Driver is using 'of_address_to_resource' to get memory resources.
Make use of 'platform_get_resource' instead which is more accurate
for a platform driver. This also makes possible to delete a local
variable which is not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a spelling mistake in an RT_TRACE message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are two spelling mistake in RT_TRACE messages. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`dt9812_detach()` is the Comedi "detach" handler for the dt9812 driver.
When it is called, the private data for the device is about to be freed.
The private data contains a mutex `devpriv->mut` that was initialized
when the private data was allocated.  Call `mutex_destroy()` to mark it
as invalid.

Also remove the calls to `mutex_lock()` and `mutex_unlock()` from
`dt9812_detach()` as the mutex is only being used around a call to
`usb_set_intfdata()` to clear the USB interface's driver data pointer.
The mutex lock seems redundant here, especially as it is about to be
destroyed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`ni6501_detach()` is the Comedi "detach" handler for the ni_usb6501
driver.  It is called when the private data for the device is about to
be freed.  The private data contains a mutex `devpriv->mut` that was
initialized when the private data was allocated.  Call `mutex_destroy()`
to mark it as invalid.

Also remove the calls to `mutex_lock()` and `mutex_unlock()` from
`ni6501_detach()`.  The only other locks of the mutex are by some of the
Comedi instruction handlers that cannot contend with the "detach"
handler for this mutex.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`usbdux_detach()` is the Comedi "detach" handler for the usbdux driver.
When it is called, the private data for the device is about to be freed.
The private date contains a mutex `devpriv->mut` that was initialized
when the private data was allocated.  Call `mutex_destroy()` to mark it
as invalid.

The calls to `mutex_lock()` and `mutex_unlock()` are probably not
required, especially as the mutex is about to be destroyed, but leave
them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`usbduxfast_detach()` is the Comedi "detach" handler for the usbduxfast
driver.  When it is called, the private data for the device is about to
be freed.  The private date contains a mutex `devpriv->mut` that was
initialized when the private data was allocated.  Call `mutex_destroy()`
to mark it as invalid.

The calls to `mutex_lock()` and `mutex_unlock()` in
`usbduxfast_detach()` are probably not required, especially as the mutex
is about to be destroyed, but leave them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`usbduxsigma_detach()` is the Comedi "detach" handler for the
usbduxsigma driver.  When it is called, the private data for the device
is about to be freed.  The private date contains a mutex `devpriv->mut`
that was initialized when the private data was allocated.  Call
`mutex_destroy()` to mark it as invalid.

The calls to `mutex_lock()` and `mutex_unlock()` in
`usbduxsigma_detach()` are probably not required, especially as the
mutex is about to be destroyed, but leave them alone for now.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warning:

drivers/staging/most/configfs.c:34:18: warning:
 symbol 'mdev_link_list' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are multiple spelling mistakes in variable names, fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The kzalloc here was being used without checking the return - if the
kzalloc fails return VCHIQ_ERROR. The call-site of
vchiq_platform_init_state() vchiq_init_state() was not responding
to an allocation failure so checks for != VCHIQ_SUCCESS
and pass VCHIQ_ERROR up to vchiq_platform_init() which then
will fail with -EINVAL.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-By: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are not a lot of functions in the core comedi module that require
the R/W semaphore `attach_lock` in `struct comedi_device` to be locked
(although there are a few functions that require at least one of
`attach_lock` and `mutex` to be locked).  One function that requires the
caller to lock `attach_lock` is `comedi_device_detach_cleanup()` so add
a call to `lockdep_assert_held()` to check and document that.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Lots of functions in the core comedi module expect the mutex in `struct
comedi_device` to be held, so add calls to `lockdep_assert_held()` to
check and document that.  An unusual case is the calls to
`lockdep_assert_held()` after successful return from
`comedi_alloc_board_minor()` which allocates a `struct comedi_device`
and returns with its mutex locked.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_auto_config()` uses `dev->class_dev` for logging a kernel
message after releasing `dev->mutex`.  There is an unlikely possibility
that the Comedi device `dev` will have been removed by the
`COMEDI_DEVCONFIG` ioctl() command.  Keep hold of the mutex until the
kernel message has been sent to prevent that.  The function can call
`comedi_release_hardware_device()` on error.  In that case, the mutex
must be unlocked before that.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

txq_add_mgmt_pkt allocates memory while being called from atomic context
so needs to use GFP_ATOMIC
Signed-off-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The "dyna_pci10xx" driver supports the Dynalog India PCI-1050.  There
seems to be very little online information available about this card,
but as far as I can tell[*], it only has 1 AO (analog output) channel,
not 16 AO channels as reported in the Comedi subdevice information.
Besides, the Comedi "insn_write" handler for the AO subdevice takes no
account of channel numbers.  Change the `n_chans` member of the AO
subdevice structure to 1 to reflect this.

