- 27 Jan, 2017 40 commits
-
-
Jiri Slaby authored
-
Gu Zheng authored
commit 497de07d upstream. This change was missed the tmpfs modification in In CVE-2016-7097 commit 07393101 ("posix_acl: Clear SGID bit when setting file permissions") It can test by xfstest generic/375, which failed to clear setgid bit in the following test case on tmpfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Signed-off-by:
Gu Zheng <guzheng1@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Tariq Saeed authored
commit 3d46a44a upstream. PID: 614 TASK: ffff882a739da580 CPU: 3 COMMAND: "ocfs2dc" #0 [ffff882ecc3759b0] machine_kexec at ffffffff8103b35d #1 [ffff882ecc375a20] crash_kexec at ffffffff810b95b5 #2 [ffff882ecc375af0] oops_end at ffffffff815091d8 #3 [ffff882ecc375b20] die at ffffffff8101868b #4 [ffff882ecc375b50] do_trap at ffffffff81508bb0 #5 [ffff882ecc375ba0] do_invalid_op at ffffffff810165e5 #6 [ffff882ecc375c40] invalid_op at ffffffff815116fb [exception RIP: ocfs2_ci_checkpointed+208] RIP: ffffffffa0a7e940 RSP: ffff882ecc375cf0 RFLAGS: 00010002 RAX: 0000000000000001 RBX: 000000000000654b RCX: ffff8812dc83f1f8 RDX: 00000000000017d9 RSI: ffff8812dc83f1f8 RDI: ffffffffa0b2c318 RBP: ffff882ecc375d20 R8: ffff882ef6ecfa60 R9: ffff88301f272200 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffffffffff R13: ffff8812dc83f4f0 R14: 0000000000000000 R15: ffff8812dc83f1f8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff882ecc375d28] ocfs2_check_meta_downconvert at ffffffffa0a7edbd [ocfs2] #8 [ffff882ecc375d38] ocfs2_unblock_lock at ffffffffa0a84af8 [ocfs2] #9 [ffff882ecc375dc8] ocfs2_process_blocked_lock at ffffffffa0a85285 [ocfs2] assert is tripped because the tran is not checkpointed and the lock level is PR. Some time ago, chmod command had been executed. As result, the following call chain left the inode cluster lock in PR state, latter on causing the assert. system_call_fastpath -> my_chmod -> sys_chmod -> sys_fchmodat -> notify_change -> ocfs2_setattr -> posix_acl_chmod -> ocfs2_iop_set_acl -> ocfs2_set_acl -> ocfs2_acl_set_mode Here is how. 1119 int ocfs2_setattr(struct dentry *dentry, struct iattr *attr) 1120 { 1247 ocfs2_inode_unlock(inode, 1); <<< WRONG thing to do. .. 1258 if (!status && attr->ia_valid & ATTR_MODE) { 1259 status = posix_acl_chmod(inode, inode->i_mode); 519 posix_acl_chmod(struct inode *inode, umode_t mode) 520 { .. 539 ret = inode->i_op->set_acl(inode, acl, ACL_TYPE_ACCESS); 287 int ocfs2_iop_set_acl(struct inode *inode, struct posix_acl *acl, ... 288 { 289 return ocfs2_set_acl(NULL, inode, NULL, type, acl, NULL, NULL); 224 int ocfs2_set_acl(handle_t *handle, 225 struct inode *inode, ... 231 { .. 252 ret = ocfs2_acl_set_mode(inode, di_bh, 253 handle, mode); 168 static int ocfs2_acl_set_mode(struct inode *inode, struct buffer_head ... 170 { 183 if (handle == NULL) { >>> BUG: inode lock not held in ex at this point <<< 184 handle = ocfs2_start_trans(OCFS2_SB(inode->i_sb), 185 OCFS2_INODE_UPDATE_CREDITS); ocfs2_setattr.#1247 we unlock and at #1259 call posix_acl_chmod. When we reach ocfs2_acl_set_mode.#181 and do trans, the inode cluster lock is not held in EX mode (it should be). How this could have happended? We are the lock master, were holding lock EX and have released it in ocfs2_setattr.#1247. Note that there are no holders of this lock at this point. Another node needs the lock in PR, and we downconvert from EX to PR. So the inode lock is PR when do the trans in ocfs2_acl_set_mode.#184. The trans stays in core (not flushed to disc). Now another node want the lock in EX, downconvert thread gets kicked (the one that tripped assert abovt), finds an unflushed trans but the lock is not EX (it is PR). If the lock was at EX, it would have flushed the trans ocfs2_ci_checkpointed -> ocfs2_start_checkpoint before downconverting (to NULL) for the request. ocfs2_setattr must not drop inode lock ex in this code path. If it does, takes it again before the trans, say in ocfs2_set_acl, another cluster node can get in between, execute another setattr, overwriting the one in progress on this node, resulting in a mode acl size combo that is a mix of the two. Orabug: 20189959 Signed-off-by:
