Alan Previn) - Limit the length of an sg list to the requested length (Matthew Wilcox) - Fix reservation address in ggtt_reserve_guc_top [guc] (Javier Pello) - Add Wa_18028616096 [dg2] (Shekhar Chauhan) - Get runtime pm in busyness worker only if already active [guc/pmu] (Umesh Nerlige Ramappa) - Don't set PIPE_CONTROL_FLUSH_L3 for aux inval (Nirmoy Das) Future platform enablement: - Fix and consolidate some workaround checks, make others IP version based [mtl] (Matt Roper) - Replace Meteorlake subplatforms with IP version checks (Matt Roper) - Adding DeviceID for Arrowlake-S under MTL [mtl] (Nemesa Garg) - Run relevant bits of debugfs drop_caches per GT (Tvrtko Ursulin) Miscellaneous: - Remove Wa_15010599737 [dg2] (Shekhar Chauhan) - Align igt_spinner_create_request with hangcheck [selftests] (Jonathan Cavitt) - Remove pre-production workarounds [dg2] (Matt Roper) - Tidy some workaround definitions (Matt Roper) - Wait longer for tasks in migrate selftest [gt] (Jonathan Cavitt) - Skip WA verification for GEN7_MISCCPCTL on DG2 [gt] (Andrzej Hajda) - Silence injected failure in the load via GSC path [huc] (Daniele Ceraolo Spurio) - Refactor deprecated strncpy (Justin Stitt) - Update RC6 mask for mtl_drpc [debugfs/mtl] (Badal Nilawar) - Remove a static inline that requires including i915_drv.h [gt] (Jani Nikula) - Remove inlines from i915_gem_execbuffer.c [gem] (Jani Nikula) - Remove gtt_offset from stream->oa_buffer.head/.tail [perf] (Ashutosh Dixit) - Do not disable preemption for resets (Tvrtko Ursulin) Signed-off-by:
-
- 29 Sep, 2023 2 commits
-
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jouni Högander authored
i915_gem_object_set_frontbuffer returns set frontbuffer pointer. When we are releasing frontbuffer we are clearing the pointer from the object. Warn on if return value is not null. v3: Check i915_gem_object_set_frontbuffer return value separately v2: Instead of ignoring do drm_WARN_ON Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Reviewed-by:
-
- 28 Sep, 2023 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v6.7-rc1: UAPI Changes: - drm_file owner is now updated during use, in the case of a drm fd opened by the display server for a client, the correct owner is displayed. - Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo recycling. Cross-subsystem Changes: - Disable boot logo for au1200fb, mmpfb and unexport logo helpers. Only fbcon should manage display of logo. - Update freescale in MAINTAINERS. - Add some bridge files to bridge in MAINTAINERS. - Update gma500 driver repo in MAINTAINERS to point to drm-misc. Core Changes: - Move size computations to drm buddy allocator. - Make drm_atomic_helper_shutdown(NULL) a nop. - Assorted small fixes in drm_debugfs, DP-MST payload addition error handling. - Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling. - Handle bad (h/v)sync_end in EDID by clipping to htotal. - Build GPUVM as a module. Driver Changes: - Simple drivers don't need to cache prepared result. - Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot more drm drivers. - Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic, nouveau, tc358768. - Add NV12 for komeda writeback. - Add arbitration lost event to synopsis/dw-hdmi-cec. - Speed up s/r in nouveau by not restoring some big bo's. - Assorted nouveau display rework in preparation for GSP-RM, especially related to how the modeset sequence works and the DP sequence in relation to link training. - Update anx7816 panel. - Support NVSYNC and NHSYNC in tegra. - Allow multiple power domains in simple driver. Signed-off-by:
-
Imre Deak authored
Recompute the state of all CRTCs on an FDI link during a modeset that may be affected by the modeset of other CRTCs on the same link. This ensures that each CRTC on the link maximizes its BW use (after another CRTC is disabled). In practice this means recomputing pipe B's config on IVB if pipe C gets disabled. v2: - Add the change recomputing affected CRTC states in a separate patch. (Ville) v3: (Ville) - Constify old and new crtc states. - Check for fused off pipe C. - Fix new vs. old crtc state mixup. - Drop check for pipe C's enabled state. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230921195159.2646027-12-imre.deak@intel.com
-