[*] The card is no longer mentioned on the manufacturer's web-site and I
couldn't find any archived page for the site on archive.org.  I found
part of a scientific paper which describes the card as having a single
channel D/A converter:
<http://shodhganga.inflibnet.ac.in/bitstream/10603/150646/15/15_chapter%205.pdf>.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In the Comedi "attach" and "auto_attach" handlers that set up the Comedi
subdevices, there is no need to initialize the `len_chanlist` member of
Comedi subdevices that do not support Comedi asynchronous streaming
commands.  They can be left set to the initial zeroed out value and
the Comedi core will change the `len_chanlist` member to 1 afterwards in
that case.  The "dyna_pci10xx" driver currently sets the `len_chanlist`
members to the same value as the `n_chan` ("number of channels") member,
but this is unnecessary as none of them support asynchronous streaming.
Remove the initialization of `len_chanlist` from all the subdevices.
This will affect the information reported by the COMEDI_SUBDINFO ioctl
slightly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a TODO file which describes what needs to be done in order to
get the fieldbus_dev subsystem out of staging.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Anybus-S PROFINET IRT communication module provides instant integration
to any Ethernet based LAN via SMTP, FTP, HTTP as well as PROFINET and
Modbus-TCP. Additional protocols can be implemented on top of TCP/IP
or UDP using the transparent socket interface.

Official documentation:
https://www.anybus.com/docs/librariesprovider7/default-document-library
/manuals-design-guides/hms-hmsi-168-52.pdf

This implementation is an Anybus-S client driver, designed to be
instantiated by the Anybus-S bus driver when it discovers the Profinet
card.

If loaded successfully, the driver registers itself as a fieldbus_dev,
and userspace can access it through the fieldbus_dev interface.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arcx Inc. is an engineering company which provides advanced
embedded systems and consulting services.

Archronix is a technology design and product engineering firm
specializing in hardware control systems and enabling software.
Clients include OEM's in the transportation, aerospace,
medical and commercial sectors.

Websites:
	http://www.arcx.com/
	http://www.archronix.com/Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds devicetree binding documentation for the
Arcx anybus controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a driver for the Arcx anybus controller.

This device implements two Anybus-S hosts (buses),
and connects to the SoC via a parallel memory bus.
There is also a CAN power readout, unrelated to the Anybus,
modelled as a regulator.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Anybus-S/Anybus-M is a series of interchangeable fieldbus communication
modules featuring on board memory and processing power. All software and
hardware functionality required to communicate on the fieldbus is
incorporated in the module itself, allowing the application to focus on
other tasks.

Typical applications are frequency inverters, HMI and visualization
devices, instruments, scales, robotics, PLC’s and intelligent measuring
devices.

Official documentation:
https://www.anybus.com/docs/librariesprovider7/default-document-library/
manuals-design-guides/hms-hmsi-27-275.pdf
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fieldbus device (client) adapters allow data exchange with a PLC aka.
"Fieldbus Controller" over a fieldbus (Profinet, FLNet, etc.)

They are typically used when a Linux device wants to expose itself
as an actuator, motor, console light, switch, etc. over the fieldbus.

This framework is designed to provide a generic interface to Fieldbus
Devices from both the Linux Kernel and the userspace.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove an unused struct tx_pending_t, as it is never used in
kernel tree.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct ieee_param, as the struct that
has elements that can reasonably be directly accessed
should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct ieee_param_ex, as the struct that
has elements that can reasonably be directly accessed should
never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When setting output power level called, the power level should be
checked by power amplifier level register and high power option. There
was todo about it. Add some variables for checking power level range.
The values that used for checking high power or minimum power are from
rf69 datasheets. The maximum power level is always same regardless of
mode.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove an exceptional & on function names, otherwise they are used as
pointers without &.

Issue suggested using Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch warning "CHECK: Please don't use multiple blank lines"
on upc.h
Signed-off-by: Cesar Santos <dev.cmsantos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Do not use uninitialized variable 'port' when printing an error message
Signed-off-by: Antti Keränen <detegr@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

size = struct_size(instance, entry, count);

or

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)

Based on the above, replace gdma_dma_alloc_desc() with kzalloc() and
use the new struct_size() helper.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crc16_ccitt() function does "BIT(0) << i" instead of "BIT(i)".
Using !! is slightly shorter than "foo ? 1: 0" and remove unnecessary
parentheses to make the code simple.

Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function name is otherwise used as pointers without &.

Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/staging/rtlwifi/base.c: In function 'rtl_tx_agg_stop':
drivers/staging/rtlwifi/base.c:1733:23: warning:
 variable 'tid_data' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c: In function 'rtl_check_beacon_key':
drivers/staging/rtlwifi/base.c:2474:5: warning:
 variable 'ds_param_len' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c:2472:5: warning:
 variable 'ht_oper_len' set but not used [-Wunused-but-set-variable]

drivers/staging/rtlwifi/base.c:2470:5: warning:
 variable 'ht_cap_len' set but not used [-Wunused-but-set-variable]

They are never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a blank line after declarations.
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c564 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

  - The Xilinx AXI-Stream FIFO IP core driver description is elaborated.
  - References: Xilinx PG080 document, axis-fifo.txt
Signed-off-by: Moses Christopher <moseschristopherb@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove typedef in struct sdio_data and make the respective changes in
associated files, as the struct that has elements that can reasonably
be directly accessed should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpath error:
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Daniel Junho <djunho@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>