Tariq Saeed <tariq.x.saeed@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mintz, Yuval authored
commit 65870fa7 upstream. Until interface is up [and assuming ringparams weren't explicitly configured] when queried for the size of its rings bnx2x would claim they're the maximal size by default. That is incorrect as by default the maximal number of buffers would be equally divided between the various rx rings. This prevents the user from actually setting the number of elements on each rx ring to be of maximal size prior to transitioning the interface into up state. To fix this, make a rough estimation about the number of buffers. It wouldn't always be accurate, but it would be much better than current estimation and would allow users to increase number of buffers during early initialization of the interface. Reported-by:
Seymour, Shane <shane.seymour@hpe.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit f209fa03 upstream. During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on this one over one year ago. Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Wanpeng Li authored
commit b0f48706 upstream. =============================== [ INFO: suspicious RCU usage. ] 4.8.0-rc6+ #5 Not tainted ------------------------------- ./arch/x86/include/asm/msr-trace.h:47 suspicious rcu_dereference_check() usage! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/2/0. stack backtrace: CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.8.0-rc6+ #5 Hardware name: Dell Inc. OptiPlex 7020/0F5C5X, BIOS A03 01/08/2015 0000000000000000 ffff8d1bd6003f10 ffffffff94446949 ffff8d1bd4a68000 0000000000000001 ffff8d1bd6003f40 ffffffff940e9247 ffff8d1bbdfcf3d0 000000000000080b 0000000000000000 0000000000000000 ffff8d1bd6003f70 Call Trace: <IRQ> [<ffffffff94446949>] dump_stack+0x99/0xd0 [<ffffffff940e9247>] lockdep_rcu_suspicious+0xe7/0x120 [<ffffffff9448e0d5>] do_trace_write_msr+0x135/0x140 [<ffffffff9406e750>] native_write_msr+0x20/0x30 [<ffffffff9406503d>] native_apic_msr_eoi_write+0x1d/0x30 [<ffffffff9405b17e>] smp_trace_call_function_interrupt+0x1e/0x270 [<ffffffff948cb1d6>] trace_call_function_interrupt+0x96/0xa0 <EOI> [<ffffffff947200f4>] ? cpuidle_enter_state+0xe4/0x360 [<ffffffff947200df>] ? cpuidle_enter_state+0xcf/0x360 [<ffffffff947203a7>] cpuidle_enter+0x17/0x20 [<ffffffff940df008>] cpu_startup_entry+0x338/0x4d0 [<ffffffff9405bfc4>] start_secondary+0x154/0x180 This can be reproduced readily by running ftrace test case of kselftest. Move the irq_enter() call before ack_APIC_irq(), because irq_enter() tells the RCU susbstems to end the extended quiescent state, so that the following trace call in ack_APIC_irq() works correctly. The same applies to exiting_ack_irq() which calls ack_APIC_irq() after irq_exit(). [ tglx: Massaged changelog ] Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Link: http://lkml.kernel.org/r/1474198491-3738-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Al Viro authored
commit 6f18493e upstream. and lock the right list there Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
-
Robert Doebbelin authored
commit 7cabc61e upstream. There's a race in fuse_direct_IO(), whereby is_sync_kiocb() is called on an iocb that could have been freed if async io has already completed. The fix in this case is simple and obvious: cache the result before starting io. It was discovered by KASan: Kernel: ================================================================== Kernel: BUG: KASan: use after free in fuse_direct_IO+0xb1a/0xcc0 at addr ffff88036c414390 Signed-off-by:
Robert Doebbelin <robert@quobyte.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: bcba24cc ("fuse: enable asynchronous processing direct IO") Signed-off-by:
-
Calvin Owens authored
