The current code does not check sk->sk_shutdown & RCV_SHUTDOWN.
tls_sw_recvmsg may return a positive value in the case where bytes have
already been copied when the socket is shutdown. sk->sk_err has been
cleared, causing the tls_wait_data to hang forever on a subsequent
invocation. Checking sk->sk_shutdown & RCV_SHUTDOWN, as in tcp_recvmsg,
fixes this problem.

Fixes: c46234eb ("tls: RX path for ktls")
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: Doron Roberts-Kedes <doronrk@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuchung Cheng says:

====================
fix DCTCP ECE Ack series

This patch set address that the existing DCTCP implementation does not
fully implement the ACK policy specified in the RFC. This improves
the responsiveness of CE status change particularly on flows with
small inflight.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change
has to be sent immediately so the sender can respond quickly:

""" When receiving packets, the CE codepoint MUST be processed as follows:

   1.  If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to
       true and send an immediate ACK.

   2.  If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE
       to false and send an immediate ACK.
"""

Previously DCTCP implementation may continue to delay the ACK. This
patch fixes that to implement the RFC by forcing an immediate ACK.

Tested with this packetdrill script provided by Larry Brakmo

0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0

0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7>
0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8>
0.110 < [ect0] . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
   +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0

0.200 < [ect0] . 1:1001(1000) ack 1 win 257
0.200 > [ect01] . 1:1(0) ack 1001

0.200 write(4, ..., 1) = 1
0.200 > [ect01] P. 1:2(1) ack 1001

0.200 < [ect0] . 1001:2001(1000) ack 2 win 257
+0.005 < [ce] . 2001:3001(1000) ack 2 win 257

+0.000 > [ect01] . 2:2(0) ack 2001
// Previously the ACK below would be delayed by 40ms
+0.000 > [ect01] E. 2:2(0) ack 3001

+0.500 < F. 9501:9501(0) ack 4 win 257
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently when a DCTCP receiver delays an ACK and receive a
data packet with a different CE mark from the previous one's, it
sends two immediate ACKs acking previous and latest sequences
respectly (for ECN accounting).

Previously sending the first ACK may mark off the delayed ACK timer
(tcp_event_ack_sent). This may subsequently prevent sending the
second ACK to acknowledge the latest sequence (tcp_ack_snd_check).
The culprit is that tcp_send_ack() assumes it always acknowleges
the latest sequence, which is not true for the first special ACK.

The fix is to not make the assumption in tcp_send_ack and check the
actual ack sequence before cancelling the delayed ACK. Further it's
safer to pass the ack sequence number as a local variable into
tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid
future bugs like this.
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor and create helpers to send the special ACK in DCTCP.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The calculation of "wqe_size" is not correct when the tx queue is busy in
hinic_xmit_frame().

When there are no free WQEs, the tx flow will unmap the skb buffer, then
ring the doobell for the pending packets. But the "wqe_size" which used
to calculate the doorbell address is not correct. The wqe size should be
cleared to 0, otherwise, it will cause a doorbell error.

This patch fixes the problem.
Reported-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the warning below by calling the ptr_ring_consume_bh,
which uses spin_[un]lock_bh.

