Switch devm_reset_control_array_get() to
devm_reset_control_array_get_exclusive().
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/202303241108553006227@zte.com.cn

Add a new compatible for the thermal sensor device on RK3588 SoCs.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-8-sebastian.reichel@collabora.com

The RK3588 SoC has seven temperature sensor ADC channels:

- Chip Center
- CPU Cluster 1 (Dual A76 "Big" Cores)
- CPU Cluster 2 (Dual A76 "Big" Cores)
- CPU Cluster 0 (Quad A55 "Little" Cores)
- Power Domain Center
- Graphics Processing Unit
- Neural Processing Unit
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[rebase, squash fixes]
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-7-sebastian.reichel@collabora.com

Dynamically allocate the sensors array based on the amount
of platform sensors in preparation for rk3588 support, which
needs 7 sensors.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-6-sebastian.reichel@collabora.com

Replace the channel ID lookup table by a simple offset, since
the channel IDs are consecutive.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230308112253.15659-5-sebastian.reichel@collabora.com

Use dev_err_probe to simplify error printing in the driver's probe
routine.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-4-sebastian.reichel@collabora.com

By using devm_clk_get_enabled() the clock acquisition and
enabling can be done in one step with automatic error
handling.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-3-sebastian.reichel@collabora.com

It's possible to directly get the match data in a generic
way nowadays.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230308112253.15659-2-sebastian.reichel@collabora.com

Pull thermal control material for 6.4-rc1 from Daniel Lezcano:

"- Add more thermal zone device encapsulation: prevent setting
   structure field directly, access the sensor device instead the
   thermal zone's device for trace, relocate the traces in
   drivers/thermal (Daniel Lezcano)

 - Use the generic trip point for the i.MX and remove the get_trip_temp
   ops (Daniel Lezcano)

 - Use the devm_platform_ioremap_resource() in the Hisilicon driver
   (Yang Li)

 - Remove R-Car H3 ES1.* handling as public has only access to the ES2
   version and the upstream support for the ES1 has been shutdown (Wolfram
   Sang)

 - Add a delay after initializing the bank in order to let the time to
   the hardware to initialze itself before reading the temperature
   (Amjad Ouled-Ameur)

 - Add MT8365 support (Amjad Ouled-Ameur)"

* tag 'thermal-v6.4-rc1-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
  thermal/drivers/ti: Use fixed update interval
  thermal/drivers/stm: Don't set no_hwmon to false
  thermal/drivers/db8500: Use driver dev instead of tz->device
  thermal/core: Relocate the traces definition in thermal directory
  thermal/drivers/hisi: Use devm_platform_ioremap_resource()
  thermal/drivers/imx: Use the thermal framework for the trip point
  thermal/drivers/imx: Remove get_trip_temp ops
  thermal/drivers/rcar_gen3_thermal: Remove R-Car H3 ES1.* handling
  thermal/drivers/mediatek: Add delay after thermal banks initialization
  thermal/drivers/mediatek: Add support for MT8365 SoC
  thermal/drivers/mediatek: Control buffer enablement tweaks
  dt-bindings: thermal: mediatek: Add binding documentation for MT8365 SoC

Once thermal_list_lock has been acquired in
__thermal_cooling_device_register(), it is not necessary to drop it
and take it again until all of the thermal zones have been updated,
so change the code accordingly.

No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently the TI thermal driver sets the sensor update interval based
on the polling of the thermal zone. In order to get the polling rate,
the code inspects the thermal zone device structure internals, thus
breaking the self-encapsulation of the thermal framework core
framework.

On the other side, we see the common polling rates set in the device
tree for the platforms using this driver are 500 or 1000 ms.

Setting the polling rate to 250 ms would be far enough to cover the
combination we found in the device tree.

Instead of accessing the thermal zone device structure polling rate,
let's use a common update interval of 250 ms for the driver.

Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20230307133735.90772-7-daniel.lezcano@linaro.org

The thermal->tzp->no_hwmon parameter is only used when calling
thermal_zone_device_register().

Setting it to 'false' before calling thermal_add_hwmon_sysfs() has no
effect.

Remove the call and again prevent the drivers to access the thermal
internals.

Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230307133735.90772-6-daniel.lezcano@linaro.org

The db8500 driver uses the thermal zone device instead of the device
attached to it. In order to prevent the drivers to access the thermal
zone device structure, replace the thermal zone device by the driver
to show the debug message.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230307133735.90772-5-daniel.lezcano@linaro.org

The traces are exported but only local to the thermal core code. On
the other side, the traces take the thermal zone device structure as
argument, thus they have to rely on the exported thermal.h header
file. As we want to move the structure to the private thermal core
header, first we have to relocate those traces to the same place as
many drivers do.

Cc: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230307133735.90772-2-daniel.lezcano@linaro.org

According to commit 7945f929 ("drivers: provide
devm_platform_ioremap_resource()"), convert platform_get_resource(),
devm_ioremap_resource() to a single call to Use
devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230308062719.79522-1-yang.lee@linux.alibaba.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The thermal framework provides an API to get the trip related to a
trip point id. We want to consolidate the generic trip points code,
thus preventing the different drivers to deal with the trip points
after they registered them.

The set_trip_temp ops will be changed regarding the above changes but
first we need to rework a bit the different implementation in the
drivers.

The goal is to prevent using the trip id but use a trip point passed
as parameter which will contain all the needed information.

As we don't have the trip point passed as parameter yet, we get the
trip point using the generic trip thermal framewrok APIs and use it to
take exactly the same decisions.

The difference with this change and the previous code is from where we
get the thermal trip point (which is the same).

No functional change intended.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230309092821.1590586-2-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

The i.MX thermal sensor uses the generic trip points. The thermal
framework can return the critical temperature directly.

Remove the pointless get_trip_temp ops.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230309092821.1590586-1-daniel.lezcano@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20230307163041.3815-7-wsa+renesas@sang-engineering.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Thermal sensor reads performed immediately after thermal bank
initialization returns bogus values. This is currently tackled by returning
0 if the temperature is bogus (exceeding 200000).

Instead, add a delay between the bank init and the thermal zone device
register to properly fix this.
Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-5-55a1ae14af74@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Merge Intel thermal driver fixes for 6.3-rc5:

 - Fix handling of two recently added module parameters in the Intel
   powerclamp thermal driver (David Arcari).

 - Fix one more deadlock in the int340x thermal driver (Srinivas
   Pandruvada).

* thermal-intel-fixes:
  thermal: intel: powerclamp: Fix cpumask and max_idle module parameters
  thermal: intel: int340x: processor_thermal: Fix additional deadlock

When cpumask is specified as a module parameter the value is
overwritten by the module init routine.  This can easily be fixed
by checking to see if the mask has already been allocated in the
init routine.

When max_idle is specified as a module parameter a panic will occur.
The problem is that the idle_injection_cpu_mask is not allocated until
the module init routine executes. This can easily be fixed by allocating
the cpumask if it's not already allocated.

Fixes: ebf51971 ("thermal: intel: powerclamp: Add two module parameters")
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties. As
part of this, convert of_get_property/of_find_property calls to the
recently added of_property_present() helper when we just want to test
for presence of a property and nothing more.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

For the sake of consistency, revert the second part of the
thermal_hwmon.c hunk from commit dec07d39 ("thermal: Don't use
'device' internal thermal zone structure field") after the first
part of it has been reverted.

Link: https://lore.kernel.org/linux-pm/5b084360-898b-aad0-0b8e-33acc585d71d@linaro.orgSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Commit 52f04f10 ("thermal: intel: int340x: processor_thermal: Fix
deadlock") addressed deadlock issue during user space trip update. But it
missed a case when thermal zone device is disabled when user writes 0.

Call to thermal_zone_device_disable() also causes deadlock as it also
tries to lock tz->lock, which is already claimed by trip_point_temp_store()
in the thermal core code.

Remove call to thermal_zone_device_disable() in the function
sys_set_trip_temp(), which is called from trip_point_temp_store().

Fixes: 52f04f10 ("thermal: intel: int340x: processor_thermal: Fix deadlock")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 6.2+ <stable@vger.kernel.org> # 6.2+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When the hwmon device node of a thermal zone device is not found,
using hwmon->device causes a kernel NULL pointer dereference.

