- 08 Oct, 2010 1 commit
-
-
Konrad Rzeszutek Wilk authored
We don't need a complex IOMMU dependency list on IA64 so we just define the IOMMU_* macro which is used the DMAR driver, as a dummy. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1286564028-2352-2-git-send-email-konrad.wilk@oracle.com> Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
- 31 Aug, 2010 1 commit
-
-
Konrad Rzeszutek Wilk authored
This boot crash was observed: DMA-API: preallocated 32768 debug entries DMA-API: debugging enabled by kernel config BUG: unable to handle kernel paging request at 19da8955 IP: [<f4ffffff>] 0xf4ffffff *pde = 00000000 The crux of the failure was that even if we did not use any of the .iommu_table section, the linker would still insert it in the vmlinux file. This patch fixes that and also fixes the runtime crash where we would try to access the array. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> LKML-Reference: <1283191802-25086-1-git-send-email-konrad.wilk@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
-
- 28 Aug, 2010 1 commit
-
-
Konrad Rzeszutek Wilk authored
Updating the linker section with comments about .iommu_table and some other ones that I know of. CC: Sam Ravnborg <sam@ravnborg.org> CC: H. Peter Anvin <hpa@zytor.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282933173-19960-1-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
-
- 26 Aug, 2010 10 commits
-
-
Konrad Rzeszutek Wilk authored
We remove all of the sub-platform detection/init routines and instead use on the .iommu_table array of structs to call the .early_init if .detect returned a positive value. Also we can stop detecting other IOMMUs if the IOMMU used the _FINISH type macro. During the 'pci_iommu_init' stage, we call .init for the second-stage initialization if it was defined. Currently only SWIOTLB has this defined and it used to de-allocate the SWIOTLB if the other detected IOMMUs have deemed it unnecessary to use SWIOTLB. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-11-git-send-email-konrad.wilk@oracle.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We utilize the IOMMU_INIT macros to create this dependency: [null] | [pci_xen_swiotlb_detect] | [pci_swiotlb_detect_override] | [pci_swiotlb_detect_4gb] | +-------+--------+---------------------+ / \ \ [detect_calgary] [gart_iommu_hole_init] [detect_intel_iommu] | [amd_iommu_detect] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-10-git-send-email-konrad.wilk@oracle.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: David Woodhouse <David.Woodhouse@intel.com> CC: Len Brown <len.brown@intel.com> CC: Chris Wright <chrisw@sous-sol.org> CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We utilize the IOMMU_INIT macros to create this dependency: [null] | [pci_xen_swiotlb_detect] | [pci_swiotlb_detect_override] | [pci_swiotlb_detect_4gb] | +-------+--------+ / \ [detect_calgary] [gart_iommu_hole_init] | [amd_iommu_detect] Meaning that 'amd_iommu_detect' will be called after 'gart_iommu_hole_init'. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-9-git-send-email-konrad.wilk@oracle.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> CC: Joerg Roedel <joerg.roedel@amd.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We utilize the IOMMU_INIT macros to create this dependency: [pci_xen_swiotlb_detect] | [pci_swiotlb_detect_override] | [pci_swiotlb_detect_4gb] | [detect_calgary] Meaning that 'detect_calgary' is going to be called after 'pci_swiotlb_detect'. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-8-git-send-email-konrad.wilk@oracle.com> CC: Muli Ben-Yehuda <muli@il.ibm.com> CC: "Jon D. Mason" <jdmason@kudzu.us> CC: "Darrick J. Wong" <djwong@us.ibm.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We utilize the IOMMU_INIT macros to create this dependency: [null] | [pci_xen_swiotlb_detect] | [pci_swiotlb_detect_override] | [pci_swiotlb_detect_4gb] In other words, we set 'pci_xen_swiotlb_detect' to be the first detection to be run during start. CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-7-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We utilize the IOMMU_INIT macros to create this dependency: [pci_xen_swiotlb_detect] | [pci_swiotlb_detect_override] | [pci_swiotlb_detect_4gb] And set the SWIOTLB IOMMU_INIT to utilize 'pci_swiotlb_init' for .init and 'pci_swiotlb_late_init' for .late_init. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-6-git-send-email-konrad.wilk@oracle.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
In 'pci_swiotlb_detect' we used to do two different things: a). If user provided 'iommu=soft' or 'swiotlb=force' we would set swiotlb=1 and return 1 (and forcing pci-dma.c to call pci_swiotlb_init() immediately). b). If 4GB or more would be detected and if user did not specify iommu=off, we would set 'swiotlb=1' and return whatever 'a)' figured out. We simplify this by splitting a) and b) in two different routines. CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-5-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We are using a very simple sort routine which sorts the .iommu_table array in the order of dependencies. Specifically each structure of iommu_table_entry has a field 'depend' which contains the function pointer to the IOMMU that MUST be run before us. We sort the array of structures so that the struct iommu_table_entry with no 'depend' field are first, and then the subsequent ones are the ones for which the 'depend' function has been already invoked (in other words, precede us). Using the kernel's version 'sort', which is a mergeheap is feasible, but would require making the comparison operator scan recursivly the array to satisfy the "heapify" process: setting the levels properly. The end result would much more complex than it should be an it is just much simpler to utilize this simple sort routine. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-4-git-send-email-konrad.wilk@oracle.com> CC: H. Peter Anvin <hpa@zytor.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
