- 02 Jun, 2017 25 commits
-
-
Takashi Iwai authored
The snd_pcm_oss_writev3() and snd_pcm_oss_readv3() are used only in io.c with CONFIG_SND_PCM_OSS_PLUGINS=y. Add an ifdef to reduce the build of these functions. Along with it, since they are called always for in-kernel copy, reduce the argument and call snd_pcm_kernel_writev() and *_readv() directly instead. Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This is the last-standing one: kill the set_fs() usage in PCM OSS layer by replacing with the new API functions to deal with the direct in-kernel buffer copying. The code to fill the silence can be replaced even to a one-liner to pass NULL buffer instead of the manual copying. Reviewed-by:
-
Takashi Iwai authored
With the new API to perform the in-kernel buffer copy, we can get rid of set_fs() usage in this driver, finally. Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Takashi Iwai authored
Now all materials are ready, let's allow the direct in-kernel read/write, i.e. a kernel-space buffer is passed for read or write, instead of the normal user-space buffer. This feature is used by OSS layer and UAC1 driver, for example. The __snd_pcm_lib_xfer() takes in_kernel argument that indicates the in-kernel buffer copy. When this flag is set, another transfer code is used. It's either via copy_kernel PCM ops or the normal memcpy(), depending on the driver setup. As external API, snd_pcm_kernel_read(), *_write() and other variants are provided. That's all. This support is really simple because of the code refactoring until now. Reviewed-by:
-
Takashi Iwai authored
Use the existing silence helper codes for simplification. Reviewed-by:
-
Takashi Iwai authored
Both __snd_pcm_lib_read() and __snd_pcm_write() functions have almost the same code to loop over samples. For simplification, this patch unifies both as the single helper, __snd_pcm_lib_xfer(). Other than that, there should be no functional change by this patch. Reviewed-by:
-
Takashi Iwai authored
This patch proceeds more abstraction of PCM read/write loop codes. For both interleaved and non-interleaved transfers, the same copy or silence transfer code (which is defined as pcm_transfer_f) is used now. This became possible since we switched to byte size to copy_* and fill_silence ops argument instead of frames. And, for both read and write, we can use the same copy function (which is defined as pcm_copy_f), just depending on whether interleaved or non-interleaved mode. The transfer function is determined at the beginning of the loop, depending on whether the driver gives the specific copy ops or it's the standard read/write. Another bonus by this change is that we now guarantee the silencing behavior when NULL buffer is passed to write helpers. It'll simplify some codes later. Reviewed-by:
-
Takashi Iwai authored
Make snd_pcm_lib_read() and *_write() static inline functions that call the common helper functions directly. This reduces a slight amount of codes, and at the same time, it's a preparation for the further cleanups / fixes. Reviewed-by:
-
Takashi Iwai authored
Just shuffle the codes, without any change otherwise. Reviewed-by:
-
Takashi Iwai authored
Reviewed-by:
-
Takashi Iwai authored
Now that all users of old copy and silence ops have been converted to the new PCM ops, the old stuff can be retired and go away. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. The device supports only 1 channel and 8bit sample, so it's always bytes=frames, and we need no conversion of unit in the callback. Also, it's a capture stream, thus no silence is needed. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. In AC97 and I2S-TDM mode, we need to convert back to frames, but otherwise the conversion is pretty straightforward. Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. Fixed also the user-space buffer copy with the proper copy_from_user*() variant. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. For avoiding the code redundancy, slightly hackish macros are introduced. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. For simplifying the code a bit, two local helpers are introduced here: get_bpos() and playback_copy_ack(). Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. The conversion is straightforward with standard helper functions. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. The conversion is straightforward with standard helper functions. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. The conversion is straightforward with standard helper functions, and now we can drop the bytes <-> frames conversions in callbacks. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new ops. The conversion is straightforward with standard helper functions, and now we can drop the bytes <-> frames conversions in callbacks. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new PCM ops. Although we can refactor this messy code, at this time, the changes are kept as small as possible. Let's clean up later. Reviewed-by:
-
Takashi Iwai authored
Replace the copy and the silence ops with the new ops. The conversion is straightforward with standard helper functions, and now we can drop the bytes <-> frames conversions in callbacks. Reviewed-by:
-
Takashi Iwai authored
Replace the copy ops with the new copy_user and copy_kernel ops. It's used only for a capture stream (for some hardware workaround), thus we need no silence operation. Reviewed-by:
-
Takashi Iwai authored
It's a dummy ops, so just replacing it. Reviewed-by:
-
Takashi Iwai authored
For supporting the explicit in-kernel copy of PCM buffer data, and also for further code refactoring, three new PCM ops, copy_user, copy_kernel and fill_silence, are introduced. The old copy and silence ops will be deprecated and removed later once when all callers are converted. The copy_kernel ops is the new one, and it's supposed to transfer the PCM data from the given kernel buffer to the hardware ring-buffer (or vice-versa depending on the stream direction), while the copy_user ops is equivalent with the former copy ops, to transfer the data from the user-space buffer. The major difference of the new copy_* and fill_silence ops from the previous ops is that the new ops take bytes instead of frames for size and position arguments. It has two merits: first, it allows the callback implementation often simpler (just call directly memcpy() & co), and second, it may unify the implementations of both interleaved and non-interleaved cases, as we'll see in the later patch. As of this stage, copy_kernel ops isn't referred yet, but only copy_user is used. Reviewed-by:
-
- 30 May, 2017 2 commits
-
-
Colin Ian King authored
We need to include pcm_local.h to clean up some smatch warnings: symbol 'snd_pcm_timer_done' was not declared. Should it be static? symbol 'snd_pcm_timer_init' was not declared. Should it be static? symbol 'snd_pcm_timer_resolution_change' was not declared. Should it be static? Also remove some extraneous tabs on empty lines and replace space intentation with a tab. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Bhumika Goyal authored
Declare snd_kcontrol_new structures as const as they are only passed an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Cross compiled these files: sound/aoa/codecs/tas.c - powerpc sound/mips/{hal2.c/sgio2audio.c} - mips sound/ppc/{awacs.c/beep.c/tumbler.c} - powerpc sound/soc/sh/siu_dai.c - sh Could not find an architecture to compile sound/sh/aica.c. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Acked-by:
-
- 26 May, 2017 1 commit
-
-
Takashi Sakamoto authored
Several files are used to construct PCM core module, a.k.a snd-pcm. Although available APIs are described in 'include/sound/pcm.h', some of them are not exported as symbols in kernel space. Such APIs are just for module local usage. This commit adds module local header file and move some function prototypes into it so that scopes of them are controlled properly and developers get no confusion from unavailable symbols. Signed-off-by:
-
- 25 May, 2017 7 commits
-
-
Takashi Iwai authored
Although the ack callback is supposed to be called at each appl_ptr or hw_ptr update, we missed a few opportunities: namely, forward, rewind and sync_ptr. Formerly calling ack at rewind may have leaded to unexpected results due to the forgotten negative appl_ptr update in indirect-PCM helper, which is the major user of the PCM ack callback. But now we fixed this oversights, thus we can call ack callback safely even at rewind callback -- of course with the proper handling of the error from the callback. This patch adds the calls of ack callback in the places mentioned in the above. Signed-off-by: -
Takashi Iwai authored
Now that the indirect-PCM transfer helper gives back an error, we should return the error from ack callbacks. Acked-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Takashi Iwai authored
Now that the indirect-PCM transfer helper gives back an error, we should return the error from ack callbacks. Signed-off-by: -
Takashi Iwai authored
Now that the indirect-PCM transfer helper gives back an error, we should return the error from ack callbacks. Signed-off-by: -
Takashi Iwai authored
Now that the indirect-PCM transfer helper gives back an error, we should return the error from ack callbacks. Signed-off-by: -
Takashi Iwai authored
Now that the indirect-PCM transfer helper gives back an error, we should return the error from ack callbacks. Signed-off-by: -
Takashi Iwai authored
The indirect-PCM helper codes have an implicit assumption that the appl_ptr always increases. But the PCM core may deal with the decrement of appl_ptr via rewind ioctls, and it may screw up the buffer pointer management. This patch adds the negative appl_ptr diff in transfer functions and let returning an error instead of always accepting the appl_ptr updates. The callers are usually PCM ack callbacks, and they pass the error to the upper layer accordingly. Signed-off-by:
-
- 24 May, 2017 3 commits
-
-
Takashi Sakamoto authored
In design of ALSA pcm core, 'struct snd_pcm_ops.copy' is expected to copy PCM frames, according to frame alignment on intermediate buffer for userspace and dedicated buffer for data transmission. In this callback, value of 'channel' argument depends on the frame alignment, which drivers registers to runtime of PCM substream. When target devices can handle non-interleaved buffer, this value has positive value, otherwise negative. ALSA driver for PCM component of EMU8000 chip is programmed with local macro to switch the frame alignment. The 'copy' operation in non-interleaved side has evaluation of the 'channel' argument (actually it's 'voice' argument). This is useless. This commit remove the evaluation. [tiwai: the negative channel argument was the inheritance from the old code where -1 was meant for interleaved mode. The mix-up was dropped meanwhile, thus it's correct to assume that we receive no longer -1 there, and it's safe to cleanup the relevant code. Also, voice=0 for channel==1 is trivial, and it can be dropped, too.] Signed-off-by:
-
Takashi Sakamoto authored
ALSA driver series for devices of Gravis Ultra Sound includes local variable 'snd_gf1_pcm_use_dma'. Although this is a flag to change behaviours of local implementations for 'struct snd_pcm_ops.copy' and 'struct snd_pcm_ops.silence', it's invariable during module lifetime. This commit removes this local variable and the relevant operations. Signed-off-by:
-
Takashi Sakamoto authored
In current implementation of ALSA control core, list operation has a limitation to handle 16384 entries at once. This seems due to allocation in kernel space to copy data from user space. With a commit 53e7bf45 ("ALSA: control: Simplify snd_ctl_elem_list() implementation"), for the operation, ALSA control core copies data into user space directly. No need to care of kernel spaces anymore. This commit purges the limitation. Signed-off-by:
-
- 23 May, 2017 2 commits
-
-
Takashi Iwai authored
We used to use kmalloc (more exactly, krealloc()) for creating and growing the temporary buffer for text proc write. It can grow up to 16kB, and it's already a bit doubtful whether it's always safe to use kmalloc(). With the recent addition of kvmalloc(), we can have a better chance for succeed of memory allocation, so let's switch to that new API. Signed-off-by: -
Takashi Iwai authored
PCM core code has a few usages of set_fs(), mostly for two codepaths: - The DELAY ioctl call from pcm_compat.c - The ioctl wrapper in kernel context for PCM OSS and other This patch removes the set_fs() usage in these places by a slight code refactoring. For the former point, snd_pcm_delay() is changed to return the value directly instead of putting the value to the given address. Each caller stores the result in an appropriate manner. For fixing the latter, snd_pcm_lib_kernel_ioctl() is changed to call the functions directly as well. For achieving it, now the function accepts only the limited set of ioctls that have been used, so far. The primary user of this function is the PCM OSS layer, and the only other user is USB UAC1 gadget driver. Both drivers don't need the full set of ioctls. Reviewed-by:
-