Fixes: dec07d39 ("thermal: Don't use 'device' internal thermal zone structure field")
Reported-by: Preble Adam C <adam.c.preble@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The lockdep_assert_held() calls added to cooling_device_stats_setup()
and cooling_device_stats_destroy() by commit 790930f4 ("thermal:
core: Introduce thermal_cooling_device_update()") trigger false-positive
lockdep reports in code paths that are not subject to race conditions
(before cooling device registration and after cooling device removal).

For this reason, remove the lockdep_assert_held() calls from both
cooling_device_stats_setup() and cooling_device_stats_destroy() and
add one to thermal_cooling_device_stats_reinit() that has to be called
under the cdev lock.

Fixes: 790930f4 ("thermal: core: Introduce thermal_cooling_device_update()")
Link: https://lore.kernel.org/linux-acpi/ZCIDTLFt27Ei7+V6@ideak-desk.fi.intel.comReported-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge an x86_pkg_temp_thermal Intel thermal driver fix (Zhang Rui).

* thermal-intel:
  thermal: intel: x86_pkg_temp_thermal: Add lower bound check for sysfs input

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are a small set of USB and Thunderbolt driver fixes for reported
  problems and a documentation update, for 6.3-rc4.

  Included in here are:

   - documentation update for uvc gadget driver

   - small thunderbolt driver fixes

   - cdns3 driver fixes

   - dwc3 driver fixes

   - dwc2 driver fixes

   - chipidea driver fixes

   - typec driver fixes

   - onboard_usb_hub device id updates

   - quirk updates

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (30 commits)
  usb: dwc2: fix a race, don't power off/on phy for dual-role mode
  usb: dwc2: fix a devres leak in hw_enable upon suspend resume
  usb: chipidea: core: fix possible concurrent when switch role
  usb: chipdea: core: fix return -EINVAL if request role is the same with current role
  thunderbolt: Rename shadowed variables bit to interrupt_bit and auto_clear_bit
  thunderbolt: Disable interrupt auto clear for rings
  thunderbolt: Use const qualifier for `ring_interrupt_index`
  usb: gadget: Use correct endianness of the wLength field for WebUSB
  uas: Add US_FL_NO_REPORT_OPCODES for JMicron JMS583Gen 2
  usb: cdnsp: changes PCI Device ID to fix conflict with CNDS3 driver
  usb: cdns3: Fix issue with using incorrect PCI device function
  usb: cdnsp: Fixes issue with redundant Status Stage
  MAINTAINERS: make me a reviewer of USB/IP
  thunderbolt: Use scale field when allocating USB3 bandwidth
  thunderbolt: Limit USB3 bandwidth of certain Intel USB4 host routers
  thunderbolt: Call tb_check_quirks() after initializing adapters
  thunderbolt: Add missing UNSET_INBOUND_SBTX for retimer access
  thunderbolt: Fix memory leak in margining
  usb: dwc2: drd: fix inconsistent mode if role-switch-default-mode="host"
  docs: usb: Add documentation for the UVC Gadget
  ...

Pull scheduler fix from Borislav Petkov:

 - Fix a corner case where vruntime of a task is not being sanitized

* tag 'sched_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Sanitize vruntime of entity being migrated

Pull perf fix from Borislav Petkov:

 - Properly clear perf event status tracking in the AMD perf event
   overflow handler

* tag 'perf_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/core: Always clear status for idx

Pull core fixes from Borislav Petkov:

 - Do the delayed RCU wakeup for kthreads in the proper order so that
   former doesn't get ignored

 - A noinstr warning fix

* tag 'core_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  entry/rcu: Check TIF_RESCHED _after_ delayed RCU wake-up
  entry: Fix noinstr warning in __enter_from_user_mode()

Pull x86 fixes from Borislav Petkov:

 - Add a AMX ptrace self test

 - Prevent a false-positive warning when retrieving the (invalid)
   address of dynamic FPU features in their init state which are not
   saved in init_fpstate at all

 - Randomize per-CPU entry areas only when KASLR is enabled

* tag 'x86_urgent_for_v6.3_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  selftests/x86/amx: Add a ptrace test
  x86/fpu/xstate: Prevent false-positive warning in __copy_xstate_uabi_buf()
  x86/mm: Do not shuffle CPU entry areas without KASLR

