- 15 Feb, 2023 6 commits
-
-
Jakub Kicinski authored
lianhui reports that when MPLS fails to register the sysctl table under new location (during device rename) the old pointers won't get overwritten and may be freed again (double free). Handle this gracefully. The best option would be unregistering the MPLS from the device completely on failure, but unfortunately mpls_ifdown() can fail. So failing fully is also unreliable. Another option is to register the new table first then only remove old one if the new one succeeds. That requires more code, changes order of notifications and two tables may be visible at the same time. sysctl point is not used in the rest of the code - set to NULL on failures and skip unregister if already NULL. Reported-by:
lianhui tang <bluetlh@gmail.com> Fixes: 0fae3bf0 ("mpls: handle device renames for per-device sysctls") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pedro Tammela authored
Syzkaller found an issue where a handle greater than 16 bits would trigger a null-ptr-deref in the imperfect hash area update. general protection fault, probably for non-canonical address 0xdffffc0000000015: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] CPU: 0 PID: 5070 Comm: syz-executor456 Not tainted 6.2.0-rc7-syzkaller-00112-gc68f345b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 RIP: 0010:tcindex_set_parms+0x1a6a/0x2990 net/sched/cls_tcindex.c:509 Code: 01 e9 e9 fe ff ff 4c 8b bd 28 fe ff ff e8 0e 57 7d f9 48 8d bb a8 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 94 0c 00 00 48 8b 85 f8 fd ff ff 48 8b 9b a8 00 RSP: 0018:ffffc90003d3ef88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000015 RSI: ffffffff8803a102 RDI: 00000000000000a8 RBP: ffffc90003d3f1d8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88801e2b10a8 R13: dffffc0000000000 R14: 0000000000030000 R15: ffff888017b3be00 FS: 00005555569af300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056041c6d2000 CR3: 000000002bfca000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcindex_change+0x1ea/0x320 net/sched/cls_tcindex.c:572 tc_new_tfilter+0x96e/0x2220 net/sched/cls_api.c:2155 rtnetlink_rcv_msg+0x959/0xca0 net/core/rtnetlink.c:6132 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2574 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x91b/0xe10 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 ____sys_sendmsg+0x334/0x8c0 net/socket.c:2476 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2530 __sys_sendmmsg+0x18f/0x460 net/socket.c:2616 __do_sys_sendmmsg net/socket.c:2645 [inline] __se_sys_sendmmsg net/socket.c:2642 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2642 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 Fixes: ee059170 ("net/sched: tcindex: update imperfect hash filters respecting rcu") Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tung Nguyen authored
When sending a SYN message, this kernel stack trace is observed: ... [ 13.396352] RIP: 0010:_copy_from_iter+0xb4/0x550 ... [ 13.398494] Call Trace: [ 13.398630] <TASK> [ 13.398630] ? __alloc_skb+0xed/0x1a0 [ 13.398630] tipc_msg_build+0x12c/0x670 [tipc] [ 13.398630] ? shmem_add_to_page_cache.isra.71+0x151/0x290 [ 13.398630] __tipc_sendmsg+0x2d1/0x710 [tipc] [ 13.398630] ? tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __local_bh_enable_ip+0x37/0x80 [ 13.398630] tipc_connect+0x1d9/0x230 [tipc] [ 13.398630] ? __sys_connect+0x9f/0xd0 [ 13.398630] __sys_connect+0x9f/0xd0 [ 13.398630] ? preempt_count_add+0x4d/0xa0 [ 13.398630] ? fpregs_assert_state_consistent+0x22/0x50 [ 13.398630] __x64_sys_connect+0x16/0x20 [ 13.398630] do_syscall_64+0x42/0x90 [ 13.398630] entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because commit a41dad90 ("iov_iter: saner checks for attempt to copy to/from iterator") has introduced sanity check for copying from/to iov iterator. Lacking of copy direction from the iterator viewpoint would lead to kernel stack trace like above. This commit fixes this issue by initializing the iov iterator with the correct copy direction when sending SYN or ACK without data. Fixes: f25dcc76 ("tipc: tipc ->sendmsg() conversion") Reported-by: syzbot+d43608d061e8847ec9f3@syzkaller.appspotmail.com Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20230214012606.5804-1-tung.q.nguyen@dektech.com.auSigned-off-by:
-
Miroslav Lichvar authored
Fix handling of the tsync interrupt to compare the pin number with IGB_N_SDP instead of IGB_N_EXTTS/IGB_N_PEROUT and fix the indexing to the perout array. Fixes: cf99c1dd ("igb: move PEROUT and EXTTS isr logic to separate functions") Reported-by:
