- 13 Nov, 2006 8 commits
-
-
s.hauer@pengutronix.de authored
dev_t boot_dev is declared in arch/powerpc/kernel/setup_32.c and in arch/powerpc/kernel/setup_64.c but not used in these files. It is only used in arch/powerpc/platforms/powermac/setup.c, so make it static in this file. Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
s.hauer@pengutronix.de authored
Since iSeries is merged to MULTIPLATFORM, there is no way to build a 64bit kernel without MULTIPLATFORM, so PPC_MULTIPLATFORM can be removed in 64bit-only files. Signed-off-by:
-
s.hauer@pengutronix.de authored
Since iSeries is merged to MULTIPLATFORM, there is no way to build a 64bit kernel without MULTIPLATFORM, so PPC_MULTIPLATFORM can be removed in 64bit-only files. Signed-off-by:
-
s.hauer@pengutronix.de authored
The _machine macro was once used for compatibility with ARCH=ppc drivers. It is unused in current kernels, so remove it. Signed-off-by:
-
s.hauer@pengutronix.de authored
Current kernels always have one of CONFIG_PPC_MULTIPLATFORM or CONFIG_PPC32 defined, so remove bogus ifdef. Signed-off-by:
-
Sascha Hauer authored
iommu_setup_pSeries() and iommu_setup_dart() are declared extern but are not implemented, so remove them. Remove ifdef around extern function declaration. Signed-off-by:
-
s.hauer@pengutronix.de authored
Replace CONFIG_PPC_MULTIPLATFORM with CONFIG_PPC_PMAC in drivers/net/tulip/de4x5.c. It is needed for a pmac specific hook but has nothing with to do with PPC_MULTIPLATFORM. Signed-off-by:
-
Sascha Hauer authored
There is some PPC_CHRP specific code in drivers/ide/pci/via82cxxx.c, so #ifdef on CONFIG_PPC_CHRP instead of CONFIG_PPC_MULTIPLATFORM. Signed-off-by:
-
- 25 Oct, 2006 18 commits
-
-
Christian Krafft authored
This patch adds a cpufreq backend driver to enable frequency scaling on cell. Signed-off-by:
Christian Krafft <krafft@de.ibm.com> Signed-off-by:
Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by:
-
Michael Ellerman authored
This patch adds a command to xmon for dumping information about spu structs. The command is 'sf' for "spu fields" perhaps, and takes the spu number as an argument. This is the same value as the spu->number field, or the "phys-id" value of a context when it is bound to a physical spu. We try to catch memory errors as we dump each field, hopefully this will make the command reasonably robust, but YMMV. If people see a need we can easily add more fields to the dump in future. Output looks something like this: 0:mon> sf 0 Dumping spu fields at address c00000001ffd9e80: number = 0x0 name = spe devnode->full_name = /cpus/PowerPC,BE@0/spes/spe@0 nid = 0x0 local_store_phys = 0x20000000000 local_store = 0xd0000800801e0000 ls_size = 0x0 isrc = 0x4 node = 0x0 flags = 0x0 dar = 0x0 dsisr = 0x0 class_0_pending = 0 irqs[0] = 0x16 irqs[1] = 0x17 irqs[2] = 0x24 slb_replace = 0x0 pid = 0 prio = 0 mm = 0x0000000000000000 ctx = 0x0000000000000000 rq = 0x0000000000000000 timestamp = 0x0000000000000000 problem_phys = 0x20000040000 problem = 0xd000080080220000 problem->spu_runcntl_RW = 0x0 problem->spu_status_R = 0x0 problem->spu_npc_RW = 0x0 priv1 = 0xd000080080240000 priv1->mfc_sr1_RW = 0x33 priv2 = 0xd000080080250000 Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
This patch adds support for stopping, and restarting, spus from xmon. We use the spu master runcntl bit to stop execution, this is apparently the "right" way to control spu execution and spufs will be changed in the future to use this bit. Testing has shown that to restart execution we have to turn the master runcntl bit on and also rewrite the spu runcntl bit, even if it is already set to 1 (running). Stopping spus is triggered by the xmon command 'ss' - "spus stop" perhaps. Restarting them is triggered via 'sr'. Restart doesn't start execution on spus unless they were running prior to being stopped by xmon. Walking the spu->full_list in xmon after a panic, would mean corruption of any spu struct would make all the others inaccessible. To avoid this, and also to make the next patch easier, we cache pointers to all spus during boot. We attempt to catch and recover from errors while stopping and restarting the spus, but as with most xmon functionality there are no guarantees that performing these operations won't crash xmon itself. Signed-off-by:
-
arnd@arndb.de authored
This moves the cell idle function to use the default cpu_idle with a special power_save callback, like all other platforms except iSeries already do. It also makes it possible to disable this power_save function with a new powerpc-specific boot option "powersave=off". Signed-off-by:
-
Christian Krafft authored
This patch adds a module that registers sysfs attributes to CPU and SPU containing the temperature of the CBE. They can be found under /sys/devices/system/spu/cpuX/thermal/temperature[0|1] /sys/devices/system/spu/spuX/thermal/temperature The temperature is read from the on-chip temperature sensors. Signed-off-by:
-
Christian Krafft authored
This patch adds two functions to create and remove sysfs attributes and attribute_group to all cpus. That allows to register sysfs attributes in a subdirectory like: /sys/devices/system/cpu/cpuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-of-by:
-
Christian Krafft authored
