Hardware offload of port filtering are now supported via tc command using
flower filter. ACL rules are used to enable the hardware offload.
The following keys are supported:

vlan_id
vlan_prio
dst_mac/src_mac for non IP frames
dst_ip/src_ip
dst_port/src_port

The following actions are supported:
trap
drop

These filters are supported only on the ingress schedulare.

Add:
tc qdisc add dev eth3 ingress
tc filter ad dev eth3 parent ffff: ip_proto ip flower \
    ip_proto tcp dst_port 80 action drop
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ACL support using the TCAM. Using ACL it is possible to create rules
in hardware to filter/redirect frames.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add functional test cases for nexthop objects.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset container Netfilter/IPVS update for net-next:

1) Add UDP tunnel support for ICMP errors in IPVS.

Julian Anastasov says:

This patchset is a followup to the commit that adds UDP/GUE tunnel:
"ipvs: allow tunneling with gue encapsulation".

What we do is to put tunnel real servers in hash table (patch 1),
add function to lookup tunnels (patch 2) and use it to strip the
embedded tunnel headers from ICMP errors (patch 3).

2) Extend xt_owner to match for supplementary groups, from
   Lukasz Pawelczyk.

3) Remove unused oif field in flow_offload_tuple object, from
   Taehee Yoo.

4) Release basechain counters from workqueue to skip synchronize_rcu()
   call. From Florian Westphal.

5) Replace skb_make_writable() by skb_ensure_writable(). Patchset
   from Florian Westphal.

6) Checksum support for gue encapsulation in IPVS, from Jacky Hu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf-next 2019-05-31

The following pull-request contains BPF updates for your *net-next* tree.

Lots of exciting new features in the first PR of this developement cycle!
The main changes are:

1) misc verifier improvements, from Alexei.

2) bpftool can now convert btf to valid C, from Andrii.

3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
   This feature greatly improves BPF speed on 32-bit architectures. From Jiong.

4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
   bpf programs got stuck in dying cgroups. From Roman.

5) new bpf_send_signal() helper, from Yonghong.

6) cgroup inet skb programs can signal CN to the stack, from Lawrence.

7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

xdping allows us to get latency estimates from XDP.  Output looks
like this:

./xdping -I eth4 192.168.55.8
Setting up XDP for eth4, please wait...
XDP setup disrupts network connectivity, hit Ctrl+C to quit

Normal ping RTT data
[Ignore final RTT; it is distorted by XDP using the reply]
PING 192.168.55.8 (192.168.55.8) from 192.168.55.7 eth4: 56(84) bytes of data.
64 bytes from 192.168.55.8: icmp_seq=1 ttl=64 time=0.302 ms
64 bytes from 192.168.55.8: icmp_seq=2 ttl=64 time=0.208 ms
64 bytes from 192.168.55.8: icmp_seq=3 ttl=64 time=0.163 ms
64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.275 ms

4 packets transmitted, 4 received, 0% packet loss, time 3079ms
rtt min/avg/max/mdev = 0.163/0.237/0.302/0.054 ms

XDP RTT data:
64 bytes from 192.168.55.8: icmp_seq=5 ttl=64 time=0.02808 ms
64 bytes from 192.168.55.8: icmp_seq=6 ttl=64 time=0.02804 ms
64 bytes from 192.168.55.8: icmp_seq=7 ttl=64 time=0.02815 ms
64 bytes from 192.168.55.8: icmp_seq=8 ttl=64 time=0.02805 ms

The xdping program loads the associated xdping_kern.o BPF program
and attaches it to the specified interface.  If run in client
mode (the default), it will add a map entry keyed by the
target IP address; this map will store RTT measurements, current
sequence number etc.  Finally in client mode the ping command
is executed, and the xdping BPF program will use the last ICMP
reply, reformulate it as an ICMP request with the next sequence
number and XDP_TX it.  After the reply to that request is received
we can measure RTT and repeat until the desired number of
measurements is made.  This is why the sequence numbers in the
normal ping are 1, 2, 3 and 8.  We XDP_TX a modified version
of ICMP reply 4 and keep doing this until we get the 4 replies
we need; hence the networking stack only sees reply 8, where
we have XDP_PASSed it upstream since we are done.