[  179.064300] ================================
[  179.069073] WARNING: inconsistent lock state
[  179.073846] 4.18.0-rc2+ #18 Not tainted
[  179.078133] --------------------------------
[  179.082907] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[  179.089637] swapper/21/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
[  179.095478] 00000000963d1995 (&(&r->consumer_lock)->rlock){+.?.}, at:
__page_pool_empty_ring+0x61/0x100
[  179.105988] {SOFTIRQ-ON-W} state was registered at:
[  179.111443]   _raw_spin_lock+0x35/0x50
[  179.115634]   __page_pool_empty_ring+0x61/0x100
[  179.120699]   page_pool_destroy+0x32/0x50
[  179.125204]   mlx5e_free_rq+0x38/0xc0 [mlx5_core]
[  179.130471]   mlx5e_close_channel+0x20/0x120 [mlx5_core]
[  179.136418]   mlx5e_close_channels+0x26/0x40 [mlx5_core]
[  179.142364]   mlx5e_close_locked+0x44/0x50 [mlx5_core]
[  179.148509]   mlx5e_close+0x42/0x60 [mlx5_core]
[  179.153936]   __dev_close_many+0xb1/0x120
[  179.158749]   dev_close_many+0xa2/0x170
[  179.163364]   rollback_registered_many+0x148/0x460
[  179.169047]   rollback_registered+0x56/0x90
[  179.174043]   unregister_netdevice_queue+0x7e/0x100
[  179.179816]   unregister_netdev+0x18/0x20
[  179.184623]   mlx5e_remove+0x2a/0x50 [mlx5_core]
[  179.190107]   mlx5_remove_device+0xe5/0x110 [mlx5_core]
[  179.196274]   mlx5_unregister_interface+0x39/0x90 [mlx5_core]
[  179.203028]   cleanup+0x5/0xbfc [mlx5_core]
[  179.208031]   __x64_sys_delete_module+0x16b/0x240
[  179.213640]   do_syscall_64+0x5a/0x210
[  179.218151]   entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  179.224218] irq event stamp: 334398
[  179.228438] hardirqs last  enabled at (334398): [<ffffffffa511d8b7>]
rcu_process_callbacks+0x1c7/0x790
[  179.239178] hardirqs last disabled at (334397): [<ffffffffa511d872>]
rcu_process_callbacks+0x182/0x790
[  179.249931] softirqs last  enabled at (334386): [<ffffffffa509732e>] irq_enter+0x5e/0x70
[  179.259306] softirqs last disabled at (334387): [<ffffffffa509741c>] irq_exit+0xdc/0xf0
[  179.268584]
[  179.268584] other info that might help us debug this:
[  179.276572]  Possible unsafe locking scenario:
[  179.276572]
[  179.283877]        CPU0
[  179.286954]        ----
[  179.290033]   lock(&(&r->consumer_lock)->rlock);
[  179.295546]   <Interrupt>
[  179.298830]     lock(&(&r->consumer_lock)->rlock);
[  179.304550]
[  179.304550]  *** DEADLOCK ***

Fixes: ff7d6b27 ("page_pool: refurbish version of page_pool code")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull sound fixes from Takashi Iwai:
 "A rawmidi race fix and three trivial HD-audio quirks"

* tag 'sound-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Yet another Clevo P950 quirk entry
  ALSA: rawmidi: Change resized buffers atomically
  ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk
  ALSA: hda: add mute led support for HP ProBook 455 G5

Pull crypto fix from Herbert Xu:
 "This fixes an allocation error-path bug in af_alg discovered by
  syzkaller"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - Initialize sg_num_bytes in error code path

Pull networking fixes from David Miller:
 "Lots of fixes, here goes:

   1) NULL deref in qtnfmac, from Gustavo A. R. Silva.

   2) Kernel oops when fw download fails in rtlwifi, from Ping-Ke Shih.

   3) Lost completion messages in AF_XDP, from Magnus Karlsson.

   4) Correct bogus self-assignment in rhashtable, from Rishabh
      Bhatnagar.

   5) Fix regression in ipv6 route append handling, from David Ahern.

   6) Fix masking in __set_phy_supported(), from Heiner Kallweit.

   7) Missing module owner set in x_tables icmp, from Florian Westphal.

   8) liquidio's timeouts are HZ dependent, fix from Nicholas Mc Guire.

   9) Link setting fixes for sh_eth and ravb, from Vladimir Zapolskiy.

  10) Fix NULL deref when using chains in act_csum, from Davide Caratti.

  11) XDP_REDIRECT needs to check if the interface is up and whether the
      MTU is sufficient. From Toshiaki Makita.

  12) Net diag can do a double free when killing TCP_NEW_SYN_RECV
      connections, from Lorenzo Colitti.

