- 19 Oct, 2021 10 commits
-
-
Michael Strauss authored
[WHAT] One of the current VPG power on calls is unnecessary Reviewed-by:
Eric Yang <eric.yang2@amd.com> Acked-by:
Agustin Gutierrez Sanchez <agustin.gutierrez@amd.com> Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wenjing Liu authored
[why] Some DP2.0 RX requires us to set MST_EN even for SST configuration. We added this debug option so we can configure this temporary workaround for the RX. Reviewed-by:
George Shen <george.shen@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] When rapidly plugging and unplugging a DP sink, detection link training can be mistakenly skipped. This is due to the hotplug processing occurring before the encoder assignment logic has had a chance to process the removal of a stream. The encoder that would be used for detection link training is then erroneously reported as already in use and detection link training is skipped. [How] During hot plug processing, only determine a link encoder to be unavailable for a particular link if it has been assigned to a different link. Reviewed-by:
Meenakshikumar Somasundaram <Meenakshikumar.Somasundaram@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Tested-by:
-
Jimmy Kizito authored
[Why] When copying a stream, the encoder assigned to it is copied too. Encoder assignment should only happen when executing the encoder assignment function link_encs_assign(). [How] Clear the link encoder pointer for copied stream. Reviewed-by:
-
Jake Wang authored
[Why & How] Disable root clock for dpp when not being used. Reviewed-by:
Jake Wang <haonan.wang2@amd.com> Tested-by:
-
Roman Li authored
[Why] On renoir usb-c port stops functioning on resume after f/w update. New dmub firmware caused regression due to conflict with dmcu. With new dmub f/w dmcu is superseded and should be disabled. [How] - Disable dmcu for all dcn21. Check dmesg for dmub f/w version. The old firmware (before regression): [drm] DMUB hardware initialized: version=0x00000001 All other versions require this patch for renoir. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1735Acked-by:
Harry Wentland <harry.wentland@amd.com> Tested-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Roman Li <Roman.Li@amd.com> Signed-off-by:
-
YuBiao Wang authored
[Why] drm_irq_uninstall is called in irq_fini_hw so that irq is disabled in sw stage. SMU (and maybe other IP blocks) fini_hw will call irq_put for cleanup and the whole cleanup process will be skipped because of drm->irq_enable = false. [How] Move ip_fini_early before irq_fini_hw. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Jonathan Kim authored
ROCr needs to be able to identify all devices that have direct access to fine grain memory, which should include CPUs that are connected to GPUs over xGMI. The GPU hive ID can be mapped onto the CPU hive ID since the CPU is part of the hive. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
Felix Kuehling <felix.kuehling@amd.com> Signed-off-by:
-
Tao Zhou authored
Some registers' access will fail without PSP RL after resume. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Lang Yu authored
We should unreference a gem object instead of an amdgpu bo here. Fixes: fd9a9f88 ("drm/amdgpu: Use GEM obj reference for KFD BOs") Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
-
- 14 Oct, 2021 4 commits
-
-
Alex Deucher authored
Missed a few asics. v2: update comment Fixes: 82d05736 ("drm/amdgpu/amdgpu_psp: convert to IP version checking") Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Alex Deucher authored
VEGA20 is 11.0.2, but it's handled by powerplay, not swsmu. Fixes: a8967967 ("drm/amdgpu/amdgpu_smu: convert to IP version checking") Reviewed-by:
-
Philip Yang authored
When creating unregistered new svm range to recover retry fault, avoid new svm range to overlap with ranges or userptr ranges managed by TTM, otherwise svm migration will trigger TTM or userptr eviction, to evict user queues unexpectedly. Change helper amdgpu_ttm_tt_affect_userptr to return userptr which is inside the range. Add helper svm_range_check_vm_userptr to scan all userptr of the vm, and return overlap userptr bo start, last. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Thelford Williams authored
Size can be any value and is user controlled resulting in overwriting the 40 byte array wr_buf with an arbitrary length of data from buf. Signed-off-by:
Thelford Williams <tdwilliamsiv@gmail.com> Signed-off-by:
-
- 13 Oct, 2021 20 commits
-
-
Alex Deucher authored
Was missed in the conversion to IP version checking. Fixes: af3b89d3 ("drm/amdgpu/smu11.0: convert to IP version checking") Reviewed-by:
-
Harry Wentland authored
He's been helping maintain it for quite a while now. Make it official. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Yifan Zhang authored
