- 12 Sep, 2020 18 commits
-
-
Dinghao Liu authored
[ Upstream commit 100e3345 ] hns_nic_dev_probe allocates ndev, but not free it on two error handling paths, which may lead to memleak. Fixes: 63434888 ("net: hns: net: hns: enet adds support of acpi") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
[ Upstream commit 1e105e6a ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit da9125df ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518 ("netfilter: add nftables") Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 6f03bf43 ] Kernel sends an empty NFTA_SET_USERDATA attribute with no value if userspace adds a set with no NFTA_SET_USERDATA attribute. Fixes: e6d8ecac ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e14f633b ] The initialization done by bmips_cpu_setup() typically affects both threads of a given core, on 7435 which supports 2 cores and 2 threads, logical CPU number 2 and 3 would not run this initialization. Fixes: 738a3f79 ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit dbfc95f9 ] When the BMIPS generic cpu-feature-overrides.h file was introduced, cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary cache successfully. Fixes: f337967d ("MIPS: BMIPS: Add cpu-feature-overrides.h") Signed-off-by:
-
Yu Kuai authored
[ Upstream commit 0cef8e2c ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Jussi Kivilinna authored
[ Upstream commit 279e89b2 ] batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@haltian.com> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 303216e7 ] The gateway client code can try to optimize the delivery of DHCP packets to avoid broadcasting them through the whole mesh. But also transmissions to the client can be optimized by looking up the destination via the chaddr of the DHCP packet. But the chaddr is currently only done when chaddr is fully inside the non-paged area of the skbuff. Otherwise it will not be initialized and the unoptimized path should have been taken. But the implementation didn't handle this correctly. It didn't retrieve the correct chaddr but still tried to perform the TT lookup with this uninitialized memory. Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 5b2aa9f9 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d ("dmaengine: of_dma: Support for DMA routers") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.comSigned-off-by:
-
Simon Leiner authored
[ Upstream commit d742db70 ] On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by:
Simon Leiner <simon@leiner.me> Reviewed-by:
Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.meSigned-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Sven Schnelle authored
[ Upstream commit 1196f12a ] Since commit a21ee605 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by:
Sven Schnelle <svens@linux.ibm.com> Reviewed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Jeff Layton authored
[ Upstream commit 496ceaf1 ] Leases don't currently work correctly on kcephfs, as they are not broken when caps are revoked. They could eventually be implemented similarly to how we did them in libcephfs, but for now don't allow them. [ idryomov: no need for simple_nosetlease() in ceph_dir_fops and ceph_snapdir_fops ] Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Amit Engel authored
[ Upstream commit 0d3b6a8d ] Based on nvme spec, when keep alive timeout is set to zero the keep-alive timer should be disabled. Signed-off-by:
Amit Engel <amit.engel@dell.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tom Rix authored
[ Upstream commit cecf7560 ] clang static analysis reports this representative problem applesmc.c:758:10: warning: 1st function call argument is an uninitialized value left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buffer is filled by the earlier call ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ... This problem is reported because a goto skips the status check. Other similar problems use data from applesmc_read_key before checking the status. So move the checks to before the use. Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Henrik Rydberg <rydberg@bitmath.org> Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Kim Phillips authored