We return 1 if the IOMMU has been detected. Zero or an error number if we failed to find it. This is in preperation of using the IOMMU_INIT so that we can detect whether an IOMMU is present. I have not tested this for regression on Calgary, nor on AMD Vi chipsets as I don't have that hardware. CC: Muli Ben-Yehuda <muli@il.ibm.com> CC: "Jon D. Mason" <jdmason@kudzu.us> CC: "Darrick J. Wong" <djwong@us.ibm.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: David Woodhouse <David.Woodhouse@intel.com> CC: Chris Wright <chrisw@sous-sol.org> CC: Yinghai Lu <yinghai@kernel.org> CC: Joerg Roedel <joerg.roedel@amd.com> CC: H. Peter Anvin <hpa@zytor.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-3-git-send-email-konrad.wilk@oracle.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
Konrad Rzeszutek Wilk authored
This patch set adds a mechanism to "modularize" the IOMMUs we have on X86. Currently the count of IOMMUs is up to six and they have a complex relationship that requires careful execution order. 'pci_iommu_alloc' does that today, but most folks are unhappy with how it does it. This patch set addresses this and also paves a mechanism to jettison unused IOMMUs during run-time. For details that sparked this, please refer to: http://lkml.org/lkml/2010/8/2/282 The first solution that comes to mind is to convert wholesale the IOMMU detection routines to be called during initcall time frame. Unfortunately that misses the dependency relationship that some of the IOMMUs have (for example: for AMD-Vi IOMMU to work, GART detection MUST run first, and before all of that SWIOTLB MUST run). The second solution would be to introduce a registration call wherein the IOMMU would provide its detection/init routines and as well on what MUST run before it. That would work, except that the 'pci_iommu_alloc' which would run through this list, is called during mem_init. This means we don't have any memory allocator, and it is so early that we haven't yet started running through the initcall_t list. This solution borrows concepts from the 2nd idea and from how MODULE_INIT works. A macro is provided that each IOMMU uses to define it's detect function and early_init (before the memory allocate is active), and as well what other IOMMU MUST run before us. Since most IOMMUs depend on having SWIOTLB run first ("pci_swiotlb_detect") a convenience macro to depends on that is also provided. This macro is similar in design to MODULE_PARAM macro wherein we setup a .iommu_table section in which we populate it with the values that match a struct iommu_table_entry. During bootup we will sort through the array so that the IOMMUs that MUST run before us are first elements in the array. And then we just iterate through them calling the detection routine and if appropiate, the init routines. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <1282845485-8991-2-git-send-email-konrad.wilk@oracle.com> CC: H. Peter Anvin <hpa@zytor.com> CC: Fujita Tomonori <fujita.tomonori@lab.ntt.co.jp> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
-
- 23 Aug, 2010 1 commit
-
-
Linus Torvalds authored
-
- 22 Aug, 2010 12 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: PIT: free irq source id in handling error path KVM: destroy workqueue on kvm_create_pit() failures KVM: fix poison overwritten caused by using wrong xstate size
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits) drm/i915,intel_agp: Add support for Sandybridge D0 drm/i915: fix render pipe control notify on sandybridge agp/intel: set 40-bit dma mask on Sandybridge drm/i915: Remove the conflicting BUG_ON() drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/ drm/i915/suspend: Flush register writes before busy-waiting. i915: disable DAC on Ironlake also when doing CRT load detection. drm/i915: wait for actual vblank, not just 20ms drm/i915: make sure eDP PLL is enabled at the right time drm/i915: fix VGA plane disable for Ironlake+ drm/i915: eDP mode set sequence corrections drm/i915: add panel reset workaround drm/i915: Enable RC6 on Ironlake. drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode. drm/i915: Set up a render context on Ironlake drm/i915 invalidate indirect state pointers at end of ring exec drm/i915: Wake-up wait_request() from elapsed hang-check (v2) drm/i915: Apply i830 errata for cursor alignment drm/i915: Only update i845/i865 CURBASE when disabled (v2) drm/i915: FBC is updated within set_base() so remove second call in mode_set() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slab: fix object alignment slub: add missing __percpu markup in mm/slub_def.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: wait for discard to finish
-
Zhenyu Wang authored
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
This one is missed in last pipe control fix for sandybridge, that really unmask interrupt bit for notify in render engine IMR. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Zhenyu Wang authored
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
We now attempt to free "active" objects following a GPU hang as either the GPU will be reset or the hang is permenant. In either case, the GPU writes will not be flushed to main memory and it should be safe to return that memory back to the system. The BUG_ON(active) is thus overkill and can erroneously fire after a EIO. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
For the shared paths on the next generation chipsets. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Chris Wilson authored
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Dave Airlie authored