When IOMMU disabled in sbios and kfd in iommuv2 path, IOMMU resume failure blocks system resume. Don't allow kfd to use iommu v2 when iommu is disabled. Reported-by:
youling <youling257@gmail.com> Tested-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Yifan Zhang authored
When IOMMU disabled in sbios and kfd in iommuv2 path, iommuv2 init will fail. But this failure should not block amdgpu driver init. Reported-by:
-
Philip Yang authored
migrate_vma_setup may return cpages 0, means 0 page can be migrated, treat this as error case to skip the rest of vma migration steps. Change svm_migrate_vma_to_vram and svm_migrate_vma_to_ram to return the number of pages migrated successfully or error code. The caller add up all the successful migration pages and update prange->actual_loc only if the total migrated pages is not 0. This also removes the warning message "VRAM BO missing during validation" if migration cpages is 0. Signed-off-by:
-
Philip Yang authored
No function change, use pr_debug_ratelimited to avoid per page debug message overflowing dmesg buf and console log. use dev_err to show error message from unexpected situation, to provide clue to help debug without enabling dynamic debug log. Define dev_fmt to output function name in error message. Signed-off-by:
-
Darren Powell authored
when smu->adev->pm.ac_power == 0, message parameter with bit 16 set is saved to smu->current_power_limit. Fixes: 0cb4c621 ("drm/amd/pm: correct power limit setting for SMU V11)" Signed-off-by:
Darren Powell <darren.powell@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Darren Powell authored
v2 add check for SMU_DEFAULT_PPT_LIMIT v1 modify (pptable_funcs)->set_power_limit signature modify smu11 set_power_limit signature (arcturus, navi10, sienna_cichlid) modify smu13 set_power_limit signature (aldabaran) modify vangogh_set_power_limit signature (vangogh) === Test === sudo bash AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_show_power_cap.log cp $LOGFILE{,.old} lspci -nn | grep "VGA\|Display" > $LOGFILE FILES=" power1_cap power2_cap" for f in $FILES do if test -f "$HWMON_DIR/$f"; then echo === $f === >> $LOGFILE cat $HWMON_DIR/$f >> $LOGFILE RESTORE_VALUE=`cat $HWMON_DIR/$f` 2>&1 >> $LOGFILE echo RESTORE_VALUE $RESTORE_VALUE >> $LOGFILE echo 120000000 > $HWMON_DIR/$f sleep 3 cat $HWMON_DIR/$f >> $LOGFILE echo $RESTORE_VALUE > $HWMON_DIR/$f sleep 3 cat $HWMON_DIR/$f >> $LOGFILE else echo === $f === >> $LOGFILE echo File Not Found >> $LOGFILE fi done cat $LOGFILE Signed-off-by: -
Mukul Joshi authored
During mode2 reset, the GPU is temporarily removed from the mgpu_info list. As a result, page retirement fails because it cannot find the GPU in the GPU list. To fix this, create our own list of GPUs that support MCE notifier based page retirement and use that list to check if the UMC error occurred on a GPU that supports MCE notifier based page retirement. Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Reviewed-by:
-
Mukul Joshi authored
Add the missing call to re-enable RAS error injections on the Aldebaran mode2 reset code path. Signed-off-by:
-
Aurabindo Pillai authored
[Why&How] When system boots in headless mode, connecting a 4k display creates a null pointer dereference due to hubp for a certain plane being null. Add a condition to check for null hubp before dereferencing it. Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] DCE legacy optimization path isn't well tested under new DC optimization flow which can result in underflow occuring when initializing X11 on Carrizo. [How] Retain the legacy optimization flow for DCE and keep the new one for DCN to satisfy optimizations being correctly applied for ASIC that can support it. Fixes: 34316c1e ("drm/amd/display: Optimize bandwidth on following fast update") Reported-by:
Tom St Denis <tom.stdenis@amd.com> Tested-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] For optimal power savings on panels that can support it. This was previously left disabled by default because of issues with compositors that do not pageflip and scan out directly to the frontbuffer. For these compositors we now have detection methods that wait for x number of pageflips after a full update - triggered by a buffer or format change typically. This may introduce bugs or new cases not tested by users so this is only currently targeting newer DCN. [How] Add code in DM to set PSR state by default for newer DCN while falling back to the feature mask for older. Add a global debug flag that can be set to disable it for either. Signed-off-by:
-
Lang Yu authored
Display support for cyan skillfish is ready now. Enable it! Signed-off-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
-
Simon Ser authored
The current logic checks whether the cursor plane blending properties match the primary plane's. However that's wrong, because the cursor is painted on all planes underneath. If the cursor is over the primary plane and the overlay plane, it's painted on both pipes. Iterate over the CRTC planes and check their scaling match the cursor's. v4: fix typo in commit message (Harry) Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Alex Sierra authored
