It is mandatory for a software to issue a reset upon modifying RGMII
Receive Timing Control and RGMII Transmit Timing Control bit fields of MAC
Specific Control register 2 (page 2, register 21) otherwise the changes
won't be perceived by the PHY (the same is applicable for a lot of other
registers). Not setting the RGMII delays on the platforms that imply it'
being done on the PHY side will consequently cause the traffic loss. We
discovered that the denoted soft-reset is missing in the
m88e1121_config_aneg() method for the case if the RGMII delays are
modified but the MDIx polarity isn't changed or the auto-negotiation is
left enabled, thus causing the traffic loss on our platform with Marvell
Alaska 88E1510 installed. Let's fix that by issuing the soft-reset if the
delays have been actually set in the m88e1121_config_aneg_rgmii_delays()
method.

Cc: stable@vger.kernel.org
Fixes: d6ab9336 ("net: phy: marvell: Avoid unnecessary soft reset")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20220205203932.26899-1-Pavel.Parkhomenko@baikalelectronics.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>

My last patch moved the netdev_tracker_alloc() call to a section
protected by a write_lock().

I should have replaced GFP_KERNEL with GFP_ATOMIC to avoid the infamous:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:256

Fixes: 28f92221 ("net/smc: fix ref_tracker issue in smc_pnet_add()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I added the netdev_tracker_alloc() right after ndev was
stored into the newly allocated object:

  new_pe->ndev = ndev;
  if (ndev)
      netdev_tracker_alloc(ndev, &new_pe->dev_tracker, GFP_KERNEL);

But I missed that later, we could end up freeing new_pe,
then calling dev_put(ndev) to release the reference on ndev.

The new_pe->dev_tracker would not be freed.

To solve this issue, move the netdev_tracker_alloc() call to
the point we know for sure new_pe will be kept.

syzbot report (on net-next tree, but the bug is present in net tree)
WARNING: CPU: 0 PID: 6019 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 6019 Comm: syz-executor.3 Not tainted 5.17.0-rc2-syzkaller-00650-g5a8fb33e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d f4 70 a0 09 31 ff 89 de e8 4d bc 99 fd 84 db 75 e0 e8 64 b8 99 fd 48 c7 c7 20 0c 06 8a c6 05 d4 70 a0 09 01 e8 9e 4e 28 05 <0f> 0b eb c4 e8 48 b8 99 fd 0f b6 1d c3 70 a0 09 31 ff 89 de e8 18
RSP: 0018:ffffc900043b7400 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000040000 RSI: ffffffff815fb318 RDI: fffff52000876e72
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815f507e R11: 0000000000000000 R12: 1ffff92000876e85
R13: 0000000000000000 R14: ffff88805c1c6600 R15: 0000000000000000
FS:  00007f1ef6feb700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2d02b000 CR3: 00000000223f4000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 __refcount_dec include/linux/refcount.h:344 [inline]
 refcount_dec include/linux/refcount.h:359 [inline]
 ref_tracker_free+0x53f/0x6c0 lib/ref_tracker.c:119
 netdev_tracker_free include/linux/netdevice.h:3867 [inline]
 dev_put_track include/linux/netdevice.h:3884 [inline]
 dev_put_track include/linux/netdevice.h:3880 [inline]
 dev_put include/linux/netdevice.h:3910 [inline]
 smc_pnet_add_eth net/smc/smc_pnet.c:399 [inline]
 smc_pnet_enter net/smc/smc_pnet.c:493 [inline]
 smc_pnet_add+0x5fc/0x15f0 net/smc/smc_pnet.c:556
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
 netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
 sock_sendmsg_nosec net/socket.c:705 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:725
 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: b6064524 ("net/smc: add net device tracker to struct smc_pnetentry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When setting up autonegotiation for 88E1118R and compatible PHYs,
a software reset of PHY is issued before setting up polarity.
This is incorrect as changes of MDI Crossover Mode bits are
disruptive to the normal operation and must be followed by a
software reset to take effect. Let's patch m88e1118_config_aneg()
to fix the issue mentioned before by invoking software reset
of the PHY just after setting up MDI-x polarity.