Matt Corallo <ntp-lists@mattcorallo.com> Signed-off-by:
Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230213185822.3960072-1-anthony.l.nguyen@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-02-13 (ice) This series contains updates to ice driver only. Michal fixes check of scheduling node weight and priority to be done against desired value, not current value. Jesse adds setting of all multicast when adding promiscuous mode to resolve traffic being lost due to filter settings. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: fix lost multicast packets in promisc mode ice: Fix check for weight and priority of a scheduling node ==================== Link: https://lore.kernel.org/r/20230213185259.3959224-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Eric Dumazet authored
syzbot found arm64 builds would crash in sock_recv_mark() when CONFIG_HARDENED_USERCOPY=y x86 and powerpc are not detecting the issue because they define user_access_begin. This will be handled in a different patch, because a check_object_size() is missing. Only data from skb->cb[] can be copied directly to/from user space, as explained in commit 79a8a642 ("net: Whitelist the skbuff_head_cache "cb" field") syzbot report was: usercopy: Kernel memory exposure attempt detected from SLUB object 'skbuff_head_cache' (offset 168, size 4)! ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:102 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 4410 Comm: syz-executor533 Not tainted 6.2.0-rc7-syzkaller-17907-g2d3827b3f393 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:90 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:90 sp : ffff80000fb9b9a0 x29: ffff80000fb9b9b0 x28: ffff0000c6073400 x27: 0000000020001a00 x26: 0000000000000014 x25: ffff80000cf52000 x24: fffffc0000000000 x23: 05ffc00000000200 x22: fffffc000324bf80 x21: ffff0000c92fe1a8 x20: 0000000000000001 x19: 0000000000000004 x18: 0000000000000000 x17: 656a626f2042554c x16: ffff0000c6073dd0 x15: ffff80000dbd2118 x14: ffff0000c6073400 x13: 00000000ffffffff x12: ffff0000c6073400 x11: ff808000081bbb4c x10: 0000000000000000 x9 : 7b0572d7cc0ccf00 x8 : 7b0572d7cc0ccf00 x7 : ffff80000bf650d4 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefbff08 x1 : 0000000100000000 x0 : 000000000000006c Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:90 __check_heap_object+0xa8/0x100 mm/slub.c:4761 check_heap_object mm/usercopy.c:196 [inline] __check_object_size+0x208/0x6b8 mm/usercopy.c:251 check_object_size include/linux/thread_info.h:199 [inline] __copy_to_user include/linux/uaccess.h:115 [inline] put_cmsg+0x408/0x464 net/core/scm.c:238 sock_recv_mark net/socket.c:975 [inline] __sock_recv_cmsgs+0x1fc/0x248 net/socket.c:984 sock_recv_cmsgs include/net/sock.h:2728 [inline] packet_recvmsg+0x2d8/0x678 net/packet/af_packet.c:3482 ____sys_recvmsg+0x110/0x3a0 ___sys_recvmsg net/socket.c:2737 [inline] __sys_recvmsg+0x194/0x210 net/socket.c:2767 __do_sys_recvmsg net/socket.c:2777 [inline] __se_sys_recvmsg net/socket.c:2774 [inline] __arm64_sys_recvmsg+0x2c/0x3c net/socket.c:2774 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x64/0x178 arch/arm64/kernel/syscall.c:52 el0_svc_common+0xbc/0x180 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x110 arch/arm64/kernel/syscall.c:193 el0_svc+0x58/0x14c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: 91388800 aa0903e1 f90003e8 94e6d752 (d4210000) Fixes: 6fd1d51c ("net: SO_RCVMARK socket option for SO_MARK with recvmsg()") Reported-by:
Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20230213160059.3829741-1-edumazet@google.comSigned-off-by:
-
- 14 Feb, 2023 3 commits
-
-
Cristian Ciocaltea authored
When setting 'snps,force_thresh_dma_mode' DT property, the following warning is always emitted, regardless the status of force_sf_dma_mode: dwmac-starfive 10020000.ethernet: force_sf_dma_mode is ignored if force_thresh_dma_mode is set. Do not print the rather misleading message when DMA store and forward mode is already disabled. Fixes: e2a240c7 ("driver:net:stmmac: Disable DMA store and forward mode if platform data force_thresh_dma_mode is set.") Signed-off-by:
Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20230210202126.877548-1-cristian.ciocaltea@collabora.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
