Keep the documentation link up-to-date in case anybody need to dive into it
again, and update email address while at it.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The only user of this driver in mainline does not make use of the module
parameters, so let's remove them. All properties for this driver should be
set through DT or pdata.

Use touchscreen_parse_properties() to automatically set some of the common
touchscreen properties and derive the axis inversion through that.

And finally, use touchscreen_report_pos() to handle the DT properties
automatically instead of doing the inversion ourselves.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Provide a match table so that the driver can be used in devicetree setups.
More properties are added in a later patch.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Describe the bindings for EETI touchscreen controllers.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add Rohm BU21029 resistive touch panel controller support with I2C
interface.
Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com>
Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Bring in xen-kbdfront changes.

Call pm_wakeup_event on every interrupt. This should help us in identifying
if keyboard was a potential wake reason for the last resume.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Remove the unnecessary check before calling pm_wakeup_event. If the
device is not wake enabled, this call is no-op anyway.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The license text is specifying "GPLv2" but the MODULE_LICENSE is set to
GPL which means GNU Public License v2 or later. When MODULE_LICENSE and
boiler plate does not match, go for boiler plate license.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

It is now only possible to control if multi-touch virtual device
is created or not (via the corresponding XenStore entries),
but keyboard and pointer devices are always created.
In some cases this is not desirable. For example, if virtual
keyboard device is exposed to Android then the latter won't
automatically show on-screen keyboard as it expects that a
physical keyboard device can be used for typing.

Utilize keyboard and pointer device XenStore feature fields to
configure which virtual devices are created:
 - set "feature-disable-keyboard" to 1 if no keyboard device
   needs to be created
 - set "feature-disable-pointer" to 1 if no pointer device
   needs to be created
Keep old behavior by default.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Suggested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Tested-by: Andrii Chepurnyi <andrii_chepurnyi@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

kbdif protocol describes multi-touch device parameters as a
part of frontend's XenBus configuration nodes while they
belong to backend's configuration. Fix this by reading the
parameters as defined by the protocol.

Fixes: 49aac820 ("Input: xen-kbdfront - add multi-touch support")
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This is the sync up with the canonical definitions of the input,
sound and display protocols in Xen.

Changes to kbdif:
1. Add missing string constants for {feature|request}-raw-pointer
   to align with the rest of the interface file.

2. Add new XenStore feature fields, so it is possible to individually
   control set of exposed virtual devices for each guest OS:
     - set feature-disable-keyboard to 1 if no keyboard device needs
       to be created
     - set feature-disable-pointer to 1 if no pointer device needs
       to be created

3. Move multi-touch device parameters to backend nodes: these are
    described as a part of frontend's XenBus configuration nodes
    while they belong to backend's configuration. Fix this by moving
    the parameters to the proper section.

Unique-id field:
1. Add unique-id XenBus entry for virtual input and display.

2. Change type of unique-id field to string for sndif to align with
display and input protocols.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We allow changing tool type (from MT_TOOL_FINGER to MT_TOOL_PALM) so we
should not be forcing new tracking ID for the slot.
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Let's make input_report_slot_state() return boolean representing whether
the contact is active or not. This will allow writing code like:

	if (input_mt_report_slot_state(input, obj->mt_tool,
					obj->type != RMI_2D_OBJECT_NONE) {

		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}

instead of:

	input_mt_report_slot_state(input, obj->mt_tool,
				   obj->type != RMI_2D_OBJECT_NONE);
	if (obj->type != RMI_2D_OBJECT_NONE) {
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_X, obj->x);
		input_event(sensor->input, EV_ABS, ABS_MT_POSITION_Y, obj->y);
		...
	}
Reviewed-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redaht.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The error return code PTR_ERR(data->irqdomain) is always 0 since
data->irqdomain is equal to NULL in this error handling case.

Fixes: 24d28e4f ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the RMI driver to use the standard mechanism for
distributing IRQs to the various functions.

Tested on:
* S7300 (F11, F34, F54)
* S7817 (F12, F34, F54)
Signed-off-by: Nick Dyer <nick@shmanahar.org>
Acked-by: Christopher Heiny <cheiny@synaptics.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Address issues pointed by checkpatch.pl
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This patch adds the Spreadtrum vibrator driver, which embedded in the
Spreadtrum SC27xx series PMICs.
Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp

Tested on a unit from the first production run sent to Indiegogo backers
Signed-off-by: Ethan Lee <flibitijibibo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull vfs fixes from Al Viro.

 - fix io_destroy()/aio_complete() race

 - the vfs_open() change to get rid of open_check_o_direct() boilerplate
   was nice, but buggy. Al has a patch avoiding a revert, but that's
   definitely not a last-day fodder, so for now revert it is...

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Revert "fs: fold open_check_o_direct into do_dentry_open"
  fix io_destroy()/aio_complete() race

This reverts commit cab64df1.