Fixes: 605f196e ("phy: Add support for Marvell 88E1118 PHY")
Signed-off-by: Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The filters for the PTP trap keys are incorrectly configured, in the
sense that is2_entry_set() only looks at trap->key.ipv4.dport or
trap->key.ipv6.dport if trap->key.ipv4.proto or trap->key.ipv6.proto is
set to IPPROTO_TCP or IPPROTO_UDP.

But we don't do that, so is2_entry_set() goes through the "else" branch
of the IP protocol check, and ends up installing a rule for "Any IP
protocol match" (because msk is also 0). The UDP port is ignored.

This means that when we run "ptp4l -i swp0 -4", all IP traffic is
trapped to the CPU, which hinders bridging.

Fix this by specifying the IP protocol in the VCAP IS2 filters for PTP
over UDP.

Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot found that mixing sendpage() and sendmsg(MSG_ZEROCOPY)
calls over the same TCP socket would again trigger the
infamous warning in inet_sock_destruct()

	WARN_ON(sk_forward_alloc_get(sk));

While Talal took into account a mix of regular copied data
and MSG_ZEROCOPY one in the same skb, the sendpage() path
has been forgotten.

We want the charging to happen for sendpage(), because
pages could be coming from a pipe. What is missing is the
downgrading of pure zerocopy status to make sure
sk_forward_alloc will stay synced.

Add tcp_downgrade_zcopy_pure() helper so that we can
use it from the two callers.

Fixes: 9b65b17d ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20220203225547.665114-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Don't refresh timeout for SCTP flows in CLOSED state.

2) Don't allow access to transport header if fragment offset is set on.

3) Reinitialize internal conntrack state for retransmitted TCP
   syn-ack packet.

4) Update MAINTAINER file to add the Netfilter group tree. Moving
   forward, Florian Westphal has access to this tree so he can also
   send pull requests.

5) Set on IPS_HELPER for entries created via ctnetlink, otherwise NAT
   might zap it.

All patches from Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: ctnetlink: disable helper autoassign
  MAINTAINERS: netfilter: update git links
  netfilter: conntrack: re-init state for retransmitted syn-ack
  netfilter: conntrack: move synack init code to helper
  netfilter: nft_payload: don't allow th access for fragments
  netfilter: conntrack: don't refresh sctp entries in closed state
====================

Link: https://lore.kernel.org/r/20220204151903.320786-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

From 4.17 onwards the ixgbevf driver uses build_skb() to build an skb
around new data in the page buffer shared with the ixgbe PF.
This uses either a 2K or 3K buffer, and offsets the DMA mapping by
NET_SKB_PAD + NET_IP_ALIGN. When using a smaller buffer RXDCTL is set to
ensure the PF does not write a full 2K bytes into the buffer, which is
actually 2K minus the offset.

However on the 82599 virtual function, the RXDCTL mechanism is not
available. The driver attempts to work around this by using the SET_LPE
mailbox method to lower the maximm frame size, but the ixgbe PF driver
ignores this in order to keep the PF and all VFs in sync[0].

This means the PF will write up to the full 2K set in SRRCTL, causing it
to write NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the buffer.
With 4K pages split into two buffers, this means it either writes
NET_SKB_PAD + NET_IP_ALIGN bytes past the first buffer (and into the
second), or NET_SKB_PAD + NET_IP_ALIGN bytes past the end of the DMA
mapping.

Avoid this by only enabling build_skb when using "large" buffers (3K).
These are placed in each half of an order-1 page, preventing the PF from
writing past the end of the mapping.