In server mode (-s), xdping simply takes ICMP requests and replies
to them in XDP rather than passing the request up to the networking
stack.  No map entry is required.

xdping can be run in native XDP mode (the default, or specified
via -N) or in skb mode (-S).

A test program test_xdping.sh exercises some of these options.

Note that native XDP does not seem to XDP_TX for veths, hence -N
is not tested.  Looking at the code, it looks like XDP_TX is
supported so I'm not sure if that's expected.  Running xdping in
native mode for ixgbe as both client and server works fine.

Changes since v4

- close fds on cleanup (Song Liu)

Changes since v3

- fixed seq to be __be16 (Song Liu)
- fixed fd checks in xdping.c (Song Liu)

Changes since v2

- updated commit message to explain why seq number of last
  ICMP reply is 8 not 4 (Song Liu)
- updated types of seq number, raddr and eliminated csum variable
  in xdpclient/xdpserver functions as it was not needed (Song Liu)
- added XDPING_DEFAULT_COUNT definition and usage specification of
  default/max counts (Song Liu)

Changes since v1
 - moved from RFC to PATCH
 - removed unused variable in ipv4_csum() (Song Liu)
 - refactored ICMP checks into icmp_check() function called by client
   and server programs and reworked client and server programs due
   to lack of shared code (Song Liu)
 - added checks to ensure that SKB and native mode are not requested
   together (Song Liu)
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2019-05-31

This series contains updates to the iavf driver.

Nathan Chancellor converts the use of gnu_printf to printf.

Aleksandr modifies the driver to limit the number of RSS queues to the
number of online CPUs in order to avoid creating misconfigured RSS
queues.

Gustavo A. R. Silva converts a couple of instances where sizeof() can be
replaced with struct_size().

Alice makes the remaining changes to the iavf driver to cleanup all the
old "i40evf" references in the driver to iavf, including the file names
that still contained the old driver reference.  There was no functional
changes made, just cosmetic to reduce any confusion going forward now
that the iavf driver is the virtual function driver for both i40e and
ice drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There has been quite a few progress around the two steps mentioned in the
answer to the following question:

  Q: BPF 32-bit subregister requirements

This patch updates the answer to reflect what has been done.

v2:
 - Add missing full stop. (Song Liu)
 - Minor tweak on one sentence. (Song Liu)

v1:
 - Integrated rephrase from Quentin and Jakub
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Roman Gushchin says:

====================
During my work on memcg-based memory accounting for bpf maps
I've done some cleanups and refactorings of the existing
memlock rlimit-based code. It makes it more robust, unifies
size to pages conversion, size checks and corresponding error
codes. Also it adds coverage for cgroup local storage and
socket local storage maps.

It looks like some preliminary work on the mm side might be
required to start working on the memcg-based accounting,
so I'm sending these patches as a separate patchset.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Most bpf map types doing similar checks and bytes to pages
conversion during memory allocation and charging.

Let's unify these checks by moving them into bpf_map_charge_init().
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

In order to unify the existing memlock charging code with the
memcg-based memory accounting, which will be added later, let's
rework the current scheme.

Currently the following design is used:
  1) .alloc() callback optionally checks if the allocation will likely
     succeed using bpf_map_precharge_memlock()
  2) .alloc() performs actual allocations
  3) .alloc() callback calculates map cost and sets map.memory.pages
  4) map_create() calls bpf_map_init_memlock() which sets map.memory.user
     and performs actual charging; in case of failure the map is
     destroyed
  <map is in use>
  1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which
     performs uncharge and releases the user
  2) .map_free() callback releases the memory

The scheme can be simplified and made more robust:
  1) .alloc() calculates map cost and calls bpf_map_charge_init()
  2) bpf_map_charge_init() sets map.memory.user and performs actual
    charge
  3) .alloc() performs actual allocations
  <map is in use>
  1) .map_free() callback releases the memory
  2) bpf_map_charge_finish() performs uncharge and releases the user

The new scheme also allows to reuse bpf_map_charge_init()/finish()
functions for memcg-based accounting. Because charges are performed
before actual allocations and uncharges after freeing the memory,
no bogus memory pressure can be created.

