- 26 Feb, 2013 6 commits
-
-
Qu Wenruo authored
Though most of the btrfs codes are using ALIGN macro for page alignment, there are still some codes using open-coded alignment like the following: ------ u64 mask = ((u64)root->stripesize - 1); u64 ret = (val + mask) & ~mask; ------ Or even hidden one: ------ num_bytes = (end - start + blocksize) & ~(blocksize - 1); ------ Sometimes these open-coded alignment is not so easy to understand for newbie like me. This commit changes the open-coded alignment to the ALIGN macro for a better readability. Also there is a previous patch from David Sterba with similar changes, but the patch is for 3.2 kernel and seems not merged. http://www.spinics.net/lists/linux-btrfs/msg12747.html Cc: David Sterba <dave@jikos.cz> Signed-off-by:Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com>
-
Liu Bo authored
Before we forced to change a file's NOCOW and COMPRESS flag due to the parent directory's, but this ends up a bad idea, because it confuses end users a lot about file's NOCOW status, eg. if someone change a file to NOCOW via 'chattr' and then rename it in the current directory which is without NOCOW attribute, the file will lose the NOCOW flag silently. This diables 'change flags in rename', so from now on we'll only inherit flags from the parent directory on creation stage while in other places we can use 'chattr' to set NOCOW or COMPRESS flags. Reported-by:
Marios Titas <redneb8888@gmail.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Liu Bo authored
While inserting dir index and updating inode for a snapshot, we'd add delayed items which consume trans->block_rsv, if we don't have any space reserved in this trans handle, we either just return or reserve space again. But before creating pending snapshots during committing transaction, we've done a release on this trans handle, so we don't have space reserved in it at this stage. What we're using is block_rsv of pending snapshots which has already reserved well enough space for both inserting dir index and updating inode, so we need to set trans handle to indicate that we have space now. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Alexandre Oliva authored
I've experienced filesystem freezes with permanent spikes in the active process count for quite a while, particularly on filesystems whose available raw space has already been fully allocated to chunks. While looking into this, I found a pretty obvious error in do_chunk_alloc: it sets space_info->chunk_alloc, but if btrfs_alloc_chunk returns an error other than ENOSPC, it returns leaving that flag set, which causes any other threads waiting for space_info->chunk_alloc to become zero to spin indefinitely. I haven't double-checked that this patch fixes the failure I've observed fully (it's not exactly trivial to trigger), but it surely is a bug and the fix is trivial, so... Please put it in :-) What I saw in that function also happens to explain why in some cases I see filesystems allocate a huge number of chunks that remain unused (leading to the scenario above, of not having more chunks to allocate). It happens for data and metadata, but not necessarily both. I'm guessing some thread sets the force_alloc flag on the corresponding space_info, and then several threads trying to get disk space end up attempting to allocate a new chunk concurrently. All of them will see the force_alloc flag and bump their local copy of force up to the level they see first, and they won't clear it even if another thread succeeds in allocating a chunk, thus clearing the force flag. Then each thread that observed the force flag will, on its turn, force the allocation of a new chunk. And any threads that come in while it does that will see the force flag still set and pick it up, and so on. This sounds like a problem to me, but... what should the correct behavior be? Clear force_flag once we copy it to a local force? Reset force to the incoming value on every loop? Set the flag to our incoming force if we have it at first, clear our local flag, and move it from the space_info when we determined that we are the thread that's going to perform the allocation? btrfs: clear chunk_alloc flag on retryable failure From: Alexandre Oliva <oliva@gnu.org> If btrfs_alloc_chunk fails with e.g. ENOMEM, we exit do_chunk_alloc without clearing chunk_alloc in space_info. As a result, any further calls to do_chunk_alloc on that filesystem will start busy-waiting for chunk_alloc to be cleared, but it never will be. This patch adjusts do_chunk_alloc so that it clears this flag in case of an error. Signed-off-by:
Alexandre Oliva <oliva@gnu.org> Signed-off-by:
-
Jan Schmidt authored
When a subvolume is removed, we remove the root item from the root tree, while the tree blocks and backrefs remain for a while. When backref walking comes across one of those orphan tree blocks, it can find a backref for a no longer existing root. This is all good, we only must tolerate __resolve_indirect_ref returning an error and continue with the good refs found. Reported-by:
Alex Lyakas <alex.btrfs@zadarastorage.com> Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
-
Josef Bacik authored