The tc action act_ctinfo was using shared stats, fix it to use percpu stats since bstats_update() must be called with locks or with a percpu pointer argument. tdc results: 1..12 ok 1 c826 - Add ctinfo action with default setting ok 2 0286 - Add ctinfo action with dscp ok 3 4938 - Add ctinfo action with valid cpmark and zone ok 4 7593 - Add ctinfo action with drop control ok 5 2961 - Replace ctinfo action zone and action control ok 6 e567 - Delete ctinfo action with valid index ok 7 6a91 - Delete ctinfo action with invalid index ok 8 5232 - List ctinfo actions ok 9 7702 - Flush ctinfo actions ok 10 3201 - Add ctinfo action with duplicate index ok 11 8295 - Add ctinfo action with invalid index ok 12 3964 - Replace ctinfo action with invalid goto_chain control Fixes: 24ec483c ("net: sched: Introduce act_ctinfo action") Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20230210200824.444856-1-pctammela@mojatatu.comSigned-off-by:
-
Johannes Zink authored
So far changing the period by just setting new period values while running did not work. The order as indicated by the publicly available reference manual of the i.MX8MP [1] indicates a sequence: * initiate the programming sequence * set the values for PPS period and start time * start the pulse train generation. This is currently not used in dwmac5_flex_pps_config(), which instead does: * initiate the programming sequence and immediately start the pulse train generation * set the values for PPS period and start time This caused the period values written not to take effect until the FlexPPS output was disabled and re-enabled again. This patch fix the order and allows the period to be set immediately. [1] https://www.nxp.com/webapp/Download?colCode=IMX8MPRM Fixes: 9a8a02c9 ("net: stmmac: Add Flexible PPS support") Signed-off-by:
Johannes Zink <j.zink@pengutronix.de> Link: https://lore.kernel.org/r/20230210143937.3427483-1-j.zink@pengutronix.deSigned-off-by:
-
- 13 Feb, 2023 7 commits
-
-
Jesse Brandeburg authored
There was a problem reported to us where the addition of a VF with an IPv6 address ending with a particular sequence would cause the parent device on the PF to no longer be able to respond to neighbor discovery packets. In this case, we had an ovs-bridge device living on top of a VLAN, which was on top of a PF, and it would not be able to talk anymore (the neighbor entry would expire and couldn't be restored). The root cause of the issue is that if the PF is asked to be in IFF_PROMISC mode (promiscuous mode) and it had an ipv6 address that needed the 33:33:ff:00:00:04 multicast address to work, then when the VF was added with the need for the same multicast address, the VF would steal all the traffic destined for that address. The ice driver didn't auto-subscribe a request of IFF_PROMISC to the "multicast replication from other port's traffic" meaning that it won't get for instance, packets with an exact destination in the VF, as above. The VF's IPv6 address, which adds a "perfect filter" for 33:33:ff:00:00:04, results in no packets for that multicast address making it to the PF (which is in promisc but NOT "multicast replication"). The fix is to enable "multicast promiscuous" whenever the driver is asked to enable IFF_PROMISC, and make sure to disable it when appropriate. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by:
-
Michal Wilczynski authored
Currently checks for weight and priority ranges don't check incoming value from the devlink. Instead it checks node current weight or priority. This makes those checks useless. Change range checks in ice_set_object_tx_priority() and ice_set_object_tx_weight() to check against incoming priority an weight. Fixes: 42c2eb6b ("ice: Implement devlink-rate API") Signed-off-by:
Michal Wilczynski <michal.wilczynski@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
Michael Chan authored
In bnxt_reserve_rings(), there is logic to check that the number of TX rings reserved is enough to cover all the mqprio TCs, but it fails to account for the TX XDP rings. So the check will always fail if there are mqprio TCs and TX XDP rings. As a result, the driver always fails to initialize after the XDP program is attached and the device will be brought down. A subsequent ifconfig up will also fail because the number of TX rings is set to an inconsistent number. Fix the check to properly account for TX XDP rings. If the check fails, set the number of TX rings back to a consistent number after calling netdev_reset_tc(). Fixes: 674f50a5 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by:
Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Felix Riemann authored
When converting net_device_stats to rtnl_link_stats64 sign extension is triggered on ILP32 machines as 6c1c5097 changed the previous "ulong -> u64" conversion to "long -> u64" by accessing the net_device_stats fields through a (signed) atomic_long_t. This causes for example the received bytes counter to jump to 16EiB after having received 2^31 bytes. Casting the atomic value to "unsigned long" beforehand converting it into u64 avoids this. Fixes: 6c1c5097 ("net: add atomic_long_t to net_device_stats fields") Signed-off-by:
Felix Riemann <felix.riemann@sma.de> Reviewed-by:
-
Miko Larsson authored
syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/ Fixes: d4026123 ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730") Reported-and-tested-by: syzbot+cd80c5ef5121bfe85b55@syzkaller.appspotmail.com Signed-off-by:
Miko Larsson <mikoxyzzz@gmail.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Signed-off-by:
-
Hangyu Hua authored
old_meter needs to be free after it is detached regardless of whether the new meter is successfully attached. Fixes: c7c4c44c ("net: openvswitch: expand the meters supported number") Signed-off-by:
Hangyu Hua <hbh25y@gmail.com> Acked-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Hyunwoo Kim authored
Since x->encap of pfkey_msg2xfrm_state() is not initialized to 0, kernel heap data can be leaked. Fix with kzalloc() to prevent this. Signed-off-by:
Hyunwoo Kim <v4bel@theori.io> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Reviewed-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
- 11 Feb, 2023 8 commits
-
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== sk->sk_forward_alloc fixes. The first patch fixes a negative sk_forward_alloc by adding sk_rmem_schedule() before skb_set_owner_r(), and second patch removes an unnecessary WARN_ON_ONCE(). v2: https://lore.kernel.org/netdev/20230209013329.87879-1-kuniyu@amazon.com/ v1: https://lore.kernel.org/netdev/20230207183718.54520-1-kuniyu@amazon.com/ ==================== Link: https://lore.kernel.org/r/20230210002202.81442-1-kuniyu@amazon.comSigned-off-by:
-
Kuniyuki Iwashima authored
Christoph Paasch reported that commit b5fc2923 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues(). [0 - 2] Also, we can reproduce it by a program in [3]. In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy() to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in inet_csk_destroy_sock(). The same check has been in inet_sock_destruct() from at least v2.6, we can just remove the WARN_ON_ONCE(). However, among the users of sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct(). Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor(). [0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/ [1]: https://github.com/multipath-tcp/mptcp_net-next/issues/341 [2]: WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0 Modules linked in: CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9 RSP: 0018:ffff88810570fc68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005 RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488 R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458 FS: 00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0 Call Trace: <TASK> inet_csk_destroy_sock+0x1a1/0x320 __tcp_close+0xab6/0xe90 tcp_close+0x30/0xc0 inet_release+0xe9/0x1f0 inet6_release+0x4c/0x70 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7fdf7ae28d Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000 R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8 </TASK> [3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/ Fixes: b5fc2923 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") Reported-by:
Christoph Paasch <christophpaasch@icloud.com> Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
Kuniyuki Iwashima authored
Eric Dumazet pointed out [0] that when we call skb_set_owner_r() for ipv6_pinfo.pktoptions, sk_rmem_schedule() has not been called, resulting in a negative sk_forward_alloc. We add a new helper which clones a skb and sets its owner only when sk_rmem_schedule() succeeds. Note that we move skb_set_owner_r() forward in (dccp|tcp)_v6_do_rcv() because tcp_send_synack() can make sk_forward_alloc negative before ipv6_opt_accepted() in the crossed SYN-ACK or self-connect() cases. [0]: https://lore.kernel.org/netdev/CANn89iK9oc20Jdi_41jb9URdF210r7d1Y-+uypbMSbOfY6jqrg@mail.gmail.com/ Fixes: 323fbd0e ("net: dccp: Add handling of IPV6_PKTOPTIONS to dccp_v6_do_rcv()") Fixes: 3df80d93 ("[DCCP]: Introduce DCCPv6") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Natalia Petrova authored