In cases when the map structure is not available (e.g. it's not
created yet, or is already destroyed), on-stack bpf_map_memory
structure is used. The charge can be transferred with the
bpf_map_charge_move() function.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Group "user" and "pages" fields of bpf_map into the bpf_map_memory
structure. Later it can be extended with "memcg" and other related
information.

The main reason for a such change (beside cosmetics) is to pass
bpf_map_memory structure to charging functions before the actual
allocation of bpf_map.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Socket local storage maps lack the memlock precharge check,
which is performed before the memory allocation for
most other bpf map types.

Let's add it in order to unify all map types.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Cgroup local storage maps lack the memlock precharge check,
which is performed before the memory allocation for
most other bpf map types.

Let's add it in order to unify all map types.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Lawrence Brakmo says:

====================
This patchset adds support for propagating congestion notifications (cn)
to TCP from cgroup inet skb egress BPF programs.

Current cgroup skb BPF programs cannot trigger TCP congestion window
reductions, even when they drop a packet. This patch-set adds support
for cgroup skb BPF programs to send congestion notifications in the
return value when the packets are TCP packets. Rather than the
current 1 for keeping the packet and 0 for dropping it, they can
now return:
    NET_XMIT_SUCCESS    (0)    - continue with packet output
    NET_XMIT_DROP       (1)    - drop packet and do cn
    NET_XMIT_CN         (2)    - continue with packet output and do cn
    -EPERM                     - drop packet

Finally, HBM programs are modified to collect and return more
statistics.

There has been some discussion regarding the best place to manage
bandwidths. Some believe this should be done in the qdisc where it can
also be managed with a BPF program. We believe there are advantages
for doing it with a BPF program in the cgroup/skb callback. For example,
it reduces overheads in the cases where there is on primary workload and
one or more secondary workloads, where each workload is running on its
own cgroupv2. In this scenario, we only need to throttle the secondary
workloads and there is no overhead for the primary workload since there
will be no BPF program attached to its cgroup.

Regardless, we agree that this mechanism should not penalize those that
are not using it. We tested this by doing 1 byte req/reply RPCs over
loopback. Each test consists of 30 sec of back-to-back 1 byte RPCs.
Each test was repeated 50 times with a 1 minute delay between each set
of 10. We then calculated the average RPCs/sec over the 50 tests. We
compare upstream with upstream + patchset and no BPF program as well
as upstream + patchset and a BPF program that just returns ALLOW_PKT.
Here are the results:

upstream                           80937 RPCs/sec
upstream + patches, no BPF program 80894 RPCs/sec
upstream + patches, BPF program    80634 RPCs/sec

These numbers indicate that there is no penalty for these patches

The use of congestion notifications improves the performance of HBM when
using Cubic. Without congestion notifications, Cubic will not decrease its
cwnd and HBM will need to drop a large percentage of the packets.

The following results are obtained for rate limits of 1Gbps,
between two servers using netperf, and only one flow. We also show how
reducing the max delayed ACK timer can improve the performance when
using Cubic.

Command used was:
  ./do_hbm_test.sh -l -D --stats -N -r=<rate> [--no_cn] [dctcp] \
                   -s=<server running netserver>
  where:
     <rate>   is 1000
     --no_cn  specifies no cwr notifications
     dctcp    uses dctcp

                       Cubic                    DCTCP
Lim, DA      Mbps cwnd cred drops  Mbps cwnd cred drops
--------     ---- ---- ---- -----  ---- ---- ---- -----
  1G, 40       35  462 -320 67%     995    1 -212  0.05%
  1G, 40,cn   736    9  -78  0.07   995    1 -212  0.05
  1G,  5,cn   941    2 -189  0.13   995    1 -212  0.05

Notes:
  --no_cn has no effect with DCTCP
  Lim = rate limit
  DA = maximum delay ack timer
  cred = credit in packets
  drops = % packets dropped

v1->v2: Insures that only BPF_CGROUP_INET_EGRESS can return values 2 and 3
        New egress values apply to all protocols, not just TCP
        Cleaned up patch 4, Update BPF_CGROUP_RUN_PROG_INET_EGRESS callers
        Removed changes to __tcp_transmit_skb (patch 5), no longer needed
        Removed sample use of EDT
v2->v3: Removed the probe timer related changes
v3->v4: Replaced preempt_enable_no_resched() by preempt_enable()
        in BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() macro
====================
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Adds more stats to HBM, including average cwnd and rtt of all TCP
flows, percents of packets that are ecn ce marked and distribution
of return values.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Update hbm_out_kern.c to support returning cn notifications.
Also updates relevant files to allow disabling cn notifications.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Update BPF_CGROUP_RUN_PROG_INET_EGRESS() callers to support returning
congestion notifications from the BPF programs.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

