Support offloading of TC rules that mirror/redirect egress traffic to a
MACVLAN device, which is attached to mlx5 representor net device.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In switchdev mode we insert steering rules to eswitch that
make sure packets can't be looped back.
Modify the self tests infra and have flags per test.
Add a flag for tests that needs to be skipped in switchdev mode.

Before this commit:

$ ethtool --test enp8s0f0
 The test result is FAIL
 The test extra info:
 Link Test        0
 Speed Test       0
 Health Test      0
 Loopback Test    1

After this commit:

$ ethtool --test enp8s0f0
 The test result is PASS
 The test extra info:
 Link Test        0
 Speed Test       0
 Health Test      0

Example output in dmesg:

enp8s0f0: Self test begin..
enp8s0f0:         [0] Link Test start..
enp8s0f0:         [0] Link Test end: result(0)
enp8s0f0:         [1] Speed Test start..
enp8s0f0:         [1] Speed Test end: result(0)
enp8s0f0:         [2] Health Test start..
enp8s0f0:         [2] Health Test end: result(0)
enp8s0f0: Self test out: status flags(0x1)
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This to be consistent and adds the module name to the error message.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Instead of having sparse ifdefs in source files use a single
ifdef in the tc sample header file and use stubs.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The priv argument is not being used. remove it.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The driver should add offloaded rules with either a fwd or drop action.
The check existed in parsing fdb flows but not when parsing nic flows.
Move the test into actions_match_supported() which is called for
checking nic flows and fdb flows.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Do it when parsing like in other actions instead of when
checking if goto is supported in current scenario.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

A user is expected to explicit request a fwd or drop action.
It is not correct to implicit add a fwd action for the user,
when modify header action flag exists.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

modify_header_match_supported() should return type bool but
it returns the value returned by is_action_keys_supported()
which is type int.

is_action_keys_supported() always returns either -EOPNOTSUPP
or 0 and it shouldn't change as the purpose of the function
is checking for support. so just make the function return
a bool type.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Prior to this patch, ethtool -X fail but the user receives a success
status. Try to roll-back when failing and return success status
accordingly.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Directly using _usecs_to_jiffies() might be unsafe, so it's
better to use usecs_to_jiffies() instead.
Because we can see that the result of _usecs_to_jiffies()
could be larger than MAX_JIFFY_OFFSET values without the
check of the input.

Fixes: c410bf01 ("Fix the excessive initial retransmission timeout")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to track CE marks per rate sample (one round trip), TCP needs a
per-skb header field to record the tp->delivered_ce count when the skb
was sent. To make space, we replace the "last_in_flight" field which is
used exclusively for NV congestion control. The stat needed by NV can be
alternatively approximated by existing stats tcp_sock delivered and
mss_cache.

This patch counts the number of packets delivered which have CE marks in
the rate sample, using similar approach of delivery accounting.

Cc: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Luke Hsiao <lukehsiao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An extraneous number was added during the inclusion of that change,
correct that such that we use a single bit as is expected by the PHY
driver.
Reported-by: Justin Chen <justinpopo6@gmail.com>
Fixes: d6da08ed ("net: phy: broadcom: Add IDDQ-SR mode")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Leon Romanovsky says:

====================
Batch of devlink related fixes

I'm asking to apply this batch of devlink fixes to net-next and not to
net, because most if not all fixes are for old code or/and can be considered
as cleanup.

It will cancel the need to deal with merge conflicts for my next devlink series :).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.

Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.

Fixes: 755f982b ("qed/qede: make devlink survive recovery")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PF pointer is always valid when PCI core calls its .shutdown() and
.remove() callbacks. There is no need to check it again.

Fixes: 837f08fd ("ice: Add basic driver framework for Intel(R) E800 Series")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need in extra one line functions to call relevant
functions only once.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no in-kernel users for the devlink port parameters API,
so let's remove it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This driver doesn't have any port parameters and registers
devlink port parameters with empty table. Remove the useless
calls to devlink_port_params_register and _unregister.

Fixes: da203dfa ("Revert "devlink: Add a generic wake_on_lan port parameter"")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.

Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.

Fixes: 4ab0c6a8 ("bnxt_en: add support to enable VF-representors")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hrtimer_forward_now() is providing the same functionality. Preparation for
making hrtimer_forward() timer core code only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: netdev@vger.kernel.org
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Intel Corporation <linuxwwan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since both forms are accepted, let's search for both when we
pre-validate the PHY modes.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Add support for IP-in-IP with IPv6 underlay

Currently, mlxsw only supports IP-in-IP with IPv4 underlay. Traffic
routed through 'gre' netdevs is encapsulated with IPv4 and GRE headers.
Similarly, incoming IPv4 GRE packets are decapsulated and routed in the
overlay VRF (which can be the same as the underlay VRF).

This patchset adds support for IPv6 underlay using the 'ip6gre' netdev.
Due to architectural differences between Spectrum-1 and later ASICs,
this functionality is only supported on Spectrum-2 onwards (the software
data path is used for Spectrum-1).

Patchset overview:

Patches #1-#5 are preparations.

Patches #6-#9 add and extend required device registers.

Patches #10-#14 gradually add IPv6 underlay support.

A follow-up patchset will add net/forwarding/ selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, mlxsw driver supports IP-in-IP only with IPv4 underlay.
Add support for IPv6 underlay for Spectrum-2 and above.