The result of nlmsg_find_attr() 'br_spec' is dereferenced in nla_for_each_nested(), but it can take NULL value in nla_find() function, which will result in an error. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 51616018 ("i40e: Add support for getlink, setlink ndo ops") Signed-off-by:
Natalia Petrova <n.petrova@fintech.ru> Reviewed-by:
-
Larysa Zaremba authored
Incrementation of xsk_frames inside the for-loop produces infinite loop, if we have both normal AF_XDP-TX and XDP_TXed buffers to complete. Split xsk_frames into 2 variables (xsk_frames and completed_frames) to eliminate this bug. Fixes: 29322791 ("ice: xsk: change batched Tx descriptor cleaning") Acked-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
Pedro Tammela authored
The imperfect hash area can be updated while packets are traversing, which will cause a use-after-free when 'tcf_exts_exec()' is called with the destroyed tcf_ext. CPU 0: CPU 1: tcindex_set_parms tcindex_classify tcindex_lookup tcindex_lookup tcf_exts_change tcf_exts_exec [UAF] Stop operating on the shared area directly, by using a local copy, and update the filter with 'rcu_replace_pointer()'. Delete the old filter version only after a rcu grace period elapsed. Fixes: 9b0d4446 ("net: sched: avoid atomic swap in tcf_exts_change") Reported-by:valis <sec@valis.email> Suggested-by:
-
Pietro Borrello authored
Use list_is_first() to check whether tsp->asoc matches the first element of ep->asocs, as the list is not guaranteed to have an entry. Fixes: 8f840e47 ("sctp: add the sctp_diag.c file") Signed-off-by:
Pietro Borrello <borrello@diag.uniroma1.it> Acked-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20230208-sctp-filter-v2-1-6e1f4017f326@diag.uniroma1.itSigned-off-by:
-
Siddharth Vadapalli authored
In TI's AM62x/AM64x SoCs, successful teardown of RX DMA Channel raises an interrupt. The process of servicing this interrupt involves flushing all pending RX DMA descriptors and clearing the teardown completion marker (TDCM). The am65_cpsw_nuss_rx_packets() function invoked from the RX NAPI callback services the interrupt. Thus, it is necessary to wait for this handler to run, drain all packets and clear TDCM, before calling napi_disable() in am65_cpsw_nuss_common_stop() function post channel teardown. If napi_disable() executes before ensuring that TDCM is cleared, the TDCM remains set when the interfaces are down, resulting in an interrupt storm when the interfaces are brought up again. Since the interrupt raised to indicate the RX DMA Channel teardown is specific to the AM62x and AM64x SoCs, add a quirk for it. Fixes: 4f7cce27 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g") Co-developed-by:
Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by:
Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230209084432.189222-1-s-vadapalli@ti.comSigned-off-by:
-
- 10 Feb, 2023 10 commits
-
-
Ronak Doshi authored
Commit b3973bb4 ("vmxnet3: set correct hash type based on rss information") added hashType information into skb. However, rssType field is populated for eop descriptor. This can lead to incorrectly reporting of hashType for packets which use multiple rx descriptors. Multiple rx descriptors are used for Jumbo frame or LRO packets, which can hit this issue. This patch moves the RSS codeblock under eop descritor. Cc: stable@vger.kernel.org Fixes: b3973bb4 ("vmxnet3: set correct hash type based on rss information") Signed-off-by:
Ronak Doshi <doshir@vmware.com> Acked-by:
Peng Li <lpeng@vmware.com> Acked-by:
Guolin Yang <gyang@vmware.com> Link: https://lore.kernel.org/r/20230208223900.5794-1-doshir@vmware.comSigned-off-by:
-
Eric Dumazet authored