[0]: Technically it only ever raises the max frame size, see
ixgbe_set_vf_lpe() in ixgbe_sriov.c

Fixes: f15c5ba5 ("ixgbevf: add support for using order 1 pages to receive large frames")
Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When userspace, e.g. conntrackd, inserts an entry with a specified helper,
its possible that the helper is lost immediately after its added:

ctnetlink_create_conntrack
  -> nf_ct_helper_ext_add + assign helper
    -> ctnetlink_setup_nat
      -> ctnetlink_parse_nat_setup
         -> parse_nat_setup -> nfnetlink_parse_nat_setup
	                       -> nf_nat_setup_info
                                 -> nf_conntrack_alter_reply
                                   -> __nf_ct_try_assign_helper

... and __nf_ct_try_assign_helper will zero the helper again.

Set IPS_HELPER bit to bypass auto-assign logic, its unwanted, just like
when helper is assigned via ruleset.

Dropped old 'not strictly necessary' comment, it referred to use of
rcu_assign_pointer() before it got replaced by RCU_INIT_POINTER().

NB: Fixes tag intentionally incorrect, this extends the referenced commit,
but this change won't build without IPS_HELPER introduced there.

Fixes: 6714cf54 ("netfilter: nf_conntrack: fix explicit helper attachment and NAT")
Reported-by: Pham Thanh Tuyen <phamtyn@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

nf and nf-next have a new location.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

TCP conntrack assumes that a syn-ack retransmit is identical to the
previous syn-ack.  This isn't correct and causes stuck 3whs in some more
esoteric scenarios.  tcpdump to illustrate the problem:

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083035583 ecr 0,wscale 7]
 server > client: Flags [S.] seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215367629 ecr 2082921663]

Note the invalid/outdated synack ack number.
Conntrack marks this syn-ack as out-of-window/invalid, but it did
initialize the reply direction parameters based on this packets content.

 client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083036623 ecr 0,wscale 7]

... retransmit...

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215368644 ecr 2082921663]

and another bogus synack. This repeats, then client re-uses for a new
attempt:

client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083100223 ecr 0,wscale 7]
server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215430754 ecr 2082921663]

... but still gets a invalid syn-ack.

This repeats until:

 server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215437785 ecr 2082921663]
 server > client: Flags [R.], seq 145824454, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215443451 ecr 2082921663]
 client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083115583 ecr 0,wscale 7]
 server > client: Flags [S.], seq 162602410, ack 2375731742, win 65535, [mss 8952,wscale 5,TS val 3215445754 ecr 2083115583]

This syn-ack has the correct ack number, but conntrack flags it as
invalid: The internal state was created from the first syn-ack seen
so the sequence number of the syn-ack is treated as being outside of
the announced window.

Don't assume that retransmitted syn-ack is identical to previous one.
Treat it like the first syn-ack and reinit state.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

It seems more readable to use a common helper in the followup fix rather
than copypaste or goto.

No functional change intended.  The function is only called for syn-ack
or syn in repy direction in case of simultaneous open.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Loads relative to ->thoff naturally expect that this points to the
transport header, but this is only true if pkt->fragoff == 0.

This has little effect for rulesets with connection tracking/nat because
these enable ip defra. For other rulesets this prevents false matches.

Fixes: 96518518 ("netfilter: add nftables")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Vivek Thrivikraman reported:
 An SCTP server application which is accessed continuously by client
 application.
 When the session disconnects the client retries to establish a connection.
 After restart of SCTP server application the session is not established
 because of stale conntrack entry with connection state CLOSED as below.

 (removing this entry manually established new connection):

 sctp 9 CLOSED src=10.141.189.233 [..]  [ASSURED]

Just skip timeout update of closed entries, we don't want them to
stay around forever.
Reported-and-tested-by: Vivek Thrivikraman <vivek.thrivikraman@est.tech>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This problem was found with Sparx5 when the tcpdump tool requests the
do_get_stats64 (sparx5_get_stats64) statistic.

The portstats pointer was incorrectly incremented when fetching priority
based statistics.