  13) nf_defrag in ipv6 can unnecessarily hold onto dst entries for a
      full minute, delaying device unregister. From Eric Dumazet.

  14) Update MAC entries in the correct order in ixgbe, from Alexander
      Duyck.

  15) Don't leave partial mangles bpf program in jit_subprogs, from
      Daniel Borkmann.

  16) Fix pfmemalloc SKB state propagation, from Stefano Brivio.

  17) Fix ACK handling in DCTCP congestion control, from Yuchung Cheng.

  18) Use after free in tun XDP_TX, from Toshiaki Makita.

  19) Stale ipv6 header pointer in ipv6 gre code, from Prashant Bhole.

  20) Don't reuse remainder of RX page when XDP is set in mlx4, from
      Saeed Mahameed.

  21) Fix window probe handling of TCP rapair sockets, from Stefan
      Baranoff.

  22) Missing socket locking in smc_ioctl(), from Ursula Braun.

  23) IPV6_ILA needs DST_CACHE, from Arnd Bergmann.

  24) Spectre v1 fix in cxgb3, from Gustavo A. R. Silva.

  25) Two spots in ipv6 do a rol32() on a hash value but ignore the
      result. Fixes from Colin Ian King"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (176 commits)
  tcp: identify cryptic messages as TCP seq # bugs
  ptp: fix missing break in switch
  hv_netvsc: Fix napi reschedule while receive completion is busy
  MAINTAINERS: Drop inactive Vitaly Bordug's email
  net: cavium: Add fine-granular dependencies on PCI
  net: qca_spi: Fix log level if probe fails
  net: qca_spi: Make sure the QCA7000 reset is triggered
  net: qca_spi: Avoid packet drop during initial sync
  ipv6: fix useless rol32 call on hash
  ipv6: sr: fix useless rol32 call on hash
  net: sched: Using NULL instead of plain integer
  net: usb: asix: replace mii_nway_restart in resume path
  net: cxgb3_main: fix potential Spectre v1
  lib/rhashtable: consider param->min_size when setting initial table size
  net/smc: reset recv timeout after clc handshake
  net/smc: add error handling for get_user()
  net/smc: optimize consumer cursor updates
  net/nfc: Avoid stalls when nfc_alloc_send_skb() returned NULL.
  ipv6: ila: select CONFIG_DST_CACHE
  net: usb: rtl8150: demote allmulti message to dev_dbg()
  ...

Pull DeviceTree fixes from Rob Herring:

 - Fix phandle cache to work with overlays

 - Correct the default clock-frequency for QCom geni-i2c

 - Binding doc quote and spelling fixes

* tag 'devicetree-fixes-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: overlay: update phandle cache on overlay apply and remove
  dt-bindings: Fix unbalanced quotation marks
  dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c
  dt-bindings: w1-gpio: Remove unneeded unit address
  Documentation: devicetree: tilcdc: fix spelling mistake "suppors" -> "supports"

Attempt to make cryptic TCP seq number error messages clearer by
(1) identifying the source of the message as "TCP", (2) identifying the
errors as "seq # bug", and (3) grouping the field identifiers and values
by separating them with commas.

E.g., the following message is changed from:

recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90

to:

TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0
Suggested-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It seems that a *break* is missing in order to avoid falling through
to the default case. Otherwise, checking *chan* makes no sense.

Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If out ring is full temporarily and receive completion cannot go out,
we may still need to reschedule napi if certain conditions are met.
Otherwise the napi poll might be stopped forever, and cause network
disconnect.

Fixes: 7426b1a5 ("netvsc: optimize receive completions")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Vitaly Bordug's email bounces ("ru.mvista.com: Name or service not
known") and there was no activity (ack, review, sign) since 2009.

Cc: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add dependencies on PCI where necessary.