For egress packets, __cgroup_bpf_fun_filter_skb() will now call
BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() instead of PROG_CGROUP_RUN_ARRAY()
in order to propagate congestion notifications (cn) requests to TCP
callers.

For egress packets, this function can return:
   NET_XMIT_SUCCESS    (0)    - continue with packet output
   NET_XMIT_DROP       (1)    - drop packet and notify TCP to call cwr
   NET_XMIT_CN         (2)    - continue with packet output and notify TCP
                                to call cwr
   -EPERM                     - drop packet

For ingress packets, this function will return -EPERM if any attached
program was found and if it returned != 1 during execution. Otherwise 0
is returned.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Allows cgroup inet skb programs to return values in the range [0, 3].
The second bit is used to deterine if congestion occurred and higher
level protocol should decrease rate. E.g. TCP would call tcp_enter_cwr()

The bpf_prog must set expected_attach_type to BPF_CGROUP_INET_EGRESS
at load time if it uses the new return values (i.e. 2 or 3).

The expected_attach_type is currently not enforced for
BPF_PROG_TYPE_CGROUP_SKB.  e.g Meaning the current bpf_prog with
expected_attach_type setting to BPF_CGROUP_INET_EGRESS can attach to
BPF_CGROUP_INET_INGRESS.  Blindly enforcing expected_attach_type will
break backward compatibility.

This patch adds a enforce_expected_attach_type bit to only
enforce the expected_attach_type when it uses the new
return value.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Create new macro BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() to be used by
__cgroup_bpf_run_filter_skb for EGRESS BPF progs so BPF programs can
request cwr for TCP packets.

Current cgroup skb programs can only return 0 or 1 (0 to drop the
packet. This macro changes the behavior so the low order bit
indicates whether the packet should be dropped (0) or not (1)
and the next bit is used for congestion notification (cn).

Hence, new allowed return values of CGROUP EGRESS BPF programs are:
  0: drop packet
  1: keep packet
  2: drop packet and call cwr
  3: keep packet and call cwr

This macro then converts it to one of NET_XMIT values or -EPERM
that has the effect of dropping the packet with no cn.
  0: NET_XMIT_SUCCESS  skb should be transmitted (no cn)
  1: NET_XMIT_DROP     skb should be dropped and cwr called
  2: NET_XMIT_CN       skb should be transmitted and cwr called
  3: -EPERM            skb should be dropped (no cn)

Note that when more than one BPF program is called, the packet is
dropped if at least one of programs requests it be dropped, and
there is cn if at least one program returns cn.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The variable err is assigned with the value -ENOMEM that is never
read and it is re-assigned a new value later on.  The assignment is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable err is initialized with a value that is never read
and err is reassigned a few statements later. This initialization
is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Russell King says:

====================
phylink/sfp updates

This is a series of updates to phylink and sfp:

- Remove an unused net device argument from the phylink MII ioctl
  emulation code.

- add support for using interrupts when using a GPIO for link status
  tracking, rather than polling it at one second intervals.  This
  reduces the need to wakeup the CPU every second.

- add support to the MII ioctl API to read and write Clause 45 PHY
  registers.  I don't know how desirable this is for mainline, but I
  have used this facility extensively to investigate the Marvell
  88x3310 PHY.  A recent illustration of use for this was debugging
  the PHY-without-firmware problem recently reported.

- add mandatory attach/detach methods for the upstream side of sfp
  bus code, which will allow us to remove the "netdev" structure from
  the SFP layers.