Fixes: af4b1102 (net: sparx5: add ethtool configuration and statistics support)
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220203102900.528987-1-steen.hegelund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

While the stackleak plugin was already using notrace, objtool is now a
bit more picky.  Update the notrace uses to noinstr.  Silences the
following objtool warnings when building with:

CONFIG_DEBUG_ENTRY=y
CONFIG_STACK_VALIDATION=y
CONFIG_VMLINUX_VALIDATION=y
CONFIG_GCC_PLUGIN_STACKLEAK=y

  vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section
  vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section

Note that the plugin's addition of calls to stackleak_track_stack() from
noinstr functions is expected to be safe, as it isn't runtime
instrumentation and is self-contained.

Cc: Alexander Popov <alex.popov@linux.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, netfilter, and ieee802154.

  Current release - regressions:

   - Partially revert "net/smc: Add netlink net namespace support", fix
     uABI breakage

   - netfilter:
      - nft_ct: fix use after free when attaching zone template
      - nft_byteorder: track register operations

  Previous releases - regressions:

   - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback

   - phy: qca8081: fix speeds lower than 2.5Gb/s

   - sched: fix use-after-free in tc_new_tfilter()

  Previous releases - always broken:

   - tcp: fix mem under-charging with zerocopy sendmsg()

   - tcp: add missing tcp_skb_can_collapse() test in
     tcp_shift_skb_data()

   - neigh: do not trigger immediate probes on NUD_FAILED from
     neigh_managed_work, avoid a deadlock

   - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN
     false-positives

   - netfilter: nft_reject_bridge: fix for missing reply from prerouting

   - smc: forward wakeup to smc socket waitqueue after fallback

   - ieee802154:
      - return meaningful error codes from the netlink helpers
      - mcr20a: fix lifs/sifs periods
      - at86rf230, ca8210: stop leaking skbs on error paths

   - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent

   - ax25: add refcount in ax25_dev to avoid UAF bugs

   - eth: mlx5e:
      - fix SFP module EEPROM query
      - fix broken SKB allocation in HW-GRO
      - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows

   - eth: amd-xgbe:
      - fix skb data length underflow
      - ensure reset of the tx_timer_active flag, avoid Tx timeouts

   - eth: stmmac: fix runtime pm use in stmmac_dvr_remove()

   - eth: e1000e: handshake with CSME starts from Alder Lake platforms"

* tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  ax25: fix reference count leaks of ax25_dev
  net: stmmac: ensure PTP time register reads are consistent
  net: ipa: request IPA register values be retained
  dt-bindings: net: qcom,ipa: add optional qcom,qmp property
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work
  tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data()
  net: sparx5: do not refer to skb after passing it on
  Partially revert "net/smc: Add netlink net namespace support"
  net/mlx5e: Avoid field-overflowing memcpy()
  net/mlx5e: Use struct_group() for memcpy() region
  net/mlx5e: Avoid implicit modify hdr for decap drop rule
  net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic
  net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic
  net/mlx5e: Don't treat small ceil values as unlimited in HTB offload
  net/mlx5: E-Switch, Fix uninitialized variable modact
  net/mlx5e: Fix handling of wrong devices during bond netevent
  net/mlx5e: Fix broken SKB allocation in HW-GRO
  net/mlx5e: Fix wrong calculation of header index in HW_GRO
  ...

Pull selinux fix from Paul Moore:
 "One small SELinux patch to ensure that a policy structure field is
  properly reset after freeing so that we don't inadvertently do a
  double-free on certain error conditions"

* tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix double free of cond_list on error paths

Merge tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Important fixes to several tests and documentation clarification on
  running mainline kselftest on stable releases. A few notable fixes:

   - fix kselftest run hang due to child processes that haven't been
     terminated. Fix signals all child processes

   - fix false pass/fail results from vdso_test_abi, openat2, mincore

   - build failures when using -j (multiple jobs) option

   - exec test build failure due to incorrect build rule for a run-time
     created "pipe"

   - zram test fixes related to interaction with zram-generator to make
     sure zram test to coordinate deleted with zram-generator

   - zram test compression ratio calculation fix and skipping
     max_comp_streams.