Most of the configurations are same to IPv4, the main difference between
IPv4 and IPv6 is related to saving IP addresses.
IPv6 addresses are saved as part of KVD and the relevant registers hold
pointer to them.
Add API for that as part of ipip_ops, so then only Spectrum-2 and above
will save IPv6 addresses in this way.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Spectrum ASIC has a configurable limit on how deep into the packet
it parses. By default, the limit is 96 bytes.

For IP-in-IP packets, with IPv6 outer and inner headers, the default
parsing depth is not enough and without increasing it such packets cannot
be properly decapsulated.

Use the existing API to set parsing depth, call it once for each
decapsulation entry when it is created/destroyed.
There is no need to protect the code with new mutex because 'router->lock'
is already taken in these code paths.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for allocating and freeing KVD entries for IPv6 addresses.

These addresses are programmed by the RIPS register and referenced by
the RATR and RTDP registers for IPv6 underlay encapsulation and
decapsulation, respectively.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add operations for IP-in-IP GRE6. For now the function can_offload()
returns false and the other functions warn as they should never be called.

A later patch will add dedicated operations for Spectrum-2 which will
support IPv6 underlay, so use 'mlxsw_sp1_' prefix for the new operations.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, there is support for IP-in-IP only with IPv4 underlay for all
supported Spectrum ASICs.
The next patches will add support for IPv6 underlay only for Spectrum-2
and above.

Add infrastructure for splitting IP-in-IP support between different
ASICs - create separate ipip_ops_arr and add ipips_init function to set the
right ops.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RITR register is used to configure the router interface table.

For IP-in-IP, it stores the underlay source IP address for encapsulation
and also the ingress RIF for the underlay lookup.

Add support for IPv6 IP-in-IP configuration.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RATR register is used to configure the Router Adjacency (next-hop)
Table.

For IP-in-IP entry, underlay destination IPv4 is saved as part of this
register and underlay destination IPv6 is saved by RIPS register and RATR
saves pointer to it.

Add function for setting IPv6 IP-in-IP configuration.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RTDP register is used for configuring the tunnel decapsulation
properties of NVE and IP-in-IP.

Linux tunnels verify packets before decapsulation based on the packet's
source IP, which must match tunnel remote IP.
RTDP is used to configure decapsulation so that it filters out packets that
are not IPv6 or have the wrong source IP or wrong GRE key.

For IP-in-IP entry, source IPv4 is saved as part of this register and
source IPv6 is saved by RIPS register and RTDP saves pointer to it.

Create common function for configuring both IPv4 and IPv6 and add
dedicated functions for each protocol.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The RIPS register is used to store IPv6 addresses for use by the NVE and
IP-in-IP.

For IPv6 underlay support, RATR register needs to hold a pointer to the
remote IPv6 address for encapsulation and RTDP register needs to hold a
pointer to the local IPv6 address for decapsulation check.

Add the required register for saving IPv6 addresses.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function __mlxsw_sp_ipip_netdev_ul_dev_get() returns the underlay
device that corresponds to the overlay device that it gets.
Currently, this function assumes that the tunnel is IPv4 GRE, because it
is the only one that is supported by mlxsw driver.

This assumption will no longer be correct when IPv6 GRE support is added,
resulting in wrong underlay device being returned.
Instead, check 'ol_dev->type' and return the underlay device accordingly.

Move the function to spectrum_ipip.c because spectrum_router.c should not
be aware to tunnel type.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function mlxsw_sp_ipip_ol_netdev_change_gre4() contains code that
can be shared between IPv4 and IPv6.
The only difference is the way that arguments are taken from tunnel
parameters, which are different between IPv4 and IPv6.

For that, add structure 'mlxsw_sp_ipip_parms' to hold all the required
parameters for the function and save it as part of
'struct mlxsw_sp_ipip_entry' instead of the existing structure that is
not shared between IPv4 and IPv6. Add new operation as part of
'mlxsw_sp_ipip_ops' to initialize the new structure.

Then mlxsw_sp_ipip_ol_netdev_change_gre{4,6}() will prepare the new
structure and both will call the same function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppress the following checkpatch.pl check [1] by adding a variable to
store the IP-in-IP options. Noticed while adding equivalent IPv6 code in
subsequent patches.

[1]
CHECK: Alignment should match open parenthesis
+               mlxsw_reg_ritr_loopback_ipip4_pack(ritr_pl, lb_cf.lb_ipipt,
+
+ MLXSW_REG_RITR_LOOPBACK_IPIP_OPTIONS_GRE_KEY_PRESET,
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, there are several functions that handle 'struct ip_tunnel_parm'
and 'struct __ip6_tnl_parm'.

Change the mentioned functions to get IP tunnel parameters by reference
and as 'const'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw_sp_fib4_entry_type_unset() is not specific for IPv4 FIB entry,
move the code to mlxsw_sp_fib_entry_type_unset(), and call this function
from mlxsw_sp_fib4_entry_type_unset() so then it will be used for IPv6
also.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mptcp/protocol.c
  977d293e ("mptcp: ensure tx skbs always have the MPTCP ext")
  efe686ff ("mptcp: ensure tx skbs always have the MPTCP ext")

same patch merged in both trees, keep net-next.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>