- 23 Nov, 2022 40 commits
-
-
Mitja Spes authored
Added max SPI frequency setting to the example. Signed-off-by:
Mitja Spes <mitja@lxnav.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221021135827.1444793-4-mitja@lxnav.comSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Matti Vaittinen authored
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Acked-by:
Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/8b1193fdefb231a6d721e2bded52c48e56039c20.1660934107.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Signed-off-by:
-
Matti Vaittinen authored
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Signed-off-by:
Alexandru Lazar <alazar@startmail.com> Link: https://lore.kernel.org/r/7c759bf6c06e72ae70bffeebc1939d9903427278.1660934107.git.mazziesaccount@gmail.comSigned-off-by:
-
Matti Vaittinen authored
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() and drop the pointer to the regulator. This simplifies code and makes it less tempting to add manual control for the regulator which is also controlled by devm. Whilst here also switch to dev_err_probe() to provide more information if a deferred probe occurs. Signed-off-by:
-
Matti Vaittinen authored
Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(), add_action_or_reset(regulator_disable)' and use the devm_regulator_get_enable() Signed-off-by:
-
Matti Vaittinen authored
Use devm_regulator_bulk_get_enable() instead of open coded bulk-get, bulk-enable, add-action-to-disable-at-detach - pattern. A functional change (which seems like a bugfix) is that if regulator_bulk_get fails, the enable is not attempted. Signed-off-by:
-
Matti Vaittinen authored
Use devm_regulator_bulk_get_enable() instead of open coded bulk-get, bulk-enable, add-action-to-disable-at-detach - pattern. Signed-off-by:
-
Matti Vaittinen authored
Use devm_regulator_bulk_get_enable() instead of open coded bulk-get, bulk-enable, add-action-to-disable-at-detach - pattern. Signed-off-by:
-
Matti Vaittinen authored
Use devm_regulator_get_enable() instead of open coded get, enable, add-action-to-disable-at-detach - pattern. Also drop the seemingly unused struct member 'dvdd'. Signed-off-by:
-
Jonathan Cameron authored
As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace. Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings. Signed-off-by:
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://lore.kernel.org/r/20220925155719.3316280-6-jic23@kernel.orgSigned-off-by:
-
Jonathan Cameron authored
As these exports are only relevant to core module and users in the bus specific modules, move them out of the main kernel namespace. Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings. Signed-off-by:
-
Jonathan Cameron authored
Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that brings by allowing the compiler to remove unused struct dev_pm_ops and callbacks without needing explicit __maybe_unused markings. Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Link: https://lore.kernel.org/r/20220925155719.3316280-4-jic23@kernel.orgSigned-off-by:
-
Jonathan Cameron authored
Using this macro allows the compiler to remove unused structures and callbacks if we are not building with CONFIG_PM* without needing __maybe_unused markings. Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20220925155719.3316280-3-jic23@kernel.orgSigned-off-by:
-
Rajat Khandelwal authored
MPL115 supports shutdown gpio which can be used to set the state to low power mode. Power from all internal circuits and registers is removed. This is done by pulling the SHDN pin to low. This patch enables runtime PM on MPL115 to increase power savings. According to spec., a wakeup time period of ~5 ms exists between waking up and actually communicating with the device. This is implemented using sleep delay. Signed-off-by:
Rajat Khandelwal <rajat.khandelwal@linux.intel.com> Link: https://lore.kernel.org/r/20221010173720.568916-1-rajat.khandelwal@linux.intel.comSigned-off-by:
-
Nuno Sá authored
Now that there are no more users accessing 'mlock' directly, we can move it to the iio_dev private structure. Hence, it's now explicit that new driver's should not directly use this lock. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20221012151620.1725215-5-nuno.sa@analog.comSigned-off-by:
-
Nuno Sá authored
The pattern used in this device does not quite fit in the iio_device_claim_direct_mode() typical usage. In this case, we want to know if we are in buffered mode or not to know if the device is powered (buffer mode) or not. And depending on that max30102_get_temp() will power on the device if needed. Hence, in order to keep the same functionality, we try to: 1. Claim Buffered mode; 2: If 1) succeeds call max30102_get_temp() without powering on the device; 3: Release Buffered mode; 4: If 1) fails, Claim Direct mode; 5: If 4) succeeds call max30102_get_temp() with powering on the device; 6: Release Direct mode; 7: If 4) fails, goto to 1) and try again. This dance between buffered and direct mode is not particularly pretty (as well as the loop introduced by the goto statement) but it does allow us to get rid of the mlock usage while keeping the same behavior. Signed-off-by:
-
Nuno Sá authored
The pattern used in this device does not quite fit in the iio_device_claim_direct_mode() typical usage. In this case, iio_buffer_enabled() was being used not to prevent the raw access but to allow it. Hence, let's make use of the new iio_device_claim_buffer_mode() API to make sure we stay in buffered mode during the complete read. Note that we are shadowing the error code returned by iio_device_claim_buffer_mode() so that we keep the original one (-EAGAIN). The reason is that some userspace stack might already be relying on this particular code so that we are not taking chances and leave it alone. Signed-off-by:
-