commit e48a73a3 upstream. Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf ("perf list: Document precise event sampling for AMD IBS") Signed-off-by:
Kim Phillips <kim.phillips@amd.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tony Jones <tonyj@suse.de> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marc Zyngier authored
commit 35556bed upstream. When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by:
-
Marc Zyngier authored
commit bce1305c upstream. It appears that a ReportSize value of zero is legal, even if a bit non-sensical. Most of the HID code seems to handle that gracefully, except when computing the total size in bytes. When fed as input to memset, this leads to some funky outcomes. Detect the corner case and correctly compute the size. Cc: stable@vger.kernel.org Signed-off-by:
-
- 03 Sep, 2020 22 commits
-
-
Greg Kroah-Hartman authored
Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
-
Hector Martin authored
commit 74a2a7de upstream. As the recent fix addressed the channel swap problem more properly, update the comment as well. Fixes: 1b7ecc24 ("ALSA: usb-audio: work around streaming quirk for MacroSilicon MS2109") Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200816084431.102151-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Peilin Ye authored
commit 25a097f5 upstream. `uref->usage_index` is not always being properly checked, causing hiddev_ioctl_usage() to go out of bounds under some cases. Fix it. Reported-by: syzbot+34ee1b45d88571c2fa8b@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=f2aebe90b8c56806b050a20b36f51ed6acabe802Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Josef Bacik authored
[ Upstream commit fb2fecba ] With my new locking code dbench is so much faster that I tripped over a transaction abort from ENOSPC. This turned out to be because btrfs_del_dir_entries_in_log was checking for ret == -ENOSPC, but this function sets err on error, and returns err. So instead of properly marking the inode as needing a full commit, we were returning -ENOSPC and aborting in __btrfs_unlink_inode. Fix this by checking the proper variable so that we return the correct thing in the case of ENOSPC. The ENOENT needs to be checked, because btrfs_lookup_dir_item_index() can return -ENOENT if the dir item isn't in the tree log (which would happen if we hadn't fsync'ed this guy). We actually handle that case in __btrfs_unlink_inode, so it's an expected error to get back. Fixes: 4a500fd1 ("Btrfs: Metadata ENOSPC handling for tree log") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> [ add note and comment about ENOENT ] Signed-off-by:
-
Alan Stern authored
commit 20934c0d upstream. The PSZ-HA* family of USB disk drives from Sony can't handle the REPORT OPCODES command when using the UAS protocol. This patch adds an appropriate quirks entry. Reported-and-tested-by:
Till Dörges <doerges@pre-sense.de> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200826143229.GB400430@rowland.harvard.eduSigned-off-by:
-
Andy Shevchenko authored
commit bfd08d06 upstream. Inadvertently the commit b1cd1b65 ("USB: gadget: u_f: add overflow checks to VLA macros") makes VLA macros to always return 0 due to different scope of two variables of the same name. Obviously we need to have only one. Fixes: b1cd1b65 ("USB: gadget: u_f: add overflow checks to VLA macros") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Brooke Basile <brookebasile@gmail.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20200826192119.56450-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Brooke Basile authored
commit 2b74b0a0 upstream. Some values extracted by ncm_unwrap_ntb() could possibly lead to several different out of bounds reads of memory. Specifically the values passed to netdev_alloc_skb_ip_align() need to be checked so that memory is not overflowed. Resolve this by applying bounds checking to a number of different indexes and lengths of the structure parsing logic. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Brooke Basile <brookebasile@gmail.com> Acked-by:
Felipe Balbi <balbi@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by:
-
Brooke Basile authored
commit b1cd1b65 upstream. size can potentially hold an overflowed value if its assigned expression is left unchecked, leading to a smaller than needed allocation when vla_group_size() is used by callers to allocate memory. To fix this, add a test for saturation before declaring variables and an overflow check to (n) * sizeof(type). If the expression results in overflow, vla_group_size() will return SIZE_MAX. Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
commit 610b15c5 upstream. In preparation for replacing unchecked overflows for memory allocations, this creates helpers for the 3 most common calculations: array_size(a, b): 2-dimensional array array3_size(a, b, c): 3-dimensional array struct_size(ptr, member, n): struct followed by n-many trailing members Each of these return SIZE_MAX on overflow instead of wrapping around. (Additionally renames a variable named "array_size" to avoid future collision.) Co-developed-by:
Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by:
-
Tang Bin authored
commit 1d416983 upstream. If the function platform_get_irq() failed, the negative value returned will not be detected here. So fix error handling in exynos_ohci_probe(). And when get irq failed, the function platform_get_irq() logs an error message, so remove redundant message here. Fixes: 62194244 ("USB: Add Samsung Exynos OHCI diver") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200826144931.1828-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Cyril Roelandt authored
commit 9aa37788 upstream. This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by:
Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by:
Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.comSigned-off-by:
-
Kai-Heng Feng authored
commit 5967116e upstream. There's another Raydium touchscreen needs the no-lpm quirk: [ 1.339149] usb 1-9: New USB device found, idVendor=2386, idProduct=350e, bcdDevice= 0.00 [ 1.339150] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.339151] usb 1-9: Product: Raydium Touch System [ 1.339152] usb 1-9: Manufacturer: Raydium Corporation ... [ 6.450497] usb 1-9: can't set config #1, error -110 BugLink: https://bugs.launchpad.net/bugs/1889446Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200731051622.28643-1-kai.heng.feng@canonical.comSigned-off-by:
-
Thinh Nguyen authored
commit 9a469bc9 upstream. PNY Pro Elite USB 3.1 Gen 2 device (SSD) doesn't respond to ATA_12 pass-through command (i.e. it just hangs). If it doesn't support this command, it should respond properly to the host. Let's just add a quirk to be able to move forward with other operations. Cc: stable@vger.kernel.org Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Link: https://lore.kernel.org/r/2b0585228b003eedcc82db84697b31477df152e0.1597803605.git.thinhn@synopsys.comSigned-off-by:
-
Alan Stern authored
commit f176ede3 upstream. The syzbot fuzzer identified a bug in the yurex driver: It passes GFP_KERNEL as a memory-allocation flag to usb_submit_urb() at a time when its state is TASK_INTERRUPTIBLE, not TASK_RUNNING: do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000370c7c68>] prepare_to_wait+0xb1/0x2a0 kernel/sched/wait.c:247 WARNING: CPU: 1 PID: 340 at kernel/sched/core.c:7253 __might_sleep+0x135/0x190 kernel/sched/core.c:7253 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 340 Comm: syz-executor677 Not tainted 5.8.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 panic+0x2aa/0x6e1 kernel/panic.c:231 __warn.cold+0x20/0x50 kernel/panic.c:600 report_bug+0x1bd/0x210 lib/bug.c:198 handle_bug+0x41/0x80 arch/x86/kernel/traps.c:234 exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254 asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536 RIP: 0010:__might_sleep+0x135/0x190 kernel/sched/core.c:7253 Code: 65 48 8b 1c 25 40 ef 01 00 48 8d 7b 10 48 89 fe 48 c1 ee 03 80 3c 06 00 75 2b 48 8b 73 10 48 c7 c7 e0 9e 06 86 e8 ed 12 f6 ff <0f> 0b e9 46 ff ff ff e8 1f b2 4b 00 e9 29 ff ff ff e8 15 b2 4b 00 RSP: 0018:ffff8881cdb77a28 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881c6458000 RCX: 0000000000000000 RDX: ffff8881c6458000 RSI: ffffffff8129ec93 RDI: ffffed1039b6ef37 RBP: ffffffff86fdade2 R08: 0000000000000001 R09: ffff8881db32f54f R10: 0000000000000000 R11: 0000000030343354 R12: 00000000000001f2 R13: 0000000000000000 R14: 0000000000000068 R15: ffffffff83c1b1aa slab_pre_alloc_hook.constprop.0+0xea/0x200 mm/slab.h:498 slab_alloc_node mm/slub.c:2816 [inline] slab_alloc mm/slub.c:2900 [inline] kmem_cache_alloc_trace+0x46/0x220 mm/slub.c:2917 kmalloc include/linux/slab.h:554 [inline] dummy_urb_enqueue+0x7a/0x880 drivers/usb/gadget/udc/dummy_hcd.c:1251 usb_hcd_submit_urb+0x2b2/0x22d0 drivers/usb/core/hcd.c:1547 usb_submit_urb+0xb4e/0x13e0 drivers/usb/core/urb.c:570 yurex_write+0x3ea/0x820 drivers/usb/misc/yurex.c:495 This patch changes the call to use GFP_ATOMIC instead of GFP_KERNEL. Reported-and-tested-by: syzbot+c2c3302f9c601a4b1be2@syzkaller.appspotmail.com Signed-off-by:
-
Heikki Krogerus authored
commit c15e1bdd upstream. When the primary firmware node pointer is removed from a device (set to NULL) the secondary firmware node pointer, when it exists, is made the primary node for the device. However, the secondary firmware node pointer of the original primary firmware node is never cleared (set to NULL). To avoid situation where the secondary firmware node pointer is pointing to a non-existing object, clearing it properly when the primary node is removed from a device in set_primary_fwnode(). Fixes: 97badf87 ("device property: Make it possible to use secondary firmware nodes") Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rafael J. Wysocki authored
commit e3eb6e8f upstream. It has been reported that system-wide suspend may be aborted in the absence of any wakeup events due to unforseen interactions of it with the runtume PM framework. One failing scenario is when there are multiple devices sharing an ACPI power resource and runtime-resume needs to be carried out for one of them during system-wide suspend (for example, because it needs to be reconfigured before the whole system goes to sleep). In that case, the runtime-resume of that device involves turning the ACPI power resource "on" which in turn causes runtime-resume requests to be queued up for all of the other devices sharing it. Those requests go to the runtime PM workqueue which is frozen during system-wide suspend, so they are not actually taken care of until the resume of the whole system, but the pm_runtime_barrier() call in __device_suspend() sees them and triggers system wakeup events for them which then cause the system-wide suspend to be aborted if wakeup source objects are in active use. Of course, the logic that leads to triggering those wakeup events is questionable in the first place, because clearly there are cases in which a pending runtime resume request for a device is not connected to any real wakeup events in any way (like the one above). Moreover, it is racy, because the device may be resuming already by the time the pm_runtime_barrier() runs and so if the driver doesn't take care of signaling the wakeup event as appropriate, it will be lost. However, if the driver does take care of that, the extra pm_wakeup_event() call in the core is redundant. Accordingly, drop the conditional pm_wakeup_event() call fron __device_suspend() and make the latter call pm_runtime_barrier() alone. Also modify the comment next to that call to reflect the new code and extend it to mention the need to avoid unwanted interactions between runtime PM and system-wide device suspend callbacks. Fixes: 1e2ef05b ("PM: Limit race conditions between runtime PM and system sleep (v2)") Signed-off-by:
Utkarsh H Patel <utkarsh.h.patel@intel.com> Tested-by:
Pengfei Xu <pengfei.xu@intel.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 904df64a upstream. Sometimes re-plugging a USB device during system sleep renders the device useless: [ 173.418345] xhci_hcd 0000:00:14.0: Get port status 2-4 read: 0x14203e2, return 0x10262 ... [ 176.496485] usb 2-4: Waited 2000ms for CONNECT [ 176.496781] usb usb2-port4: status 0000.0262 after resume, -19 [ 176.497103] usb 2-4: can't resume, status -19 [ 176.497438] usb usb2-port4: logical disconnect Because PLS equals to XDEV_RESUME, xHCI driver reports U3 to usbcore, despite of CAS bit is flagged. So proritize CAS over XDEV_RESUME to let usbcore handle warm-reset for the port. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200821091549.20556-3-mathias.nyman@linux.intel.comSigned-off-by:
-
Thomas Gleixner authored
XEN uses irqdesc::irq_data_common::handler_data to store a per interrupt XEN data pointer which contains XEN specific information. commit c330fb1d upstream. handler data is meant for interrupt handlers and not for storing irq chip specific information as some devices require handler data to store internal per interrupt information, e.g. pinctrl/GPIO chained interrupt handlers. This obviously creates a conflict of interests and crashes the machine because the XEN pointer is overwritten by the driver pointer. As the XEN data is not handler specific it should be stored in irqdesc::irq_data::chip_data instead. A simple sed s/irq_[sg]et_handler_data/irq_[sg]et_chip_data/ cures that. Cc: stable@vger.kernel.org Reported-by:
Roman Shaposhnik <roman@zededa.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
-
Jan Kara authored
commit f9cae926 upstream. When we are processing writeback for sync(2), move_expired_inodes() didn't set any inode expiry value (older_than_this). This can result in writeback never completing if there's steady stream of inodes added to b_dirty_time list as writeback rechecks dirty lists after each writeback round whether there's more work to be done. Fix the problem by using sync(2) start time is inode expiry value when processing b_dirty_time list similarly as for ordinarily dirtied inodes. This requires some refactoring of older_than_this handling which simplifies the code noticeably as a bonus. Fixes: 0ae45f63 ("vfs: add support for a lazytime mount option") CC: stable@vger.kernel.org Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 5afced3b upstream. Inode's i_io_list list head is used to attach inode to several different lists - wb->{b_dirty, b_dirty_time, b_io, b_more_io}. When flush worker prepares a list of inodes to writeback e.g. for sync(2), it moves inodes to b_io list. Thus it is critical for sync(2) data integrity guarantees that inode is not requeued to any other writeback list when inode is queued for processing by flush worker. That's the reason why writeback_single_inode() does not touch i_io_list (unless the inode is completely clean) and why __mark_inode_dirty() does not touch i_io_list if I_SYNC flag is set. However there are two flaws in the current logic: 1) When inode has only I_DIRTY_TIME set but it is already queued in b_io list due to sync(2), concurrent __mark_inode_dirty(inode, I_DIRTY_SYNC) can still move inode back to b_dirty list resulting in skipping writeback of inode time stamps during sync(2). 2) When inode is on b_dirty_time list and writeback_single_inode() races with __mark_inode_dirty() like: writeback_single_inode() __mark_inode_dirty(inode, I_DIRTY_PAGES) inode->i_state |= I_SYNC __writeback_single_inode() inode->i_state |= I_DIRTY_PAGES; if (inode->i_state & I_SYNC) bail if (!(inode->i_state & I_DIRTY_ALL)) - not true so nothing done We end up with I_DIRTY_PAGES inode on b_dirty_time list and thus standard background writeback will not writeback this inode leading to possible dirty throttling stalls etc. (thanks to Martijn Coenen for this analysis). Fix these problems by tracking whether inode is queued in b_io or b_more_io lists in a new I_SYNC_QUEUED flag. When this flag is set, we know flush worker has queued inode and we should not touch i_io_list. On the other hand we also know that once flush worker is done with the inode it will requeue the inode to appropriate dirty list. When I_SYNC_QUEUED is not set, __mark_inode_dirty() can (and must) move inode to appropriate dirty list. Reported-by:
Martijn Coenen <maco@android.com> Reviewed-by:
-
Jan Kara authored
commit b35250c0 upstream. Currently, operations on inode->i_io_list are protected by wb->list_lock. In the following patches we'll need to maintain consistency between inode->i_state and inode->i_io_list so change the code so that inode->i_lock protects also all inode's i_io_list handling. Reviewed-by:
-