syzbot was able to trigger a warning [1] from net_free() calling ref_tracker_dir_exit(&net->notrefcnt_tracker) while the corresponding ref_tracker_dir_init() has not been done yet. copy_net_ns() can indeed bypass the call to setup_net() in some error conditions. Note: We might factorize/move more code in preinit_net() in the future. [1] INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 5817 Comm: syz-executor.3 Not tainted 6.2.0-rc7-next-20230208-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106 assign_lock_key kernel/locking/lockdep.c:982 [inline] register_lock_class+0xdb6/0x1120 kernel/locking/lockdep.c:1295 __lock_acquire+0x10a/0x5df0 kernel/locking/lockdep.c:4951 lock_acquire.part.0+0x11c/0x370 kernel/locking/lockdep.c:5691 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x3d/0x60 kernel/locking/spinlock.c:162 ref_tracker_dir_exit+0x52/0x600 lib/ref_tracker.c:24 net_free net/core/net_namespace.c:442 [inline] net_free+0x98/0xd0 net/core/net_namespace.c:436 copy_net_ns+0x4f3/0x6b0 net/core/net_namespace.c:493 create_new_namespaces+0x3f6/0xb20 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc1/0x1f0 kernel/nsproxy.c:228 ksys_unshare+0x449/0x920 kernel/fork.c:3205 __do_sys_unshare kernel/fork.c:3276 [inline] __se_sys_unshare kernel/fork.c:3274 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3274 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 Fixes: 0cafd77d ("net: add a refcount tracker for kernel sockets") Reported-by:
-
Jakub Kicinski authored
Guillaume Nault says: ==================== ipv6: Fix socket connection with DSCP fib-rules. The "flowlabel" field of struct flowi6 is used to store both the actual flow label and the DS Field (or Traffic Class). However the .connect handlers of datagram and TCP sockets don't set the DS Field part when doing their route lookup. This breaks fib-rules that match on DSCP. ==================== Link: https://lore.kernel.org/r/cover.1675875519.git.gnault@redhat.comSigned-off-by:
-
Guillaume Nault authored
Add the fib_rule6_send and fib_rule4_send tests to verify that DSCP values are properly taken into account when UDP or TCP sockets try to connect(). Tests are done with nettest, which needs a new option to specify the DS Field value of the socket being tested. This new option is named '-Q', in reference to the similar option used by ping. Signed-off-by:
Guillaume Nault <gnault@redhat.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Guillaume Nault authored
Take into account the IPV6_TCLASS socket option (DSCP) in tcp_v6_connect(). Otherwise fib6_rule_match() can't properly match the DSCP value, resulting in invalid route lookup. For example: ip route add unreachable table main 2001:db8::10/124 ip route add table 100 2001:db8::10/124 dev eth0 ip -6 rule add dsfield 0x04 table 100 echo test | socat - TCP6:[2001:db8::11]:54321,ipv6-tclass=0x04 Without this patch, socat fails at connect() time ("No route to host") because the fib-rule doesn't jump to table 100 and the lookup ends up being done in the main table. Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.") Signed-off-by: -
Guillaume Nault authored
Take into account the IPV6_TCLASS socket option (DSCP) in ip6_datagram_flow_key_init(). Otherwise fib6_rule_match() can't properly match the DSCP value, resulting in invalid route lookup. For example: ip route add unreachable table main 2001:db8::10/124 ip route add table 100 2001:db8::10/124 dev eth0 ip -6 rule add dsfield 0x04 table 100 echo test | socat - UDP6:[2001:db8::11]:54321,ipv6-tclass=0x04 Without this patch, socat fails at connect() time ("No route to host") because the fib-rule doesn't jump to table 100 and the lookup ends up being done in the main table. Fixes: 2cc67cc7 ("[IPV6] ROUTE: Routing by Traffic Class.") Signed-off-by: -
Jakub Kicinski authored
Simon Horman says: ==================== nfp: fix schedule in atomic context when offloading sa Yinjun Zhang says: IPsec offloading callbacks may be called in atomic context, sleep is not allowed in the implementation. Now use workqueue mechanism to avoid this issue. Extend existing workqueue mechanism for multicast configuration only to universal use, so that all configuring through mailbox asynchoronously can utilize it. Also fix another two incorrect use of mailbox in IPsec: 1. Need lock for race condition when accessing mbox 2. Offset of mbox access should depends on tlv caps ==================== Link: https://lore.kernel.org/r/20230208102258.29639-1-simon.horman@corigine.comSigned-off-by:
-
Yinjun Zhang authored
IPsec offloading callbacks may be called in atomic context, sleep is not allowed in the implementation. Now use workqueue mechanism to avoid this issue. Extend existing workqueue mechanism for multicast configuration only to universal use, so that all configuring through mailbox asynchronously can utilize it. Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer") Signed-off-by:
Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by:
-
Yinjun Zhang authored
The mailbox configuration mechanism requires writing several registers, which shouldn't be interrupted, so need lock to avoid race condition. The base offset of mailbox configuration registers is not fixed, it depends on TLV caps read from application firmware. Fixes: 859a497f ("nfp: implement xfrm callbacks and expose ipsec offload feature to upper layer") Signed-off-by:
-
Rafał Miłecki authored
Code blocks handling BCMA_CHIP_ID_BCM5357 and BCMA_CHIP_ID_BCM53572 were incorrectly unified. Chip package values are not unique and cannot be checked independently. They are meaningful only in a context of a given chip. Packages BCM5358 and BCM47188 share the same value but then belong to different chips. Code unification resulted in treating BCM5358 as BCM47188 and broke its initialization. Link: https://github.com/openwrt/openwrt/issues/8278 Fixes: cb1b0f90 ("net: ethernet: bgmac: unify code of the same family") Cc: Jon Mason <jdmason@kudzu.us> Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230208091637.16291-1-zajec5@gmail.comSigned-off-by:
-
- 09 Feb, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from can and ipsec subtrees. Current release - regressions: - sched: fix off by one in htb_activate_prios() - eth: mana: fix accessing freed irq affinity_hint - eth: ice: fix out-of-bounds KASAN warning in virtchnl Current release - new code bugs: - eth: mtk_eth_soc: enable special tag when any MAC uses DSA Previous releases - always broken: - core: fix sk->sk_txrehash default - neigh: make sure used and confirmed times are valid - mptcp: be careful on subflow status propagation on errors - xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr() - phylink: move phy_device_free() to correctly release phy device - eth: mlx5: - fix crash unsetting rx-vlan-filter in switchdev mode - fix hang on firmware reset - serialize module cleanup with reload and remove" * tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits) selftests: forwarding: lib: quote the sysctl values net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used rds: rds_rm_zerocopy_callback() use list_first_entry() net: txgbe: Update support email address selftests: Fix failing VXLAN VNI filtering test selftests: mptcp: stop tests earlier selftests: mptcp: allow more slack for slow test-case mptcp: be careful on subflow status propagation on errors mptcp: fix locking for in-kernel listener creation mptcp: fix locking for setsockopt corner-case mptcp: do not wait for bare sockets' timeout net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0 nfp: ethtool: fix the bug of setting unsupported port speed txhash: fix sk->sk_txrehash default net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg() net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA net: sched: sch: Fix off by one in htb_activate_prios() igc: Add ndo_tx_timeout support net: mana: Fix accessing freed irq affinity_hint hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential infinite loop with a badly crafted HID device (Xin Zhao) - fix regression from 6.1 in USB logitech devices potentially making their mouse wheel not working (Bastien Nocera) - clean up in AMD sensors, which fixes a long time resume bug (Mario Limonciello) - few device small fixes and quirks * tag 'for-linus-2023020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: Ignore battery for ELAN touchscreen 29DF on HP HID: amd_sfh: if no sensors are enabled, clean up HID: logitech: Disable hi-res scrolling on USB HID: core: Fix deadloop in hid_apply_multiplier. HID: Ignore battery for Elan touchscreen on Asus TP420IA HID: elecom: add support for TrackBall 056E:011C
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifx fix from Steve French: "Small fix for use after free" * tag '6.2-rc8-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix use-after-free in rdata->read_into_pages()
-
Hangbin Liu authored
When set/restore sysctl value, we should quote the value as some keys may have multi values, e.g. net.ipv4.ping_group_range Fixes: f5ae5778 ("selftests: forwarding: lib: Add sysctl_set(), sysctl_restore()") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20230208032110.879205-1-liuhangbin@gmail.comSigned-off-by:
-
Vladimir Oltean authored