A user reported hitting the BUG_ON() in btrfs_finished_ordered_io() where we had csums on a NOCOW extent. This can happen if we have NODATACOW set but not NODATASUM set, which can happen in two cases, either we mount with -o nodatacow and then write into preallocated space, or chattr +C a directory and move a file into that directory. Liu has fixed the move case in a different place, but this fixes the mount -o nodatacow case. Thanks, Signed-off-by:
-
- 21 Feb, 2013 2 commits
-
-
Miao Xie authored
If we remount the fs to close the auto defragment or make the fs R/O, we should stop the auto defragment. Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Miao Xie authored
When running the 083th case of xfstests on the filesystem with "compress-force=lzo", the following WARNINGs were triggered. WARNING: at fs/btrfs/inode.c:7908 WARNING: at fs/btrfs/inode.c:7909 WARNING: at fs/btrfs/inode.c:7911 WARNING: at fs/btrfs/extent-tree.c:4510 WARNING: at fs/btrfs/extent-tree.c:4511 This problem was introduced by the patch "Btrfs: fix deadlock due to unsubmitted". In this patch, there are two bugs which caused the above problem. The 1st one is a off-by-one bug, if the DIO write return 0, it is also a short write, we need release the reserved space for it. But we didn't do it in that patch. Fix it by change "ret > 0" to "ret >= 0". The 2nd one is ->outstanding_extents was increased twice when a short write happened. As we know, ->outstanding_extents is a counter to keep track of the number of extent items we may use duo to delalloc, when we reserve the free space for a delalloc write, we assume that the write will introduce just one extent item, so we increase ->outstanding_extents by 1 at that time. And then we will increase it every time we split the write, it is done at the beginning of btrfs_get_blocks_direct(). So when a short write happens, we needn't increase ->outstanding_extents again. But this patch done. In order to fix the 2nd problem, I re-write the logic for ->outstanding_extents operation. We don't increase it at the beginning of btrfs_get_blocks_direct(), instead, we just increase it when the split actually happens. Reported-by:
Mitch Harder <mitch.harder@sabayonlinux.org> Signed-off-by:
-
- 20 Feb, 2013 32 commits
-
-
Liu Bo authored
This comes from one of btrfs's project ideas, As we defragment files, we break any sharing from other snapshots. The balancing code will preserve the sharing, and defrag needs to grow this as well. Now we're able to fill the blank with this patch, in which we make full use of backref walking stuff. Here is the basic idea, o set the writeback ranges started by defragment with flag EXTENT_DEFRAG o at endio, after we finish updating fs tree, we use backref walking to find all parents of the ranges and re-link them with the new COWed file layout by adding corresponding backrefs. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
-
Chris Mason authored
We try to limit the size of a chunk to 10GB, which keeps the unit of work reasonable during balance and resize operations. The limit checks were taking into account the number of copies of the data we had but what they really should be doing is comparing against the logical size of the chunk we're creating. This moves the code around a little to use the count of data stripes from raid5/6. Signed-off-by: -
Zach Brown authored
Very large fallocate requests are cpu bound and result in extents with a repeating pattern of ever decreasing size: $ time fallocate -l 1T file real 0m13.039s ( an excerpt of the extents from btrfs-debug-tree: ) prealloc data disk byte 1536292564992 nr 397312 prealloc data disk byte 1536292962304 nr 196608 prealloc data disk byte 1536293158912 nr 98304 prealloc data disk byte 1536293257216 nr 49152 prealloc data disk byte 1536293306368 nr 24576 prealloc data disk byte 1536293330944 nr 12288 prealloc data disk byte 1536293343232 nr 8192 prealloc data disk byte 1536293351424 nr 4096 prealloc data disk byte 1536293355520 nr 4096 prealloc data disk byte 1536293359616 nr 4096 The excessive cpu use comes from __btrfs_prealloc_file_range() trying to allocate the entire remaining size after each extent is allocated. btrfs_reserve_extent() repeatedly cuts this requested size in half until it gets down to the size that the allocators can return. We limit the problem for now by capping each reservation at 256 meg. The small extents come from a masking bug when decreasing the requested reservation size. The high 32bits are cleared and the remaining low bits might happen to reserve a small size. Fix this by using round_down() which properly casts the mask. After these fixes huge fallocate requests are fast and result in nice large extents: $ time fallocate -l 1T file real 0m0.082s prealloc data disk byte 1112425889792 nr 268435456 prealloc data disk byte 1112694325248 nr 268435456 prealloc data disk byte 1112962760704 nr 268435456 Reported-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Zach Brown <zab@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