Sergey Senozhatsky authored
commit 205d300a upstream. We have a number of "uart.port->desc.lock vs desc.lock->uart.port" lockdep reports coming from 8250 driver; this causes a bit of trouble to people, so let's fix it. The problem is reverse lock order in two different call paths: chain #1: serial8250_do_startup() spin_lock_irqsave(&port->lock); disable_irq_nosync(port->irq); raw_spin_lock_irqsave(&desc->lock) chain #2: __report_bad_irq() raw_spin_lock_irqsave(&desc->lock) for_each_action_of_desc() printk() spin_lock_irqsave(&port->lock); Fix this by changing the order of locks in serial8250_do_startup(): do disable_irq_nosync() first, which grabs desc->lock, and grab uart->port after that, so that chain #1 and chain #2 have same lock order. Full lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.4.39 #55 Not tainted ====================================================== swapper/0/0 is trying to acquire lock: ffffffffab65b6c0 (console_owner){-...}, at: console_lock_spinning_enable+0x31/0x57 but task is already holding lock: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&irq_desc_lock_class){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d __irq_get_desc_lock+0x65/0x89 __disable_irq_nosync+0x3b/0x93 serial8250_do_startup+0x451/0x75c uart_startup+0x1b4/0x2ff uart_port_activate+0x73/0xa0 tty_port_open+0xae/0x10a uart_open+0x1b/0x26 tty_open+0x24d/0x3a0 chrdev_open+0xd5/0x1cc do_dentry_open+0x299/0x3c8 path_openat+0x434/0x1100 do_filp_open+0x9b/0x10a do_sys_open+0x15f/0x3d7 kernel_init_freeable+0x157/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x61/0x8d serial8250_console_write+0xa7/0x2a0 console_unlock+0x3b7/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 register_console+0x336/0x3a4 uart_add_one_port+0x51b/0x5be serial8250_register_8250_port+0x454/0x55e dw8250_probe+0x4dc/0x5b9 platform_drv_probe+0x67/0x8b really_probe+0x14a/0x422 driver_probe_device+0x66/0x130 device_driver_attach+0x42/0x5b __driver_attach+0xca/0x139 bus_for_each_dev+0x97/0xc9 bus_add_driver+0x12b/0x228 driver_register+0x64/0xed do_one_initcall+0x20c/0x4a6 do_initcall_level+0xb5/0xc5 do_basic_setup+0x4c/0x58 kernel_init_freeable+0x13f/0x1dd kernel_init+0xe/0x105 ret_from_fork+0x27/0x50 -> #0 (console_owner){-...}: __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 console_lock_spinning_enable+0x51/0x57 console_unlock+0x25d/0x528 vprintk_emit+0x111/0x17f printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 ret_from_intr+0x0/0x1d cpuidle_enter_state+0x12f/0x1fd cpuidle_enter+0x2e/0x3d do_idle+0x1ce/0x2ce cpu_startup_entry+0x1d/0x1f start_kernel+0x406/0x46a secondary_startup_64+0xa4/0xb0 other info that might help us debug this: Chain exists of: console_owner --> &port_lock_key --> &irq_desc_lock_class Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&irq_desc_lock_class); lock(&port_lock_key); lock(&irq_desc_lock_class); lock(console_owner); *** DEADLOCK *** 2 locks held by swapper/0/0: #0: ffff88810a8e34c0 (&irq_desc_lock_class){-.-.}, at: __report_bad_irq+0x5b/0xba #1: ffffffffab65b5c0 (console_lock){+.+.}, at: console_trylock_spinning+0x20/0x181 stack backtrace: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.39 #55 Hardware name: XXXXXX Call Trace: <IRQ> dump_stack+0xbf/0x133 ? print_circular_bug+0xd6/0xe9 check_noncircular+0x1b9/0x1c3 __lock_acquire+0x118d/0x2714 lock_acquire+0x203/0x258 ? console_lock_spinning_enable+0x31/0x57 console_lock_spinning_enable+0x51/0x57 ? console_lock_spinning_enable+0x31/0x57 console_unlock+0x25d/0x528 ? console_trylock+0x18/0x4e vprintk_emit+0x111/0x17f ? lock_acquire+0x203/0x258 printk+0x59/0x73 __report_bad_irq+0xa3/0xba note_interrupt+0x19a/0x1d6 handle_irq_event_percpu+0x57/0x79 handle_irq_event+0x36/0x55 handle_fasteoi_irq+0xc2/0x18a do_IRQ+0xb3/0x157 common_interrupt+0xf/0xf </IRQ> Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Fixes: 768aec0b ("serial: 8250: fix shared interrupts issues with SMP and RT kernels") Reported-by:
Raul Rangel <rrangel@google.com> BugLink: https://bugs.chromium.org/p/chromium/issues/detail?id=1114800 Link: https://lore.kernel.org/lkml/CAHQZ30BnfX+gxjPm1DUd5psOTqbyDh4EJE=2=VAMW_VDafctkA@mail.gmail.com/T/#uReviewed-by:
-