While running this selftest which usually passes: ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] if I start PTP timestamping then run it again (debug prints added by me), the unknown IPv6 MC traffic is seen by the CPU port even when it should have been dropped: ~/selftests/drivers/net/dsa# ptp4l -i swp0 -2 -P -m ptp4l[225.410]: selected /dev/ptp1 as PTP clock [ 225.445746] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_add: port 0 adding L2 PTP trap [ 225.453815] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP event trap [ 225.462703] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_add: port 0 adding IPv4 PTP general trap [ 225.471768] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP event trap [ 225.480651] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_add: port 0 adding IPv6 PTP general trap ptp4l[225.488]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[225.488]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE ^C ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [FAIL] reception succeeded, but should have failed TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] The PGID_MCIPV6 is configured correctly to not flood to the CPU, I checked that. Furthermore, when I disable back PTP RX timestamping (ptp4l doesn't do that when it exists), packets are RX filtered again as they should be: ~/selftests/drivers/net/dsa# hwstamp_ctl -i swp0 -r 0 [ 218.202854] mscc_felix 0000:00:00.5: ocelot_l2_ptp_trap_del: port 0 removing L2 PTP trap [ 218.212656] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP event trap [ 218.222975] mscc_felix 0000:00:00.5: ocelot_ipv4_ptp_trap_del: port 0 removing IPv4 PTP general trap [ 218.233133] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP event trap [ 218.242251] mscc_felix 0000:00:00.5: ocelot_ipv6_ptp_trap_del: port 0 removing IPv6 PTP general trap current settings: tx_type 1 rx_filter 12 new settings: tx_type 1 rx_filter 0 ~/selftests/drivers/net/dsa# ./local_termination.sh eno0 swp0 TEST: swp0: Unicast IPv4 to primary MAC address [ OK ] TEST: swp0: Unicast IPv4 to macvlan MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, promisc [ OK ] TEST: swp0: Unicast IPv4 to unknown MAC address, allmulti [ OK ] TEST: swp0: Multicast IPv4 to joined group [ OK ] TEST: swp0: Multicast IPv4 to unknown group [ OK ] TEST: swp0: Multicast IPv4 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv4 to unknown group, allmulti [ OK ] TEST: swp0: Multicast IPv6 to joined group [ OK ] TEST: swp0: Multicast IPv6 to unknown group [ OK ] TEST: swp0: Multicast IPv6 to unknown group, promisc [ OK ] TEST: swp0: Multicast IPv6 to unknown group, allmulti [ OK ] So it's clear that something in the PTP RX trapping logic went wrong. Looking a bit at the code, I can see that there are 4 typos, which populate "ipv4" VCAP IS2 key filter fields for IPv6 keys. VCAP IS2 keys of type OCELOT_VCAP_KEY_IPV4 and OCELOT_VCAP_KEY_IPV6 are handled by is2_entry_set(). OCELOT_VCAP_KEY_IPV4 looks at &filter->key.ipv4, and OCELOT_VCAP_KEY_IPV6 at &filter->key.ipv6. Simply put, when we populate the wrong key field, &filter->key.ipv6 fields "proto.mask" and "proto.value" remain all zeroes (or "don't care"). So is2_entry_set() will enter the "else" of this "if" condition: if (msk == 0xff && (val == IPPROTO_TCP || val == IPPROTO_UDP)) and proceed to ignore the "proto" field. The resulting rule will match on all IPv6 traffic, trapping it to the CPU. This is the reason why the local_termination.sh selftest sees it, because control traps are stronger than the PGID_MCIPV6 used for flooding (from the forwarding data path). But the problem is in fact much deeper. We trap all IPv6 traffic to the CPU, but if we're bridged, we set skb->offload_fwd_mark = 1, so software forwarding will not take place and IPv6 traffic will never reach its destination. The fix is simple - correct the typos. I was intentionally inaccurate in the commit message about the breakage occurring when any PTP timestamping is enabled. In fact it only happens when L4 timestamping is requested (HWTSTAMP_FILTER_PTP_V2_EVENT or HWTSTAMP_FILTER_PTP_V2_L4_EVENT). But ptp4l requests a larger RX timestamping filter than it needs for "-2": HWTSTAMP_FILTER_PTP_V2_EVENT. I wanted people skimming through git logs to not think that the bug doesn't affect them because they only use ptp4l in L2 mode. Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Pietro Borrello authored
rds_rm_zerocopy_callback() uses list_entry() on the head of a list causing a type confusion. Use list_first_entry() to actually access the first element of the rs_zcookie_queue list. Fixes: 9426bbc6 ("rds: use list structure to track information for zerocopy completion notification") Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