__btrfs_close_devices() clones btrfs device structs with memcpy(). Some of the fields in the clone are reinitialized, but it's missing to init io_lock. In mainline this goes unnoticed, but on RT it leaves the plist pointing to the original about to be freed lock struct. Initialize io_lock after cloning, so no references to the original struct are left. Reported-and-tested-by:
Mike Galbraith <efault@gmx.de> Cc: stable@vger.kernel.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chris Mason authored
Signed-off-by: -
Chris Mason authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/josef/btrfs-next into for-linus-3.9 Signed-off-by:
-
Miao Xie authored
We forget to free qgroup reservation in commit_transaction(),fix it. Signed-off-by:
Wang Shilong <wangsl-fnst@cn.fujitsu.com> Cc: Arne Jansen <sensille@gmx.net> Signed-off-by:
-
Wang Shilong authored
The original code forget to check whether quota has been disabled firstly, and it will return 'EINVAL' and return error to users if quota has been disabled,it will be unfriendly and confusing for users to see that. So just return directly if quota has been disabled. Signed-off-by:
-
Liu Bo authored
Right now inode cache inode is treated as the same as space cache inode, ie. keep inode in memory till putting super. But this leads to an awkward situation. If we're going to delete a snapshot/subvolume, btrfs will not actually delete it and return free space, but will add it to dead roots list until the last inode on this snap/subvol being destroyed. Then we'll fetch deleted roots and cleanup them via cleaner thread. So here is the problem, if we enable inode cache option, each snap/subvol has a cached inode which is used to store inode allcation information. And this cache inode will be kept in memory, as the above said. So with inode cache, snap/subvol can only be added into dead roots list during freeing roots stage in umount, so that we can ONLY get space back after another remount(we cleanup dead roots on mount). But the real thing is we'll no more use the snap/subvol if we mark it deleted, so we can safely iput its cache inode when we delete snap/subvol. Another thing is that we need to change the rules of droping inode, we don't keep snap/subvol's cache inode in memory till end so that we can add snap/subvol into dead roots list in time. Reported-by:
-
Miao Xie authored
In some cases, we need commit the current transaction, but don't want to start a new one if there is no running transaction, so we introduce the function - btrfs_attach_transaction(), which can catch the current transaction, and return -ENOENT if there is no running transaction. But no running transaction doesn't mean the current transction completely, because we removed the running transaction before it completes. In some cases, it doesn't matter. But in some special cases, such as freeze fs, we hope the transaction is fully on disk, it will introduce some bugs, for example, we may feeze the fs and dump the data in the disk, if the transction doesn't complete, we would dump inconsistent data. So we need fix the above problem for those cases. We fixes this problem by introducing a function: btrfs_attach_transaction_barrier() if we hope all the transaction is fully on the disk, even they are not running, we can use this function. Signed-off-by:
-
Miao Xie authored
Now btrfs_commit_transaction() does this ret = btrfs_run_ordered_operations(root, 0) which async flushes all inodes on the ordered operations list, it introduced a deadlock that transaction-start task, transaction-commit task and the flush workers waited for each other. (See the following URL to get the detail http://marc.info/?l=linux-btrfs&m=136070705732646&w=2) As we know, if ->in_commit is set, it means someone is committing the current transaction, we should not try to join it if we are not JOIN or JOIN_NOLOCK, wait is the best choice for it. In this way, we can avoid the above problem. In this way, there is another benefit: there is no new transaction handle to block the transaction which is on the way of commit, once we set ->in_commit. Signed-off-by:
-
Miao Xie authored
In start_transactio(), we will try to join the transaction again after the current transaction is committed, so we should not release the reserved space of the qgroup. Fix it. Cc: Arne Jansen <sensille@gmx.net> Signed-off-by:
-
Zach Brown authored
super.magic is an le64 but it's treated as an unterminated string when compared against BTRFS_MAGIC which is defined as a string. Instead define BTRFS_MAGIC as a normal hex value and use endian helpers to compare it to the super's magic. I tested this by mounting an fs made before the change and made sure that it didn't introduce sparse errors. This matches a similar cleanup that is pending in btrfs-progs. David Sterba pointed out that we should fix the kernel side as well :). Signed-off-by:
-
jeff.liu authored
With this new ioctl(2) BTRFS_IOC_SET_FSLABEL, we can set/change the label of a mounted file system. Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
Goffredo Baroncelli <kreijack@inwind.it> Reviewed-by:
-
jeff.liu authored
Add a new ioctl(2) BTRFS_IOC_GET_FSLABLE, so that we can get the label upon a mounted filesystem. Signed-off-by:
-
Josef Bacik authored