Pull cifs client fixes from Steve French:
 "Twelve cifs/smb3 client fixes (most also for stable)

   - forced umount fix

   - fix for two perf regressions

   - reconnect fixes

   - small debugging improvements

   - multichannel fixes"

* tag 'smb3-client-fixes-6.3-rc3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: fix unusable share after force unmount failure
  cifs: fix dentry lookups in directory handle cache
  smb3: lower default deferred close timeout to address perf regression
  cifs: fix missing unload_nls() in smb2_reconnect()
  cifs: avoid race conditions with parallel reconnects
  cifs: append path to open_enter trace event
  cifs: print session id while listing open files
  cifs: dump pending mids for all channels in DebugData
  cifs: empty interface list when server doesn't support query interfaces
  cifs: do not poll server interfaces too regularly
  cifs: lock chan_lock outside match_session
  cifs: check only tcon status on tcon related functions

Pull nfsd fix from Chuck Lever:

 - Fix a crash when using NFS with krb5p

* tag 'nfsd-6.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix a crash in gss_krb5_checksum()

Pull yet more xfs bug fixes from Darrick Wong:
 "The first bugfix addresses a longstanding problem where we use the
  wrong file mapping cursors when trying to compute the speculative
  preallocation quantity. This has been causing sporadic crashes when
  alwayscow mode is engaged.

  The other two fixes correct minor problems in more recent changes.

   - Fix the new allocator tracepoints because git am mismerged the
     changes such that the trace_XXX got rebased to be in function YYY
     instead of XXX

   - Ensure that the perag AGFL_RESET state is consistent with whatever
     we've just read off the disk

   - Fix a bug where we used the wrong iext cursor during a write begin"

* tag 'xfs-6.3-fixes-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix mismerged tracepoints
  xfs: clear incore AGFL_RESET state if it's not needed
  xfs: pass the correct cursor to xfs_iomap_prealloc_size

Pull xfs percpu counter fixes from Darrick Wong:
 "We discovered a filesystem summary counter corruption problem that was
  traced to cpu hot-remove racing with the call to percpu_counter_sum
  that sets the free block count in the superblock when writing it to
  disk. The root cause is that percpu_counter_sum doesn't cull from
  dying cpus and hence misses those counter values if the cpu shutdown
  hooks have not yet run to merge the values.

  I'm hoping this is a fairly painless fix to the problem, since the
  dying cpu mask should generally be empty. It's been in for-next for a
  week without any complaints from the bots.

   - Fix a race in the percpu counters summation code where the
     summation failed to add in the values for any CPUs that were dying
     but not yet dead. This fixes some minor discrepancies and incorrect
     assertions when running generic/650"

* tag 'xfs-6.3-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  pcpcntr: remove percpu_counter_sum_all()
  fork: remove use of percpu_counter_sum_all
  pcpcntrs: fix dying cpu summation race
  cpumask: introduce for_each_cpu_or

Pull xfs fixes from Darrick Wong:
 "This batch started with some debugging enhancements to the new
  allocator refactoring that we put in 6.3-rc1 to assist developers in
  rebasing their dev branches.

  As for more serious code changes -- there's a bug fix to make the
  lockless allocator scan the whole filesystem before resorting to the
  locking allocator. We're also adding a selftest for the venerable
  directory/xattr hash function to make sure that it produces consistent
  results so that we can address any fallout as soon as possible.

   - Add a few debugging assertions so that people (me) trying to port
     code to the new allocator functions don't mess up the caller
     requirements

   - Relax some overly cautious lock ordering enforcement in the new
     allocator code, which means that file allocations will locklessly
     scan for the best space they can get before backing off to the
     traditional lock-and-really-get-it behavior

   - Add tracepoints to make it easier to trace the xfs allocator
     behavior

   - Actually test the dir/xattr hash algorithm to make sure it produces
     consistent results across all the platforms XFS supports"

* tag 'xfs-6.3-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: test dir/attr hash when loading module
  xfs: add tracepoints for each of the externally visible allocators
  xfs: walk all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags
  xfs: try to idiot-proof the allocators