   - increasing rtc test timeout

   - cpufreq test to write test results to stdout which will necessary
     on automated test systems"

* tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kselftest: Fix vdso_test_abi return status
  selftests: skip mincore.check_file_mmap when fs lacks needed support
  selftests: openat2: Skip testcases that fail with EOPNOTSUPP
  selftests: openat2: Add missing dependency in Makefile
  selftests: openat2: Print also errno in failure messages
  selftests: futex: Use variable MAKE instead of make
  selftests/exec: Remove pipe from TEST_GEN_FILES
  selftests/zram: Adapt the situation that /dev/zram0 is being used
  selftests/zram01.sh: Fix compression ratio calculation
  selftests/zram: Skip max_comp_streams interface on newer kernel
  docs/kselftest: clarify running mainline tests on stables
  kselftest: signal all child processes
  selftests: cpufreq: Write test output to stdout as well
  selftests: rtc: Increase test timeout so that all tests run

The previous commit d01ffb9e ("ax25: add refcount in ax25_dev
to avoid UAF bugs") introduces refcount into ax25_dev, but there
are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(),
ax25_rt_add(), ax25_rt_del() and ax25_rt_opt().

This patch uses ax25_dev_put() and adjusts the position of
ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev.

Fixes: d01ffb9e ("ax25: add refcount in ax25_dev to avoid UAF bugs")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220203150811.42256-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Even if protected from preemption and interrupts, a small time window
remains when the 2 register reads could return inconsistent values,
each time the "seconds" register changes. This could lead to an about
1-second error in the reported time.

Add logic to ensure the "seconds" and "nanoseconds" values are consistent.

Fixes: 92ba6888 ("stmmac: add the support for PTP hw clock driver")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220203160025.750632-1-yannick.vignon@oss.nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2022-02-03

We've added 6 non-merge commits during the last 10 day(s) which contain
a total of 7 files changed, 11 insertions(+), 236 deletions(-).

The main changes are:

1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC
   flag which otherwise trips over KASAN, from Hou Tao.

2) Fix unresolved symbol warning in resolve_btfids due to LSM callback
   rename, from Alexei Starovoitov.

3) Fix a possible race in inc_misses_counter() when IRQ would trigger
   during counter update, from He Fengqing.

4) Fix tooling infra for cross-building with clang upon probing whether
   gcc provides the standard libraries, from Jean-Philippe Brucker.

5) Fix silent mode build for resolve_btfids, from Nathan Chancellor.

6) Drop unneeded and outdated lirc.h header copy from tooling infra as
   BPF does not require it anymore, from Sean Young.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  tools/resolve_btfids: Do not print any commands when building silently
  bpf: Use VM_MAP instead of VM_ALLOC for ringbuf
  tools: Ignore errors from `which' when searching a GCC toolchain
  tools headers UAPI: remove stale lirc.h
  bpf: Fix possible race in inc_misses_counter
  bpf: Fix renaming task_getsecid_subj->current_getsecid_subj.
====================

Link: https://lore.kernel.org/r/20220203155815.25689-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to
kernel/printk/sysctl.c introduced an incorrect __user attribute to the
buffer argument.  I spotted this change in [1] as well as the kernel
test robot.  Revert this change to please sparse:

  kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces)
  kernel/printk/sysctl.c:20:51:    expected void *
  kernel/printk/sysctl.c:20:51:    got void [noderef] __user *buffer

Fixes: faaa357a ("printk: move printk sysctl to printk/sysctl.c")
Link: https://lore.kernel.org/r/20220104155024.48023-2-mic@digikod.net [1]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20220203145029.272640-1-mic@digikod.netSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 774a1221.

We need to finish all async code before the module init sequence is
done.  In the reverted commit the PF_USED_ASYNC flag was added to mark a
thread that called async_schedule().  Then the PF_USED_ASYNC flag was
used to determine whether or not async_synchronize_full() needs to be
invoked.  This works when modprobe thread is calling async_schedule(),
but it does not work if module dispatches init code to a worker thread
which then calls async_schedule().

For example, PCI driver probing is invoked from a worker thread based on
a node where device is attached:

	if (cpu < nr_cpu_ids)
		error = work_on_cpu(cpu, local_pci_probe, &ddi);
	else
		error = local_pci_probe(&ddi);

We end up in a situation where a worker thread gets the PF_USED_ASYNC
flag set instead of the modprobe thread.  As a result,
async_synchronize_full() is not invoked and modprobe completes without
waiting for the async code to finish.

The issue was discovered while loading the pm80xx driver:
(scsi_mod.scan=async)

modprobe pm80xx                      worker
...
  do_init_module()
  ...
    pci_call_probe()
      work_on_cpu(local_pci_probe)
                                     local_pci_probe()
                                       pm8001_pci_probe()
                                         scsi_scan_host()
                                           async_schedule()
                                           worker->flags |= PF_USED_ASYNC;
                                     ...
      < return from worker >
  ...
  if (current->flags & PF_USED_ASYNC) <--- false
  	async_synchronize_full();

Commit 21c3c5d2 ("block: don't request module during elevator init")
fixed the deadlock issue which the reverted commit 774a1221
("module, async: async_synchronize_full() on module init iff async is
used") tried to fix.

Since commit 0fdff3ec ("async, kmod: warn on synchronous
request_module() from async workers") synchronous module loading from
async is not allowed.

Given that the original deadlock issue is fixed and it is no longer
allowed to call synchronous request_module() from async we can remove
PF_USED_ASYNC flag to make module init consistently invoke
async_synchronize_full() unless async module probe is requested.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Changyuan Lyu <changyuanl@google.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull cgroup fixes from Tejun Heo:

 - Eric's fix for a long standing cgroup1 permission issue where it only
   checks for uid 0 instead of CAP which inadvertently allows
   unprivileged userns roots to modify release_agent userhelper

 - Fixes for the fallout from Waiman's recent cpuset work

* 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning
  cgroup-v1: Require capabilities to set release_agent
  cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask()
  cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy

Alex Elder says:

====================
net: ipa: enable register retention

With runtime power management in place, we sometimes need to issue
a command to enable retention of IPA register values before power
collapse.  This requires a new Device Tree property, whose presence
will also be used to signal that the command is required.
====================

Link: https://lore.kernel.org/r/20220201150205.468403-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In some cases, the IPA hardware needs to request the always-on
subsystem (AOSS) to coordinate with the IPA microcontroller to
retain IPA register values at power collapse.  This is done by
issuing a QMP request to the AOSS microcontroller.  A similar
request ondoes that request.

We must get and hold the "QMP" handle early, because we might get
back EPROBE_DEFER for that.  But the actual request should be sent
while we know the IPA clock is active, and when we know the
microcontroller is operational.

Fixes: 1aac309d ("net: ipa: use autosuspend")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

For some systems, the IPA driver must make a request to ensure that
its registers are retained across power collapse of the IPA hardware.
On such systems, we'll use the existence of the "qcom,qmp" property
as a signal that this request is required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

It was found that a "suspicious RCU usage" lockdep warning was issued
with the rcu_read_lock() call in update_sibling_cpumasks().  It is
because the update_cpumasks_hier() function may sleep. So we have
to release the RCU lock, call update_cpumasks_hier() and reacquire
it afterward.

Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks()
instead of stating that in the comment.

Fixes: 4716909c ("cpuset: Track cpusets that use parent's effective_cpus")
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

When building with 'make -s', there is some output from resolve_btfids:

$ make -sj"$(nproc)" oldconfig prepare
  MKDIR     .../tools/bpf/resolve_btfids/libbpf/
  MKDIR     .../tools/bpf/resolve_btfids//libsubcmd
  LINK     resolve_btfids

Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org

This reverts commit 54d516b1

That commit did a refactoring that effectively combined fast and slow
gup paths (again).  And that was again incorrect, for two reasons:

 a) Fast gup and slow gup get reference counts on pages in different
    ways and with different goals: see Linus' writeup in commit
    cd1adf1b ("Revert "mm/gup: remove try_get_page(), call
    try_get_compound_head() directly""), and

 b) try_grab_compound_head() also has a specific check for
    "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller
    can fall back to slow gup. This resulted in new failures, as
    recently report by Will McVicker [1].