In order to add sysfs attributes to all spu's, there is a need for a list of all available spu's. Adding the device_node makes also sense, as it is needed for proper register access. This patch also adds two functions to create and remove sysfs attributes and attribute_groups to all spus. That allows to group spu attributes in a subdirectory like: /sys/devices/system/spu/spuX/group_name/what_ever This will be used by cbe_thermal to group all attributes dealing with thermal support in one directory. Signed-off-by:
-
Kevin Corry authored
Add routines for accessing the registers and counters in the performance monitoring unit. Signed-off-by:
Kevin Corry <kevcorry@us.ibm.com> Signed-off-by:
-
Kevin Corry authored
Many of the registers in the performance monitoring unit are write-only. We need to save a "shadow" copy when we write to those registers so we can retrieve the values if we need them later. The new cbe_pmd_shadow_regs structure is added to the cbe_regs_map structure so we have the appropriate per-node copies of these shadow values. Signed-off-by:
-
David Erb authored
There are a few definitions that are required by subsequent patches, so add them here. The original patch is from David Erb, but is significantly cleaned up by Kevon Corry. Cc: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by:
-
Jeremy Kerr authored
When in isolated mode, SPEs have access to an area of persistent storage, which is per-SPE. In order for isolated-mode apps to communicate arbitrary data through this storage, we need to ensure that isolated physical SPEs can be reused for subsequent applications. Add a file ("recycle") in a spethread dir to enable isolated-mode recycling. By writing to this file, the kernel will reload the isolated-mode loader kernel, allowing a new app to be run on the same physical SPE. This requires the spu_acquire_exclusive function to enforce exclusive access to the SPE while the loader is initialised. Signed-off-by:Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
-
arnd@arndb.de authored
This patch adds general support for isolated mode SPE apps. Isolated apps are started indirectly, by a dedicated loader "kernel". This patch starts the loader when spe_create is invoked with the ISOLATE flag. We do this at spe_create time to allow libspe to pass the isolated app in before calling spe_run. The loader is read from the device tree, at the location "/spu-isolation/loader". If the loader is not present, an attempt to start an isolated SPE binary will fail with -ENODEV. Update: loader needs to be correctly aligned - copy to a kmalloced buf. Update: remove workaround for systemsim/spurom 'L-bit' bug, which has been fixed. Update: don't write to runcntl on spu_run_init: SPU is already running. Update: do spu_setup_isolated earlier Tested on systemsim. Signed-off-by: -
arnd@arndb.de authored
Signed-off-by:
-
Mark Nutter authored
This adds two new flags to spu_create: SPU_CREATE_NONSCHED: create a context that is never moved away from an SPE once it has started running. This flag can only be used by tasks with the CAP_SYS_NICE capability. SPU_CREATE_ISOLATED: create a nonschedulable context that enters isolation mode upon first run. This requires the SPU_CREATE_NONSCHED flag. Signed-off-by:
-
Geoff Levand authored
Remove the mostly unused variable isrc from struct spu and a forgotten function declaration. Signed-off-by:
Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by:
-
Masato Noguchi authored
SPRN_SDR1 and the SPE's MFC SDR are hypervisor resources and are not accessible from a logical partition. This change adds an access wrapper. When running on bare H/W, the spufs needs to only set the SPE's MFC SDR to the value of the PPE's SPRN_SDR1 once at SPE initialization, so this change renames mfc_sdr_set() to mfc_sdr_setup() and moves the access of SPRN_SDR1 into the mmio wrapper. It also removes the now unneeded member mfc_sdr_RW from struct spu_priv1_collapsed. Signed-off-by:
Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by:
-
Michael Ellerman authored
It makes for a friendlier API if irq_dispose_mapping(NO_IRQ) is a nop, rather than triggering a WARN_ON. Signed-off-by:
-
Matthew McClintock authored
Fixed some missing files to be deleted when running make clean Signed-off-by:
Matthew McClintock <msm@freescale.com> Signed-off-by:
-
- 24 Oct, 2006 3 commits
-
-
Michael Ellerman authored
Remove the iSeries initrd logic, instead just store the initrd location and size in the device tree so generic code can do the rest for us. The iSeries code had a "feature" which the generic code lacks, ie. if the compressed initrd is bigger than the configured ram disk size, we make the ram disk size bigger. That's bogus, as the compressed size of the initrd tells us nothing about how big the ram disk needs to be. If the ram disk isn't big enough you just need to make CONFIG_BLK_DEV_RAM_SIZE larger. Signed-off-by:
-
Andy Fleming authored
The original problem that inspired this patch was solved quite some time ago (Turning off PCI didn't work), but this patch neatens things up a little (I think), by putting all the PCI stuff inside a single CONFIG_PCI block. It also removes the OF PCI bus matching entries if CONFIG_PCI is off. Signed-off-by: -
Josh Boyer authored
