- 06 Aug, 2024 38 commits
-
-
Christian König authored
Instead of a TTM reference grab a GEM reference whenever necessary. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
Sunil Khatri <sunil.khatri@amd.com> Signed-off-by:
-
Tvrtko Ursulin authored
For some value of optimisation we can replace the division with an bitwise and. And it even shrinks the code. Before: 6c9: 53 push %rbx 6ca: 4c 8b 47 08 mov 0x8(%rdi),%r8 6ce: 31 d2 xor %edx,%edx 6d0: 48 89 fb mov %rdi,%rbx 6d3: 8b 87 c8 05 00 00 mov 0x5c8(%rdi),%eax 6d9: 41 8b 48 04 mov 0x4(%r8),%ecx 6dd: f7 d0 not %eax 6df: 21 c8 and %ecx,%eax 6e1: 83 c1 01 add $0x1,%ecx 6e4: 83 c0 01 add $0x1,%eax 6e7: f7 f1 div %ecx 6e9: 89 d6 mov %edx,%esi 6eb: 41 ff 90 88 00 00 00 call *0x88(%r8) After: 6c9: 53 push %rbx 6ca: 48 8b 57 08 mov 0x8(%rdi),%rdx 6ce: 48 89 fb mov %rdi,%rbx 6d1: 8b 87 c8 05 00 00 mov 0x5c8(%rdi),%eax 6d7: 8b 72 04 mov 0x4(%rdx),%esi 6da: f7 d0 not %eax 6dc: 21 f0 and %esi,%eax 6de: 83 c0 01 add $0x1,%eax 6e1: 21 c6 and %eax,%esi 6e3: ff 92 88 00 00 00 call *0x88(%rdx) Reviewed-by:Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Signed-off-by:
-
Hawking Zhang authored
Data abort exception and unknown errors are supported. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
-
Likun Gao authored
MMHUB v4.1.0 only support fixed cache mode, so only use legacy invalidation accordingly. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Frank Min <Frank.Min@amd.com> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn32_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn401_set_output_transfer_func function. Previously, set_output_gamma was being checked for null, but then it was being dereferenced without any null check. This could lead to a null pointer dereference if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for the set_output_gamma function pointer in the dcn20_set_output_transfer_func function. Previously, set_output_gamma was being checked for null at line 1030, but then it was being dereferenced without any null check at line 1048. This could potentially lead to a null pointer dereference error if set_output_gamma is null. To fix this, we now ensure that set_output_gamma is not null before dereferencing it. We do this by adding a null check for set_output_gamma before the call to set_output_gamma at line 1048. Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Yifan Zhang authored
avoid using SDMA if it is unavailable. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Tim Huang <tim.huang@amd.com> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Reviewed-by:
-
Jonathan Kim authored
The number of watchpoints should be set and constrained per logical partition device, not by the socket device. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Harish Kasiviswanathan <harish.kasiviswanathan@amd.com> Signed-off-by:
-
Sunil Khatri authored
Do not make a function call for zero size NOP as it does not add anything in the ring and is unnecessary function call. Reviewed-by:
-
Jonathan Kim authored
Support per-queue reset for GFX9. The recommendation is for the driver to target reset the HW queue via a SPI MMIO register write. Since this requires pipe and HW queue info and MEC FW is limited to doorbell reports of hung queues after an unmap failure, scan the HW queue slots defined by SET_RESOURCES first to identify the user queue candidates to reset. Only signal reset events to processes that have had a queue reset. If queue reset fails, fall back to GPU reset. Signed-off-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Sunil Khatri authored
Adding NOP packets one by one in the ring does not use the CP efficiently. Solution: Use CP optimization while adding NOP packet's so PFP can discard NOP packets based on information of count from the Header instead of fetching all NOP packets one by one. Cc: Christian König <christian.koenig@amd.com> Cc: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Cc: Tvrtko Ursulin <tursulin@igalia.com> Cc: Marek Olšák <marek.olsak@amd.com> Reviewed-by:
-
Srinivasan Shanmugam authored
This commit corrects the function comment for 'dpp401_dscl_program_isharp' in 'dcn401_dpp_dscl.c'. The comment previously included a description for a non-existent parameter 'bs_coeffs_updated'. This parameter description has been removed to reflect the function's actual parameters. Fixes the below with gcc W=1: drivers/gpu/drm/amd/amdgpu/../display/dc/dpp/dcn401/dcn401_dpp_dscl.c:981: warning: Excess function parameter 'bs_coeffs_updated' description in 'dpp401_dscl_program_isharp' Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Sunil Khatri authored
debugfs register list for dump is cleaned as it have some issues related to proper power state of the IP before register read. Since the above mentioned is removed we no longer want this to be dumped part of the devcoredump and hence removed. Reviewed-by:
-
Sunil Khatri authored
There are some problem with existing amdgpu_reset_dump_register_list debugfs node. It is supposed to read a list of registers but there could be cases when the IP is not in correct power state. Register read in such cases could lead to more problems. We are taking care of all such power states in devcoredump and dumping the registers of need for debugging. So cleaning this code and we dont need this functionality via debugfs anymore. Reviewed-by:
-
Kenneth Feng authored
add overdrive support on smu v14.0.2/3 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Srinivasan Shanmugam authored