But (a) has problems too, even though they may not have been reported
yet.  So just revert this.

Link: https://lore.kernel.org/r/20220131203504.3458775-1-willmcvicker@google.com [1]
Fixes: 54d516b1 ("mm/gup: small refactoring: simplify try_grab_page()")
Reported-and-tested-by: Will McVicker <willmcvicker@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Minchan Kim <minchan@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: stable@vger.kernel.org # 5.15
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix missed change for PTR->PTR_WD conversion

 - kernel-doc fixes

* tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: KVM: fix vz.c kernel-doc notation
  MIPS: octeon: Fix missed PTR->PTR_WD conversion

After commit 2fd3fb0be1d1 ("kasan, vmalloc: unpoison VM_ALLOC pages
after mapping"), non-VM_ALLOC mappings will be marked as accessible
in __get_vm_area_node() when KASAN is enabled. But now the flag for
ringbuf area is VM_ALLOC, so KASAN will complain out-of-bound access
after vmap() returns. Because the ringbuf area is created by mapping
allocated pages, so use VM_MAP instead.

After the change, info in /proc/vmallocinfo also changes from
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmalloc user
to
  [start]-[end]   24576 ringbuf_map_alloc+0x171/0x290 vmap user

Fixes: 457f4436 ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: syzbot+5ad567a418794b9b5983@syzkaller.appspotmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220202060158.6260-1-houtao1@huawei.com

syzkaller was able to trigger a deadlock for NTF_MANAGED entries [0]:

  kworker/0:16/14617 is trying to acquire lock:
  ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
  [...]
  but task is already holding lock:
  ffffffff8d4dd370 (&tbl->lock){++-.}-{2:2}, at: neigh_managed_work+0x35/0x250 net/core/neighbour.c:1572

The neighbor entry turned to NUD_FAILED state, where __neigh_event_send()
triggered an immediate probe as per commit cd28ca0a ("neigh: reduce
arp latency") via neigh_probe() given table lock was held.

One option to fix this situation is to defer the neigh_probe() back to
the neigh_timer_handler() similarly as pre cd28ca0a. For the case
of NTF_MANAGED, this deferral is acceptable given this only happens on
actual failure state and regular / expected state is NUD_VALID with the
entry already present.

The fix adds a parameter to __neigh_event_send() in order to communicate
whether immediate probe is allowed or disallowed. Existing call-sites
of neigh_event_send() default as-is to immediate probe. However, the
neigh_managed_work() disables it via use of neigh_event_send_probe().

[0] <TASK>
  __dump_stack lib/dump_stack.c:88 [inline]
  dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
  print_deadlock_bug kernel/locking/lockdep.c:2956 [inline]
  check_deadlock kernel/locking/lockdep.c:2999 [inline]
  validate_chain kernel/locking/lockdep.c:3788 [inline]
  __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5027
  lock_acquire kernel/locking/lockdep.c:5639 [inline]
  lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5604
  __raw_write_lock_bh include/linux/rwlock_api_smp.h:202 [inline]
  _raw_write_lock_bh+0x2f/0x40 kernel/locking/spinlock.c:334
  ___neigh_create+0x9e1/0x2990 net/core/neighbour.c:652
  ip6_finish_output2+0x1070/0x14f0 net/ipv6/ip6_output.c:123
  __ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
  __ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
  ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
  NF_HOOK_COND include/linux/netfilter.h:296 [inline]
  ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
  dst_output include/net/dst.h:451 [inline]
  NF_HOOK include/linux/netfilter.h:307 [inline]
  ndisc_send_skb+0xa99/0x17f0 net/ipv6/ndisc.c:508
  ndisc_send_ns+0x3a9/0x840 net/ipv6/ndisc.c:650
  ndisc_solicit+0x2cd/0x4f0 net/ipv6/ndisc.c:742
  neigh_probe+0xc2/0x110 net/core/neighbour.c:1040
  __neigh_event_send+0x37d/0x1570 net/core/neighbour.c:1201
  neigh_event_send include/net/neighbour.h:470 [inline]
  neigh_managed_work+0x162/0x250 net/core/neighbour.c:1574
  process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
  worker_thread+0x657/0x1110 kernel/workqueue.c:2454
  kthread+0x2e9/0x3a0 kernel/kthread.c:377
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
  </TASK>