commit f3951a37 upstream. In sg_common_write(), we free the block request and return -ENODEV if the device is detached in the middle of the SG_IO ioctl(). Unfortunately, sg_finish_rem_req() also tries to free srp->rq, so we end up freeing rq->cmd in the already free rq object, and then free the object itself out from under the current user. This ends up corrupting random memory via the list_head on the rq object. The most common crash trace I saw is this: ------------[ cut here ]------------ kernel BUG at block/blk-core.c:1420! Call Trace: [<ffffffff81281eab>] blk_put_request+0x5b/0x80 [<ffffffffa0069e5b>] sg_finish_rem_req+0x6b/0x120 [sg] [<ffffffffa006bcb9>] sg_common_write.isra.14+0x459/0x5a0 [sg] [<ffffffff8125b328>] ? selinux_file_alloc_security+0x48/0x70 [<ffffffffa006bf95>] sg_new_write.isra.17+0x195/0x2d0 [sg] [<ffffffffa006cef4>] sg_ioctl+0x644/0xdb0 [sg] [<ffffffff81170f80>] do_vfs_ioctl+0x90/0x520 [<ffffffff81258967>] ? file_has_perm+0x97/0xb0 [<ffffffff811714a1>] SyS_ioctl+0x91/0xb0 [<ffffffff81602afb>] tracesys+0xdd/0xe2 RIP [<ffffffff81281e04>] __blk_put_request+0x154/0x1a0 The solution is straightforward: just set srp->rq to NULL in the failure branch so that sg_finish_rem_req() doesn't attempt to re-free it. Additionally, since sg_rq_end_io() will never be called on the object when this happens, we need to free memory backing ->cmd if it isn't embedded in the object itself. KASAN was extremely helpful in finding the root cause of this bug. Signed-off-by:
Calvin Owens <calvinowens@fb.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 22a1e778 upstream. The commit 8dfbcc43 ("[media] xc2028: avoid use after free") tried to address the reported use-after-free by clearing the reference. However, it's clearing the wrong pointer; it sets NULL to priv->ctrl.fname, but it's anyway overwritten by the next line memcpy(&priv->ctrl, p, sizeof(priv->ctrl)). OTOH, the actual code accessing the freed string is the strcmp() call with priv->fname: if (!firmware_name[0] && p->fname && priv->fname && strcmp(p->fname, priv->fname)) free_firmware(priv); where priv->fname points to the previous file name, and this was already freed by kfree(). For fixing the bug properly, this patch does the following: - Keep the copy of firmware file name in only priv->fname, priv->ctrl.fname isn't changed; - The allocation is done only when the firmware gets loaded; - The kfree() is called in free_firmware() commonly Fixes: commit 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Omar Sandoval authored
commit 8ba86821 upstream. get_task_ioprio() accesses the task->io_context without holding the task lock and thus can race with exit_io_context(), leading to a use-after-free. The reproducer below hits this within a few seconds on my 4-core QEMU VM: int main(int argc, char **argv) { pid_t pid, child; long nproc, i; /* ioprio_set(IOPRIO_WHO_PROCESS, 0, IOPRIO_PRIO_VALUE(IOPRIO_CLASS_IDLE, 0)); */ syscall(SYS_ioprio_set, 1, 0, 0x6000); nproc = sysconf(_SC_NPROCESSORS_ONLN); for (i = 0; i < nproc; i++) { pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { pid = fork(); assert(pid != -1); if (pid == 0) { _exit(0); } else { child = wait(NULL); assert(child == pid); } } } pid = fork(); assert(pid != -1); if (pid == 0) { for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } } } for (;;) { /* ioprio_get(IOPRIO_WHO_PGRP, 0); */ syscall(SYS_ioprio_get, 2, 0); } return 0; } This gets us KASAN dumps like this: [ 35.526914] ================================================================== [ 35.530009] BUG: KASAN: out-of-bounds in get_task_ioprio+0x7b/0x90 at addr ffff880066f34e6c [ 35.530009] Read of size 2 by task ioprio-gpf/363 [ 35.530009] ============================================================================= [ 35.530009] BUG blkdev_ioc (Not tainted): kasan: bad access detected [ 35.530009] ----------------------------------------------------------------------------- [ 35.530009] Disabling lock debugging due to kernel taint [ 35.530009] INFO: Allocated in create_task_io_context+0x2b/0x370 age=0 cpu=0 pid=360 [ 35.530009] ___slab_alloc+0x55d/0x5a0 [ 35.530009] __slab_alloc.isra.20+0x2b/0x40 [ 35.530009] kmem_cache_alloc_node+0x84/0x200 [ 35.530009] create_task_io_context+0x2b/0x370 [ 35.530009] get_task_io_context+0x92/0xb0 [ 35.530009] copy_process.part.8+0x5029/0x5660 [ 35.530009] _do_fork+0x155/0x7e0 [ 35.530009] SyS_clone+0x19/0x20 [ 35.530009] do_syscall_64+0x195/0x3a0 [ 35.530009] return_from_SYSCALL_64+0x0/0x6a [ 35.530009] INFO: Freed in put_io_context+0xe7/0x120 age=0 cpu=0 pid=1060 [ 35.530009] __slab_free+0x27b/0x3d0 [ 35.530009] kmem_cache_free+0x1fb/0x220 [ 35.530009] put_io_context+0xe7/0x120 [ 35.530009] put_io_context_active+0x238/0x380 [ 35.530009] exit_io_context+0x66/0x80 [ 35.530009] do_exit+0x158e/0x2b90 [ 35.530009] do_group_exit+0xe5/0x2b0 [ 35.530009] SyS_exit_group+0x1d/0x20 [ 35.530009] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 35.530009] INFO: Slab 0xffffea00019bcd00 objects=20 used=4 fp=0xffff880066f34ff0 flags=0x1fffe0000004080 [ 35.530009] INFO: Object 0xffff880066f34e58 @offset=3672 fp=0x0000000000000001 [ 35.530009] ================================================================== Fix it by grabbing the task lock while we poke at the io_context. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Acked-by:
-
Dan Carpenter authored
commit 210bd104 upstream. We have to unlock before returning -ENOMEM. Fixes: 8dfbcc43 ('[media] xc2028: avoid use after free') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 8dfbcc43 upstream. If struct xc2028_config is passed without a firmware name, the following trouble may happen: [11009.907205] xc2028 5-0061: type set to XCeive xc2028/xc3028 tuner [11009.907491] ================================================================== [11009.907750] BUG: KASAN: use-after-free in strcmp+0x96/0xb0 at addr ffff8803bd78ab40 [11009.907992] Read of size 1 by task modprobe/28992 [11009.907994] ============================================================================= [11009.907997] BUG kmalloc-16 (Tainted: G W ): kasan: bad access detected [11009.907999] ----------------------------------------------------------------------------- [11009.908008] INFO: Allocated in xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] age=0 cpu=3 pid=28992 [11009.908012] ___slab_alloc+0x581/0x5b0 [11009.908014] __slab_alloc+0x51/0x90 [11009.908017] __kmalloc+0x27b/0x350 [11009.908022] xhci_urb_enqueue+0x214/0x14c0 [xhci_hcd] [11009.908026] usb_hcd_submit_urb+0x1e8/0x1c60 [11009.908029] usb_submit_urb+0xb0e/0x1200 [11009.908032] usb_serial_generic_write_start+0xb6/0x4c0 [11009.908035] usb_serial_generic_write+0x92/0xc0 [11009.908039] usb_console_write+0x38a/0x560 [11009.908045] call_console_drivers.constprop.14+0x1ee/0x2c0 [11009.908051] console_unlock+0x40d/0x900 [11009.908056] vprintk_emit+0x4b4/0x830 [11009.908061] vprintk_default+0x1f/0x30 [11009.908064] printk+0x99/0xb5 [11009.908067] kasan_report_error+0x10a/0x550 [11009.908070] __asan_report_load1_noabort+0x43/0x50 [11009.908074] INFO: Freed in xc2028_set_config+0x90/0x630 [tuner_xc2028] age=1 cpu=3 pid=28992 [11009.908077] __slab_free+0x2ec/0x460 [11009.908080] kfree+0x266/0x280 [11009.908083] xc2028_set_config+0x90/0x630 [tuner_xc2028] [11009.908086] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908090] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908094] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908098] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908101] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908105] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908108] do_one_initcall+0x141/0x300 [11009.908111] do_init_module+0x1d0/0x5ad [11009.908114] load_module+0x6666/0x9ba0 [11009.908117] SyS_finit_module+0x108/0x130 [11009.908120] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908123] INFO: Slab 0xffffea000ef5e280 objects=25 used=25 fp=0x (null) flags=0x2ffff8000004080 [11009.908126] INFO: Object 0xffff8803bd78ab40 @offset=2880 fp=0x0000000000000001 [11009.908130] Bytes b4 ffff8803bd78ab30: 01 00 00 00 2a 07 00 00 9d 28 00 00 01 00 00 00 ....*....(...... [11009.908133] Object ffff8803bd78ab40: 01 00 00 00 00 00 00 00 b0 1d c3 6a 00 88 ff ff ...........j.... [11009.908137] CPU: 3 PID: 28992 Comm: modprobe Tainted: G B W 4.5.0-rc1+ #43 [11009.908140] Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 [11009.908142] ffff8803bd78a000 ffff8802c273f1b8 ffffffff81932007 ffff8803c6407a80 [11009.908148] ffff8802c273f1e8 ffffffff81556759 ffff8803c6407a80 ffffea000ef5e280 [11009.908153] ffff8803bd78ab40 dffffc0000000000 ffff8802c273f210 ffffffff8155ccb4 [11009.908158] Call Trace: [11009.908162] [<ffffffff81932007>] dump_stack+0x4b/0x64 [11009.908165] [<ffffffff81556759>] print_trailer+0xf9/0x150 [11009.908168] [<ffffffff8155ccb4>] object_err+0x34/0x40 [11009.908171] [<ffffffff8155f260>] kasan_report_error+0x230/0x550 [11009.908175] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908179] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908182] [<ffffffff8155f5c3>] __asan_report_load1_noabort+0x43/0x50 [11009.908185] [<ffffffff8155ea00>] ? __asan_register_globals+0x50/0xa0 [11009.908189] [<ffffffff8194cea6>] ? strcmp+0x96/0xb0 [11009.908192] [<ffffffff8194cea6>] strcmp+0x96/0xb0 [11009.908196] [<ffffffffa13ba4ac>] xc2028_set_config+0x15c/0x630 [tuner_xc2028] [11009.908200] [<ffffffffa13bac90>] xc2028_attach+0x310/0x8a0 [tuner_xc2028] [11009.908203] [<ffffffff8155ea78>] ? memset+0x28/0x30 [11009.908206] [<ffffffffa13ba980>] ? xc2028_set_config+0x630/0x630 [tuner_xc2028] [11009.908211] [<ffffffffa157a59a>] em28xx_attach_xc3028.constprop.7+0x1f9/0x30d [em28xx_dvb] [11009.908215] [<ffffffffa157aa2a>] ? em28xx_dvb_init.part.3+0x37c/0x5cf4 [em28xx_dvb] [11009.908219] [<ffffffffa157a3a1>] ? hauppauge_hvr930c_init+0x487/0x487 [em28xx_dvb] [11009.908222] [<ffffffffa01795ac>] ? lgdt330x_attach+0x1cc/0x370 [lgdt330x] [11009.908226] [<ffffffffa01793e0>] ? i2c_read_demod_bytes.isra.2+0x210/0x210 [lgdt330x] [11009.908230] [<ffffffff812e87d0>] ? ref_module.part.15+0x10/0x10 [11009.908233] [<ffffffff812e56e0>] ? module_assert_mutex_or_preempt+0x80/0x80 [11009.908238] [<ffffffffa157af92>] em28xx_dvb_init.part.3+0x8e4/0x5cf4 [em28xx_dvb] [11009.908242] [<ffffffffa157a6ae>] ? em28xx_attach_xc3028.constprop.7+0x30d/0x30d [em28xx_dvb] [11009.908245] [<ffffffff8195222d>] ? string+0x14d/0x1f0 [11009.908249] [<ffffffff8195381f>] ? symbol_string+0xff/0x1a0 [11009.908253] [<ffffffff81953720>] ? uuid_string+0x6f0/0x6f0 [11009.908257] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908260] [<ffffffff8104b02f>] ? print_context_stack+0x7f/0xf0 [11009.908264] [<ffffffff812e9846>] ? __module_address+0xb6/0x360 [11009.908268] [<ffffffff8137fdc9>] ? is_ftrace_trampoline+0x99/0xe0 [11009.908271] [<ffffffff811a775e>] ? __kernel_text_address+0x7e/0xa0 [11009.908275] [<ffffffff81240a70>] ? debug_check_no_locks_freed+0x290/0x290 [11009.908278] [<ffffffff8104a24b>] ? dump_trace+0x11b/0x300 [11009.908282] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908285] [<ffffffff81237d71>] ? trace_hardirqs_off_caller+0x21/0x290 [11009.908289] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908292] [<ffffffff812404dd>] ? trace_hardirqs_on+0xd/0x10 [11009.908296] [<ffffffffa13e8143>] ? em28xx_register_extension+0x23/0x190 [em28xx] [11009.908299] [<ffffffff822dcbb0>] ? mutex_trylock+0x400/0x400 [11009.908302] [<ffffffff810021a1>] ? do_one_initcall+0x131/0x300 [11009.908306] [<ffffffff81296dc7>] ? call_rcu_sched+0x17/0x20 [11009.908309] [<ffffffff8159e708>] ? put_object+0x48/0x70 [11009.908314] [<ffffffffa1579f11>] em28xx_dvb_init+0x81/0x8a [em28xx_dvb] [11009.908317] [<ffffffffa13e81f9>] em28xx_register_extension+0xd9/0x190 [em28xx] [11009.908320] [<ffffffffa0150000>] ? 0xffffffffa0150000 [11009.908324] [<ffffffffa0150010>] em28xx_dvb_register+0x10/0x1000 [em28xx_dvb] [11009.908327] [<ffffffff810021b1>] do_one_initcall+0x141/0x300 [11009.908330] [<ffffffff81002070>] ? try_to_run_init_process+0x40/0x40 [11009.908333] [<ffffffff8123ff56>] ? trace_hardirqs_on_caller+0x16/0x590 [11009.908337] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908340] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908343] [<ffffffff8155e926>] ? kasan_unpoison_shadow+0x36/0x50 [11009.908346] [<ffffffff8155ea37>] ? __asan_register_globals+0x87/0xa0 [11009.908350] [<ffffffff8144da7b>] do_init_module+0x1d0/0x5ad [11009.908353] [<ffffffff812f2626>] load_module+0x6666/0x9ba0 [11009.908356] [<ffffffff812e9c90>] ? symbol_put_addr+0x50/0x50 [11009.908361] [<ffffffffa1580037>] ? em28xx_dvb_init.part.3+0x5989/0x5cf4 [em28xx_dvb] [11009.908366] [<ffffffff812ebfc0>] ? module_frob_arch_sections+0x20/0x20 [11009.908369] [<ffffffff815bc940>] ? open_exec+0x50/0x50 [11009.908374] [<ffffffff811671bb>] ? ns_capable+0x5b/0xd0 [11009.908377] [<ffffffff812f5e58>] SyS_finit_module+0x108/0x130 [11009.908379] [<ffffffff812f5d50>] ? SyS_init_module+0x1f0/0x1f0 [11009.908383] [<ffffffff81004044>] ? lockdep_sys_exit_thunk+0x12/0x14 [11009.908394] [<ffffffff822e6936>] entry_SYSCALL_64_fastpath+0x16/0x76 [11009.908396] Memory state around the buggy address: [11009.908398] ffff8803bd78aa00: 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908401] ffff8803bd78aa80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908403] >ffff8803bd78ab00: fc fc fc fc fc fc fc fc 00 00 fc fc fc fc fc fc [11009.908405] ^ [11009.908407] ffff8803bd78ab80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908409] ffff8803bd78ac00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [11009.908411] ================================================================== In order to avoid it, let's set the cached value of the firmware name to NULL after freeing it. While here, return an error if the memory allocation fails. Signed-off-by:
-
Benjamin Poirier authored
commit d667f785 upstream. We received two reports of BUG_ON in bnad_txcmpl_process() where hw_consumer_index appeared to be ahead of producer_index. Out of order write/read of these variables could explain these reports. bnad_start_xmit(), as a producer of tx descriptors, has a few memory barriers sprinkled around writes to producer_index and the device's doorbell but they're not paired with anything in bnad_txcmpl_process(), a consumer. Since we are synchronizing with a device, we must use mandatory barriers, not smp_*. Also, I didn't see the purpose of the last smp_mb() in bnad_start_xmit(). Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Signed-off-by:
-
Vlad Tsyrklevich authored
commit 05692d70 upstream. The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize user-supplied integers, potentially allowing memory corruption. This patch adds appropriate integer overflow checks, checks the range bounds for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set. VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in vfio_pci_set_irqs_ioctl(). Furthermore, a kzalloc is changed to a kcalloc because the use of a kzalloc with an integer multiplication allowed an integer overflow condition to be reached without this patch. kcalloc checks for overflow and should prevent a similar occurrence. Signed-off-by:
Vlad Tsyrklevich <vlad@tsyrklevich.net> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Heinrich Schuchardt authored
commit f4ee2def upstream. Do not copy uninitalized fields th.td_hilen, th.td_data. Signed-off-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by:
John Johansen <john.johansen@canonical.com> Signed-off-by:
-
John Johansen authored
commit 58acf9d9 upstream. the policy_lock parameter is a one way switch that prevents policy from being further modified. Unfortunately some of the module parameters can effectively modify policy by turning off enforcement. split policy_admin_capable into a view check and a full admin check, and update the admin check to test the policy_lock parameter. Signed-off-by:
-
John Johansen authored
commit 5f20fdfe upstream. BugLink: http://bugs.launchpad.net/bugs/1592547 If unpack_dfa() returns NULL due to the dfa not being present, profile_unpack() is not checking if the dfa is not present (NULL). Signed-off-by:
-
John Johansen authored
commit 3197f5ad upstream. Signed-off-by:
-
John Johansen authored
commit 15756178 upstream. Signed-off-by:
-
John Johansen authored
commit de7c4cc9 upstream. When finding a child profile via an rcu critical section, the profile may be put and scheduled for deletion after the child is found but before its refcount is incremented. Protect against this by repeating the lookup if the profiles refcount is 0 and is one its way to deletion. Signed-off-by:
Seth Arnold <seth.arnold@canonical.com> Signed-off-by:
-
John Johansen authored
commit 23ca7b64 upstream. Signed-off-by:
-
John Johansen authored
commit f7da2de0 upstream. The target profile name was not being correctly audited in a few cases because the target variable was not being set and gotos passed the code to set it at apply: Since it is always based on new_profile just drop the target var and conditionally report based on new_profile. Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
John Johansen authored
commit 7ee6da25 upstream. Currently logging of a successful profile load only logs the basename of the profile. This can result in confusion when a child profile has the same name as the another profile in the set. Logging the hname will ensure there is no confusion. Signed-off-by:
-
John Johansen authored
commit bf15cf0c upstream. currently only the profile that is causing the failure is logged. This makes it more confusing than necessary about which profiles loaded and which didn't. So make sure to log success and failure messages for all profiles in the set being loaded. Signed-off-by:
-
John Johansen authored
commit f351841f upstream. Signed-off-by:
-
John Johansen authored
commit bd35db8b upstream. Internal mounts are not mounted anywhere and as such should be treated as disconnected paths. Signed-off-by:
-
John Johansen authored
commit f2e561d1 upstream. Bind mounts can fail to be properly reconnected when PATH_CONNECT is specified. Ensure that when PATH_CONNECT is specified the path has a root. BugLink: http://bugs.launchpad.net/bugs/1319984Signed-off-by:
-
John Johansen authored
commit d671e890 upstream. Signed-off-by:
-
John Johansen authored
commit 9049a792 upstream. The current behavior is confusing as it causes exec failures to report the executable is missing instead of identifying that apparmor caused the failure. Signed-off-by:
-
John Johansen authored
commit b6b1b81b upstream. BugLink: http://bugs.launchpad.net/bugs/1268727 The task field in the lsm_audit struct needs to be initialized if a change_hat fails, otherwise the following oops will occur BUG: unable to handle kernel paging request at 0000002fbead7d08 IP: [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50 PGD 1e3f35067 PUD 0 Oops: 0002 [#1] SMP Modules linked in: pppox crc_ccitt p8023 p8022 psnap llc ax25 btrfs raid6_pq xor xfs libcrc32c dm_multipath scsi_dh kvm_amd dcdbas kvm microcode amd64_edac_mod joydev edac_core psmouse edac_mce_amd serio_raw k10temp sp5100_tco i2c_piix4 ipmi_si ipmi_msghandler acpi_power_meter mac_hid lp parport hid_generic usbhid hid pata_acpi mpt2sas ahci raid_class pata_atiixp bnx2 libahci scsi_transport_sas [last unloaded: tipc] CPU: 2 PID: 699 Comm: changehat_twice Tainted: GF O 3.13.0-7-generic #25-Ubuntu Hardware name: Dell Inc. PowerEdge R415/08WNM9, BIOS 1.8.6 12/06/2011 task: ffff8802135c6000 ti: ffff880212986000 task.ti: ffff880212986000 RIP: 0010:[<ffffffff8171153e>] [<ffffffff8171153e>] _raw_spin_lock+0xe/0x50 RSP: 0018:ffff880212987b68 EFLAGS: 00010006 RAX: 0000000000020000 RBX: 0000002fbead7500 RCX: 0000000000000000 RDX: 0000000000000292 RSI: ffff880212987ba8 RDI: 0000002fbead7d08 RBP: ffff880212987b68 R08: 0000000000000246 R09: ffff880216e572a0 R10: ffffffff815fd677 R11: ffffea0008469580 R12: ffffffff8130966f R13: ffff880212987ba8 R14: 0000002fbead7d08 R15: ffff8800d8c6b830 FS: 00002b5e6c84e7c0(0000) GS:ffff880216e40000(0000) knlGS:0000000055731700 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000002fbead7d08 CR3: 000000021270f000 CR4: 00000000000006e0 Stack: ffff880212987b98 ffffffff81075f17 ffffffff8130966f 0000000000000009 0000000000000000 0000000000000000 ffff880212987bd0 ffffffff81075f7c 0000000000000292 ffff880212987c08 ffff8800d8c6b800 0000000000000026 Call Trace: [<ffffffff81075f17>] __lock_task_sighand+0x47/0x80 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50 [<ffffffff81075f7c>] do_send_sig_info+0x2c/0x80 [<ffffffff81075fee>] send_sig_info+0x1e/0x30 [<ffffffff8130242d>] aa_audit+0x13d/0x190 [<ffffffff8130c1dc>] aa_audit_file+0xbc/0x130 [<ffffffff8130966f>] ? apparmor_cred_prepare+0x2f/0x50 [<ffffffff81304cc2>] aa_change_hat+0x202/0x530 [<ffffffff81308fc6>] aa_setprocattr_changehat+0x116/0x1d0 [<ffffffff8130a11d>] apparmor_setprocattr+0x25d/0x300 [<ffffffff812cee56>] security_setprocattr+0x16/0x20 [<ffffffff8121fc87>] proc_pid_attr_write+0x107/0x130 [<ffffffff811b7604>] vfs_write+0xb4/0x1f0 [<ffffffff811b8039>] SyS_write+0x49/0xa0 [<ffffffff8171a1bf>] tracesys+0xe1/0xe6 Signed-off-by:
-
John Johansen authored
commit ec34fa24 upstream. When set atomic replacement is used and the parent is updated before the child, and the child did not exist in the old parent so there is no direct replacement then the new child is incorrectly added to the old parent. This results in the new parent not having the child(ren) that it should and the old parent when being destroyed asserting the following error. AppArmor: policy_destroy: internal error, policy '<profile/name>' still contains profiles Signed-off-by:
-
John Johansen authored
commit dcda617a upstream. Signed-off-by:
-
Sachin Prabhu authored
commit d171356f upstream. Patch a6b5058f results in -EREMOTE returned by is_path_accessible() in cifs_mount() to be ignored which breaks DFS mounting. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Sachin Prabhu authored
commit 348c1bfa upstream. Signed-off-by:
-
Sachin Prabhu authored
commit c1d8b24d upstream. The patch Fs/cifs: make share unaccessible at root level mountable makes use of prepaths when any component of the underlying path is inaccessible. When mounting 2 separate shares having different prepaths but are other wise similar in other respects, we end up sharing superblocks when we shouldn't be doing so. Signed-off-by:
-
Sachin Prabhu authored
commit 4214ebf4 upstream. Fix memory leaks introduced by the patch Fs/cifs: make share unaccessible at root level mountable Also move allocation of cifs_sb->prepath to cifs_setup_cifs_sb(). Signed-off-by:
-
Aurelien Aptel authored
commit a6b5058f upstream. if, when mounting //HOST/share/sub/dir/foo we can query /sub/dir/foo but not any of the path components above: - store the /sub/dir/foo prefix in the cifs super_block info - in the superblock, set root dentry to the subpath dentry (instead of the share root) - set a flag in the superblock to remember it - use prefixpath when building path from a dentry fixes bso#8950 Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Benjamin Poirier authored
commit 277964e1 upstream. vmxnet3_reset_work() expects tx queues to be stopped (via vmxnet3_quiesce_dev -> netif_tx_disable). However, this races with the netif_wake_queue() call in netif_tx_timeout() such that the driver's start_xmit routine may be called unexpectedly, triggering one of the BUG_ON in vmxnet3_map_pkt with a stack trace like this: RIP: 0010:[<ffffffffa00cf4bc>] vmxnet3_map_pkt+0x3ac/0x4c0 [vmxnet3] [<ffffffffa00cf7e0>] vmxnet3_tq_xmit+0x210/0x4e0 [vmxnet3] [<ffffffff813ab144>] dev_hard_start_xmit+0x2e4/0x4c0 [<ffffffff813c956e>] sch_direct_xmit+0x17e/0x1e0 [<ffffffff813c96a7>] __qdisc_run+0xd7/0x130 [<ffffffff813a6a7a>] net_tx_action+0x10a/0x200 [<ffffffff810691df>] __do_softirq+0x11f/0x260 [<ffffffff81472fdc>] call_softirq+0x1c/0x30 [<ffffffff81004695>] do_softirq+0x65/0xa0 [<ffffffff81069b89>] local_bh_enable_ip+0x99/0xa0 [<ffffffffa031ff36>] destroy_conntrack+0x96/0x110 [nf_conntrack] [<ffffffff813d65e2>] nf_conntrack_destroy+0x12/0x20 [<ffffffff8139c6d5>] skb_release_head_state+0xb5/0xf0 [<ffffffff8139d299>] skb_release_all+0x9/0x20 [<ffffffff8139cfe9>] __kfree_skb+0x9/0x90 [<ffffffffa00d0069>] vmxnet3_quiesce_dev+0x209/0x340 [vmxnet3] [<ffffffffa00d020a>] vmxnet3_reset_work+0x6a/0xa0 [vmxnet3] [<ffffffff8107d7cc>] process_one_work+0x16c/0x350 [<ffffffff810804fa>] worker_thread+0x17a/0x410 [<ffffffff810848c6>] kthread+0x96/0xa0 [<ffffffff81472ee4>] kernel_thread_helper+0x4/0x10 Signed-off-by:
-
Trond Myklebust authored
commit 809fd143 upstream. If the OPEN rpc call to the server fails with an ENOENT call, nfs_atomic_open will create a negative dentry for that file, however it currently fails to call nfs_set_verifier(), thus causing the dentry to be immediately revalidated on the next call to nfs_lookup_revalidate() instead of following the usual lookup caching rules. Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