Nuno Sá authored
These APIs are analogous to iio_device_claim_direct_mode() and iio_device_release_direct_mode() but, as the name suggests, with the logic flipped. While this looks odd enough, it will have at least two users (in following changes) and it will be important to move the IIO mlock to the private struct. Signed-off-by:
-
Olivier Moysan authored
Force minimum sampling time for all internal channels according to datasheet requirement. This value can be increased through DT st,min-sample-time-ns property. Signed-off-by:
Olivier Moysan <olivier.moysan@foss.st.com> Reviewed-by:
Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20221012142205.13041-5-olivier.moysan@foss.st.comSigned-off-by:
-
Olivier Moysan authored
Add STM32 ADC support for STM32MP13x SOCs family. On STM32MP13x, each ADC peripheral has a single ADC block. These ADC peripherals, ADC1 and ADC2, are fully independent. This introduces changes in common registers handling. Some features such as boost mode, channel preselection and linear calibration are not supported by the STM32MP13x ADC. Add diversity management for these features. The STM32MP13x ADC introduces registers and bitfield variants on existing features such as calibration factors and internal channels. Add register diversity management. Add also support for new internal channels VDDCPU and VDDQ_DDR. Signed-off-by:
-
Olivier Moysan authored
Add st,stm32mp13-adc-core and st,stm32mp13-adc compatibles to support STM32MPU13 SoC. On STM32MP13x, each ADC peripheral has a single ADC block. These ADC peripherals, ADC1 and ADC2, are fully independent. Main characteristics of STM32MP13x ADC: - One interrupt line per ADC - 6 to 12 bits resolution - 19 channels ADC2 instance supports two extra internal channels VDDCPU and VDDQ_DDR. Add "vddcpu" and "vddq_ddr" internal channels names to the reserved labels list. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20221012142205.13041-3-olivier.moysan@foss.st.comSigned-off-by:
-
Lorenzo Bianconi authored
Introduce st_lsm6dsx_device_set_enable utility routine and remove duplicated code used to enable/disable sensors Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/e3fbe5d4a3bed41130908669f745f78c8505cf47.1665399959.git.lorenzo@kernel.orgSigned-off-by:
-
ChiaEn Wu authored
MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight driver, display bias voltage supply, one general purpose LDO, and the USB Type-C & PD controller complies with the latest USB Type-C and PD standards. Add support for the MT6370 ADC driver for system monitoring, including charger current, voltage, and temperature. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by:
ChiaEn Wu <chiaen_wu@richtek.com> Link: https://lore.kernel.org/r/81ec58ae89030e48508d6810396de2679c40d26c.1665488982.git.chiaen_wu@richtek.comSigned-off-by:
-
Ibrahim Tilki authored
Adding documentation for Analog Devices max11410 adc userspace sysfs. Signed-off-by:
Ibrahim Tilki <Ibrahim.Tilki@analog.com> Link: https://lore.kernel.org/r/20221003105903.229-4-Ibrahim.Tilki@analog.comSigned-off-by:
-
Ibrahim Tilki authored
Adding devicetree binding documentation for max11410 adc. Signed-off-by:
-
Ibrahim Tilki authored
Adding support for max11410 24-bit, 1.9ksps delta-sigma adc which has 3 differential reference and 10 differential channel inputs. Inputs and references can be buffered internally. Inputs can also be amplified with internal PGA. Device has four digital filter modes: FIR50/60, FIR50, FIR60 and SINC4. FIR 50Hz and 60Hz rejections can be enabled/disabled separately. Digital filter selection affects sampling frequency range so driver has to consider the configured filter when configuring sampling frequency. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. Signed-off-by:
-
Krzysztof Kozlowski authored
For devices connectable by SPI bus (e.g. already using "spi-max-frequency" property), reference the "spi-peripheral-props.yaml" schema to allow using all SPI device properties, even these which device bindings author did not tried yet. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Krzysztof Kozlowski authored
Improve example by: dropping unrelated properties (status and cs-gpios) and using generic node name. Signed-off-by:
-
Krzysztof Kozlowski authored
Reference the spi-peripheral-props.yaml schema to allow using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by:
-
Nuno Sá authored
As the maintainer email no longer exists, change it to myself. Signed-off-by:
-
Nuno Sá authored
As the maintainer email no longer exists, change it to myself. Signed-off-by:
-
Nuno Sá authored
The iio_device lock is only meant for internal use. Hence define a device local lock to protect against concurrent accesses. While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by:
-
Nuno Sá authored
The iio_device lock is only meant for internal use. Hence define a device local lock to protect against concurrent accesses. While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by:
-
Nuno Sá authored
In order to drop the internal lock usage we needed two different things: 1) The first place where 'mlock' was being used was a typical case where iio_device_claim_direct_mode() fits perfectly. 2) In the second case, it was being used to prevent concurrent accesses to the device and shared data but nothing was being enforced with regards to buffering (i.e, there was nothing preventing from changing the conversion mode while buffering). Hence, in this case, a new lock was introduced in the state structure. Note that the goal is not to introduce any functional change and that is the reason why a new lock was introduced to guarantee 2). While at it, properly include "mutex.h" for mutex related APIs. Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/20221004134909.1692021-11-nuno.sa@analog.comSigned-off-by:
-