This patch adds the mktree program that is needed to post process zImage wrappers for various PowerPC 4xx boards Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by:
-
- 23 Oct, 2006 3 commits
-
-
Mark A. Greer authored
Provide primitive malloc, free, and realloc functions for bootwrapper. Signed-off-by:
Mark A. Greer <mgreer@mvista.com> Signed-off-by:
-
Mark A. Greer authored
Add serial console support for non-OF systems. There is a generic serial console layer which calls a serial console driver. Included is the serial console driver for the ns16550 class of uarts. Necessary support routines are added as well. Signed-off-by:
-
Mark A. Greer authored
Add the latest version of the flatdevtree code and corresponding glue. A phandle table now tracks values returned by ft_find_device(). The value returned by ft_find_device() is a phandle which is really an index into the phandle table. The phandle table contains the address of the corresponding node. When the flat dt is edited/moved, the node pointers in the phandle table are updated accordingly so no phandles kept by the caller become stale. Signed-off-by:
-
- 18 Oct, 2006 2 commits
-
-
Mark A. Greer authored
More reorganization of the bootwrapper: - Add dtb section to zImage - ft_init now called by platform_init - Pack a flat dt before calling kernel - Remove size parameter from free - printf only calls console_ops.write it its not NULL - Some cleanup Signed-off-by:
-
Paul Mackerras authored
The lazy IRQ disable patch missed a couple of places where the interrupt enable flags need to be restored correctly. First, we weren't restoring the paca->hard_enabled flag on interrupt exit. Instead of saving it on entry, we compute it from the MSR_EE bit in the MSR we are restoring at exit. Secondly, the MMU hash miss code was clearing both paca->soft_enabled and paca->hard_enabled but not restoring them in the case where hash_page was able to resolve the miss from the Linux page tables. Signed-off-by:
-
- 16 Oct, 2006 6 commits
-
-
Geoff Levand authored
Change the powerpc hpte_insert routines now called through ppc_md to static scope. Signed-off-by:
-
David Gibson authored
Apparently we've copied the todc drivers, for various RTCs used in embedded machines from ARCH=ppc to ARCH=powerpc, despite the fact that it's never used in the latter. This patch removes it. If we ever need these drivers (which we probably shouldn't now the RTC class stuff is in), we can transfer them one by one from ARCH=ppc, removing from the hideous abomination which is the todc "infrastructure". Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Olof Johansson authored
Without this patch, on an idle system I get: cpu-power-0:21.638 cpu-power-1:27.102 cpu-power-2:29.343 cpu-power-3:25.784 Total: 103.8W With this patch: cpu-power-0:11.730 cpu-power-1:17.185 cpu-power-2:18.547 cpu-power-3:17.528 Total: 65.0W If I lower HZ to 100, I can get it as low as: cpu-power-0:10.938 cpu-power-1:16.021 cpu-power-2:17.245 cpu-power-3:16.145 Total: 60.2W Another (older) Quad G5 went from 54W to 39W at HZ=250. Coming back out of Deep Nap takes 40-70 cycles longer than coming back from just Nap (which already takes quite a while). I don't think it'll be a performance issue (interrupt latency on an idle system), but in case someone does measurements feel free to report them. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Michael Buesch <mb@bu3sch.de> Signed-off-by:
-
Paul Mackerras authored
This implements a lazy strategy for disabling interrupts. This means that local_irq_disable() et al. just clear the 'interrupts are enabled' flag in the paca. If an interrupt comes along, the interrupt entry code notices that interrupts are supposed to be disabled, and clears the EE bit in SRR1, clears the 'interrupts are hard-enabled' flag in the paca, and returns. This means that interrupts only actually get disabled in the processor when an interrupt comes along. When interrupts are enabled by local_irq_enable() et al., the code sets the interrupts-enabled flag in the paca, and then checks whether interrupts got hard-disabled. If so, it also sets the EE bit in the MSR to hard-enable the interrupts. This has the potential to improve performance, and also makes it easier to make a kernel that can boot on iSeries and on other 64-bit machines, since this lazy-disable strategy is very similar to the soft-disable strategy that iSeries already uses. This version renames paca->proc_enabled to paca->soft_enabled, and changes a couple of soft-disables in the kexec code to hard-disables, which should fix the crash that Michael Ellerman saw. This doesn't yet use a reserved CR field for the soft_enabled and hard_enabled flags. This applies on top of Stephen Rothwell's patches to make it possible to build a combined iSeries/other kernel. Signed-off-by: -
Anton Blanchard authored
During boot we bring up all memory and cpu nodes. Normally a PCI device will be in one of these online nodes, however in some weird setups it may not. We have only seen this in the lab but we may as well check for the case and fallback to -1 (all nodes). Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
Instead of just checking that an address is in the right range, use the provided __kernel_text_address() helper which covers both the kernel and module text sections. Signed-off-by:
-