Having vfs_open() in some cases drop the reference to
struct file combined with

	error = vfs_open(path, f, cred);
	if (error) {
		put_filp(f);
		return ERR_PTR(error);
	}
	return f;

is flat-out wrong.  It used to be

		error = vfs_open(path, f, cred);
		if (!error) {
			/* from now on we need fput() to dispose of f */
			error = open_check_o_direct(f);
			if (error) {
				fput(f);
				f = ERR_PTR(error);
			}
		} else {
			put_filp(f);
			f = ERR_PTR(error);
		}

and sure, having that open_check_o_direct() boilerplate gotten rid of is
nice, but not that way...

Worse, another call chain (via finish_open()) is FUBAR now wrt
FILE_OPENED handling - in that case we get error returned, with file
already hit by fput() *AND* FILE_OPENED not set.  Guess what happens in
path_openat(), when it hits

	if (!(opened & FILE_OPENED)) {
		BUG_ON(!error);
		put_filp(file);
	}

The root cause of all that crap is that the callers of do_dentry_open()
have no way to tell which way did it fail; while that could be fixed up
(by passing something like int *opened to do_dentry_open() and have it
marked if we'd called ->open()), it's probably much too late in the
cycle to do so right now.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull scheduler fixes from Thomas Gleixner:

 - two patches addressing the problem that the scheduler allows under
   certain conditions user space tasks to be scheduled on CPUs which are
   not yet fully booted which causes a few subtle and hard to debug
   issue

 - add a missing runqueue clock update in the deadline scheduler which
   triggers a warning under certain circumstances

 - fix a silly typo in the scheduler header file

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/headers: Fix typo
  sched/deadline: Fix missing clock update
  sched/core: Require cpu_active() in select_task_rq(), for user tasks
  sched/core: Fix rules for running on online && !active CPUs

Pull perf tooling fixes from Thomas Gleixner:

 - fix 'perf test Session topology' segfault on s390 (Thomas Richter)

 - fix NULL return handling in bpf__prepare_load() (YueHaibing)

 - fix indexing on Coresight ETM packet queue decoder (Mathieu Poirier)

 - fix perf.data format description of NRCPUS header (Arnaldo Carvalho
   de Melo)

 - update perf.data documentation section on cpu topology

 - handle uncore event aliases in small groups properly (Kan Liang)

 - add missing perf_sample.addr into python sample dictionary (Leo Yan)

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fix perf.data format description of NRCPUS header
  perf script python: Add addr into perf sample dict
  perf data: Update documentation section on cpu topology
  perf cs-etm: Fix indexing for decoder packet queue
  perf bpf: Fix NULL return handling in bpf__prepare_load()
  perf test: "Session topology" dumps core on s390
  perf parse-events: Handle uncore event aliases in small groups properly

Pull networking fixes from David Miller:

 1) Infinite loop in _decode_session6(), from Eric Dumazet.

 2) Pass correct argument to nla_strlcpy() in netfilter, also from Eric
    Dumazet.

 3) Out of bounds memory access in ipv6 srh code, from Mathieu Xhonneux.

 4) NULL deref in XDP_REDIRECT handling of tun driver, from Toshiaki
    Makita.

 5) Incorrect idr release in cls_flower, from Paul Blakey.

 6) Probe error handling fix in davinci_emac, from Dan Carpenter.

 7) Memory leak in XPS configuration, from Alexander Duyck.

 8) Use after free with cloned sockets in kcm, from Kirill Tkhai.

 9) MTU handling fixes fo ip_tunnel and ip6_tunnel, from Nicolas
    Dichtel.

10) Fix UAPI hole in bpf data structure for 32-bit compat applications,
    from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  bpf: fix uapi hole for 32 bit compat applications
  net: usb: cdc_mbim: add flag FLAG_SEND_ZLP
  ip6_tunnel: remove magic mtu value 0xFFF8
  ip_tunnel: restore binding to ifaces with a large mtu
  net: dsa: b53: Add BCM5389 support
  kcm: Fix use-after-free caused by clonned sockets
  net-sysfs: Fix memory leak in XPS configuration
  ixgbe: fix parsing of TC actions for HW offload
  net: ethernet: davinci_emac: fix error handling in probe()
  net/ncsi: Fix array size in dumpit handler
  cls_flower: Fix incorrect idr release when failing to modify rule
  net/sonic: Use dma_mapping_error()
  xfrm Fix potential error pointer dereference in xfrm_bundle_create.
  vhost_net: flush batched heads before trying to busy polling
  tun: Fix NULL pointer dereference in XDP redirect
  be2net: Fix error detection logic for BE3
  net: qmi_wwan: Add Netgear Aircard 779S
  mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG
  atm: zatm: fix memcmp casting
  iwlwifi: pcie: compare with number of IRQs requested for, not number of CPUs
  ...

