- 13 Oct, 2021 7 commits
-
-
Lang Yu authored
Display support for cyan skillfish is ready now. Enable it! Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Simon Ser authored
The current logic checks whether the cursor plane blending properties match the primary plane's. However that's wrong, because the cursor is painted on all planes underneath. If the cursor is over the primary plane and the overlay plane, it's painted on both pipes. Iterate over the CRTC planes and check their scaling match the cursor's. v4: fix typo in commit message (Harry) Signed-off-by:
Simon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Alex Sierra authored
svm_range_list svms declaration removed to avoid werror when CONFIG_HSA_AMD_SVM is not enabled. Signed-off-by:
Alex Sierra <alex.sierra@amd.com> Reviewed-by:
-
Yifan Zhang authored
[ RUN ] KFDSVMRangeTest.PartialUnmapSysMemTest /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:245: Failure Value of: (hsaKmtAllocMemory(m_Node, m_Size, m_Flags, &m_pBuf)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:248: Failure Value of: (hsaKmtMapMemoryToGPUNodes(m_pBuf, m_Size, __null, mapFlags, 1, &m_Node)) Actual: 1 Expected: HSAKMT_STATUS_SUCCESS Which is: 0 /home/yifan/brahma/libhsakmt/tests/kfdtest/src/KFDTestUtil.cpp:306: Failure Expected: ((void *)__null) != (ptr), actual: NULL vs NULL Segmentation fault (core dumped) [ ] Profile: Full Test [ ] HW capabilities: 0x9 kernel log: [ 102.029150] ret_from_fork+0x22/0x30 [ 102.029158] ---[ end trace 15c34e782714f9a3 ]--- [ 3613.603598] amdgpu: Address: 0x7f7149ccc000 already allocated by SVM [ 3613.610620] show_signal_msg: 27 callbacks suppressed These is race with deferred actions from previous memory map changes (e.g. munmap).Flush pending deffered work to avoid such case. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yifan Zhang authored
export svm_range_list_lock_and_flush_work to make other kfd parts be able to sync svm_range_list. Signed-off-by:
-
Alex Sierra authored
[Why] Avoid conflict with address ranges mapped by SVM mechanism that try to be allocated again through ioctl_alloc in the same process. And viceversa. [How] For ioctl_alloc_memory_of_gpu allocations Check if the address range passed into ioctl memory alloc does not exist already in the kfd_process svms->objects interval tree. For SVM allocations Look for the address range into the interval tree VA from the VM inside of each pdds used in a kfd_process. Signed-off-by:
-
Alex Deucher authored
It's used internally by firmware. Using it in the driver could conflict with firmware. v2: squash in fix for navi1x (Alex) Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
- 11 Oct, 2021 6 commits
-
-
Alex Deucher authored
It's used internally by firmware. Using it in the driver could conflict with firmware. Reviewed-by:
-
Lang Yu authored
Query default sclk instead of hard code. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2021-10-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - Add uAPI for using PXP protected objects Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8064 - Add PCI IDs and LMEM discovery/placement uAPI for DG1 Mesa changes: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11584 - Disable engine bonding on Gen12+ except TGL, RKL and ADL-S Cross-subsystem Changes: - Merges 'tip/locking/wwmutex' branch (core kernel tip) - "mei: pxp: export pavp client to me client bus" Core Changes: - Update ttm_move_memcpy for async use (Thomas) Driver Changes: - Enable GuC submission by default on DG1 (Matt B) - Add PXP (Protected Xe Path) support for Gen12 integrated (Daniele, Sean, Anshuman) See "drm/i915/pxp: add PXP documentation" for details! - Remove force_probe protection for ADL-S (Raviteja) - Add base support for XeHP/XeHP SDV (Matt R, Stuart, Lucas) - Handle DRI_PRIME=1 on Intel igfx + Intel dgfx hybrid graphics setup (Tvrtko) - Use Transparent Hugepages when IOMMU is enabled (Tvrtko, Chris) - Implement LMEM backup and restore for suspend / resume (Thomas) - Report INSTDONE_GEOM values in error state for DG2 (Matt R) - Add DG2-specific shadow register table (Matt R) - Update Gen11/Gen12/XeHP shadow register tables (Matt R) - Maintain backward-compatible nested batch behavior on TGL+ (Matt R) - Add new LRI reg offsets for DG2 (Akeem) - Initialize unused MOCS entries to device specific values (Ayaz) - Track and use the correct UC MOCS index on Gen12 (Ayaz) - Add separate MOCS table for Gen12 devices other than TGL/RKL (Ayaz) - Simplify the locking and eliminate some RCU usage (Daniel) - Add some flushing for the 64K GTT path (Matt A) - Mark GPU wedging on driver unregister unrecoverable (Janusz) - Major rework in the GuC codebase, simplify locking and add docs (Matt B) - Add DG1 GuC/HuC firmwares (Daniele, Matt B) - Remember to call i915_sw_fence_fini on guc_state.blocked (Matt A) - Use "gt" forcewake domain name for error messages instead of "blitter" (Matt R) - Drop now duplicate LMEM uAPI RFC kerneldoc section (Daniel) - Fix early tracepoints for requests (Matt A) - Use locked access to ctx->engines in set_priority (Daniel) - Convert gen6/gen7/gen8 read operations to fwtable (Matt R) - Drop gen11/gen12 specific mmio write handlers (Matt R) - Drop gen11 specific mmio read handlers (Matt R) - Use designated initializers for init/exit table (Kees) - Fix syncmap memory leak (Matt B) - Add pretty printing for buddy allocator state debug (Matt A) - Fix potential error pointer dereference in pinned_context() (Dan) - Remove IS_ACTIVE macro (Lucas) - Static code checker fixes (Nathan) - Clean up disabled warnings (Nathan) - Increase timeout in i915_gem_contexts selftests 5x for GuC submission (Matt B) - Ensure wa_init_finish() is called for ctx workaround list (Matt R) - Initialize L3CC table in mocs init (Sreedhar, Ayaz, Ram) - Get PM ref before accessing HW register (Vinay) - Move __i915_gem_free_object to ttm_bo_destroy (Maarten) - Deduplicate frequency dump on debugfs (Lucas) - Make wa list per-gt (Venkata) - Do not define dummy vma in stack (Venkata) - Take pinning into account in __i915_gem_object_is_lmem (Matt B, Thomas) - Do not report currently active engine when describing objects (Tvrtko) - Fix pdfdocs build error by removing nested grid from GuC docs (Akira) - Remove false warning from the rps worker (Tejas) - Flush buffer pools on driver remove (Janusz) - Fix runtime pm handling in i915_gem_shrink (Maarten) - Rework TTM object initialization slightly (Thomas) - Use fixed offset for PTEs location (Michal Wa) - Verify result from CTB (de)register action and improve error messages (Michal Wa) - Fix bug in user proto-context creation that leaked contexts (Matt B) - Re-use Gen11 forcewake read functions on Gen12 (Matt R) - Make shadow tables range-based (Matt R) - Ditch the i915_gem_ww_ctx loop member (Thomas, Maarten) - Use NULL instead of 0 where appropriate (Ville) - Rename pci/debugfs functions to respect file prefix (Jani, Lucas) - Drop guc_communication_enabled (Daniele) - Selftest fixes (Thomas, Daniel, Matt A, Maarten) - Clean up inconsistent indenting (Colin) - Use direction definition DMA_BIDIRECTIONAL instead of PCI_DMA_BIDIRECTIONAL (Cai) - Add "intel_" as prefix in set_mocs_index() (Ayaz) From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/YWAO80MB2eyToYoy@jlahtine-mobl.ger.corp.intel.comSigned-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Cross-subsystem Changes: - fbdev/efifb: Release PCI device's runtime PM ref during FB destr\ oy (Imre) i915 Core Driver Changes: - Only access SFC_DONE in media when not fused off for graphics 12 and newer. - Double Memory latency values from pcode for DG2 (Matt Roper) - ADL-S PCI ID update (Tejas) - New DG1 PCI ID (Jose) - Fix regression with uncore refactoring (Dave) i915 Display Changes: - ADL-P display (XE_LPD) fixes and updates (Ankit, Jani, Matt Roper, Anusham, Jose, Imre, Vandita) - DG2 display fixes (Ankit, Jani) - Expand PCH_CNP tweaked display workaround to all newer displays (Anshuman) - General display simplifications and clean-ups (Jani, Swati, Jose, Ville) - PSR Clean-ups, dropping support for BDW/HSD and enable PSR2 selective fetch by default (Jose, Gwan-gyeong) - Nuke ORIGIN_GTT (Jose) - Return proper DPRX link training result (Lee) - FBC related refactor and fixes (Ville) - Yet another attempt to solve the fast+narrow vs slow+wide eDP link training (Kai-Heng) - DP 2.0 preparation work (Jani) - Silence __iomem sparse warn (Ville) - Clean up DPLL stuff (Ville) - Fix various dp/edp max rates (Matt Atwood, Animesh, Jani) - Remove VBT ddi_port_info caching (Jani) - DSI driver improvements (Lee) - HDCP fixes (Juston) - Associate ACPI connector nodes with connector entries (Heikki) - Add support for out-of-bound hotplug events (Hans) - VESA vendor block and drm/i915 MSO use of it (Jani) - Fixes for bigjoiner (Ville) - Update memory bandwidth parameters (RK) - DMC related fixes (Chris, Jose) - HDR related fixes and improvements (Tejas) - g4x/vlv/chv CxSR/wm fixes/cleanups (Ville) - Use BIOS provided value for RKL Audio's HDA link (Kai-Heng) - Fix the dsc check while selecting min_cdclk (Vandita) - Split and constify vtable (Dave) - Add ww context to intel_dpt_pin (Maarten) - Fix bdb version check (Lukasz) - DP per-lane drive settings prep work and other DP fixes (Ville) Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.16: UAPI Changes: - Allow empty drm leases for creating separate GEM namespaces. Cross-subsystem Changes: - Slightly rework dma_buf_poll. - Add dma_resv_for_each_fence_unlocked to iterate, and use it inside the lockless dma-resv functions. Core Changes: - Allow devm_drm_of_get_bridge to build without CONFIG_OF for compile testing. - Add more DP2 headers. - fix CONFIG_FB dependency in fb_helper. - Add DRM_FORMAT_R8 to drm_format_info, and helpers for RGB332 and RGB888. - Fix crash on a 0 or invalid EDID. Driver Changes: - Apply and revert DRM_MODESET_LOCK_ALL_BEGIN. - Add mode_valid to ti-sn65dsi86 bridge. - Support multiple syncobjs in v3d. - Add R8, RGB332 and RGB888 pixel formats to GUD. - Use devm_add_action_or_reset in dw-hdmi-cec. Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.16-2021-10-08' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.16-2021-10-08: amdgpu: - gart BO pin count fix - RAS fixes - Misc display fixes - Misc code cleanups - Validate IP discovery table - IOMMU handling fixes for hotplug - Cyan Skillfish display support - DP 2.0 fixes - Covert vega and navi to IP discovery based asic enumeration - JPEG fixes - More FP cleanup for display - DCC fixes for DCN3.x - Initial USB4 DP tunnelling support - Aldebaran MCE support amdkfd: - Misc bug fixes - Misc code cleanups - RAS fixes x86/MCE: - Export symbol for use by GPU driver Signed-off-by:
-
- 08 Oct, 2021 9 commits
-
-
kernel test robot authored
Generated by: scripts/checkincludes.pl Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Lv Ruyi authored
Remove all but the first include of reg_helper.h and core_types.h from dcn201_clk_mgr.c. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Signed-off-by:
-
Guchun Chen authored
adev_to_drm is used everywhere, so improve recent changes when accessing drm_device pointer from amdgpu_device. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Sierra authored
This fix the deadlock with the BO reservations during SVM_BO evictions while allocations in VRAM are concurrently performed. More specific, while the ttm waits for the fence to be signaled (ttm_bo_wait), it already has the BO reserved. In parallel, the restore worker might be running, prefetching memory to VRAM. This also requires to reserve the BO, but blocks the mmap semaphore first. The deadlock happens when the SVM_BO eviction worker kicks in and waits for the mmap semaphore held in restore worker. Preventing signal the fence back, causing the deadlock until the ttm times out. We don't need to hold the BO reservation anymore during validation and mapping. Now the physical addresses are taken from hmm_range_fault. We also take migrate_mutex to prevent range migration while validate_and_map update GPU page table. Signed-off-by:
Philip Yang <philip.yang@amd.com> Signed-off-by:
-
Wayne Lin authored
[Why & How] Got Werror when building with Clang-13: drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:195:2: error: variable 'ts' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized] default: ^~~~~~~ drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:200:9: note: uninitialized use occurs here return ts; ^~ drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link_dpia.c:180:2: note: variable 'ts' is declared here enum dpia_set_config_ts ts; ^ 1 error generated. Fix it. Reported-by:Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
-
Alex Deucher authored
Missing 4.1.2. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Colin Ian King authored
The variable result is being initialized with a value that is never read, it is being updated immediately afterwards in both branches of an if statement. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Alex Deucher authored
Was missed when converting the driver over to IP based initialization. Tested-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU improvements & enhancements to misc drivers Most notably, - Non-contiguous buffer import support for rcar-du - r8a779a0 support preparation for rcar-du - COMPILE_TEST fixes for omapdrm and sti Signed-off-by:
-
- 07 Oct, 2021 18 commits
-
-
Lucas De Marchi authored
When trying to bring IS_ACTIVE to linux/kconfig.h I thought it wouldn't provide much value just encapsulating it in a boolean context. So I also added the support for handling undefined macros as the IS_ENABLED() counterpart. However the feedback received from Masahiro Yamada was that it is too ugly, not providing much value. And just wrapping in a boolean context is too dumb - we could simply open code it. As detailed in commit babaab2f ("drm/i915: Encapsulate kconfig constant values inside boolean predicates"), the IS_ACTIVE macro was added to workaround a compilation warning. However after checking again our current uses of IS_ACTIVE it turned out there is only 1 case in which it triggers a warning in clang (due -Wconstant-logical-operand) and 2 in smatch. All the others can simply use the shorter version, without wrapping it in any macro. So here I'm dialing all the way back to simply removing the macro. That single case hit by clang can be changed to make the constant come first, so it doesn't think it's mask: - if (context && CONFIG_DRM_I915_FENCE_TIMEOUT) + if (CONFIG_DRM_I915_FENCE_TIMEOUT && context) As talked with Dan Carpenter, that logic will be added in smatch as well, so it will also stop warning about it. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Masahiro Yamada <masahiroy@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211005171728.3147094-1-lucas.demarchi@intel.com
-
Nirmoy Das authored
Unify BO evicting functionality for possible memory types in amdgpu_ttm.c. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
-
Kieran Bingham authored
Extend the rcar_du_device_info structure and rcar_du_output enum to support DSI outputs and utilise these additions to provide support for the R8A779A0 V3U platform. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
Kieran Bingham authored
Not all platforms require both per-crtc IRQ and per-crtc clock management. In preparation for suppporting such platforms, split the feature macro to be able to specify both features independently. The other features are incremented accordingly, to keep the two crtc features adjacent. Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The DIDSR fields named LDCS were incorrectly defined as LCDS. Both the Gen2 and Gen3 documentation refer to the fields as the "LVDS Dot Clock Select". Correct the definitions. Reviewed-by:
-
Kieran Bingham authored
The R-Car DU as found on the D3, E3, and V3U do not have support for an external synchronisation method. In these cases, the dsysr cached register should not be initialised in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as DSYSR_TVM_MASTER by default. Reviewed-by:
-
Kieran Bingham authored
Sort the DU outputs alphabetically, with the exception of the final entry which is there as a sentinal. Reviewed-by:
-
Kieran Bingham authored
Extend the Renesas DU display bindings to support the r8a779a0 V3U. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Reviewed-by:
-
Cai Huoqing authored
Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by:
-
Laurent Pinchart authored
The correct format specifier for size_t is %zu. Using %d (or %u) generates a warning on 64-bit platforms. Fix it. Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com>
-
Laurent Pinchart authored
The driver accesses the drm_bridge.of_node field, which is present only if CONFIG_OF is enabled. As all platforms using omapdrm are OF-based, we can simply depend on CONFIG_OF. Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Laurent Pinchart authored
On 64-bit platforms, the compiler complains that casting a void pointer to an unsigned int loses data. Cast the pointer to a uintptr_t to fix this. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
-
Laurent Pinchart authored
The correct format specifier for size_t is %zu. Using %d (or %u) generates a warning on 64-bit platforms. Fix it. Signed-off-by:
-
Laurent Pinchart authored
strncpy() is widely regarded as unsafe due to the fact that it may leave the destination string without a nul-termination when the source string size is too large. When compiling the kernel with W=1, the gcc warns about this: drivers/gpu/drm/drm_property.c: In function ‘drm_property_create’: drivers/gpu/drm/drm_property.c:130:2: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation] 130 | strncpy(property->name, name, DRM_PROP_NAME_LEN); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ There are three occurrences of strncpy() in drm_property.c. None of them are actually unsafe, as the very next line forces nul-termination of the destination buffer. The warning is thus a false positive, but adds noise to the kernel log. It can easily be silenced by using strscpy_pad() instead. Do so. One of the three occurrences, in drm_property_add_enum(), fills a char array that is later copied to userspace with copy_to_user() in drm_mode_getproperty_ioctl(). To avoid leaking kernel data, strscpy_pad() is required. Similarly, a second occurrence, in drm_mode_getproperty_ioctl(), copies the string to an ioctl data buffer that isn't previously zero'ed, to strscpy_pad() is also required. The last occurrence, in drm_property_create(), would be safe to replace with strscpy(), as the destination buffer is copied to userspace with strscpy_pad(). However, given that this isn't in a hot path, let's avoid future data leaks in case someone copies the whole char array blindly. Signed-off-by: -
Laurent Pinchart authored
On R-Car Gen3, the DU uses a separate IP core named VSP to perform DMA from memory and composition of planes. The DU hardware then only handles the video timings and the interface with the encoders. This differs from Gen2, where the DU included a composer with DMA engines. When sourcing from the VSP, the DU hardware performs no memory access, and thus has no requirements on imported dma-buf memory types. The GEM CMA helpers however still create a DMA mapping to the DU device, which isn't used. The mapping to the VSP is done when processing the atomic commits, in the plane .prepare_fb() handler. When the system uses an IOMMU, the VSP device is attached to it, which enables the VSP to use non physically contiguous memory. The DU, as it performs no memory access, isn't connected to the IOMMU. The GEM CMA drm_gem_cma_prime_import_sg_table() helper will in that case fail to map non-contiguous imported dma-bufs, as the DMA mapping to the DU device will have multiple entries in its sgtable. The prevents using non physically contiguous memory for display. The DRM PRIME and GEM CMA helpers are designed to create the sgtable when the dma-buf is imported. By default, the device referenced by the drm_device is used to create the dma-buf attachment. Drivers can use a different device by using the drm_gem_prime_import_dev() function. While the DU has access to the VSP device, this won't help here, as different CRTCs use different VSP instances, connected to different IOMMU channels. The driver doesn't know at import time which CRTC a GEM object will be used, and thus can't select the right VSP device to pass to drm_gem_prime_import_dev(). To support non-contiguous memory, implement a custom .gem_prime_import_sg_table() operation that accepts all imported dma-buf regardless of the number of scatterlist entries. The sgtable will be mapped to the VSP at .prepare_fb() time, which will reject the framebuffer if the VSP isn't connected to an IOMMU. Signed-off-by:
-
Laurent Pinchart authored
The DU DMA address space is limited to 32 bits, so the DMA coherent mask should be set accordingly. The DMA mapping implementation will transparently map high memory buffers to 32-bit addresses through an IOMMU when present (or through bounce buffers otherwise, which isn't a supported use case as performances would be terrible). However, when sourcing frames from a VSP, the situation is more complicated. The DU delegates all memory accesses to the VSP and doesn't perform any DMA access by itself. Due to how the GEM CMA helpers are structured buffers are still mapped to the DU device. They are later mapped to the VSP as well to perform DMA access, through the IOMMU connected to the VSP. Setting the DMA coherent mask to 32 bits for the DU when using a VSP can cause issues when importing a dma_buf. If the buffer is located above the 32-bit address space, the DMA mapping implementation will try to map it to the DU's DMA address space. As the DU has no IOMMU a bounce buffer will be allocated, which in the best case will waste memory and in the worst case will just fail. To work around this issue, set the DMA coherent mask to the full 40-bit address space for the DU. All dma-buf instances will be imported without any restriction, and will be mapped to the VSP when preparing the associated framebuffer. Signed-off-by:
Liviu Dudau <liviu.dudau@arm.com>
-
Laurent Pinchart authored
Improve the debugging and error messages printing when initializing encoders by replacing the output number by the output name, printing the bridge OF node name, and the error code of failed operations. While at it, move the related rcar_du_output enumeration from rcar_du_crtc.h to rcar_du_drv.h as it's not specific to the CRTC. Signed-off-by:
-