This commit adds a null check for 'stream_status' in the function 'planes_changed_for_existing_stream'. Previously, the code assumed 'stream_status' could be null, but did not handle the case where it was actually null. This could lead to a null pointer dereference. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_resource.c:3784 planes_changed_for_existing_stream() error: we previously assumed 'stream_status' could be null (see line 3774) Cc: Tom Chung <chiahsuan.chung@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Roman Li <roman.li@amd.com> Cc: Alex Hung <alex.hung@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Kenneth Feng authored
update powerplay structure on smu v14.0.2/3 Signed-off-by:
-
Philip Yang authored
Fixes the below if kernel config not enable HMM support >> drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_queue.c:107:26: error: implicit declaration of function 'svm_range_from_addr' >> drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_queue.c:107:24: error: assignment to 'struct svm_range *' from 'int' makes pointer from integer without a cast [-Wint-conversion] >> drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_queue.c:111:28: error: invalid use of undefined type 'struct svm_range' Fixes: b049504e ("drm/amdkfd: Validate user queue svm memory residency") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407252127.zvnxaKRA-lkp@intel.com/Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Aric Cyr authored
This version brings along the following: - SPL improvements. - Address coverity issues. - DML2 fixes. - Code cleanup. - DIO and DCCG refactor. - Improve the PSR state. Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
Rodrigo Siqueira <rodrigo.siqueira@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Rodrigo Siqueira authored
Remove function pointers that were never used. Reviewed-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Rodrigo Siqueira authored
Add missing debug registers for DCN32. Reviewed-by:
-
Rodrigo Siqueira authored
Initialize the field dcc_meta_propagation_delay_us with 10 ms. Reviewed-by:
-
Rodrigo Siqueira authored
Add missing register programming for mcache in DCN401. Reviewed-by:
-
Rodrigo Siqueira authored
DCN_MINIMUM_DISPCLK_Khz and DCN_MINIMUM_DPPCLK_Khz is declared twice. This commit removes that duplication. Reviewed-by:
-
Rodrigo Siqueira authored
The commit 5034b935 ("drm/amd/display: Modify DHCUB waterwark structures and functions") introduced a code refactor for DCHUB, but during the merge process into amd-staging-drm-next, the program det segments were removed. This commit adds the DET segment programming for DCN35. Fixes: 5034b935 ("drm/amd/display: Modify DHCUB waterwark structures and functions") Reviewed-by:
-
Alvin Lee authored
P-State force programming is handled entirely by FW in FAMS2. Remove any programming from driver side to prevent incorrect programming from driver side (which may override FW programming) Signed-off-by:
Alvin Lee <Alvin.Lee2@amd.com> Reviewed-by:
-
Sung Lee authored
[WHY] Cursor position code had improper offsets in scaled modes. [HOW] Adjust cursor scaling to account for cursor offsets properly. Reviewed-by:
Sung Lee <sunglee@amd.com> Tested-by:
-
Rodrigo Siqueira authored
In the commit c2cec7a872b6 ("drm/amd/display: Wake DMCUB before sending a command for replay feature"), replaced dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd in multiple areas, but due to merge issues the replacement of this function in the dmub_replay_copy_settings was missed. This commit replaces the old dm_execute_dmub_cmd with dc_wake_and_execute_dmub_cmd. Fixes: 3601a35a ("drm/amd/display: Wake DMCUB before sending a command for replay feature") Reviewed-by: -
Rodrigo Siqueira authored
SPL has a control field for controlling the two pixels per container that is not in use yet. This commit adds a proper initialization for this feature. Reviewed-by:
-
Rodrigo Siqueira authored
Move the lb_memory_config close to the pixel format enums to improve the code readability. Reviewed-by:
-
Cruise authored
The link index wasn't updated for the AUX reply notification. Get link index based on DPIA instance for AUX reply notification. Signed-off-by:
Cruise <Cruise.Hung@amd.com> Reviewed-by:
Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by:
-
Alex Hung authored
CalculateSwathAndDETConfiguration_params_st's UnboundedRequestEnabled is a pointer (i.e. dml_bool_t *UnboundedRequestEnabled), and thus p->UnboundedRequestEnabled checks its address, not bool value. To check value, *p->UnboundedRequestEnabled is used instead. This fixes 1 REVERSE_INULL issue reported by Coverity. Signed-off-by:
Alex Hung <alex.hung@amd.com> Reviewed-by:
-
Daniel Sa authored
[WHY] In dcn401 we read clock values before FW is loaded. These incorrect values cause the driver to believe that we are running higher clocks than what we actually have. This then causes corruption/underflow for the eGPU. [HOW] When new values are read from HW, update internal structures to propagate the new/correct value. Fixes issue Signed-off-by:
Daniel Sa <Daniel.Sa@amd.com> Reviewed-by:
-
Meenakshikumar Somasundaram authored
[Why] Aux transfer retries path does not support dp tunneling. [How] Based on ddc pin check, aux will be issued in legacy path or DMUB. Signed-off-by:
Eric Yang <eric.yang@amd.com> Tested-by:
-
- 27 Jul, 2024 2 commits
-
-
Hansen Dsouza authored
Add new enable and disable functions based on DCCG spec. Signed-off-by:
Hansen Dsouza <Hansen.Dsouza@amd.com> Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] It's currently hard coded to 256 when it should be using the SOC provided values. This can result in corruption with linear surfaces where we prefetch more PTE than the buffer can hold. [How] Update the min page size correctly for the plane. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Jun Lei <jun.lei@amd.com> Tested-by:
-