Miao made the ordered operations stuff run async, which introduced a deadlock where we could get somebody (sync) racing in and committing the transaction while a commit was already happening. The new committer would try and flush ordered operations which would hang waiting for the commit to finish because it is done asynchronously and no longer inherits the callers trans handle. To fix this we need to make the ordered operations list a per transaction list. We can get new inodes added to the ordered operation list by truncating them and then having another process writing to them, so this makes it so that anybody trying to add an ordered operation _must_ start a transaction in order to add itself to the list, which will keep new inodes from getting added to the ordered operations list after we start committing. This should fix the deadlock and also keeps us from doing a lot more work than we need to during commit. Thanks, Signed-off-by: -
Josef Bacik authored
Dave pointed out that xfstests 273 will tell you that it failed to load the space cache for a block group when it remounts. This is because we run out of space writing out the block group cache. This is ok and is working as it should, but let's try to be a bit nicer. This happens because the block group was 100mb, but bitmap entries cover 128mb, so we were only getting extent entries for this block group, which ended up being too many to fit in the free space cache. So relax the bitmap size requirements to block groups that are at least half the size a bitmap will cover or larger, that way we can still keep the amount of space used in the free space cache low enough to be able to write it out. With this patch I no longer fail to write out the free space cache. Thanks, Reported-by:
-
Ilya Dryomov authored
Enhance balance usage filter by making it possible to balance out only completely empty chunks. Today, usage filter properly acts on values from 1 to 99 inclusive, usage=100 selects all chunks, and usage=0 selects no chunks. This commit changes the usage=0 case: the new meaning is to restripe only completely empty chunks and nothing else. Suggested-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
Commit 5af3e8cc introduced a use-after-free at volumes.c:3139: bctl is freed above in __cancel_balance() in all cases except for balance pause. Fix this by moving the offending check a couple statements above, the meaning of the check is preserved. Reported-by:
-
Josef Bacik authored
Nobody uses these io tree ops anymore so just remove them and clean up the code a bit. Thanks, Signed-off-by: -
David Sterba authored
The defrag operation can take very long, we want to have a way how to cancel it. The code checks for a pending signal at safe points in the defrag loops and returns EAGAIN. This means a user can press ^C after running 'btrfs fi defrag', woks for both defrag modes, files and root. Returning from the command was instant in my light tests, but may take longer depending on the aging factor of the filesystem. Signed-off-by:
-
David Sterba authored
The warning in use_block_rsv is not useful for users and may fill the logs unnecessarily. Signed-off-by:
-
Miao Xie authored
This idea is from ext4. By this patch, we can make the dio write parallel, and improve the performance. But because we can not update isize without i_mutex, the unlocked dio write just can be done in front of the EOF. We needn't worry about the race between dio write and truncate, because the truncate need wait untill all the dio write end. And we also needn't worry about the race between dio write and punch hole, because we have extent lock to protect our operation. I ran fio to test the performance of this feature. == Hardware == CPU: Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz Mem: 2GB SSD: Intel X25-M 120GB (Test Partition: 60GB) == config file == [global] ioengine=psync direct=1 bs=4k size=32G runtime=60 directory=/mnt/btrfs/ filename=testfile group_reporting thread [file1] numjobs=1 # 2 4 rw=randwrite == result (KBps) == write 1 2 4 lock 24936 24738 24726 nolock 24962 30866 32101 == result (iops) == write 1 2 4 lock 6234 6184 6181 nolock 6240 7716 8025 Signed-off-by:
-
Miao Xie authored
Currently, we can do unlocked dio reads, but the following race is possible: dio_read_task truncate_task ->btrfs_setattr() ->btrfs_direct_IO ->__blockdev_direct_IO ->btrfs_get_block ->btrfs_truncate() #alloc truncated blocks #to other inode ->submit_io() #INFORMATION LEAK In order to avoid this problem, we must serialize unlocked dio reads with truncate. There are two approaches: - use extent lock to protect the extent that we truncate - use inode_dio_wait() to make sure the truncating task will wait for the read DIO. If we use the 1st one, we will meet the endless truncation problem due to the nonlocked read DIO after we implement the nonlocked write DIO. It is because we still need invoke inode_dio_wait() avoid the race between write DIO and truncation. By that time, we have to introduce btrfs_inode_{block, resume}_nolock_dio() again. That is we have to implement this patch again, so I choose the 2nd way to fix the problem. Signed-off-by: -
Miao Xie authored