Like on Sandybridge, disabling the DAC here when doing CRT load detect avoids forever hangs waiting on the hardware. test procedure on HP 2740p: boot with no VGA plugged in, start X, plug in VGA monitor (1280x1024) chvt 3 machine hangs waiting forever. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Eric Anholt <eric@anholt.net>
-
Jesse Barnes authored
Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
-
- 21 Aug, 2010 6 commits
-
-
Arjan van de Ven authored
With the introduction of the new unified work queue thread pools, we lost one feature: It's no longer possible to know which worker is causing the CPU to wake out of idle. The result is that PowerTOP now reports a lot of "kworker/a:b" instead of more readable results. This patch adds a pair of tracepoints to the new workqueue code, similar in style to the timer/hrtimer tracepoints. With this pair of tracepoints, the next PowerTOP can correctly report which work item caused the wakeup (and how long it took): Interrupt (43) i915 time 3.51ms wakeups 141 Work ieee80211_iface_work time 0.81ms wakeups 29 Work do_dbs_timer time 0.55ms wakeups 24 Process Xorg time 21.36ms wakeups 4 Timer sched_rt_period_timer time 0.01ms wakeups 1 Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/mtd-2.6Linus Torvalds authored
* git://git.infradead.org/mtd-2.6: mtd: nand: Fix probe of Samsung NAND chips mtd: nand: Fix regression in BBM detection pxa3xx: fix ns2cycle equation
-
Samuel Thibault authored
The "Configure" word tends to make user believe they have to say 'yes' to be able to choose the number of procs/nodes. "Enable" should be unambiguous enough. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Like the mlock() change previously, this makes the stack guard check code use vma->vm_prev to see what the mapping below the current stack is, rather than have to look it up with find_vma(). Also, accept an abutting stack segment, since that happens naturally if you split the stack with mlock or mprotect. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
If we've split the stack vma, only the lowest one has the guard page. Now that we have a doubly linked list of vma's, checking this is trivial. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
It's a really simple list, and several of the users want to go backwards in it to find the previous vma. So rather than have to look up the previous entry with 'find_vma_prev()' or something similar, just make it doubly linked instead. Tested-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 20 Aug, 2010 8 commits
-
-
Tilman Sauerbeck authored
Apparently, the check for a 6-byte ID string introduced by commit 426c457a ("mtd: nand: extend NAND flash detection to new MLC chips") is NOT sufficient to determine whether or not a Samsung chip uses their new MLC detection scheme or the old, standard scheme. This adds a condition to check cell type. Signed-off-by: Tilman Sauerbeck <tilman@code-monkey.de> Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Fix apic=debug boot crash x86, hotplug: Serialize CPU hotplug to avoid bringup concurrency issues x86-32: Fix dummy trampoline-related inline stubs x86-32: Separate 1:1 pagetables from swapper_pg_dir x86, cpu: Fix regression in AMD errata checking code
-
Stephen Rothwell authored
This list moved to lists.ozlabs.org quite some time ago. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Rothwell authored
All these lists moved to lists.ozlabs.org quite a while ago. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Stefan Richter authored
Chapter 6 is right about mutex_trylock, but chapter 10 wasn't. This error was introduced during semaphore-to-mutex conversion of the Unreliable guide. :-) If user context which performs mutex_lock() or mutex_trylock() is preempted by interrupt context which performs mutex_trylock() on the same mutex instance, a deadlock occurs. This is because these functions do not disable local IRQs when they operate on mutex->wait_lock. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
gcc-4.0.2: drivers/scsi/qla4xxx/ql4_os.c: In function 'qla4_8xxx_error_recovery': drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2377: sorry, unimplemented: called from here drivers/scsi/qla4xxx/ql4_glbl.h:135: sorry, unimplemented: inlining failed in call to 'qla4_8xxx_set_drv_active': function body not available drivers/scsi/qla4xxx/ql4_os.c:2393: sorry, unimplemented: called from here Cc: Ravi Anand <ravi.anand@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Miklos Szeredi authored
Fix uml compile error: include/linux/dma-mapping.h:145: error: redefinition of 'dma_get_cache_alignment' arch/um/include/asm/dma-mapping.h:99: note: previous definition of 'dma_get_cache_alignment' was here Introduced by commit 4565f017 ("dma-mapping: unify dma_get_cache_alignment implementations") Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Cc: Jeff Dike <jdike@addtoit.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
dump_tasks() needs to hold the RCU read lock around its access of the target task's UID. To this end it should use task_uid() as it only needs that one thing from the creds. The fact that dump_tasks() holds tasklist_lock is insufficient to prevent the target process replacing its credentials on another CPU. Then, this patch change to call rcu_read_lock() explicitly. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- mm/oom_kill.c:410 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 1 4 locks held by kworker/1:2/651: #0: (events){+.+.+.}, at: [<ffffffff8106aae7>] process_one_work+0x137/0x4a0 #1: (moom_work){+.+...}, at: [<ffffffff8106aae7>] process_one_work+0x137/0x4a0 #2: (tasklist_lock){.+.+..}, at: [<ffffffff810fafd4>] out_of_memory+0x164/0x3f0 #3: (&(&p->alloc_lock)->rlock){+.+...}, at: [<ffffffff810fa48e>] find_lock_task_mm+0x2e/0x70 Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-