Pull SCSI fix from James Bottomley:
 "Eve of merge window fix: The original code was so bogus as to be
  casting the wrong generic device to an rport and proceeding to take
  actions based on the bogus values it found.

  Fortunately it seems the location that is dereferenced always exists,
  so the code hasn't oopsed yet, but it certainly annoys the memory
  checkers"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_transport_srp: Fix shost to rport translation

Pull drm fixes from Dave Airlie:
 "A few final fixes:

  i915:
   - fix for potential Spectre vector in the new query uAPI
   - fix NULL pointer deref (FDO #106559)
   - DMI fix to hide LVDS for Radiant P845 (FDO #105468)

  amdgpu:
   - suspend/resume DC regression fix
   - underscan flicker fix on fiji
   - gamma setting fix after dpms

  omap:
   - fix oops regression

  core:
   - fix PSR timing

  dw-hdmi:
   - fix oops regression"

* tag 'drm-fixes-for-v4.17-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/amd/display: Update color props when modeset is required
  drm/amd/display: Make atomic-check validate underscan changes
  drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense
  drm/amd/display: Fix BUG_ON during CRTC atomic check update
  drm/i915/query: nospec expects no more than an unsigned long
  drm/i915/query: Protect tainted function pointer lookup
  drm/i915/lvds: Move acpi lid notification registration to registration phase
  drm/i915: Disable LVDS on Radiant P845
  drm/omap: fix NULL deref crash with SDI displays
  drm/psr: Fix missed entry in PSR setup time table.

Two last minute DC fixes for 4.17.  A fix for underscan on fiji and
a fix for gamma settings getting after dpms.

* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/display: Update color props when modeset is required
  drm/amd/display: Make atomic-check validate underscan changes

Pull MIPS fixes from James Hogan:
 "A final few MIPS fixes for 4.17:

   - drop Lantiq gphy reboot/remove reset (4.14)

   - prctl(PR_SET_FP_MODE): Disallow PRE without FR (4.0)

   - ptrace(PTRACE_PEEKUSR): Fix 64-bit FGRs (3.15)"

* tag 'mips_fixes_4.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: ptrace: Fix PTRACE_PEEKUSR requests for 64-bit FGRs
  MIPS: prctl: Disallow FRE without FR with PR_SET_FP_MODE requests
  MIPS: lantiq: gphy: Drop reboot/remove reset asserts

Pull VFIO fix from Alex Williamson:
 "Revert a pfn page mapping optimization identified as introducing a bad
  page state regression (Alex Williamson)"

* tag 'vfio-v4.17' of git://github.com/awilliam/linux-vfio:
  Revert "vfio/type1: Improve memory pinning process for raw PFN mapping"

Pull char/misc driver fixes from Greg KH:
 "Here are four small bugfixes for some char/misc drivers. Well, really
  three fixes and one fix for one of those fixes due to problems found
  by 0-day.

  This resolves some reported issues with the hwtracing drivers, and a
  reported regression for the thunderbolt subsystem. All of these have
  been in linux-next for a while now with no reported problems"

* tag 'char-misc-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hwtracing: stm: fix build error on some arches
  intel_th: Use correct device when freeing buffers
  stm class: Use vmalloc for the master map
  thunderbolt: Handle NULL boot ACL entries properly

Pull IIO driver fixes from Greg KH:
 "Here are some old IIO driver fixes that were sitting in my tree for a
  few weeks. Sorry about not getting them to you sooner. They fix a
  number of small IIO driver issues that have been reported.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'staging-4.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: adc: select buffer for at91-sama5d2_adc
  iio: hid-sensor-trigger: Fix sometimes not powering up the sensor after resume
  iio: adc: at91-sama5d2_adc: fix channel configuration for differential channels
  iio:kfifo_buf: check for uint overflow
  iio:buffer: make length types match kfifo types
  iio: adc: stm32-dfsdm: fix sample rate for div2 spi clock
  iio: adc: stm32-dfsdm: fix successive oversampling settings
  iio: ad7793: implement IIO_CHAN_INFO_SAMP_FREQ

Pull rdma fixes from Jason Gunthorpe:
 "Just three small last minute regressions that were found in the last
  week. The Broadcom fix is a bit big for rc7, but since it is fixing
  driver crash regressions that were merged via netdev into rc1, I am
  sending it.

   - bnxt netdev changes merged this cycle caused the bnxt RDMA driver
     to crash under certain situations

   - Arnd found (several, unfortunately) kconfig problems with the
     patches adding INFINIBAND_ADDR_TRANS. Reverting this last part,
     will fix it more fully outside -rc.

   - Subtle change in error code for a uapi function caused breakage in
     userspace. This was bug was subtly introduced cycle"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/core: Fix error code for invalid GID entry
  IB: Revert "remove redundant INFINIBAND kconfig dependencies"
  RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes