- 15 Jan, 2016 38 commits
-
-
Joonsoo Kim authored
This is preparation step to report test failed pfn in new tracepoint to analyze cma allocation failure problem. There is no functional change in this patch. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
David Rientjes <rientjes@google.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Zimmer authored
When running the SPECint_rate gcc on some very large boxes it was noticed that the system was spending lots of time in mpol_shared_policy_lookup(). The gamess benchmark can also show it and is what I mostly used to chase down the issue since the setup for that I found to be easier. To be clear the binaries were on tmpfs because of disk I/O requirements. We then used text replication to avoid icache misses and having all the copies banging on the memory where the instruction code resides. This results in us hitting a bottleneck in mpol_shared_policy_lookup() since lookup is serialised by the shared_policy lock. I have only reproduced this on very large (3k+ cores) boxes. The problem starts showing up at just a few hundred ranks getting worse until it threatens to livelock once it gets large enough. For example on the gamess benchmark at 128 ranks this area consumes only ~1% of time, at 512 ranks it consumes nearly 13%, and at 2k ranks it is over 90%. To alleviate the contention in this area I converted the spinlock to an rwlock. This allows a large number of lookups to happen simultaneously. The results were quite good reducing this consumtion at max ranks to around 2%. [akpm@linux-foundation.org: tidy up code comments] Signed-off-by:
Nathan Zimmer <nzimmer@sgi.com> Acked-by:
-
Chen Gang authored
__phys_to_pfn and __pfn_to_phys are symmetric, PHYS_PFN and PFN_PHYS are semmetric: - y = (phys_addr_t)x << PAGE_SHIFT - y >> PAGE_SHIFT = (phys_add_t)x - (unsigned long)(y >> PAGE_SHIFT) = x [akpm@linux-foundation.org: use macro arg name `x'] [arnd@arndb.de: include linux/pfn.h for PHYS_PFN definition] Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
yalin wang authored
Move trace_reclaim_flags() into trace function, so that we don't need caculate these flags if the trace is disabled. Signed-off-by:
yalin wang <yalin.wang2010@gmail.com> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Chen Gang authored
Simplify may_expand_vm(). [akpm@linux-foundation.org: further simplification, per Naoya Horiguchi] Signed-off-by:
-
Alexey Klimov authored
Before usage page pointer initialized by NULL is reinitialized by follow_page_mask(). Drop useless init of page pointer in the beginning of loop. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Acked-by:
-
Vladimir Davydov authored
Mark those kmem allocations that are known to be easily triggered from userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to memcg. For the list, see below: - threadinfo - task_struct - task_delay_info - pid - cred - mm_struct - vm_area_struct and vm_region (nommu) - anon_vma and anon_vma_chain - signal_struct - sighand_struct - fs_struct - files_struct - fdtable and fdtable->full_fds_bits - dentry and external_name - inode for all filesystems. This is the most tedious part, because most filesystems overwrite the alloc_inode method. The list is far from complete, so feel free to add more objects. Nevertheless, it should be close to "account everything" approach and keep most workloads within bounds. Malevolent users will be able to breach the limit, but this was possible even with the former "account everything" approach (simply because it did not account everything in fact). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Tejun Heo <tj@kernel.org> Cc: Greg Thelen <gthelen@google.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Vladimir Davydov authored
Make vmalloc family functions allocate vmalloc area pages with alloc_kmem_pages so that if __GFP_ACCOUNT is set they will be accounted to memcg. This is needed, at least, to account alloc_fdmem allocations. Signed-off-by:
-
Vladimir Davydov authored
Currently, if we want to account all objects of a particular kmem cache, we have to pass __GFP_ACCOUNT to each kmem_cache_alloc call, which is inconvenient. This patch introduces SLAB_ACCOUNT flag which if passed to kmem_cache_create will force accounting for every allocation from this cache even if __GFP_ACCOUNT is not passed. This patch does not make any of the existing caches use this flag - it will be done later in the series. Note, a cache with SLAB_ACCOUNT cannot be merged with a cache w/o SLAB_ACCOUNT, because merged caches share the same kmem_cache struct and hence cannot have different sets of SLAB_* flags. Thus using this flag will probably reduce the number of merged slabs even if kmem accounting is not used (only compiled in). Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
-
Vladimir Davydov authored
Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So this patch switches kmem accounting to the white-policy: now only those kmem allocations that are marked as __GFP_ACCOUNT are accounted to memcg. Currently, no kmem allocations are marked like this. The following patches will mark several kmem allocations that are known to be easily triggered from userspace and therefore should be accounted to memcg. Signed-off-by:
-
Vladimir Davydov authored
This reverts commit 8f4fc071 ("gfp: add __GFP_NOACCOUNT"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by:
-
Vladimir Davydov authored
Currently, all kmem allocations (namely every kmem_cache_alloc, kmalloc, alloc_kmem_pages call) are accounted to memory cgroup automatically. Callers have to explicitly opt out if they don't want/need accounting for some reason. Such a design decision leads to several problems: - kmalloc users are highly sensitive to failures, many of them implicitly rely on the fact that kmalloc never fails, while memcg makes failures quite plausible. - A lot of objects are shared among different containers by design. Accounting such objects to one of containers is just unfair. Moreover, it might lead to pinning a dead memcg along with its kmem caches, which aren't tiny, which might result in noticeable increase in memory consumption for no apparent reason in the long run. - There are tons of short-lived objects. Accounting them to memcg will only result in slight noise and won't change the overall picture, but we still have to pay accounting overhead. For more info, see - http://lkml.kernel.org/r/20151105144002.GB15111%40dhcp22.suse.cz - http://lkml.kernel.org/r/20151106090555.GK29259@esperanza Therefore this patchset switches to the white list policy. Now kmalloc users have to explicitly opt in by passing __GFP_ACCOUNT flag. Currently, the list of accounted objects is quite limited and only includes those allocations that (1) are known to be easily triggered from userspace and (2) can fail gracefully (for the full list see patch no. 6) and it still misses many object types. However, accounting only those objects should be a satisfactory approximation of the behavior we used to have for most sane workloads. This patch (of 6): Revert 499611ed ("kernfs: do not account ino_ida allocations to memcg"). Black-list kmem accounting policy (aka __GFP_NOACCOUNT) turned out to be fragile and difficult to maintain, because there seem to be many more allocations that should not be accounted than those that should be. Besides, false accounting an allocation might result in much worse consequences than not accounting at all, namely increased memory consumption due to pinned dead kmem caches. So it was decided to switch to the white-list policy. This patch reverts bits introducing the black-list policy. The white-list policy will be introduced later in the series. Signed-off-by:
-
Geliang Tang authored
Add a new helper function get_first_slab() that get the first slab from a kmem_cache_node. Signed-off-by:
Geliang Tang <geliangtang@163.com> Acked-by:
Christoph Lameter <cl@linux.com> Acked-by:
-
Geliang Tang authored
Simplify the code with list_for_each_entry(). Signed-off-by:
-
Geliang Tang authored
Simplify the code with list_first_entry_or_null(). Signed-off-by:
-
Andrew Morton authored
A little cleanup - the invocation site provdes the semicolon. Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
-
Joseph Qi authored
lksb flags are defined both in dlmapi.h and dlmcommon.h. So clean them up from dlmcommon.h. Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Junxiao Bi authored
Found this when do patch review, remove to make it clear and save a little cpu time. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Joseph Qi authored
In ocfs2_orphan_del, currently it finds and deletes entry first, and then access orphan dir dinode. This will have a problem once ocfs2_journal_access_di fails. In this case, entry will be removed from orphan dir, but in deed the inode hasn't been deleted successfully. In other words, the file is missing but not actually deleted. So we should access orphan dinode first like unlink and rename. Signed-off-by:
-
xuejiufei authored
When two processes are migrating the same lockres, dlm_add_migration_mle() return -EEXIST, but insert a new mle in hash list. dlm_migrate_lockres() will detach the old mle and free the new one which is already in hash list, that will destroy the list. Signed-off-by:
-
xuejiufei authored
We have found that migration source will trigger a BUG that the refcount of mle is already zero before put when the target is down during migration. The situation is as follows: dlm_migrate_lockres dlm_add_migration_mle dlm_mark_lockres_migrating dlm_get_mle_inuse <<<<<< Now the refcount of the mle is 2. dlm_send_one_lockres and wait for the target to become the new master. <<<<<< o2hb detect the target down and clean the migration mle. Now the refcount is 1. dlm_migrate_lockres woken, and put the mle twice when found the target goes down which trigger the BUG with the following message: "ERROR: bad mle: ". Signed-off-by:
-
Goldwyn Rodrigues authored
DLM does not cache locks. So, blocking lock and unlock will only make the performance worse where contention over the locks is high. Signed-off-by:
Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by:
-
jiangyiwen authored
The following case will lead to slot overwritten. N1 N2 mount ocfs2 volume, find and allocate slot 0, then set osb->slot_num to 0, begin to write slot info to disk mount ocfs2 volume, wait for super lock write block fail because of storage link down, unlock super lock got super lock and also allocate slot 0 then unlock super lock mount fail and then dismount, since osb->slot_num is 0, try to put invalid slot to disk. And it will succeed if storage link restores. N2 slot info is now overwritten Once another node say N3 mount, it will find and allocate slot 0 again, which will lead to mount hung because journal has already been locked by N2. so when write slot info failed, invalidate slot in advance to avoid overwrite slot. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:Yiwen Jiang <jiangyiwen@huawei.com> Reviewed-by:
-
Xue jiufei authored
dlm_grab() may return NULL when the node is doing unmount. When doing code review, we found that some dlm handlers may return error to caller when dlm_grab() returns NULL and make caller BUG or other problems. Here is an example: Node 1 Node 2 receives migration message from node 3, and send migrate request to others start unmounting receives migrate request from node 1 and call dlm_migrate_request_handler() unmount thread unregisters domain handlers and removes dlm_context from dlm_domains dlm_migrate_request_handlers() returns -EINVAL to node 1 Exit migration neither clearing the migration state nor sending assert master message to node 3 which cause node 3 hung. Signed-off-by: -
Joseph Qi authored
Since iput will take care the NULL check itself, NULL check before calling it is redundant. So clean them up. Signed-off-by:
-
jiangyiwen authored
Commit f3f85464 ("ocfs2_dlm: Ensure correct ordering of set/clear refmap bit on lockres") still exists a race which can't ensure the ordering is exactly correct. Node1 Node2 Node3 umount, migrate lockres to Node2 migrate finished, send migrate request to Node3 received migrate request, create a migration_mle, respond to Node2. set DLM_LOCK_RES_SETREF_INPROG and send assert master to Node3 delete migration_mle in assert_master_handler, Node3 umount without response dlm_thread purge this lockres, send drop deref message to Node2 found the flag of DLM_LOCK_RES_SETREF_INPROG is set, dispatch dlm_deref_lockres_worker to clear refmap, but in function of dlm_deref_lockres_worker, only if node in refmap it wait DLM_LOCK_RES_SETREF_INPROG to be cleared. So worker is done successfully purge lockres, send assert master response to Node1, and finish umount set Node3 in refmap, and it won't be cleared forever, thus lead to umount hung so wait until DLM_LOCK_RES_SETREF_INPROG is cleared in dlm_deref_lockres_worker. Signed-off-by:
-
Julia Lawall authored
The ocfs2_extent_tree_operations structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Xue jiufei authored
We found a race between purge and migration when doing code review. Node A put lockres to purgelist before receiving the migrate message from node B which is the master. Node A call dlm_mig_lockres_handler to handle this message. dlm_mig_lockres_handler dlm_lookup_lockres >>>>>> race window, dlm_run_purge_list may run and send deref message to master, waiting the response spin_lock(&res->spinlock); res->state |= DLM_LOCK_RES_MIGRATING; spin_unlock(&res->spinlock); dlm_mig_lockres_handler returns >>>>>> dlm_thread receives the response from master for the deref message and triggers the BUG because the lockres has the state DLM_LOCK_RES_MIGRATING with the following message: dlm_purge_lockres:209 ERROR: 6633EB681FA7474A9C280A4E1A836F0F: res M0000000000000000030c0300000000 in use after deref Signed-off-by: -
Junxiao Bi authored
When run multiple xattr test of ocfs2-test on a three-nodes cluster, mount failed sometimes with the following message. o2hb: Unable to stabilize heartbeart on region D18B775E758D4D80837E8CF3D086AD4A (xvdb) Stabilize heartbeat depends on the timing order to mount ocfs2 from cluster nodes and how fast the tcp connections are established. So increase unsteady interations to leave more time for it. Signed-off-by:
-
John Haxby authored
Some versions of tar assume that files with st_blocks == 0 do not contain any data and will skip reading them entirely. See also commit 9206c561 ("ext4: return non-zero st_blocks for inline data"). Signed-off-by:
John Haxby <john.haxby@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Gang He <ghe@suse.com> Reviewed-by:
-
Norton.Zhu authored
In ocfs2_parse_options, a) it's better to declare variables(small size) outside of while loop; b) 'option' will be set by match_int, 'option = 0;' makes no sense, if match_int failed, it just goto bail and return. Signed-off-by:
Norton.Zhu <norton.zhu@huawei.com> Reviewed-by:
Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Arnd Bergmann authored
Fix build errors that happen when CONFIG_LOGFS=y and CONFIG_MTD=m: fs/built-in.o: In function `logfs_mount': super.c:(.text+0x92a6f): undefined reference to `logfs_get_sb_mtd' fs/built-in.o: In function `logfs_get_sb_bdev': (.text+0x93530): undefined reference to `logfs_get_sb_mtd' This patch avoids the error by changing the dependencies of logfs in a way that we can no longer configure logfs as built-in when the MTD core is a loadable module, while leaving the dependency to require at least one of MTD or BLOCK to be enabled. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Peter Chen <peter.chen@freescale.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
Commit ac551828 ("modpost: i2c aliases need no trailing wildcard") removed the wildcard at the end of the I2C module aliases because I2C devices have no IDs so the aliases are just arbitrary device names. This is also true for OF modaliases since a compatible string is used to define a specific IP hardware block. So the modalias should match a specific compatible string and not attempt to match a compatible string whose name matches the beginning of another one. For example, the following driver module: $ modinfo cros_ec_keyb | grep alias alias: platform:cros-ec-keyb alias: of:N*T*Cgoogle,cros-ec-keyb* will be tried to be loaded for an alias of:N*T*Cgoogle,cros-ec-keyb-v2 but there could be a different driver that supports the device for that compatible string so it's better to remove the trailing wildcard for OF. Also, remove the word "always" from the add_wildcard() function comment since that was carried from the time where a wildcard was always added at the end of the module alias for all the devices. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Suggested-by:
Brian Norris <computersforpeace@gmail.com> Reviewed-by:
Sjoerd Simons <sjoerd.simons@collabora.co.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jeff Layton authored
At the time that this code was originally written, call_srcu didn't exist, so this thread was required to ensure that we waited for that SRCU grace period to settle before finally freeing the object. It does exist now however and we can much more efficiently use call_srcu to handle this. That also allows us to potentially use srcu_barrier to ensure that they are all of the callbacks have run before proceeding. In order to conserve space, we union the rcu_head with the g_list. This will be necessary for nfsd which will allocate marks from a dedicated slabcache. We have to be able to ensure that all of the objects are destroyed before destroying the cache. That's fairly Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Cc: Eric Paris <eparis@parisplace.org> Reviewed-by:
Jan Kara <jack@suse.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Geliang Tang authored
To make the intention clearer, use list_next_entry instead of list_entry. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Sergey Senozhatsky authored
In Python3+ print is a function so the old syntax is not correct anymore: $ ./scripts/bloat-o-meter vmlinux.o vmlinux.o.old File "./scripts/bloat-o-meter", line 61 print "add/remove: %s/%s grow/shrink: %s/%s up/down: %s/%s (%s)" % \ ^ SyntaxError: invalid syntax Fix by calling print as a function. Tested on python 2.7.11, 3.5.1 Signed-off-by:Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Laura Abbott authored
In include/asm-generic/sections.h: /* * Usage guidelines: * _text, _data: architecture specific, don't use them in * arch-independent code * [_stext, _etext]: contains .text.* sections, may also contain * .rodata.* * and/or .init.* sections _text is not guaranteed across architectures. Architectures such as ARM may reuse parts which are not actually text and erroneously trigger a bug. Switch to using _stext which is guaranteed to contain text sections. Came out of https://lkml.kernel.org/g/<567B1176.4000106@redhat.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sudip Mukherjee authored
The build of m32104ut_defconfig for m32r arch was failing for long long time with the error: ERROR: "memory_start" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [fs/udf/udf.ko] undefined! ERROR: "memory_end" [drivers/scsi/sg.ko] undefined! ERROR: "memory_start" [drivers/scsi/sg.ko] undefined! ERROR: "memory_end" [drivers/i2c/i2c-dev.ko] undefined! ERROR: "memory_start" [drivers/i2c/i2c-dev.ko] undefined! As done in other architectures export the symbols to fix the error. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 14 Jan, 2016 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs updates from Dave Chinner: "There's not a lot in this - the main addition is the CRC validation of the entire region of the log that the will be recovered, along with several log recovery fixes. Most of the rest is small bug fixes and cleanups. I have three bug fixes still pending, all that address recently fixed regressions that I will send to next week after they've had some time in for-next. Summary: - extensive CRC validation during log recovery - several log recovery bug fixes - Various DAX support fixes - AGFL size calculation fix - various cleanups in preparation for new functionality - project quota ENOSPC notification via netlink - tracing and debug improvements" * tag 'xfs-for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (26 commits) xfs: handle dquot buffer readahead in log recovery correctly xfs: inode recovery readahead can race with inode buffer creation xfs: eliminate committed arg from xfs_bmap_finish xfs: bmapbt checking on debug kernels too expensive xfs: add tracepoints to readpage calls xfs: debug mode log record crc error injection xfs: detect and trim torn writes during log recovery xfs: fix recursive splice read locking with DAX xfs: Don't use reserved blocks for data blocks with DAX XFS: Use a signed return type for suffix_kstrtoint() libxfs: refactor short btree block verification libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct libxfs: use a convenience variable instead of open-coding the fork xfs: fix log ticket type printing libxfs: make xfs_alloc_fix_freelist non-static xfs: make xfs_buf_ioend_async() static xfs: send warning of project quota to userspace via netlink xfs: get mp from bma->ip in xfs_bmap code xfs: print name of verifier if it fails libxfs: Optimize the loop for xfs_bitmap_empty ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fsLinus Torvalds authored
Pull f2fs updates from Jaegeuk Kim: "This series adds two ioctls to control cached data and fragmented files. Most of the rest fixes missing error cases and bugs that we have not covered so far. Summary: Enhancements: - support an ioctl to execute online file defragmentation - support an ioctl to flush cached data - speed up shrinking of extent_cache entries - handle broken superblock - refector dirty inode management infra - revisit f2fs_map_blocks to handle more cases - reduce global lock coverage - add detecting user's idle time Major bug fixes: - fix data race condition on cached nat entries - fix error cases of volatile and atomic writes" * tag 'for-f2fs-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (87 commits) f2fs: should unset atomic flag after successful commit f2fs: fix wrong memory condition check f2fs: monitor the number of background checkpoint f2fs: detect idle time depending on user behavior f2fs: introduce time and interval facility f2fs: skip releasing nodes in chindless extent tree f2fs: use atomic type for node count in extent tree f2fs: recognize encrypted data in f2fs_fiemap f2fs: clean up f2fs_balance_fs f2fs: remove redundant calls f2fs: avoid unnecessary f2fs_balance_fs calls f2fs: check the page status filled from disk f2fs: introduce __get_node_page to reuse common code f2fs: check node id earily when readaheading node page f2fs: read isize while holding i_mutex in fiemap Revert "f2fs: check the node block address of newly allocated nid" f2fs: cover more area with nat_tree_lock f2fs: introduce max_file_blocks in sbi f2fs crypto: check CONFIG_F2FS_FS_XATTR for encrypted symlink f2fs: introduce zombie list for fast shrinking extent trees ...
-