Fixes: 7482e384 ("net, neigh: Add NTF_MANAGED flag for managed neighbor entries")
Reported-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@nvidia.com>
Tested-by: syzbot+5239d0e1778a500d477a@syzkaller.appspotmail.com
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220201193942.5055-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_shift_skb_data() might collapse three packets into a larger one.

P_A, P_B, P_C  -> P_ABC

Historically, it used a single tcp_skb_can_collapse_to(P_A) call,
because it was enough.

In commit 85712484 ("tcp: coalesce/collapse must respect MPTCP extensions"),
this call was replaced by a call to tcp_skb_can_collapse(P_A, P_B)

But the now needed test over P_C has been missed.

This probably broke MPTCP.

Then later, commit 9b65b17d ("net: avoid double accounting for pure zerocopy skbs")
added an extra condition to tcp_skb_can_collapse(), but the missing call
from tcp_shift_skb_data() is also breaking TCP zerocopy, because P_A and P_C
might have different skb_zcopy_pure() status.

Fixes: 85712484 ("tcp: coalesce/collapse must respect MPTCP extensions")
Fixes: 9b65b17d ("net: avoid double accounting for pure zerocopy skbs")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mat Martineau <mathew.j.martineau@linux.intel.com>
Cc: Talal Ahmad <talalahmad@google.com>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220201184640.756716-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nfsd fixes from Chuck Lever:
 "Notable bug fixes:

   - Ensure SM_NOTIFY doesn't crash the NFS server host

   - Ensure NLM locks are cleaned up after client reboot

   - Fix a leak of internal NFSv4 lease information"

* tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client.
  lockd: fix failure to cleanup client locks
  lockd: fix server crash on reboot of client holding lock

Pull fanotify fix from Jan Kara:
 "Fix stale file descriptor in copy_event_to_user"

* tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Fix stale file descriptor in copy_event_to_user()

Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fixes from Shuah Khan:
 "A single fix to an error seen on qemu due to a missing import"

* tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: Import missing importlib.abc

Pull pin control fixes from Linus Walleij:
 "Most interesting and urgent is the Intel stuff affecting Chromebooks
  and laptops.

   - Fix up group name building on the Intel Thunderbay

   - Fix interrupt problems on the Intel Cherryview

   - Fix some pin data on the Sunxi H616

   - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the
     merge window

   - Fix an unexpected interrupt problem on the Intel Sunrisepoint

   - Fix a glitch when updating IRQ flags on all Intel pin controllers

   - Revert a Zynqmp patch to unify the pin naming, let's find some
     better solution

   - Fix some error paths in the Broadcom BCM2835 driver

   - Fix a Kconfig problem pertaining to the BCM63XX drivers

   - Fix the regmap support in the Microchip SGPIO driver"

* tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: microchip-sgpio: Fix support for regmap
  pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP
  pinctrl: bcm2835: Fix a few error paths
  pinctrl: zynqmp: Revert "Unify pin naming"
  pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line
  pinctrl: intel: fix unexpected interrupt
  pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile
  pinctrl: sunxi: Fix H616 I2S3 pin data
  pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping
  pinctrl: thunderbay: rework loops looking for groups names
  pinctrl: thunderbay: comment process of building functions a bit

Do not try to use any SKB fields after the packet has been passed up in the
receive stack.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220202083039.3774851-1-steen.hegelund@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>