- remove the "netdev" structure from the SFP upstream registration
  calls, which simplifies PHY to SFP links.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The sfp-bus code now no longer has any use for the network device
structure, so remove its use.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add attach and detach methods for SFP buses, which will allow us to get
rid of the netdev storage in sfp-bus.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow userspace to generate Clause 45 MII access cycles via phylib.
This is useful for tools such as mii-diag to be able to inspect Clause
45 PHYs.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for using GPIO interrupts with a fixed-link GPIO rather than
polling the GPIO every second and invoking the phylink resolution.  This
avoids unnecessary calls to mac_config().
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The netdev used in the phylink ioctl emulation is never used, so let's
remove it.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The phylink conflict was between a bug fix by Russell King
to make sure we have a consistent PHY interface mode, and
a change in net-next to pull some code in phylink_resolve()
into the helper functions phylink_mac_link_{up,down}()

On the dp83867 side it's mostly overlapping changes, with
the 'net' side removing a condition that was supposed to
trigger for RGMII but because of how it was coded never
actually could trigger.
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a few problems with CONFIG_IPV6=y and
CONFIG_NF_CONNTRACK_BRIDGE=m:

In file included from net/netfilter/utils.c:5:
include/linux/netfilter_ipv6.h: In function 'nf_ipv6_br_defrag':
include/linux/netfilter_ipv6.h:110:9: error: implicit declaration of function 'nf_ct_frag6_gather'; did you mean 'nf_ct_attach'? [-Werror=implicit-function-declaration]

And these too:

net/ipv6/netfilter.c:242:2: error: unknown field 'br_defrag' specified in initializer
net/ipv6/netfilter.c:243:2: error: unknown field 'br_fragment' specified in initializer

This patch includes an original chunk from wenxu.

Fixes: 764dd163 ("netfilter: nf_conntrack_bridge: add support for IPv6")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Yuehaibing <yuehaibing@huawei.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add checksum support for gue encapsulation with the tun_flags parameter,
which could be one of the values below:
IP_VS_TUNNEL_ENCAP_FLAG_NOCSUM
IP_VS_TUNNEL_ENCAP_FLAG_CSUM
IP_VS_TUNNEL_ENCAP_FLAG_REMCSUM
Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This converts all remaining users and then removes skb_make_writable.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This also changes optstrip to only make the tcp header writeable
rather than the entire packet.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Also, make the argument to be only the needed size of the header
we're altering, no need to pull in the full packet into linear area.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

.. so skb_make_writable can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

.. so skb_make_writable can be removed soon.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

like previous patches -- convert conntrack to use the core helper.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

It does the same thing, use it instead so we can remove skb_make_writable.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Back in the day, skb_ensure_writable did not exist.  By now, both functions
have the same precondition:

I. skb_make_writable will test in this order:
  1. wlen > skb->len -> error
  2. if not cloned and wlen <= headlen -> OK
  3. If cloned and wlen bytes of clone writeable -> OK

After those checks, skb is either not cloned but needs to pull from
nonlinear area, or writing to head would also alter data of another clone.

In both cases skb_make_writable will then call __pskb_pull_tail, which will
kmalloc a new memory area to use for skb->head.

IOW, after successful skb_make_writable call, the requested length is in
linear area and can be modified, even if skb was cloned.

II. skb_ensure_writable will do this instead:
   1. call pskb_may_pull.  This handles case 1 above.
      After this, wlen is in linear area, but skb might be cloned.
   2. return if skb is not cloned
   3. return if wlen byte of clone are writeable.
   4. fully copy the skb.

So post-conditions are the same:
*len bytes are writeable in linear area without altering any payload data
of a clone, all header pointers might have been changed.

Only differences are that skb_ensure_writable is in the core, whereas
skb_make_writable lives in netfilter core and the inverted return value.
skb_make_writable returns 0 on error, whereas skb_ensure_writable returns
negative value.

For the normal cases performance is similar:
A. skb is not cloned and in linear area:
   pskb_may_pull is inline helper, so neither function copies.
B. skb is cloned, write is in linear area and clone is writeable:
   both funcions return with step 3.

This series removes skb_make_writable from the kernel.

While at it, pass the needed value instead, its less confusing that way:
There is no special-handling of "0-length" argument in either
skb_make_writable or skb_ensure_writable.

bridge already makes sure ethernet header is in linear area, only purpose
of the make_writable() is is to copy skb->head in case of cloned skbs.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>