svm_range_list svms declaration removed to avoid werror when CONFIG_HSA_AMD_SVM is not enabled. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Reviewed-by:
-
Yifan Zhang authored
[ RUN ] KFDSVMRangeTest.PartialUnmapSysMemTest /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:245: Failure Value of: (hsaKmtAllocMemory(m_Node, m_Size, m_Flags, &m_pBuf)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:248: Failure Value of: (hsaKmtMapMemoryToGPUNodes(m_pBuf, m_Size, __null, mapFlags, 1, &m_Node)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:306: Failure Expected: ((void *)__null) != (ptr), actual: NULL vs NULL Segmentation fault (core dumped) [ ] Profile: Full Test [ ] HW capabilities: 0x9 kernel log: [ 102.029150] ret_from_fork+0x22/0x30 [ 102.029158] ---[ end trace 15c34e782714f9a3 ]--- [ 3613.603598] amdgpu: Address: 0x7f7149ccc000 already allocated by SVM [ 3613.610620] show_signal_msg: 27 callbacks suppressed These is race with deferred actions from previous memory map changes (e.g. munmap).Flush pending deffered work to avoid such case. Signed-off-by:
-
Yifan Zhang authored
export svm_range_list_lock_and_flush_work to make other kfd parts be able to sync svm_range_list. Signed-off-by:
-
Alex Sierra authored
[Why] Avoid conflict with address ranges mapped by SVM mechanism that try to be allocated again through ioctl_alloc in the same process. And viceversa. [How] For ioctl_alloc_memory_of_gpu allocations Check if the address range passed into ioctl memory alloc does not exist already in the kfd_process svms->objects interval tree. For SVM allocations Look for the address range into the interval tree VA from the VM inside of each pdds used in a kfd_process. Signed-off-by:
-
Alex Deucher authored
It's used internally by firmware. Using it in the driver could conflict with firmware. v2: squash in fix for navi1x (Alex) Reviewed-by:
-
- 11 Oct, 2021 6 commits
-
-
Alex Deucher authored
It's used internally by firmware. Using it in the driver could conflict with firmware. Reviewed-by:
-
Lang Yu authored
Query default sclk instead of hard code. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-10-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Add uAPI for using PXP protected objects Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064 - Add PCI IDs and LMEM discovery/placement uAPI for DG1 Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584 - Disable engine bonding on Gen12+ except TGL, RKL and ADL-S Cross-subsystem Changes: - Merges 'tip/locking/wwmutex' branch (core kernel tip) - "mei: pxp: export pavp client to me client bus" Core Changes: - Update ttm_move_memcpy for async use (Thomas) Driver Changes: - Enable GuC submission by default on DG1 (Matt B) - Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele, Sean, Anshuman) See "drm/i915/pxp: add PXP documentation" for details! - Remove force_probe protection for ADL-S (Raviteja) - Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas) - Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko) - Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris) - Implement LMEM backup and restore for suspend / resume (Thomas) - Report INSTDONE_GEOM values in error state for DG2 (Matt R) - Add DG2-specific shadow register table (Matt R) - Update Gen11/Gen12/XeHP shadow register tables (Matt R) - Maintain backward-compatible nested batch behavior on TGL+ (Matt R) - Add new LRI reg offsets for DG2 (Akeem) - Initialize unused MOCS entries to device specific values (Ayaz) - Track and use the correct UC MOCS index on Gen12 (Ayaz) - Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz) - Simplify the locking and eliminate some RCU usage (Daniel) - Add some flushing for the 64K GTT path (Matt A) - Mark GPU wedging on driver unregister unrecoverable (Janusz) - Major rework in the GuC codebase, simplify locking and add docs (Matt B) - Add DG1 GuC/HuC firmwares (Daniele, Matt B) - Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A) - Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R) - Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel) - Fix early tracepoints for requests (Matt A) - Use locked access to ctx->engines in set_priority (Daniel) - Convert gen6/gen7/gen8 read operations to fwtable (Matt R) - Drop gen11/gen12 specific mmio write handlers (Matt R) - Drop gen11 specific mmio read handlers (Matt R) - Use designated initializers for init/exit table (Kees) - Fix syncmap memory leak (Matt B) - Add pretty printing for buddy allocator state debug (Matt A) - Fix potential error pointer dereference in pinned_context() (Dan) - Remove IS_ACTIVE macro (Lucas) - Static code checker fixes (Nathan) - Clean