The deadlock problem happened when running fsstress(a test program in LTP). Steps to reproduce: # mkfs.btrfs -b 100M <partition> # mount <partition> <mnt> # <Path>/fsstress -p 3 -n 10000000 -d <mnt> The reason is: btrfs_direct_IO() |->do_direct_IO() |->get_page() |->get_blocks() | |->btrfs_delalloc_resereve_space() | |->btrfs_add_ordered_extent() ------- Add a new ordered extent |->dio_send_cur_page(page0) -------------- We didn't submit bio here |->get_page() |->get_blocks() |->btrfs_delalloc_resereve_space() |->flush_space() |->btrfs_start_ordered_extent() |->wait_event() ---------- Wait the completion of the ordered extent that is mentioned above But because we didn't submit the bio that is mentioned above, the ordered extent can not complete, we would wait for its completion forever. There are two methods which can fix this deadlock problem: 1. submit the bio before we invoke get_blocks() 2. reserve the space before we do dio Though the 1st is the simplest way, we need modify the code of VFS, and it is likely to break contiguous requests, and introduce performance regression for the other filesystems. So we have to choose the 2nd way. Signed-off-by: -
Josef Bacik authored
I noticed we were getting lots of warnings with xfstest 83 because we have reservations outstanding. This is because we moved the orphan add outside of the truncate, but we don't actually cleanup our reservation if something fails. This fixes the problem and I no longer see warnings. Thanks, Signed-off-by: -
Josef Bacik authored
Sometimes xfstest 83 will fail to remount the scratch device because we've gotten ourselves so full that we cannot cleanup the orphan items. In this case check to see if we're doing the orphan cleanup and if we are allow us to steal our reservation from the global block rsv. With this patch I've not been able to reproduce the failed mount problem. Thanks, Signed-off-by: -
Miao Xie authored
The argument "inherit" of btrfs_ioctl_snap_create_transid() was assigned to NULL during we created the snapshots, so we didn't free it though we called kfree() in the caller. But since we are sure the snapshot creation is done after the function - btrfs_ioctl_snap_create_transid() - completes, it is safe that we don't assign the pointer "inherit" to NULL, and just free it in the caller of btrfs_ioctl_snap_create_transid(). In this way, the code can become more readable. Reported-by:
-
Miao Xie authored
open_ctree() need read the metadata to initialize the global information of btrfs. But it may fail after it submit some bio, and then it will jump to the error path. Unfortunately, it doesn't check if there are some bios in flight, and just stop all the worker threads. As a result, when the submitted bios end, they can not find any worker thread which can deal with subsequent work, then oops happen. kernel BUG at fs/btrfs/async-thread.c:605! Fix this problem by invoking invalidate_inode_pages2() before we stop the worker threads. This function will wait until the bio end because it need lock the pages which are going to be invalidated, and if a page is under disk read IO, it must be locked. invalidate_inode_pages2() need wait until end bio handler to unlocked it. Reported-and-Tested-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by:
-
Mark Fasheh authored
This patch adds the flag, BTRFS_SEND_FLAG_NO_FILE_DATA to the btrfs send ioctl code. When this flag is set, the btrfs send code will never write file data into the stream (thus also avoiding expensive reads of that data in the first place). BTRFS_SEND_C_UPDATE_EXTENT commands will be sent (instead of BTRFS_SEND_C_WRITE) with an offset, length pair indicating the extent in question. This patch does not affect the operation of BTRFS_SEND_C_CLONE commands - they will continue to be sent when a search finds an appropriate extent to clone from. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Liu Bo authored
For write, we also reserve some space for COW blocks during updating the checksum tree, and we calculate the number of blocks by checking if the number of bytes outstanding that are going to need csums needs one more block for csum. When we add these checksum into the checksum tree, we use ordered sums list. Every ordered sum contains csums for each sector, and we'll first try to look up an existing csum item, a) if we don't yet have a proper csum item, then we need to insert one, b) or if we find one but the csum item is not big enough, then we need to extend it. The point is we'll unlock the whole path and then insert or extend. So others can hack in and update the tree. Each insert or extend needs update the tree with COW on, and we may need to insert/extend for many times. That means what we've reserved for updating checksum tree is NOT enough indeed. The case is even more serious with having several write threads at the same time, it can end up eating our reserved space quickly and starting eating globle reserve pool instead. I don't yet come up with a way to calculate the worse case for updating csum, but extending the checksum item as much as possible can be helpful in my test. The idea behind is that it can reduce the times we insert/extend so that it saves us precious reserved space. Signed-off-by:
-
Eric Sandeen authored
The entry point at the defrag ioctl always sets "cache only" to 0; the codepaths haven't run for a long time as far as I can tell. Chris says they're dead code, so remove them. Signed-off-by:
-
