We should only have an error when enforcing strict mapping between
kernel and firmware versions. In all other cases, there is no reason
to throw a warning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200719.26961-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove extra space in front of mchp_pdmc_dt_init().
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220711112212.888895-1-claudiu.beznea@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Needed for the Rockchip driver.

Commit a5450aba ("ASoC: rockchip: i2s: switch BCLK to GPIO") switched
BCLK to GPIO functions when probing the i2s bus interface, but missed
adding a check for when devm_pinctrl_get() returns an error.  This can lead
to the following NULL pointer dereference on a rockpro64-v2 if there are no
"pinctrl" properties in the i2s device tree node.

Check that i2s->pinctrl is valid before attempting to search for the
bclk_on and bclk_off pinctrl states.

Fixes: a5450aba ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20220711130522.401551-1-alexandru.elisei@arm.comSigned-off-by: Mark Brown <broonie@kernel.org>

Avoid build errors when CONFIG_COMMON_CLK is not set/enabled.

ERROR: modpost: "__clk_get_name" [sound/soc/fsl/snd-soc-fsl-utils.ko] undefined!

Fixes: 7bad8125 ("ASoC: fsl_utils: Add function to handle PLL clock source")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657507190-14546-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove condition with no effect
Signed-off-by: Zhongjun Tan <tanzhongjun@coolpad.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220708024651.42999-1-hbut_tan@163.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Audio Graph Card2 has Codec2Codec support, but I noticed
 - Current Codec2Codec setting value is not correct
   because it is using of_get_property().
 - simple-card-utils has default Codec2Codec settings
   and it is overwriting Card2 settings
 - This default settings works for non Codec2Codec case
   (= DPCM::BE case) too.

This patch-set solve these issues.

Merge series from Brent Lu <brent.lu@intel.com>:

1. Add BT offload fetch to cs42l42 machine driver
2. Support cs42l42+max98360a on ADL platform

This patch adds driver data for adl_mx98360a_cs4242 which supports
two max98360a speaker amplifiers on SSP1 and cs42l42 headphone codec
on SSP0 running on ADL platform.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-3-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add the capability to machine driver of creating DAI Link for BT
offload. Although BT offload always uses SSP2 port but we reserve the
flexibility to assign the port number in macro.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-2-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The patch is to make driver with flexibility for more platforms support even if
the internal design is just one ADC. Besides, many I2S controllers only support
2 channels.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220708054647.540621-1-CTLIN0@nuvoton.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix following includecheck warning:
./sound/soc/amd/acp-es8336.c: linux/module.h is included more than once.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220707232540.22589-1-yang.lee@linux.alibaba.comSigned-off-by: Mark Brown <broonie@kernel.org>

add tas2780.yaml
Signed-off-by: Raphael-Xu <13691752556@139.com>
Link: https://lore.kernel.org/r/20220707123343.2403-2-13691752556@139.comSigned-off-by: Mark Brown <broonie@kernel.org>

1.update Kconfig and Makefile 2.add tas2780.c and tas2780.h
Signed-off-by: Raphael-Xu <13691752556@139.com>
Link: https://lore.kernel.org/r/20220707123343.2403-1-13691752556@139.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix below kernel warning.
>>> sound/soc/amd/acp-es8336.c:200:13: warning: variable 'ret' set but
>>> not used [-Wunused-but-set-variable]
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220707132613.3150931-3-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Drop machine driver remove() function.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220707132613.3150931-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Removed unused header file inclusion from Jadeite platform machine
driver.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20220707132613.3150931-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sparse warnings:

sound/soc/amd/acp-es8336.c:36:15: error: symbol 'codec_dev' was not
declared. Should it be static?

sound/soc/amd/acp-es8336.c:37:18: error: symbol 'gpio_pa' was not
declared. Should it be static?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220707214614.61081-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current asoc_simple_init_for_codec2codec() adds default Codec2Codec
settings if rtd was Codec only.
But DPCM:BE also judged as Codec only, because dummy-DAI doesn't have
"endianness" (which is key parameter to judge as Codec).

This patch ignores setup Codec2Codec settings if it was DPCM:BE case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ts950.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio Graph Card2 setups own Codec2Codec settings,
but current simple-card-utils.c will try to setup Codec2Codec default
settings if needed, it will overwirtes the settings.
This patch ignores default Codec2Codec settings if it already have.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9s95b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

audio-graph-card2-custom-sample.dtsi will be used to test
Audio-Graph-Card2 behavior. But it is difficult to say that it is easy
to understand, because the comment/explanation are not so many.

This patch add verbose explanation to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czeps95h.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Because Codec2Codec settings becomes optional, we don't need to keep
its parameter space when init time. This patch removes its default
memory allocation from simple-card-utils.c, and allocate it at
audio-graph-card2 ondemand.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5s95o.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current audio-graph-card2 can use Codec2Codec, and having its
original parameter (= rate) on DT is mandatory for now.

But simple-card-utils.c has asoc_simple_init_for_codec2codec() to
setup *default* Codec2Codec settings.

This patch makes Audio Graph Card2 Codec2Codec rate settings
optional.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjls95u.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Audio Graph Card2 is using of_get_property(), but it should use
of_property_read_u32() to getting rate. Otherwise the setting will be
strange value. This patch fixup it.

Fixes: c3a15c92 ("ASoC: audio-graph-card2: add Codec2Codec support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h741s961.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).

The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.

Fixes: bc2bd45b ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.

Fixes: bc2bd45b ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Starting from ADL platform we have four HDMI PCM devices which exceeds
the size of sof_hdmi array. Since each sof_hdmi_pcm structure
represents one HDMI PCM device, we remove the sof_hdmi array and add a
new member hdmi_jack to the sof_hdmi_pcm structure to fix the
out-of-bounds problem.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220701141517.264070-1-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph
with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph
is not released, which will lead to a memory leak.

We can release the graph->graph with kfree() when idr_alloc() fails to
fix the memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.comSigned-off-by: Mark Brown <broonie@kernel.org>

The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!

Also add support for explicit polarity inversion.

Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f3145 ("ASoC: tas2770: Insert post reset delay").

Fixes: 827ed8a0 ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.orgSigned-off-by: Mark Brown <broonie@kernel.org>

For the existing msm8916 bindings the minimum reg/reg-names is 1 not 2.
Similarly the minimum interrupt/interrupt-names is 1 not 2.

Fixes: f3fc4fbf ("ASoC: dt-bindings: Add SC7280 lpass cpu bindings")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629114012.3282945-1-bryan.odonoghue@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Make sure all AC97 interface lines are spelled in capitals,
to avoid confusing readers about where the 5th line is.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220628165840.152235-1-marex@denx.deSigned-off-by: Mark Brown <broonie@kernel.org>

Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE,
however this register is not used on wm8998. This was not noticed as
previously snd_soc_component_read did not print an error message.
However, now the log gets filled with error messages, further more the
test for if the LRCLK changed will return spurious results.

Update the code to use the RX_BCLK_RATE register, the LRCLK parameters
are written to both registers and the RX_BCLK_RATE register is used
across all Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The output compensation controls always returns zero regardless of if
the control value was updated. This results in missing notifications
to user-space of the control change. Update the handling to return 1
when the value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Currently slim_tx_mixer_get reports all TX mixers as enabled when
at least one is, due to it reading the entire tx_port_value bitmask
without testing the specific bit corresponding to a TX port.
Furthermore, using the same bitmask for all capture DAIs makes
setting one mixer affect them all. To prevent this, and since
the SLIM TX muxes effectively only connect to one of the mixers
at a time, turn tx_port_value into an int array storing the DAI
index each of the ports is connected to.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>