up disabled warnings (Nathan) - Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B) - Ensure wa_init_finish() is called for ctx workaround list (Matt R) - Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram) - Get PM ref before accessing HW register (Vinay) - Move __i915_gem_free_object to ttm_bo_destroy (Maarten) - Deduplicate frequency dump on debugfs (Lucas) - Make wa list per-gt (Venkata) - Do not define dummy vma in stack (Venkata) - Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas) - Do not report currently active engine when describing objects (Tvrtko) - Fix pdfdocs build error by removing nested grid from GuC docs (Akira) - Remove false warning from the rps worker (Tejas) - Flush buffer pools on driver remove (Janusz) - Fix runtime pm handling in i915_gem_shrink (Maarten) - Rework TTM object initialization slightly (Thomas) - Use fixed offset for PTEs location (Michal Wa) - Verify result from CTB (de)register action and improve error messages (Michal Wa) - Fix bug in user proto-context creation that leaked contexts (Matt B) - Re-use Gen11 forcewake read functions on Gen12 (Matt R) - Make shadow tables range-based (Matt R) - Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten) - Use NULL instead of 0 where appropriate (Ville) - Rename pci/debugfs functions to respect file prefix (Jani, Lucas) - Drop guc_communication_enabled (Daniele) - Selftest fixes (Thomas, Daniel, Matt A, Maarten) - Clean up inconsistent indenting (Colin) - Use direction definition DMA_BIDIRECTIONAL instead of PCI_DMA_BIDIRECTIONAL (Cai) - Add "intel_" as prefix in set_mocs_index() (Ayaz) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.comSigned-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - fbdev/efifb: Release PCI device's runtime PM ref during FB destr\ oy (Imre) i915 Core Driver Changes: - Only access SFC_DONE in media when not fused off for graphics 12 and newer. - Double Memory latency values from pcode for DG2 (Matt Roper) - ADL-S PCI ID update (Tejas) - New DG1 PCI ID (Jose) - Fix regression with uncore refactoring (Dave) i915 Display Changes: - ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita) - DG2 display fixes (Ankit, Jani) - Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman) - General display simplifications and clean-ups (Jani, Swati, Jose, Ville) - PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong) - Nuke ORIGIN_GTT (Jose) - Return proper DPRX link training result (Lee) - FBC related refactor and fixes (Ville) - Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng) - DP 2.0 preparation work (Jani) - Silence __iomem sparse warn (Ville) - Clean up DPLL stuff (Ville) - Fix various dp/edp max rates (Matt Atwood, Animesh, Jani) - Remove VBT ddi_port_info caching (Jani) - DSI driver improvements (Lee) - HDCP fixes (Juston) - Associate ACPI connector nodes with connector entries (Heikki) - Add support for out-of-bound hotplug events (Hans) - VESA vendor block and drm/i915 MSO use of it (Jani) - Fixes for bigjoiner (Ville) - Update memory bandwidth parameters (RK) - DMC related fixes (Chris, Jose) - HDR related fixes and improvements (Tejas) - g4x/vlv/chv CxSR/wm fixes/cleanups (Ville) - Use BIOS provided value for RKL Audio's HDA link (Kai-Heng) - Fix the dsc check while selecting min_cdclk (Vandita) - Split and constify vtable (Dave) - Add ww context to intel_dpt_pin (Maarten) - Fix bdb version check (Lukasz) - DP per-lane drive settings prep work and other DP fixes (Ville) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.16: UAPI Changes: - Allow empty drm leases for creating separate GEM namespaces. Cross-subsystem Changes: - Slightly rework dma_buf_poll. - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside the lockless dma-resv functions. Core Changes: - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing. - Add more DP2 headers. - fix CONFIG_FB dependency in fb_helper. - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888. - Fix crash on a 0 or invalid EDID. Driver Changes: - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN. - Add mode_valid to ti-sn65dsi86 bridge. - Support multiple syncobjs in v3d. - Add R8, RGB332 and RGB888 pixel formats to GUD. - Use devm_add_action_or_reset in dw-hdmi-cec. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.16-2021-10-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.16-2021-10-08: amdgpu: - gart BO pin count fix - RAS fixes - Misc display fixes - Misc code cleanups - Validate IP discovery table - IOMMU handling fixes for hotplug - Cyan Skillfish display support - DP 2.0 fixes - Covert vega and navi to IP discovery based asic enumeration - JPEG fixes - More FP cleanup for display - DCC fixes for DCN3.x - Initial USB4 DP tunnelling support - Aldebaran MCE support amdkfd: - Misc bug fixes - Misc code cleanups - RAS fixes x86/MCE: - Export symbol for use by GPU driver Signed-off-by:
-