Fixes: 7e2bc7fb ("net: cavium: Drop dependency of NET_VENDOR_CAVIUM on PCI")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stefan Wahren says:

====================
net: qca_spi: Minor bugfixes

This patch series contains some minor bugfixes for
the qca_spi driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In cases the probing fails the log level of the messages should
be an error.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case the SPI thread is not running, a simple reset of sync
state won't fix the transmit timeout. We also need to wake up the kernel
thread.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: ed7d42e2 ("net: qca_spi: fix transmit queue timeout handling")
Signed-off-by: David S. Miller <davem@davemloft.net>

As long as the synchronization with the QCA7000 isn't finished, we
cannot accept packets from the upper layers. So let the SPI thread
enable the TX queue after sync and avoid unwanted packet drop.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06e ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>

The rol32 call is currently rotating hash but the rol'd value is
being discarded. I believe the current code is incorrect and hash
should be assigned the rotated value returned from rol32.

Thanks to David Lebrun for spotting this.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The rol32 call is currently rotating hash but the rol'd value is
being discarded. I believe the current code is incorrect and hash
should be assigned the rotated value returned from rol32.

Detected by CoverityScan, CID#1468411 ("Useless call")

Fixes: b5facfdb ("ipv6: sr: Compute flowlabel for outer IPv6 header of seg6 encap mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: dlebrun@google.com
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv fixes:

 - Fix gateway refcounting in BATMAN IV and V, by Sven Eckelmann (2 patches)

 - Fix debugfs paths when renaming interfaces, by Sven Eckelmann (2 patches)

 - Fix TT flag issues, by Linus Luessing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following sparse warnings:

net/sched/cls_api.c:1101:43: warning: Using plain integer as NULL pointer
net/sched/cls_api.c:1492:75: warning: Using plain integer as NULL pointer
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mii_nway_restart is not pm aware which results in a rtnl deadlock.
Implement mii_nway_restart manual by setting BMCR_ANRESTART if
BMCR_ANENABLE is set.

To reproduce:
* plug an asix based usb network interface
* wait until the device enters PM (~5 sec)
* `ip link set eth1 up` will never return

Fixes: d9fe64e5 ("net: asix: Add in_pm parameter")
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

t.qset_idx can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl()
warn: potential spectre issue 'adapter->msix_info'

Fix this by sanitizing t.qset_idx before using it to index
adapter->msix_info

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rhashtable_init() currently does not take into account the user-passed
min_size parameter unless param->nelem_hint is set as well. As such,
the default size (number of buckets) will always be HASH_DEFAULT_SIZE
even if the smallest allowed size is larger than that. Remediate this
by unconditionally calling into rounded_hashtable_size() and handling
things accordingly.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull btrfs fixes from David Sterba:
 "Three regression fixes. They're few-liners and fixing some corner
  cases missed in the origial patches"

* tag 'for-4.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()
  btrfs: fix use-after-free of cmp workspace pages
  btrfs: restore uuid_mutex in btrfs_open_devices

Pull kvm fixes from Paolo Bonzini:
 "Miscellaneous bugfixes, plus a small patchlet related to Spectre v2"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvmclock: fix TSC calibration for nested guests
  KVM: VMX: Mark VMXArea with revision_id of physical CPU even when eVMCS enabled
  KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer
  KVM/Eventfd: Avoid crash when assign and deassign specific eventfd in parallel.
  x86/kvmclock: set pvti_cpu0_va after enabling kvmclock
  x86/kvm/Kconfig: Ensure CRYPTO_DEV_CCP_DD state at minimum matches KVM_AMD
  kvm: nVMX: Restore exit qual for VM-entry failure due to MSR loading
  x86/kvm/vmx: don't read current->thread.{fs,gs}base of legacy tasks
  KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR

Ursula Braun says:

====================
net/smc: fixes 2018-07-18

here are small fixes for SMC: The first patch speeds up unidirectional
traffic, the second patch increases security, and the third patch
fixes a problem for fallback cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

During clc handshake the receive timeout is set to CLC_WAIT_TIME.
Remember and reset the original timeout value after the receive calls,
and remove a duplicate assignment of CLC_WAIT_TIME.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For security reasons the return code of get_user() should always be
checked.

Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SMC protocol requires to send a separate consumer cursor update,
if it cannot be piggybacked to updates of the producer cursor.
Currently the decision to send a separate consumer cursor update
just considers the amount of data already received by the socket
program. It does not consider the amount of data already arrived, but
not yet consumed by the receiver. Basing the decision on the
difference between already confirmed and already arrived data
(instead of difference between already confirmed and already consumed
data), may lead to a somewhat earlier consumer cursor update send in
fast unidirectional traffic scenarios, and thus to better throughput.
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Suggested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is
because nfc_llcp_send_ui_frame() is retrying the loop without any delay
when nonblocking nfc_alloc_send_skb() returned NULL.

Since there is no need to use MSG_DONTWAIT if we retry until
sock_alloc_send_pskb() succeeds, let's use blocking call.
Also, in case an unexpected error occurred, let's break the loop
if blocking nfc_alloc_send_skb() failed.

[1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My randconfig builds came across an old missing dependency for ILA:

ERROR: "dst_cache_set_ip6" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_get" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_init" [net/ipv6/ila/ila.ko] undefined!
ERROR: "dst_cache_destroy" [net/ipv6/ila/ila.ko] undefined!

We almost never run into this by accident because randconfig builds
end up selecting DST_CACHE from some other tunnel protocol, and this
one appears to be the only one missing the explicit 'select'.

>From all I can tell, this problem first appeared in linux-4.9
when dst_cache support got added to ILA.

Fixes: 79ff2fc3 ("ila: Cache a route to translated address")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PCI SSID 1558:95e1 needs the same quirk for other Clevo P950
models, too.  Otherwise no sound comes out of speakers.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1101143
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Inside a nested guest, access to hardware can be slow enough that
tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work
to be called periodically and the nested guest to spend a lot of time
reading the ACPI timer.

However, if the TSC frequency is available from the pvclock page,
we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration.
'refine' operation.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[Commit message rewritten. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

When eVMCS is enabled, all VMCS allocated to be used by KVM are marked
with revision_id of KVM_EVMCS_VERSION instead of revision_id reported
by MSR_IA32_VMX_BASIC.

However, even though not explictly documented by TLFS, VMXArea passed
as VMXON argument should still be marked with revision_id reported by
physical CPU.

This issue was found by the following setup:
* L0 = KVM which expose eVMCS to it's L1 guest.
* L1 = KVM which consume eVMCS reported by L0.
This setup caused the following to occur:
1) L1 execute hardware_enable().
2) hardware_enable() calls kvm_cpu_vmxon() to execute VMXON.
3) L0 intercept L1 VMXON and execute handle_vmon() which notes
vmxarea->revision_id != VMCS12_REVISION and therefore fails with
nested_vmx_failInvalid() which sets RFLAGS.CF.
4) L1 kvm_cpu_vmxon() don't check RFLAGS.CF for failure and therefore
hardware_enable() continues as usual.
5) L1 hardware_enable() then calls ept_sync_global() which executes
INVEPT.
6) L0 intercept INVEPT and execute handle_invept() which notes
!vmx->nested.vmxon and thus raise a #UD to L1.
7) Raised #UD caused L1 to panic.
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 773e8a04Signed-off-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A comment warning against this bug is there, but the code is not doing what
the comment says.  Therefore it is possible that an EPOLLHUP races against
irq_bypass_register_consumer.  The EPOLLHUP handler schedules irqfd_shutdown,
and if that runs soon enough, you get a use-after-free.
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>

Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free
when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel
for one specific eventfd. When the assign path hasn't finished but irqfd
has been added to kvm->irqfds.items list, another thead may deassign the
eventfd and free struct kvm_kernel_irqfd(). The assign path then uses
the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid
such issue, keep irqfd under kvm->irq_srcu protection after the irqfd
has been added to kvm->irqfds.items list, and call synchronize_srcu()
in irq_shutdown() to make sure that irqfd has been fully initialized in
the assign path.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Tianyu Lan <tianyu.lan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>